E330_QSG_EN.fm Page 1 Wednesday, December 28, 2005 11:53 AM
VH487701
UNPACK THE BOX CONTENTS
CHARGING THE LITHIUM ION BATTERY
S
T
E
P
S
T
E
P
Provided contents may differ depending on the camera kit.
Charge the Lithium ion battery using the provided charger. The
Lithium ion battery is not fully charged when purchased. Before
use, be sure to charge the Lithium ion battery.
Make sure you have all the items shown in the provided contents
list (printed separately).
REVIEW THE DOCUMENTATION
Quick Start Guide (this document)
Getting started with your digital camera.
Charging indicator
Red light: Charging in
progress
Lithium ion battery
(BLM-1)
It is strongly recommended that you follow
these step-by-step instructions to set up and
quickly begin using your new Digital
Camera.
Green light: Charging
completed
(Charging time: Approx.
5 hours)
Remove the protection
cap from the battery.
Quick Reference Guide (reverse side of this document)
Quick guide to using common features and functions.
3
AC cable
Advanced Manual
Detailed instructions on all camera features and functions.
1
Lithium ion charger
(BCM-2)
2
Software Installation Guide (separate document on OLYMPUS
Master CD-ROM)
Detailed instructions on installing the OLYMPUS Master software.
AC wall outlet
Align the battery
with the arrow
System chart
LOADING THE BATTERY
ATTACH THE STRAP
INSERT THE MEMORY CARD
S
T
E
P
S
T
E
P
S
T
E
P
a. Push the battery compartment lock
Battery compartment
lock
This camera can use a Compact Flash, Microdrive or xD-Picture Card. These
cards are optional.
Strap eyelet
slightly towards
and open the
a. Thread one end of the strap through the strap
eyelet on the camera.
battery compartment cover.
a. Insert the card with the contact area facing in the direction shown in the
illustration.
Battery
compartment
cover
Ring
b. Thread the end of the strap through the ring,
then thread it through the stopper as indicated
by the arrows.
b.Close the card cover.
b.Load and push the battery in until it is
locked by the battery lock.
Battery lock
c. Thread the strap back through the other hole
of the stopper.
d. Pull the other side of the strap tight, making
sure that it is fastened securely.
WMark
Unloading the battery
e. Repeat steps (a) - (d) to attach the other end of
the strap to the other eyelet.
Stopper
Press the battery lock to unlock and
remove the battery.
CF card slot
xD-Picture
Card slot
Direction
indicating mark
ATTACH A LENS
TURN ON THE CAMERA
SET THE DATE AND TIME
S
S
S
T
E
P
T
E
P
T
E
P
2
1
Rear cap
a. Remove the body cap from the
camera and the rear cap from the
lens.
a. Set the power switch to
ON. To turn off the power,
set the power switch to
OFF.
b.Set the mode dial to P.
a. With the camera on, press the MENU button.
b. Use ac to select tab, then press d. Use ac to select X, then
press d.
2
c. Use ac to select the date format, then press d.
d. Use ac to set each item and press d to move to the next item.
e. Press the ibutton when you have finished entering the date and time.
1
Body cap
Lens attachment
mark (Red)
Alignment
mark (Red)
c. While looking though
the viewfinder, rotate
the diopter adjustment
dial little by little.
b. Align the lens attachment mark (red)
on the camera with the alignment
mark (red) on the lens, then insert the
lens into the camera’s body. Rotate
the lens clockwise until you hear it
click.
2
When you can see the
AF frame clearly,
adjustment is complete.
1
AF frame
MENU button
c. Remove the lens cap.
Lens cap
TAKING A PICTURE
REVIEWING AND ERASING
A PICTURE
CONNECTING THE CAMERA TO A
COMPUTER
S
S
S
T
E
P
T
E
P
T
E
P
a. Press the q (playback) button. The last
q button
a. Place the AF frame on the subject while
viewing through the viewfinder.
a. Make sure the camera is off.
b. Connect the camera to the computer using the USB cable (included). Set
the camera’s power switch to ON.
picture taken is displayed.
b.Use the arrow pad to select images you
want to view.
b.Press and hold the shutter button halfway
to lock the focus and exposure, then press
the shutter button completely to take the
picture.
c. To return to the shooting mode, press
the shutter button halfway.
Shutter button
AF frame
S button
Arrow pad
ERASING A PICTURE
c. Use ac to select [STORAGE]. Press the
a. Select the picture you want to erase and
i button.
press the S button.
b.Use ac to select [YES], then press the i
button.
VERIFY CAMERA CONNECTION
ABOUT THE CD-ROM DISK
INSTALLING THE CAMERA
SOFTWARE
S
T
E
P
S
T
E
P
S
T
E
P
WINDOWS:
a. Insert the OLYMPUS Master CD-ROM
into your computer’s CD-ROM drive.
a. From the desktop (“Start” menu for XP), open
“My Computer”.
Now that you’ve mastered the basic functionality of your new
Olympus Digital Camera, you are ready to begin exploring the
possibilities that digital photography brings to your computer.
Activities such as photo editing, printing and much more are only steps
away!
b.For Windows:
Click the “OLYMPUS Master” button
in the “Setup” window.
b. Verify that the “Removable Disk” icon
representing the camera is displayed.
For Macintosh:
Double-click the “Installer” icon.
OLYMPUS Master software: Download pictures from the camera, view,
organize, retouch, e-mail and print your digital photos and movies and
more! This CD also contains the complete software users manual in
Adobe Acrobat (PDF) format.
MACINTOSH:
c. Follow the on-screen instructions. For
more details, click “Please Read First”.
a. Verify that the “NO_NAME” icon representing the
camera is displayed.
Please refer to the Quick Reference Guide on the reverse side of this sheet to
familiarize yourself with the commonly used features and functions of your
new Olympus Digital Camera.
• The above steps confirm that the camera has been installed correctly. You
can transfer your images immediately using the standard drag and drop
procedure, or enhance your experience using OLYMPUS Master software
(included).
Printed in China
|