14-1225.fm Page 1 Friday, July 2, 1999 9:00 AM
Cat. No. 14-1225
OWNER’S MANUAL
Please read before using this equipment.
SCP-84
Auto-Reverse
AM²FM Stereo
Cassette Player
14-1225.fm Page 3 Friday, July 2, 1999 9:00 AM
E-BASS IN/OUT Switch — lets you increase bass
sounds to suit your listening preferences.
9 kHz/10kHz Switch — lets you set the frequency tuning
increments between stations for tuning in the United
States as well as abroad.
PHONES Jack — lets you connect headphones for pri-
vate listening, or speakers to share the sound with oth-
ers.
Three Power Options — let you power the SCP-84 from
internal batteries, standard AC power (with an optional
AC adapter), or your vehicle’s cigarette-lighter socket
(with an optional DC adapter).
Removable Belt Clip — lets you attach the SCP-84 to
your belt for hands-free carrying when you are on the go.
Lock Switch — lets you lock the currently tuned station
to prevent accidentally changing it.
Note: You need a pair of headphones or amplified
1
speakers (neither supplied), with a /8-inch plug, to oper-
ate your SCP-84. Your local RadioShack store sells a
wide variety of headphones and speakers.
3
14-1225.fm Page 4 Friday, July 2, 1999 9:00 AM
CONTENTS
Preparation .................................................................. 5
Attaching the Belt Clip ............................................ 5
Powering the SCP-84 ............................................. 6
Using Batteries ................................................... 6
Using AC Power ................................................. 8
Using Your Vehicle’s Cigarette-Lighter Socket . 10
Setting the Clock .................................................. 12
Setting the 9kHz/10kHz Switch ............................ 14
Connecting Headphones or Amplified Speakers .. 15
Listening Safely ................................................ 16
Traffic Safety ..................................................... 16
Using the Radio ......................................................... 17
Listening to the Radio ........................................... 17
Storing Radio Stations in Memory ........................ 20
Using Lock ............................................................ 22
Using the Cassette Player ........................................ 23
Playing a Cassette Tape ....................................... 23
Using the Alarm ........................................................ 27
Setting the Alarm Time ......................................... 27
Turning the Alarm On/Off ...................................... 28
Care and Maintenance .............................................. 29
The FCC Wants You to Know ............................... 30
Cleaning the Tape-Handling Parts ........................ 31
Restoring Tape Tension and Sound Quality ......... 32
Specifications ............................................................ 33
4
14-1225.fm Page 5 Friday, July 2, 1999 9:00 AM
PREPARATION
ATTACHING THE BELT CLIP
To attach the belt clip to the SCP-84, press the clip’s
three latches into the corresponding holes on the back of
the SCP-84. Then push the clip upward until it locks into
place.
(illus)
To remove the belt clip, press down at the point where
the clip attaches to the SCP-84, then slide off the clip.
(illus)
5
14-1225.fm Page 6 Friday, July 2, 1999 9:00 AM
POWERING THE SCP-84
You can power your SCP-84 from any of three power
sources:
• Internal batteries (not supplied)
• Standard AC power (with an optional AC adapter)
• Your vehicle’s cigarette-lighter socket (with an
optional DC adapter)
Note: Connecting an optional adapter disconnects inter-
nal batteries.
Using Batteries
You can power your SCP-84 from two AA batteries. We
recommend alkaline batteries, such as RadioShack Cat.
No. 23-557, not supplied. You can also use rechargeable
nickel-cadmium batteries (such as Cat. No. 23-125, not
supplied). If you use rechargeable batteries, you also
need a battery charger (such as Cat. No. 23-133, not
supplied).
6
14-1225.fm Page 7 Friday, July 2, 1999 9:00 AM
Cautions:
• Do not mix old and new batteries, different types of
batteries (standard, alkaline, and nickel-cadmium), or
rechargeable batteries of different capacities in the
SCP-84.
• Use only fresh batteries of the required size and type.
Follow these steps to install batteries.
(illus)
1. Press down on the battery compartment cover and
slide it in the direction of the arrow to remove it.
2. Install the batteries over the ribbon inside the com-
partment as indicated by the positive (+) polarity sym-
bols marked inside.
3. Replace the cover.
7
14-1225.fm Page 8 Friday, July 2, 1999 9:00 AM
Cautions:
• Never leave dead or weak batteries in the SCP-84.
• If you do not plan to use the SCP-84 for a month or
more, or if you plan to use only AC or vehicle battery
power, remove the batteries.
• Dispose of batteries promptly and properly; do not
bury or burn them.
Note: If your SCP-84 locks up, simply remove one of the
batteries then reinstall it.
Important: Your SCP-84 is capable of using recharge-
able nickel-cadmium batteries. At the end of the batteries’
useful life, they must be recycled or disposed of properly.
Contact your local, county, or state hazardous waste
management authorities for information on recycling or
disposal programs in your area. Some options that might
be available are: municipal curbside collection, drop-off
boxes at retailers, recycling collection centers, and mail-
back programs.
Using AC Power
You can power the SCP-84 from a standard AC outlet us-
ing an AC adapter (such as Cat. No. 273-1654, not sup-
plied).
8
14-1225.fm Page 9 Friday, July 2, 1999 9:00 AM
Cautions:
• The recommended AC adapter supplies 3 volts and
delivers at least 300 milliamps. Its center tip is set to
negative, and its plug correctly fits the DC 3V jack on
the bottom of the SCP-84. Using an adapter that
does not meet these specifications could damage the
SCP-84 or the adapter.
• Always plug the AC adapter’s barrel plug into the
SCP-84 before you plug its power module into the
AC outlet, and unplug its power module from the AC
outlet before you unplug its barrel plug from the SCP-
84.
Follow these steps to connect an AC adapter to the SCP-
84.
(illus)
1. Set the adapter’s voltage switch to 3V.
2. Insert the 3.4 mm outer diameter/1.3 mm inner diam-
eter barrel plug into the AC adapter’s socket. Line up
TIP on the plug with –NEG on the socket.
9
14-1225.fm Page 10 Friday, July 2, 1999 9:00 AM
3. Insert the barrel plug into the SCP-84’s DC 3V jack.
4. Plug the AC adapter into a standard AC outlet.
Using Your Vehicle’s Cigarette-Lighter
Socket
To power the SCP-84 from your vehicle’s cigarette-lighter
socket, you need a DC adapter, such as Cat. No. 270-
1560.
Cautions:
• The recommended DC cigarette-lighter adapter sup-
plies 3 volts and delivers at least 300 milliamps. Its
center tip is set to negative, and its plug correctly fits
the DC 3V jack on the bottom of the SCP-84. Using
an adapter that does not meet these specifications
could damage the SCP-84 or the adapter.
• Unplug the adapter from your vehicle’s cigarette-
lighter socket when you turn off the ignition. This pre-
vents your vehicle’s battery from being drained if you
leave the SCP-84 on when you turn off the ignition.
10
14-1225.fm Page 11 Friday, July 2, 1999 9:00 AM
• Always plug the DC adapter’s barrel plug into the
SCP-84 before you plug its power module into your
vehicle’s cigarette-lighter socket, and unplug its
power module from your vehicle’s cigarette-lighter’s
socket before you unplug its barrel plug from the
SCP-84.
Follow these steps to power the SCP-84 from your vehi-
cles’s cigarette-lighter socket.
(illus)
1. Set the adapter’s voltage switch to 3V.
2. Insert the 3.4 mm outer diameter/1.3 mm inner diam-
eter barrel plug into the DC adapter’s socket. Line up
negative (–) on the plug with TIP on the socket.
3. Insert the plug into the SCP-84’s DC 3V jack.
4. Plug the adapter into the vehicle’s cigarette-lighter
socket.
11
14-1225.fm Page 12 Friday, July 2, 1999 9:00 AM
Note: If the SCP-84 does not operate when you turn it
on, remove the DC adapter from your vehicle’s cigarette-
lighter socket and check the socket for debris. Also,
check the fuse in the adapter and your vehicle’s fuse
block.
SETTING THE CLOCK
1. Set RADIO STEREO/MONO/TAPE to TAPE. The dis-
play shows the currently set time.
(illus)
2. Press MODE twice. The currently set time flashes.
(illus)
12
14-1225.fm Page 13 Friday, July 2, 1999 9:00 AM
HR. or
MIN. within 10
Note: If you do not press
seconds, the currently set time stops flashing. If this
happens, simply repeat this step.
3. Repeatedly press
HR. until the display shows the
correct hour. To rapidly advance the hours, press and
hold down HR.
(illus)
4. Repeatedly press
MIN. until the display shows the
correct minute. To rapidly advance the minutes,
press and hold down
MIN.
(illus)
5. When the display shows the correct time, either
press MODE or wait until the display stops flashing.
13
14-1225.fm Page 14 Friday, July 2, 1999 9:00 AM
SETTING THE 9KHZ/10KHZ SWITCH
9kHz/10kHz
partment door is preset to
The
switch on the back of the cassette com-
10kHz
.
(illus)
10kHz
In the
setting, the SCP-84 tunes frequencies in in-
crements of 10 kHz (AM) and 0.1 MHz (FM), which is
standard in the United States.
However, in Europe and some other parts of the world,
AM frequencies are broadcast in increments of 9 KHz. If
you use the SCP-84 in these countries, use a pointed ob-
9kHz/10kHz
ject, such as a straightened paper clip, to set
9kHz
to
.
(illus)
14
14-1225.fm Page 15 Friday, July 2, 1999 9:00 AM
CONNECTING HEADPHONES OR
AMPLIFIED SPEAKERS
To listen to the SCP-84, you need a pair of headphones
1
or amplified speakers with a /8-inch plug. Your local Ra-
dioShack store carries a wide selection of headphones
and amplified speakers.
1
Insert the headphones’ or speakers’ /8-inch plug into the
PHONES
SCP-84’s
jack.
(illus)
15
14-1225.fm Page 16 Friday, July 2, 1999 9:00 AM
Listening Safely
To protect your hearing, follow these guidelines when
you use headphones.
• Set the volume to the lowest setting before you begin
listening. After you begin listening, adjust the volume
to a comfortable level.
• Do not listen at extremely high volume levels.
Extended high-volume listening can lead to perma-
nent hearing loss.
• Once you set the volume, do not increase it. Over
time, your ears adapt to the volume level, so a vol-
ume level that does not cause discomfort might still
damage your hearing.
Traffic Safety
Do not wear headphones while operating a motor vehicle
or riding a bicycle. This can create a traffic hazard and
can be illegal in some areas.
Even though some headphones let you hear some out-
side sounds when listening at normal volume levels, they
still can present a traffic hazard.
16
14-1225.fm Page 17 Friday, July 2, 1999 9:00 AM
USING THE RADIO
LISTENING TO THE RADIO
Make sure you have connected headphones
Important:
or speakers to the SCP-84. See “Connecting Head-
phones or Amplified Speakers” on Page 15.
1. Set RADIO STEREO/MONO/TAPE to STEREO for ste-
reo sound on FM stations. STEREO appears when
you receive an FM broadcast in stereo. Set RADIO
STEREO/MONO/TAPE to MONO for monaural recep-
tion.
(illus)
2. Adjust VOLUME to a comfortable listening level.
(illus)
17
14-1225.fm Page 18 Friday, July 2, 1999 9:00 AM
3. Press AM/FM until the display shows the desired
band (AM or FM).
(illus)
4. Tune to the desired station.
Repeatedly press TUNING or to
Manual Tuning:
tune up or down the selected band. To rapidly tune
the band, press and hold down TUNING or
.
(illus)
Press and hold down TUNING
or
Seek Tuning:
for about 1 second. The SCP-84 tunes up or down
the selected band, then stops at the next higher or
lower station with a strong signal.
18
14-1225.fm Page 19 Friday, July 2, 1999 9:00 AM
Notes:
• The SCP-84 has a built-in AM antenna, and the
headphones’ or speakers’ cord serves as an FM
antenna. For the best AM reception, rotate the
SCP-84. For the best FM reception, fully uncoil the
headphones’ or speakers’ cord.
• If FM stereo reception is poor or noisy, set RADIO
STEREO/MONO/TAPE to MONO. The sound is not in
stereo, but reception should improve.
5. Set E-BASS IN/OUT to IN for extra bass effect, or to
OUT to leave the bass sound unchanged.
(illus)
6. To turn off the radio, set RADIO STEREO/MONO/TAPE
to TAPE.
19
14-1225.fm Page 20 Friday, July 2, 1999 9:00 AM
STORING RADIO STATIONS IN
MEMORY
You can store up to 20 radio stations (10 FM and 10 AM)
in memory. Then you can quickly tune to the stored sta-
+5
tion by pressing a memory button (or
button).
and a memory
Follow these steps to store stations in memory.
RADIO STEREO/MONO/TAPE
STEREO
or
1. Set
to
MONO
.
AM/FM
2. Press
until the display shows the desired AM
or FM band.
3. Tune to the first station you want to store. The display
shows the frequency.
STORE
4. Press
. M flashes on the display for about 10
seconds.
(illus)
20
14-1225.fm Page 21 Friday, July 2, 1999 9:00 AM
Note: If you do not press a memory location button
or +5 within about 10 seconds, M disappears from the
display. Start again from Step 4.
5. To store stations into memory locations 1-5, while M
flashes on the display, press a memory location but-
ton (1-5) to store the current frequency in that mem-
ory location. M stops flashing and the display shows
the frequency, then M disappears.
(illus)
To store stations into memory locations 6-10, press
+5, then one of the memory location buttons (1-5).
This increases the memory location number by 5. For
example, if you press +5, then press memory location
button 1, the stereo stores the selected frequency
into memory location 6.
(illus)
21
14-1225.fm Page 22 Friday, July 2, 1999 9:00 AM
6. Tune to the next station you want to store, then
repeat Steps 4 and 5.
To replace a station you stored, simply store a new sta-
tion in that memory location.
USING LOCK
You can lock the radio to prevent either accidentally
changing the station you are listening to or replacing a
stored station.
STOP
To lock or unlock the radio, press and hold down
while listening to a radio station, then press MODE.
LOCK appears if the radio is locked, and disappears if the
radio is unlocked.
Note: When you lock the radio, none of the buttons on
VOLUME RA-
the front panel work. But, you can still set
,
DIO STEREO/MONO/TAPE
E-BASS
.
, and
22
14-1225.fm Page 23 Friday, July 2, 1999 9:00 AM
USING THE CASSETTE PLAYER
PLAYING A CASSETTE TAPE
Make sure that you have connected headphones or
speakers to the SCP-84. See “Connecting Headphones
or Amplified Speakers” on Page 15.
We do not recommend using C-120 cassette
Caution:
tapes. They are very thin and can easily become tangled
in the tape-handling parts.
1. Set RADIO STEREO/MONO/TAPE to TAPE.
(illus)
2. Take up any slack in the cassette tape by turning its
hub with your finger or a pencil. If you do not remove
excess slack, the tape might become tangled in the
play mechanism. Avoid touching the tape.
(illus)
23
14-1225.fm Page 24 Friday, July 2, 1999 9:00 AM
3. Pull open the cassette compartment door.
(illus)
4. Slide the cassette tape into the guides in the cassette
compartment door with the tape’s open edge facing
out, the side you want to hear facing up, and the full
reel on the left. Then close the door.
(illus)
5. Press PLAY
to play the tape.
(illus)
24
14-1225.fm Page 25 Friday, July 2, 1999 9:00 AM
Notes:
• After playing to the end of each side, the tape
changes direction to play the other side.
• To manually change the tape’s direction to play the
other side, slide
position.
DIRECTION
to the opposite
(illus)
• To fast-forward or rewind the cassette tape, press
or . When you reach the desired section
of tape, press STOP then PLAY
to resume
play.
(illus)
6. Adjust VOLUME to a comfortable listening level.
25
14-1225.fm Page 26 Friday, July 2, 1999 9:00 AM
7. Set E-BASS IN/OUT to IN for extra bass effect, or to
OUT to leave the bass sound unchanged.
(illus)
8. Press STOP to stop the tape.
26
14-1225.fm Page 27 Friday, July 2, 1999 9:00 AM
USING THE ALARM
You can set the SCP-84 to automatically sound a beep-
ing alarm at a time you select.
SETTING THE ALARM TIME
1. Set RADIO STEREO/MONO/TAPE to TAPE. The dis-
play shows the currently set time.
2. Press MODE once. AL appears, and the currently set
alarm time flashes.
If you do not press
HR. or
MIN. within 10
Note:
seconds, AL disappears from the display and the
currently set alarm time stops flashing. If this hap-
pens, simply repeat this step.
3. Repeatedly press
correct hour.
HR. until the display shows the
(illus)
27
14-1225.fm Page 28 Friday, July 2, 1999 9:00 AM
4. Repeatedly press
correct minute.
MIN. until the display shows the
(illus)
5. When the display shows the correct alarm time,
press MODE twice or wait until the display stops
flashing. AL and the set alarm time disappear and
the currently set time appears.
TURNING THE ALARM ON/OFF
To turn on the alarm, press ALARM ON/OFF once. AL ap-
pears on the display. At the preset alarm time, the alarm
beeps for about 10 minutes or until you press ALARM
STOP. The alarm will beep again the next day at the set
time.
(illus)
To turn off the alarm so it will not sound again the next
day, press ALARM ON/OFF once so AL disappears from
the display.
28
14-1225.fm Page 29 Friday, July 2, 1999 9:00 AM
CARE AND MAINTENANCE
Your Optimus SCP-84 Auto Reverse AM/FM Stereo Cas-
sette Player is an example of superior design and crafts-
manship. The following suggestions will help you care for
the SCP-84 so you can enjoy it for years.
Keep the SCP-84 dry. If it gets wet, wipe it
dry immediately. Liquids can contain miner-
als that corrode electronic circuits.
Handle the SCP-84 gently and carefully.
Dropping it can damage circuit boards and
cases, and can cause it to work improperly.
Keep the SCP-84 away from dust and dirt,
which can cause premature wear of parts.
Wipe the SCP-84 with a damp cloth occa-
CLEANER
sionally to keep it looking new. Do not use
harsh chemicals, cleaning solvents, or
strong detergents to clean it.
Use and store the SCP-84 only in normal
temperature environments. Temperature
extremes can shorten the life of electronic
devices, damage batteries, and distort or
melt plastic parts.
29
14-1225.fm Page 30 Friday, July 2, 1999 9:00 AM
Modifying or tampering with the SCP-84’s internal com-
ponents can cause a malfunction and might invalidate its
warranty and void your FCC authorization to operate it. If
your SCP-84 is not performing as it should, take it to your
local RadioShack store for assistance.
THE FCC WANTS YOU TO KNOW
This equipment complies with the limits for a Class B dig-
ital device as specified in Part 15 of FCC Rules. These
limits provide reasonable protection against radio and TV
interference in a residential area. However, your equip-
ment might cause TV or radio interference even when it
is operating properly.
To eliminate interference, you can try one or more of the
following corrective measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and
the radio or TV.
• Use outlets on different electrical circuits for the
equipment and the radio or TV.
Consult your local RadioShack store if the problem still
exists.
30
14-1225.fm Page 31 Friday, July 2, 1999 9:00 AM
CLEANING THE TAPE-HANDLING
PARTS
Dirt, dust, or particles of the tape’s coating can accumu-
late on the tape heads and other parts that the tape
touches. This can greatly reduce the performance of the
SCP-84. Use the following cleaning procedure after ev-
ery 20 hours of operation.
1. Remove the batteries and disconnect any other
power source.
2. Open the cassette compartment door.
PLAY
3. Press
to expose the tape-handling parts.
4. Use a cotton swab dipped in denatured alcohol or
tape head cleaning solution to clean the play head,
pinch roller, capstan, and tape guides.
(illus)
STOP
5. When you finish cleaning, press
and close the
cassette compartment door. Then reconnect power.
Your local RadioShack store carries a full line of cassette
player cleaning supplies.
31
14-1225.fm Page 32 Friday, July 2, 1999 9:00 AM
RESTORING TAPE TENSION AND
SOUND QUALITY
After you play a cassette several times, the tape might
become tightly wound on the reels. This can cause play-
back sound quality to deteriorate.
To restore the sound quality, fast-forward the tape from
the beginning to the end of one side, then completely re-
wind it. Then loosen the tape reels by gently tapping each
side of the cassette’s outer shell on a flat surface.
Caution: Be careful not to damage the cassette when
tapping it. Do not touch the exposed tape or allow any
sharp objects near the cassette.
32
14-1225.fm Page 33 Friday, July 2, 1999 9:00 AM
SPECIFICATIONS
RADIO
FM
AM
Frequency Range
IF Rejection
88–108 MHz 530–1710 kHz
49 dB
15 dB
15 dB
50 dB
25 dB
25 mV
50 dB
50 dB
Image Rejection
Selectivity
22 dB
Signal-to-Noise Ratio
Stereo Separation
Usable Sensitivity
29 dB
N/A
1700 mV/m
CASSETTE PLAYER
Cassette Mechanism ................................. Auto–Reverse
Wow and Flutter........................................................0.3%
Signal-to-Noise Ratio...............................................51 dB
Separation ...............................................................27 dB
Frequency Response (–3 dB)........................70–5000 Hz
33
14-1225.fm Page 34 Friday, July 2, 1999 9:00 AM
GENERAL
Power Requirements ............................................. DC 3V
Power Sources.............. 2 AA Batteries (Cat. No. 23-557)
AC Adapter (Cat. No. 273-1654)
DC Adapter (Cat. No. 270-1560)
Phone Output Impedance .....................................32 ohm
Dimensions (HWD) ...................... 415/16 ¥ 39/16 ¥ 17/16 in
(125 ¥ 90 ¥ 36 mm)
Weight..................................................................... 9.0 oz
(255 gm)
Specifications are typical; individual units might vary.
Specifications are subject to change and improvement
without notice.
34
14-1225.fm Page 35 Friday, July 2, 1999 9:00 AM
NOTES
35
14-1225.fm Page 36 Friday, July 2, 1999 9:00 AM
RadioShack Limited Warranty
This product is warranted against defects for 90 days from date of pur-
chase from RadioShack company-owned stores and authorized
RadioShack franchisees and dealers. Within this period, we will repair
it without charge for parts and labor. Simply bring your RadioShack
sales slip as proof of purchase date to any RadioShack store. War-
ranty does not cover transportation costs. Nor does it cover a product
subjected to misuse or accidental damage.
EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO
EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES ARE
LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIM-
ITED WARRANTIES CONTAINED HEREIN. Some states do not per-
mit limitation or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
We Service What We Sell
10/95
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
6A6
Printed in Hong Kong
|