14-703.fm Page 1 Wednesday, June 30, 1999 4:56 PM
Cat. No. 14-703
OWNER’S MANUAL
Please read before using this equipment.
SCR-63
Extended Bass AM/FM Stereo
Dual-Cassette Recorder
14-703.fm Page 3 Wednesday, June 30, 1999 4:56 PM
CONTENTS
Connections.......................................................................................................... 4
Connecting Power............................................................................................ 4
Using AC Power .......................................................................................... 4
Installing Batteries ....................................................................................... 4
Using Headphones .......................................................................................... 5
Listening Safely ........................................................................................... 5
Traffic Safety ............................................................................................... 5
Operation............................................................................................................... 6
Playing the Radio............................................................................................. 6
Loading a Cassette Tape ................................................................................. 6
Playing a Cassette Tape .................................................................................. 7
Consecutive Play ......................................................................................... 8
Recording......................................................................................................... 8
Recording Tips ............................................................................................ 8
Recording from the Radio ............................................................................ 9
Making a Live Recording.............................................................................. 9
Dubbing (Copying) a Cassette Tape.......................................................... 10
Tape Tips ............................................................................................................. 12
Erasing a Cassette Tape................................................................................ 12
Preventing Accidental Erasure....................................................................... 12
Restoring Tape Tension and Sound Quality................................................... 12
Care and Maintenance ....................................................................................... 13
Cleaning the Tape-Handling Parts ................................................................. 13
The FCC Wants You to Know ........................................................................ 14
Specifications ..................................................................................................... 15
3
14-703.fm Page 4 Wednesday, June 30, 1999 4:56 PM
CONNECTIONS
• Always plug the power cord into
the system before you plug it into
a standard AC outlet. Always
unplug it from the AC outlet before
you unplug it from the system.
CONNECTING POWER
You can power your system using ei-
ther AC power or six D batteries (not
supplied).
Installing Batteries
Using AC Power
You can power the system with six D
batteries (not supplied). For the best
performance, we recommend alkaline
batteries, such as Cat. No. 23-550.
The supplied power cord stored inside
the battery compartment lets you power
the system from a standard AC outlet.
Cautions:
• Use only fresh batteries of the
required size and type.
• Never leave dead or weak batter-
ies in the system.
• If you do not plan to use the sys-
tem for several days, or if you plan
to power the system using only
AC power, remove the batteries.
1. While pressing down both tabs on
the battery compartment cover in
the direction of the arrow, pull the
cover down to remove it.
• Dispose of batteries promptly and
properly; do not bury or burn
them.
2. Remove the power cord from its
storage area in the battery com-
partment, then replace the cover.
Follow these steps to install batteries.
3. Plug the small end of the power
cord into the AC jack on the back
of the system. Then plug the cord
into a standard AC outlet.
Cautions:
• To prevent electric shock, one
blade on the power cord’s plug is
wider than the other and the plug
fits only one way. If you cannot
easily insert the plug, turn it over
and try again. Do not force it.
1. While pressing down both tabs on
the battery compartment cover in
the direction of the arrow, pull the
cover down to remove it.
4
14-703.fm Page 5 Wednesday, June 30, 1999 4:56 PM
2. Remove the power cord from its
storage area in the battery com-
partment.
Listening Safely
To protect your hearing, follow these
guidelines when you use headphones.
3. Install the batteries as indicated
by the polarity symbols (+ and –)
marked inside the compartment.
• Set the volume to the lowest set-
ting before you begin listening.
After you put on the headphones,
adjust the volume to a comfortable
level.
4. Replace the battery compartment
cover.
If the system’s sound becomes weak
or distorted, replace the batteries.
• Do not listen at extremely high
volume levels. Extended high-
volume listening can lead to per-
manent hearing loss.
USING HEADPHONES
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a
level that does not cause discom-
fort might still damage your hear-
ing.
Traffic Safety
To listen to the system without disturb-
ing others, plug a pair of stereo head-
phones with a 1/8-inch plug (not
Do not wear headphones while oper-
ating a motor vehicle or riding a bicy-
cle. This can create a traffic hazard
and is illegal in some areas.
PHONES
supplied) into the system’s
jack. This mutes the system’s speak-
ers. Your local RadioShack store sells
a wide selection of headphones.
Even though some headphones are
designed to let you hear some outside
sounds when listening at normal vol-
ume levels, they still present a traffic
hazard.
5
14-703.fm Page 6 Wednesday, June 30, 1999 4:56 PM
OPERATION
PLAYING THE RADIO
LOADING A CASSETTE
TAPE
Your system has two cassette decks.
You can use Deck 1 (PLAYBACK) for
normal playback and consecutive
play. You can use Deck 2 (RECORD/
PLAYBACK) for normal playback,
consecutive play, and dubbing (re-
cording).
1. Set TAPE (POWER OFF)/RADIO to
RADIO.
2. Set AM/FM/-STEREO to the de-
sired band and rotate TUNING to
tune to the desired station.
The control buttons for each deck are
located over the deck.
3. Adjust VOLUME to a comfortable
listening level.
Note: Before playing or recording any
cassette tape, take up any slack in the
tape by turning one of the cassette’s
hubs with a pencil. If you do not re-
move excess slack, the tape might be-
come tangled in the record/playback
mechanism.
4. Set E-BASS to ON to enhance the
bass effect or to OFF for normal
bass effect.
5. To turn off the radio, set TAPE
(POWER OFF)/RADIO to TAPE
(POWER OFF).
Notes:
• The SCR-63’s AM/FM radio has
two antennas. The AM antenna is
built-in. For the best AM reception,
turn the system. For the best FM
reception, fully extend and adjust
the telescoping antenna.
1. Press STOP/EJECT to open the
cassette compartment door.
• If you set AM/FM/-STEREO to
-STEREO and a station is received
in stereo, the FM STEREO indica-
tor on the front of the system
lights steadily.
• To improve the reception of a weak
FM station, set AM/FM/-STEREO to
FM. The signal changes from ste-
reo to monaural, but the reception
should improve.
6
14-703.fm Page 7 Wednesday, June 30, 1999 4:56 PM
2. Load the cassette tape with its
open edge up, the desired side
facing out, and the full reel to the
right.
• To fast-forward or rewind the
STOP/EJECT
tape, press
tape is playing), then press
FAST-F REWIND
STOP/EJECT
(if the
or
.
Press
when the tape
reaches the desired location.
3. Gently close the cassette com-
partment door.
PLAYING A CASSETTE
TAPE
You can play a cassette tape in either
Deck 1 or Deck 2, or you can load
tapes in both decks and play them
consecutively.
VOLUME
4. Adjust
to the desired lis-
ON
to enhance the
tening level.
E-BASS
5. Set
to
1. Load a cassette tape.
OFF
bass effect or to
bass effect.
for normal
TAPE (POWER OFF)/RADIO
2. Set
to
TAPE (POWER OFF)
.
STOP/EJECT
6. Press
to stop the
PLAY
3. Press
on the deck you are
STOP/EJECT
tape. Press
again to
using. The tape plays until it
reaches the end of the side, then
automatically stops.
open the cassette compartment
door, then remove the tape.
Notes:
• To temporarily stop playback,
PAUSE
press
are using. Press
to continue playback.
on the deck you
PAUSE
again
7
14-703.fm Page 8 Wednesday, June 30, 1999 4:56 PM
(copy) from one cassette tape to an-
other.
Consecutive Play
You can set the system to play one
side of a tape in Deck 1, then auto-
matically play one side of a tape in
Deck 2.
Notes:
• The recording level is preset.
Adjusting VOLUME or E-BASS
does not affect the recording level.
1. Load the cassette tape you want
to hear first in Deck 1, then load
the other cassette tape in Deck 2.
• Most material on compact discs
and prerecorded tapes is copy-
righted. Unauthorized duplication
of copyrighted material is a viola-
tion of the copyright laws of most
countries and such duplication
may result in fines and/or impris-
onment. Note, however, that in the
United States, it is not a violation
of U.S. copyright laws for a con-
sumer to use an audio recording
device to duplicate musical
recordings for noncommercial
(personal) use.
2. Gently close both cassette com-
partment doors.
3. Set TAPE (POWER OFF)/RADIO to
TAPE (POWER OFF).
4. Press PLAY on Deck 1.
5. Press PAUSE then PLAY on Deck
2. The tape in Deck 1 plays until it
reaches the end of the side, then
the tape in Deck 2 plays until it
reaches the end of the side.
Recording Tips
• Tape quality greatly affects the
quality of the recording. We rec-
ommend extended-range or low-
noise type 1 regular length (60- or
90-minute) normal-bias cassette
tapes. We do not recommend
long-play cassette tapes such as
C-120s because they are thin and
can easily tangle.
To stop consecutive play before the
tape in Deck 2 reaches the end and
automatically stops, press STOP/
EJECT on the deck that is playing.
• Before recording, be sure the tape
you are recording on has its
erase-protection tabs in place
(see “Preventing Accidental Era-
sure” on Page 12).
RECORDING
You can record onto a cassette tape
from the radio, use the built-in micro-
phone to make a live recording, or dub
8
14-703.fm Page 9 Wednesday, June 30, 1999 4:56 PM
5. When you are finished, press
STOP/EJECT on Deck 2 to stop the
tape. RECORD and PLAY release.
Recording from the Radio
1. Load a blank tape, or one you
want to record over, into Deck 2.
Note: The deck automatically stops
when the tape reaches the end.
2. Set TAPE (POWER OFF)/RADIO to
RADIO.
3. Set AM/FM/-STEREO to the de-
sired band and rotate TUNING to
tune to the desired station.
Making a Live Recording
You can use the built-in microphone to
make a live recording.
Note: Sometimes, AM broad-
casts produce a whistling sound
that you can hear while playing a
recording. If you hear this sound,
set DUBBING MIC/NORM/HIGH to
HIGH (AM BEAT CUT) to help
reduce or eliminate it.
1. Load a blank tape, or one you
want to record over, into Deck 2.
2. Set DUBBING MIC/NORM/HIGH to
MIC.
3. Set TAPE (POWER OFF)/RADIO to
4. Press RECORD on Deck 2.
RECORD and PLAY both lock
down.
TAPE (POWER OFF).
4. Place the system 2-3 feet from the
live recording source.
5. Press RECORD on Deck 2.
RECORD and PLAY both lock
down.
PAUSE on Deck 2 to
Note: Press
temporarily stop recording. Press
PAUSE again to resume recording.
9
14-703.fm Page 10 Wednesday, June 30, 1999 4:56 PM
PAUSE
PAUSE
RECORD
RECORD
on
Note: Press
temporarily stop recording. Press
PAUSE
on Deck 2 to
5. Press
Deck 2.
lock down.
then
PLAY
and
both
again to resume recording.
6. When you are finished, press
STOP/EJECT
on Deck 2 to stop the
RECORD PLAY
tape.
and
release.
Note: The deck automatically stops
when the tape reaches the end.
PLAY
6. Press
on Deck 1 to begin
on Deck 2 auto-
PAUSE
copying.
Dubbing (Copying) a
Cassette Tape
matically releases.
You can easily copy a tape by playing
it in Deck 1 and recording it onto an-
other tape in Deck 2.
Follow these steps to copy a cassette
tape.
Notes:
1. Load a blank tape, or one you
want to record over, into Deck 2.
• You can listen to the tape play-
ing in Deck 1 as you copy it.
2. Load the tape you want to copy
into Deck 1.
VOLUME
Adjust
to the desired
VOL-
listening level. (Adjusting
UME
ing level).
does not affect the record-
DUBBING MIC/NORM/HIGH
NORM
(to record at twice the
normal speed).
3. Set
to
(to record at normal speed)
HIGH
or
• The tape’s sound is distorted if
DUBBING MIC/NORM/
you set
HIGH
HIGH
to
and listen to the
tape playing in Deck 1 as you
copy it.
• To temporarily stop recording
on the tape loaded in Deck 2,
PAUSE
press
on Deck 2. The
TAPE (POWER OFF)/RADIO
4. Set
to
tape in Deck 2 stops, and the
tape in Deck 1 continues to
TAPE (POWER OFF)
.
PAUSE
play. Press
on Deck 2
again to resume recording.
10
14-703.fm Page 11 Wednesday, June 30, 1999 4:56 PM
7. To stop copying before the tape
ends, press STOP/EJECT on Deck
2. RECORD and PLAY on Deck 2
release. Press STOP/EJECT on
Deck 1 to stop that tape.
11
14-703.fm Page 12 Wednesday, June 30, 1999 4:56 PM
TAPE TIPS
ERASING A CASSETTE
TAPE
To record over a cassette tape, simply
record as usual. The system records
over the previous recording.
Caution: Removing the erase-protec-
tion tabs does not prevent a bulk eras-
er from erasing a cassette tape.
You can quickly erase both sides of a
cassette tape using a bulk tape eras-
er, such as Cat. No. 44-232.
RESTORING TAPE
TENSION AND SOUND
QUALITY
PREVENTING
ACCIDENTAL ERASURE
Cassette tapes have two erase-pro-
tection tabs — one for each side.
When a tab is in place, you can record
on that side. To protect a recording
from being accidentally recorded over,
use a screwdriver to remove one or
both of the cassette tape’s erase-pro-
tection tabs. This prevents RECORD
from being pressed.
After you play a cassette tape several
times, the tape might become tightly
wound on the reels. This can cause
playback sound quality to deteriorate.
To restore the sound quality, fast-for-
ward the tape from the beginning to
the end of one side, then completely
rewind it. Then loosen the tape reels
by gently tapping each side of the cas-
sette’s outer shell on a flat surface.
Caution: Be careful not to damage
the cassette when tapping it. Do not
touch the exposed tape or allow any
sharp objects near the cassette.
If you later decide to record on a tape
side after you have removed the
erase-protection tab for that side,
place a piece of strong plastic tape
over that side’s erase-protection hole.
Be sure you cover only the hole origi-
nally covered by the erase-protection
tab.
12
14-703.fm Page 13 Wednesday, June 30, 1999 4:56 PM
CARE AND MAINTENANCE
Your Optimus SCR-63 Extended Bass
AM/FM Stereo Dual-Cassette Record-
er is an example of superior design
and craftsmanship. The following sug-
gestions will help you care for the sys-
tem so you can enjoy it for years.
Use only fresh batteries of
the required size and type.
Always remove old or weak
batteries. They can leak
chemicals that can destroy
electronic circuits.
Modifying or tampering with the sys-
tem’s internal components can cause
a malfunction and might invalidate the
system’s warranty and void your FCC
authorization to operate it. If your sys-
tem is not performing as it should,
take it to your local RadioShack store
for assistance.
Keep the system dry. If it
gets wet, wipe it dry immedi-
ately. Liquids can contain
minerals that can corrode
the electronic circuits.
Handle the system gently
and carefully. Dropping it
can damage circuit boards
and cases and can cause
the system to work improp-
erly.
CLEANING THE TAPE-
HANDLING PARTS
Use and store the system
only in normal temperature
environments. Temperature
extremes can shorten the
life of electronic devices,
damage batteries, and dis-
tort or melt plastic parts.
Dirt, dust or particles of the tape’s
coating can accumulate on the tape
heads and other parts that the tape
touches. This can greatly reduce the
performance of the cassette recorder.
Use the following cleaning procedure
after every 20 hours of tape player op-
eration.
Keep the system away from
dust and dirt, which can
cause premature wear of
parts.
1. Remove the batteries and discon-
nect the AC power cord.
2. Open the cassette compartment
doors on Deck 1 and Deck 2.
3. Press PLAY on Deck 1 to expose
Wipe the system with a
damp cloth occasionally to
keep it looking new. Do not
use harsh chemicals, clean-
ing solvents, or strong deter-
gents to clean it.
Deck 1’s tape-handling parts.
13
14-703.fm Page 14 Wednesday, June 30, 1999 4:56 PM
4. While pressing and holding down
the erase-protection tab sensor
inside Deck 2, press RECORD on
Deck 2. RECORD and PLAY on
Deck 2 both lock down. This
exposes Deck 2’s record/playback
head and erase head.
THE FCC WANTS YOU
TO KNOW
Your system might cause TV or radio
interference even when it is operating
properly. To determine whether your
system is causing the interference,
turn off your system. If the interfer-
ence goes away, your system is caus-
ing the interference. Try to eliminate
the interference by:
5. Use a cotton swab dipped in
denatured alcohol or tape head
cleaning solution to clean the
record/play heads, tape guides,
pinch rollers, capstans, and erase
head.
• Moving your system away from
the receiver.
• Connecting your system to an out-
let that is on a different electrical
circuit from the receiver.
• Contacting
your
local
Ra-
dioShack store for help.
If you cannot eliminate the interfer-
ence, the FCC requires that you stop
using your system.
6. When you finish cleaning, press
STOP/EJECT on Deck 1 and Deck
2, then close both cassette com-
partment doors and reconnect
power.
Your local RadioShack store has a
complete line of cassette deck clean-
ing supplies.
14
14-703.fm Page 15 Wednesday, June 30, 1999 4:56 PM
SPECIFICATIONS
RADIO
Frequency Range:
FM...................................................................................................88–108 MHz
AM.............................................................................................. 530–1710 MHz
Antenna:
FM................................................................................................. Rod Antenna
AM.......................................................................................Ferrite Bar Antenna
CASSETTE PLAYER
Track System:
Magnet Head ..........................................................................................2-Track
Tape ........................................................................................................4-Track
Tape Speed .................................................................................................... 17/8 ips
Recording System ............................................................................AC Bias 85 kHz
Erasing System ...........................................................................................Magnetic
Wow and Flutter (WTD RMS).......................................................................... 0.4 %
Tape Type.........................................................................Type-1, Normal-Bias Only
GENERAL
Power Source........................................................AC 120V, 60 Hz; or 6 D Batteries
Maximum Output Power....................................................................... 2 x 1.2 Watts
Power Consumption .............................................................................. Approx. 8 W
Dimensions (HWD)...............................................................65/8 x 205/8 x 61/8 Inches
(168 x 524 x 156 mm)
Weight .......................................................................................................... 81.1 oz
(2.3 kg)
Specifications are typical; individual units might vary. Specifications are subject to
change and improvement without notice.
15
14-703.fm Page 16 Wednesday, June 30, 1999 4:56 PM
RadioShack Limited Warranty
This product is warranted against defects for 90 days from date of purchase from
RadioShack company-owned stores and authorized RadioShack franchisees and deal-
ers. Within this period, we will repair it without charge for parts and labor. Simply bring
your RadioShack sales slip as proof of purchase date to any RadioShack store. War-
ranty does not cover transportation costs. Nor does it cover a product subjected to mis-
use or accidental damage.
EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES
AND ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION
OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. Some states do
not permit limitation or exclusion of implied warranties; therefore, the aforesaid limita-
tion(s) or exclusion(s) may not apply to the purchaser.
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state.
We Service What We Sell
10/95
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
8A6
Printed in Hong Kong
|