User Guide for the Nokia
Wireless Audio Adapter
AD-5B
9310725
Issue 1
Download from Www.Somanuals.com. All Manuals Search And Download
C o n t e n t s
Contents
1. Introduction ....................................................................... 4
2. Getting started................................................................... 6
Overview........................................................................................................... 6
Using the adapter for the first time......................................................... 7
Pairing the device...................................................................................... 8
Pairing multiple headsets ....................................................................... 9
Resetting headsets..................................................................................... 10
Switching the Nokia wireless audio adapter off............................... 10
Modes of the light indicator ................................................................... 10
Transferring audio signals........................................................................ 12
Accidental disconnection of the wireless audio adapter................ 13
Optimising the adapter use ..................................................................... 13
Care and maintenance ......................................................... 15
3
Download from Www.Somanuals.com. All Manuals Search And Download
I n t r o d u c t i o n
1. Introduction
The Nokia Wireless Audio Adapter AD-5B enables the use of
headsets with Bluetooth technology with Nokia phones that
have a Pop-Port™ connector but do not offer integrated
Bluetooth functionality. This gives you more freedom for
making and receiving calls while on the move or at the office.
Read this user’s guide carefully before using the Nokia Wireless
Audio Adapter AD-5B. Not following the user’s guide may be
dangerous or illegal. More detailed information, including
important safety and maintenance information, is provided in
the user guides for your phone and your headset.
Note: There may be restrictions on using devices
with Bluetooth wireless technology in some
locations. Check with your local authoritites or
service provider.
Features using Bluetooth wireless technology, or allowing them
to run in the background while using other features, increases
the demand on battery power and reduces the battery life.
All wireless devices may be susceptible to interference, which
could affect performance.
The Nokia Wireless Audio Adapter operates with compatible
Nokia headsets (and other compatible headset products), but
not with other types of products with Bluetooth technology.
4
Download from Www.Somanuals.com. All Manuals Search And Download
I n t r o d u c t i o n
The Nokia Wireless Audio Adapter sales package includes the
adapter and the user’s guide. Note that the Bluetooth passkey,
which you need when using the adapter with the headset, is in
the card provided in the headset’s sales package. Keep the
passkey in a secure place.
5
Download from Www.Somanuals.com. All Manuals Search And Download
G e t t i n g s t a r t e d
2. Getting started
■ Overview
The Nokia Wireless Audio Adapter contains the following parts:
1 - Control key: Switches
the adapter on and off. The
control key also changes
modes in the adapter.
2 - Indicator light:
Displays the current status
of the adapter. See ”Modes
of the light indicator” on
page 10.
Note that you should avoid covering the adapter in order to
optimise the Bluetooth connection.
Note that since the Wireless Audio Adapter is an enhancement
to Nokia phone models that do not support Bluetooth wireless
technology, there are no menus or user interfaces in the phone
itself.
6
Download from Www.Somanuals.com. All Manuals Search And Download
G e t t i n g s t a r t e d
■ Using the adapter for the first time
Before you can use the Wireless Audio Adapter, you need to
associate, "pair", it with the headset you want to use. The
compatible headset must support Bluetooth Specification 1.1.
For pairing you need the adapter, a compatible phone, and the
headset including its PIN code. You only need to pair each
individual headset once.
Attach the Nokia Wireless Audio Adapter into the Pop-Port
connector of your phone. Note that your phone should be in
standby mode, ready to use, and it should not have any
characters keyed in. The adapter blinks once briefly in green to
indicate that the power is on. If the adapter has not been
paired with any headsets, the state is indicated with a slow,
continuous red blink.
Note that if you have the
keylock of your phone on,
the keylock is automatically
deactivated after you have
attached the adapter into
the phone. Note also that if
you have the Silent profile
on in your phone, the
automatic answering does
not work. Also Lights off mode in your phone should be
activated, because having the lights continuously on reduces
the battery life.
7
Download from Www.Somanuals.com. All Manuals Search And Download
G e t t i n g s t a r t e d
Pairing the device
Switch on the headset power before you start to pair your
headset with the Nokia Wireless Audio Adapter. Make sure no
other headsets or other compatible audio devices are active
within a 10 metre range.
1. Check the headset user guide to familiarise yourself with
how to pair your headset .
2. Attach the adapter to the Pop Port connector of your
phone. Wait for the slow red blink. Select the PIN entry
mode by pressing the Control key once in the Wireless
Audio Adapter to make the adapter find the compatible
headset.
If there are no headsets with compatible Bluetooth
wireless technology within a 10 metre range, the light
indicator blinks red to indicate an error situation. The
adapter then goes into Init mode and blinks slowly a red
light. See ”Modes of the light indicator” on page 10.
3. If a compatible headset is found, the light indicator of the
adapter is continuously green for 20 seconds. Key in your
four-digit Bluetooth passkey on the phone to pair the
headset in this time period. The digits appear on the phone
display. End your passkey entry by pressing
.
The Bluetooth passkey is marked on the card that is
provided in the sales package of the headset.
If the pairing is successful, the phone display is cleared. The
light indicator on the Nokia Wireless Audio Adapter is
turned off and
appears on the phone display.
8
Download from Www.Somanuals.com. All Manuals Search And Download
G e t t i n g s t a r t e d
The headset whose passkey you enter first becomes the
default device for the Wireless Audio Adapter.
The Wireless Audio Adapter and the headset are now ready
to be used.
Note that all audios, including the call alert tones, are now
routed to the headset.
4. If the pairing is unsuccessful, either press the Control key
once briefly or detach the adapter from your phone and
start the pairing procedure again from step one above.
Pairing multiple headsets
To pair another headset to the adapter, repeat the procedure
above. However, make sure that the headset that has already
been paired is turned off, and that only the new unpaired
headset is within a 10 metre range of the adapter. Note that
the adapter can be simultaneously paired with two headsets
only.
When using the headsets, the adapter first tries to find the
default user, which is the first paired headset, and then the
secondary headset. If you want to pair more headsets, the new
headset replaces the secondary user. You can replace the
secondary user as many times as you want. If you want to
replace the default user, you need to reset the adapter. Note
that since the reset clears the memory of the adapter, the
secondary user is reset as well.
9
Download from Www.Somanuals.com. All Manuals Search And Download
G e t t i n g s t a r t e d
■ Resetting headsets
Reset clears all pairing and user data information. To reset the
adapter, press and hold the Control key for 10 seconds. The
reset is confirmed with an alternating red and green blink for
another 10 seconds.
Your headset may accept only a limited number of pairings and
may need to be reset to make the pairings. For resetting your
headset, refer to the user guide for the headset.
■ Switching the Nokia wireless audio
adapter off
You can also switch the adapter off, if for instance the adapter
will not be used for a while. If you want to switch the adapter
off, press the Control key for 2 seconds. The adapter blinks
once red and
disappears from the phone display. When the
adapter is turned off, the phone operates as if there was no
adapter attached to it. To switch the adapter back on, press the
Control key once.
■ Modes of the light indicator
The light indicator has the following modes:
•
Slow red blink (on for 0.2 seconds, off for 5 seconds)
The adapter is in the Init mode. This means that the
adapter is attached to a phone. The adapter stays in the
Init mode permanently until you press the Control key to
search for a new headset or switch off the adapter.
10
Download from Www.Somanuals.com. All Manuals Search And Download
G e t t i n g s t a r t e d
•
Fast green blink (on for 0.2 seconds, off for 0.8 seconds)
The adapter is either
in Inquiry mode, which means that the adapter is
searching for a headset with Bluetooth technology. If a
headset is found, the adapter switches itself to Pairing
mode. If a headset is not found, the adapter returns to Init
mode.
or in Page mode, which means that it is searching for
paired headsets.
•
Continuous green (on for 20 seconds)
The adapter is in Pairing mode. This means that you have
20 seconds to start keying in the Bluetooth passkey on your
phone. If the pairing is successful, the adapter switches to
Idle mode. If the pairing fails, the adapter returns to Init
mode.
•
•
Green blink (on for 0.2 seconds, off for 2 seconds)
The adapter is in Idle mode. The icon
is shown on the
phone display. The phone and the headset with Bluetooth
technology are ready to be used.
Slow green blink (on for 0.2 seconds, off for 5 seconds)
The adapter is in the Audio linked mode, which means that
there is a call in progress and the audio has been linked to
the headset.
11
Download from Www.Somanuals.com. All Manuals Search And Download
G e t t i n g s t a r t e d
•
Alternating red and green blink for 10 seconds (on for 0.5
seconds, off for 0.8 seconds)
The adapter is in the Reset mode. When the reset has been
successful, the light indicator blinks red.
•
No indication from the light indicator
The adapter is in Power saving mode, which means that it
is switched off. When the adapter is switched off, the light
indicator blinks once in red for confirmation. In this mode
the icon
disappears from the phone display and the
calls are routed to the phone normally. To return to Init
mode, press Control key once.
■ Transferring audio signals
If you press Control key once briefly during a call in Audio
Linked mode, the audios are transferred to the phone and the
call is continued normally. If you want to transfer the audios
back to the headset, press Control key of the adapter or
Headset key.
If your phone is in Idle mode, you can transfer the audios from
the headset to the phone by pressing Control key once briefly.
To transfer the audios back to the headset, press Control key of
the adapter or Headset key.
Note that when the audios have been transferred to the
headset, all audios including the call alert tones are routed to
the headset.
12
Download from Www.Somanuals.com. All Manuals Search And Download
G e t t i n g s t a r t e d
■ Accidental disconnection of the
wireless audio adapter
If, during a call, the adapter is accidentally disconnected from
the Pop-Port connector or the headset battery runs flat, the
call is transferred to the phone and is continued normally. The
pairing information stays stored in the permanent memory of
the adapter.
If the 10 metre range between the adapter and the headset is
exceeded, or for some other reason the radio connection
between the headset and the adapter is lost, the adapter and
the headset try to restore the lost connection for a short while.
If the connection cannot be re-established, the call is
transferred to the phone and continued normally, and the
wireless audio adapter returns to Idle.
■ Optimising the adapter use
The following will help you to use your adapter in an optimal
way:
•
You should set the phone’s back light settings in
Automatic mode to prevent unnecessary battery
consumption. In most Nokia phones, select Automatic at
the phone menu under Settings =>Accessory settings=>
Handsfree =>Lights. Then select Automatic.
•
The phone’s internal vibrator works only when the adapter
is in Power saving mode.
13
Download from Www.Somanuals.com. All Manuals Search And Download
G e t t i n g s t a r t e d
•
•
You should not use the Silent profile in your phone,
because then you are not able to hear the ringing tone and
you might not notice the call. The Automatic answer does
not work when the Silent profile is active.
If you have switched your phone off and you have the
adapter attached to it, the adapter switches to Init mode
when you connect the charger to the phone.
14
Download from Www.Somanuals.com. All Manuals Search And Download
C a r e a n d m a i n t e n a n c e
Care and maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you to fulfil any warranty obligations and to enjoy this
product for many years.
•
•
Keep all accessories out of the reach of small children.
Keep the device dry. Precipitation, humidity and all types of
liquids or moisture can contain minerals that will corrode
electronic circuits.
•
•
Do not use or store the device in dusty, dirty areas. Its
moving parts can be damaged.
Do not store the device in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries,
and warp or melt certain plastics.
•
Do not store the device in cold areas. When it warms up (to
its normal temperature), moisture can form inside, which
may damage electronic circuit boards.
•
•
•
•
Do not attempt to open the device. Non-expert handling
may damage it.
Do not drop, knock or shake the device. Rough handling
can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
If the device is not working properly, take it to your nearest
qualified service facility. The personnel there will assist you
and, if necessary, arrange for service.
15
Download from Www.Somanuals.com. All Manuals Search And Download
16
Download from Www.Somanuals.com. All Manuals Search And Download
|