Nokia Cell Phone 2160 User Manual

 
Contents  
Traffic Safety...........................................................1  
Operating Environment...........................................1  
Emergency Calls ....................................................2  
2. The Display and Connectors...........................5  
Installing a battery...................................................7  
Removing a battery ................................................7  
Switching On or Off ..............................................11  
Access Codes......................................................11  
Answering a Call...................................................13  
Making a Call........................................................13  
Speed Dialing.......................................................13  
Last Number Redial..............................................14  
1-Touch Dialing.....................................................14  
Emergency Key 9.................................................15  
Earpiece Volume...................................................15  
Calling Line Identification ......................................16  
Distinct Ringing ....................................................16  
Keyguard .............................................................16  
Voice Messages ...................................................18  
Alpha Mode .........................................................21  
Entering Names....................................................22  
Storing Numbers and Names ...............................22  
Recalling Stored Numbers....................................24  
Recalling Stored Names .......................................24  
i
 
To view Dialed Numbers .......................................25  
To view Last Received Calls..................................25  
To view Missed Calls.............................................25  
Notepad...............................................................26  
Call Timers ...........................................................26  
Sending Strings of Touch Tones............................27  
Touch Tone Settings in the Phone ........................29  
Summary Of Menu Functions ...............................31  
Menu 01, Memory Functions................................32  
Menu 2, Messages...............................................32  
Menu 3, Call Settings ...........................................33  
Menu 4, Phone Settings ......................................35  
Menu 5, Security Options ....................................37  
Menu 6, Network Services ...................................39  
Menu 7, System Select ........................................43  
Menu 8, NAM Selection........................................44  
Menu 9, Number Editor .......................................45  
Menu 10, Alert Options.........................................45  
Menu 11, Activate Keyguard ................................46  
11. Data and Fax Calls ......................................47  
Approximate battery operation times ....................50  
Approximate charging times ................................50  
Standard Travel Charger (ACH-3U) .......................51  
Rapid Travel Charger (ACH-4U) ...........................51  
Rapid Cigarette Lighter Charger (LCH-2) ..............51  
Compact Desktop Charging Stand (CHH-2) .........52  
Compact Desktop Charger Kit (CHH-2K)..............53  
Handsfree Desktop Charger (CHH-8)....................53  
Handsfree Desktop Charger Kit (CHH-8K) ............53  
Mobile Holder (MBH-6).........................................53  
Compact Handsfree Car Kit (CARK-10) ................54  
Complete Car Installation Kit (CARK-11) ...............54  
Booster Kit (BSHK-4)............................................55  
External Audio Handset (HSU-1)...........................55  
Belt Clip (BCH-2) ..................................................56  
13. Care and Maintenance ...............................57  
ii  
 
1. Important Safety Information  
Traffic Safety  
Do not use a hand-held telephone while driving a  
vehicle. If using a hand-held telephone park the vehicle  
before conversing.  
Always secure the phone in its holder; do not place the  
phone on the passenger seat or where it can break  
loose in a collision or sudden stop.  
The use of an alert device to operate a vehicle’s lights  
or horn on public roads is not permitted.  
Remember road safety always comes first!  
Operating Environment  
Remember to follow any special regulations in force in  
any area and always switch off your phone whenever it  
is forbidden to use it, or when it may cause interference  
or danger.  
Operation of any radio transmitting equipment,  
including cellular telephones, may interfere with the  
functionality of inadequately protected medical devices.  
Consult a physician or the manufacturer of the medical  
device if you have any questions. Other electronic  
equipment may also be subject to interference.  
As with other mobile radio transmitting equipment,  
users are advised that for the satisfactory operation of  
the equipment and for the safety of personnel, it is  
recommended that the equipment should only be used  
in the normal operating position.  
Users are advised to switch off the phone when at a  
refueling point (service station). Users are reminded of  
the need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and distribution  
areas), chemical plants or where blasting operations are  
in progress.  
Do not store or carry flammable liquids, gases or  
explosive materials in the same compartments as the  
phone, its parts or accessories.  
1
 
 
Only qualified personnel should install or service the  
phone in a vehicle. Faulty installation or service may be  
dangerous and may invalidate the warranty.  
Electronic fuel injection systems, electronic anti-skid  
braking systems, electronic cruise control systems and  
other electronic systems can malfunction due to the  
lack of protection from radio signals.  
Check regularly that all cellular phone equipment in a  
vehicle is mounted and operating properly.  
Switch off your cellular phone when in an aircraft. The  
use of cellular telephones in an aircraft may be  
dangerous to the operation of the aircraft, disrupt the  
cellular network, and is illegal.  
Failure to observe these instructions may lead to  
suspension or denial of cellular telephone services to  
the offender, or legal action or both.  
Emergency Calls  
IMPORTANT!  
This phone, like any cellular telephone, operates using  
radio signals, cellular and landline networks, and  
user-programmed functions which cannot guarantee  
connection in all conditions. Therefore you should never  
rely solely upon any cellular phone for essential  
communications (e.g. medical emergencies).  
Remember, to make or receive any calls this phone  
must be switched on and in a service area with  
adequate cellular signal strength. Emergency calls may  
not be possible on all cellular networks or when certain  
network services and/or phone features are in use.  
Check with local service providers.  
When making an emergency call, remember to give all  
the necessary information as accurately as possible.  
Remember that your cellular phone may be the only  
means of communication at the scene of an accident -  
do not cut off the call until given permission to do so.  
2
 
If certain features are in use (Keyguard, Locking, Call  
Restricting, etc.), you may first need to turn those  
features off before you can make an emergency call.  
Consult this document and your local cellular service  
provider.  
Emergency calling  
If the phone is not  
on, switch it on  
press and hold  
to clear display  
C
key in emergency  
number for your  
present location (e.g.  
911 or other official  
emergency number)  
press  
U
Note: Emergency numbers vary by location.  
Using this Owner’s Manual  
The cellular phone described in this manual is approved  
for use in AMPS/TDMA networks. A number of features  
included in this guide are called Network Services. They  
are special services provided by cellular service  
providers.  
Before you can take advantage of any of these Network  
Services, you must subscribe to them through your  
home service provider. You can then activate these  
functions as described in this guide. The manual  
activation commands for various services are not  
presented in this guide (e.g. and # characters for  
activating or deactivating services). The phone  
nevertheless is capable of handling commands given in  
that form. For these commands please consult with  
your service provider.  
WARNING!  
Use only batteries, antennas, chargers, and  
accessories approved by the phone manufacturer. The  
use of any other types will invalidate any approval or  
warranty applying to the telephone, and may be  
dangerous.  
3
 
 
FCC/INDUSTRY CANADA NOTICE  
Your phone may cause TV or radio interference (e.g.  
when using telephone in close proximity of receiving  
equipment). The FCC/Industry Canada can require you  
to stop using your telephone if such interference cannot  
be eliminated. If you need assistance, contact your  
local dealer.  
This device complies with parts 15 and 68 of the  
FCC rules. Operation is subject to the condition  
that this device does not cause harmful  
interference.  
4
 
2. The Display and Connectors  
The Disp lay  
A or B: Network the phone uses  
A - A system only  
B - B system only  
AB - Both systems  
No indicator: Home area only  
A call is in progress (In Use indicator).  
D
The phone is using a digital channel.  
The phone is in a network other than your home  
network (roaming).  
Shown continuously: roaming in a home-type system.  
Flashing: roaming in a non-home-type system.  
ABC  
The phone is in alpha mode.  
A voice message is waiting.  
Steady: You have received a text message.  
Flashing: Text message memory is full.  
Shows a memory location, menu, submenu or option  
number.  
and bar  
Indicates the current signal strength at your location.  
The higher the bar, the better the signal.  
and bar  
Indicates how much charge is left in the battery. The  
higher the bar, the more charge in the battery.  
Indicates that there is a list of options to select from.  
Also indicates the currently selected option.  
5
 
Connectors  
➌ ➍  
For Fast Cigarette Lighter Charger, Fast Travel  
Charger, and Standard Travel Charger  
Ê
Ë
Ì
Í
Power connector for Desktop Charger  
CHH-2/CHH-2L  
System and data connector for accessories,  
desktop chargers, and HF car kit  
For external antenna  
6
 
3. The Battery  
Your phone is powered by a rechargeable battery. Use  
only batteries approved by the phone manufacturer and  
recharge your battery only with the chargers approved  
by the manufacturer.  
A new battery’s full  
performance is achieved only  
after two or three complete  
charge and discharge cycles!  
Note: This chapter gives only the basics for battery  
usage. See “Accessories” for more information on  
chargers and other accessories.  
NICKEL CADMIUM AND NICKEL  
METAL HYDRIDE BATTERIES MUST  
BE RECYCLED OR DISPOSED OF  
PROPERLY. MUST NOT BE DISPOSED  
OF IN MUNICIPAL WASTE.  
NiCd  
NiMH  
Installing a battery  
2.  
Insert the battery onto  
the back of the  
phone.  
Ê
1.  
Fasten it to the phone  
by sliding slightly up-  
ward until the locking  
catch clicks.  
Ë
Removing a battery  
1.  
Switch off the phone.  
2.  
Press and hold the  
locking catch.  
Ê
3.  
Slide the battery down.  
Ë
Ì
Lift the battery away from the phone.  
7
 
 
Charging a battery with  
Fast Travel Charger  
(ACH-4U)  
Connect the lead  
from the charger to  
the bottom of the  
phone.  
Ê
Connect the charger  
Ë
to a standard 120V AC outlet.  
When the battery is charging, the battery  
indicator on the right side of the display  
scrolls. Allow the battery to completely  
charge. Charging is finished when the  
segments stop scrolling.  
The charging times depend on the type of the  
battery and the charger used.  
See the “Accessories” chapter for details.  
When charging is finished, disconnect the charger from  
the AC outlet and from the phone. When you  
disconnect the power cord of any accessory, grasp and  
pull the plug, not the cord.  
Discharging the battery  
Either leave your phone switched on until it turns itself  
off or use the battery discharge facility of any approved  
accessory available for your phone. The battery can be  
charged and discharged hundreds of times but it will  
eventually wear out. When the operating time is  
noticeably shorter than normal, it is time to buy a new  
battery.  
Battery Charge  
The phone gives you a warning tone and the message  
BATTERY LOW when only a couple of minutes of talk time  
remain. When no more battery power remains, you get  
a Recharge Battery Tone and the message RECHARGE  
BATTERY. The phone switches itself off.  
Connect your phone directly to a charger or place it on  
a charging stand with the power on or off to begin  
charging.  
8
 
 
Note: In some vehicles, the ignition must be on in order  
to charge the phone with the cigarette lighter adapter.  
If the message NOT CHARGING is displayed, charging is  
suspended. Check that the battery is not overheated  
(over 104°F/40°C), too cold, or connected to a  
non-approved charging device. Wait for a while,  
connect the charger to the phone again and retry. If  
charging still fails, contact qualified service personnel.  
Important Battery Information  
For good operation times, discharge the battery from  
time to time by leaving your phone switched on until it  
turns itself off or by using the battery discharge facility  
of any approved accessory available for your phone. Do  
not attempt to discharge the battery by any other  
means.  
When a charger is not in use, disconnect it from the  
power source. Do not leave the battery connected to a  
charger for longer than a week; overcharging may  
shorten its life.  
If left unused, a fully charged battery will discharge itself  
in about a week at room temperature.  
When the battery is not in use, store it uncharged in a  
cool, dark and dry place.  
Temperature extremes affect the ability of your battery  
to charge: it may require cooling or warming first.  
Do not short circuit the battery. Accidental short  
circuiting can occur when a metallic object (e.g. coin,  
clip, or pen) causes direct connection of the + and -  
terminals of the battery (metal strips on the back of the  
battery), for example when you carry a spare battery in  
your pocket or purse. Short circuiting the terminal may  
damage the battery or the connecting object.  
Use the battery only for its intended purpose.  
Never use any charger or battery that is damaged or  
worn out.  
9
 
Leaving the battery in hot or cold places, such as in a  
closed car in summer or winter conditions, reduces the  
capacity and lifetime of the battery. Always try to keep  
the battery between 59°F and 77°F (15°C and 25°C). A  
phone with a hot or cold battery may temporarily not  
work, even if the battery is fully charged. NiMH battery  
performance is particularly limited in temperatures  
below 14°F (-10°C).  
The battery is a sealed unit with no serviceable parts.  
Do not attempt to open the case.  
Do not dispose of a battery in a fire! Dispose of used  
batteries in accordance with local regulations. Recycle!  
10  
 
4. Basics  
Switching On or Off  
Press and hold  
a second.  
P
for  
When switching on, if your phone has an extendible  
antenna, extend the antenna fully. As with any other  
radio transmitting device, avoid unnecessary contact  
with the antenna when the phone is switched on.  
Push in the antenna when you are not using the phone.  
The phone carries out a short self-test and briefly  
displays the phone number in use.  
A Personal Reminder Note appears if you have  
programmed one with Menu 4 5. Press left F (Keep) to  
save it or right F (Erase) to delete it.  
The phone can make and receive calls only when it is  
switched on and is located in the cellular network’s  
service area.  
The phone automatically switches itself off if the  
operating temperature exceeds 158°F (70°C).  
Signal Strength  
The stronger the radio signal, the better  
the call quality. The higher the column on  
the left side of the phone display, the  
better the signal at your location.  
If the signal strength is not good, try  
moving the phone slightly. In a building,  
reception may be better near a window.  
Access Codes  
Your phone uses several access codes that can protect  
against unauthorized use of the phone.  
When requested to do so, key in the code (appears as  
asterisks) and press left F (OK). If you make a keying  
mistake, press  
time.  
C
repeatedly to erase digits one at a  
11  
 
 
Note: Avoid using access codes similar to emergency  
numbers such as 911 to prevent accidental dialing of  
the emergency number.  
Security Code (5 digits)  
Enter the 5-digit code  
then left (OK) at  
Security Code: prompt.  
F
The Security Code comes with your phone and is  
required with some phone features. Keep it secret and  
in a safe place, separate from the phone.  
You cannot change the Security Code. If you need a  
new one, contact your dealer. The default is 12345.  
If you enter an incorrect security code (CODE ERROR) five  
times in a row, the phone won’t accept any entries for  
the next five minutes.  
Lock Code  
You need the 4-digit lock code to turn on the Automatic  
Phone Lock in Menu 5 1, or to change the Lock Code  
in Menu 5 2. The default Lock Code is 1234.  
12  
 
5. Making and Receiving Calls  
Answering a Call  
Press any key  
(except  
or volume keys) then  
speak  
P
,
E
,
A
If Keyguard is on, only  
U
answers calls. Pressing  
E
call.  
stops the ringing sound, but doesn’t answer the  
Making a Call  
Extend antenna fully  
Key in phone  
number  
U
Your phone can make and receive calls only when it is  
switched on and in the cellular network’s service area.  
NO SERVICE means that you are probably outside the  
cellular service area. No calls can be placed or  
received. If you try to make a call while NO SERVICE is  
displayed, the phone displays WAIT FOR SERVICE, and  
tries to make the call for the next 2 minutes.  
Note: Check with your cellular system operator for  
information about when you need to dial a ‘1’ and/or an  
area code in addition to the number.  
If you make a mistake  
dialing  
Press  
C
once to  
delete the last digit, or  
Press and hold  
clear display  
C
to  
Hanging up  
Press  
E
Speed Dialing  
Key in memory  
location number  
(2 to 99)  
U
The phone recalls the phone number from the memory,  
displays it briefly, then dials it.  
Note: If you press 1  
stored with Menu 2 3, Set Voice Mailbox Number. If  
U, the phone dials the number  
13  
 
 
you press 9  
only if Menu 3 4, Emergency Key 9, is set On!  
U, the phone initiates an emergency call  
Last Number Redial  
Clear display with  
C
U
Redialing any of the last  
10 numbers  
U
then or ▲  
within a second  
Once you see the  
number you want,  
press  
U
to dial it.  
Note: After  
U, you must press or within a  
second to scroll through the last 10 dialed numbers.  
Otherwise, the phone automatically dials the most  
recently dialed number.  
1-Touch Dialing  
Press and hold the key  
(2 to 8) for a few  
seconds until the call  
is started.  
The phone recalls the phone number from memory,  
displays it briefly, then dials it. To use this feature, Menu  
3 3, One Touch Dialing, must be On and you must have  
stored numbers in the location corresponding to the  
number you pressed. See the “Personal Directory”  
chapter for details on storing numbers.  
Note: If you press 1  
stored with Menu 2 3, Set Voice Mailbox Number. If  
you press 9 , the phone initiates an emergency call  
U, the phone dials the number  
U
only if Menu 3 4, Emergency Key 9, is set On!  
Important!  
Official emergency numbers vary by location (e.g. 911  
or other official emergency number). Only one  
emergency number is programmed into your phone to  
be dialed automatically by one key emergency dialing,  
which may not be the proper number in all  
circumstances. One key emergency dialing does not  
operate when Keyguard is in use or when the phone is  
connected to a modem.  
14  
 
Emergency Key 9  
Press 9 then  
OR:  
U
Press and hold 9 for  
more than 3 seconds  
The phone dials the preprogrammed emergency  
number (e.g. 911) with either of these dialing methods.  
You can also dial an emergency number as usual by  
keying in the whole emergency number then  
U.  
Note: Pressing and holding Emergency Key 9 to dial an  
emergency call does not function when Keyguard is in  
use or when the phone is connected to a modem. (See  
“Keyguard” later in this chapter for more information on  
Keyguard.)  
Note: Emergency Key 9 works only if it has been set  
On in Menu 3 4!  
Voice Mail Key 1  
Press and hold  
a few seconds.  
1
for  
The phone dials the number stored with Menu 2 3, Set  
Voice Mailbox Number.  
Earpiece Volume  
Two volume buttons on the side of the phone adjust the  
earpiece volume. The upper volume button increases  
and the lower volume button decreases the volume.  
If an accessory with its own loudspeaker is connected  
to the phone, the volume keys select the volume for  
that accessory.  
Muting/Unmuting the  
phone’s microphone  
Press and hold left  
F (Menu) for few  
seconds  
to Mute or Unmute  
left F (OK)  
Muting and unmuting may be done only during an  
active call.  
15  
 
 
Calling Line Identification  
If you have subscribed to and activated this network  
service, the phone displays the caller’s phone number if  
the system is able to identify it. The phone displays the  
caller’s name if you have stored that caller’s name and  
number, and the person calls you from the number you  
have stored.  
CALL or NO ID CALL displays when the number is not  
available. PRIVATE ID CALL displays when the caller has  
prevented the number from being shown.  
Note: For information about availability of and  
subscription to Calling Line Identification Presentation,  
contact your system operator.  
Distinct Ringing  
You may set your phone to ring distinctly when  
particular people call. To do this, store the person’s  
name and number in your phone and include the  
character “!” somewhere in the person’s name. Your  
phone rings distinctly when there is an incoming call  
from that person’s number. For details on storing  
names and numbers, see “The Personal Directory”  
chapter.  
Note: Distinct Ringing works only when Calling Line  
Identification is active.  
Keyguard  
Press left F (Menu)  
then ∗.  
Keyguard prevents accidental key presses (e.g. when  
the phone is in your pocket). Press left F (Menu) then  
to activate or deactivate keyguard. You can also  
activate Keyguard by using left  
F
(Menu) 11.  
Keyguard cannot be activated when the phone is  
connected to a car kit or in a handsfree desktop  
charger.  
Note: When Keyguard is ON, calls may be possible to  
the emergency number 911 (911  
U
). Pressing 9  
U
should also work, if Menu 3 4, Emergency Key 9, is set  
ON. However, pressing and holding Emergency Key 9  
does not function.  
16  
 
When placing an emergency call, the emergency  
number will be displayed only after you have keyed in all  
its digits. After the emergency call, Keyguard becomes  
active again.  
Answering a call with  
Keyguard active  
Press U.  
During the call the keypad remains unlocked which lets  
you operate the phone as usual. After you end the call,  
Keyguard becomes active again.  
CallWaiting  
With Call Waiting, the active call is put on hold as you  
answer the waiting (incoming) call. This service is  
available only if you have subscribed to it through your  
network operator. For details on Call Waiting availability  
and operation, check with your network operator.  
17  
 
 
6. Voice and Text Messages  
Please check with your operator for the availability of  
message features.  
Voice Messages  
When you receive a voice message, the phone beeps,  
lights the voice message indicator (  
), and displays  
NEW VOICE MESSAGE. The phone shows the number of  
messages if there are more than one.  
To use the methods described below to call your voice  
mailbox, you must store your voice mailbox number in  
your phone, which is described in this section.  
To call your voice  
mailbox after receiving a  
message  
With NEW VOICE  
MESSAGE on display,  
left F  
U
(Listen) OR  
Note that your voice mailbox number must be stored in  
the phone to use this method (see below).  
To call your voice  
mailbox any time  
Press and hold 1  
To store your voice  
mailbox number in the  
phone  
Left  
key in voice mailbox  
number  
left  
F
(Menu) 2 3  
F
(OK)  
Once you enter the number, it is used until you change  
it again.  
Note: The voice mailbox may be provided by the  
network (and the network operator gives you the  
number to call) or you may make use of your own  
answering machine.  
Text Messages  
When the text message network service is available  
and you have subscribed to it, your phone can receive  
and store text messages. The text message function is  
a network service and may not be supported by your  
network.  
18  
 
 
Also, to use text messaging, you must have the phone  
number of your message service center available. The  
phone can store up to 30 text messages, with a  
maximum of about 1,900 characters for all messages  
combined. Contact your network operator for details  
about the text messaging service and the maximum  
number of characters allowed in a message.  
The network may have its own default message that is  
displayed when the phone is in the network coverage  
area. This does not prevent the use of your phone in  
any way.  
Reading Text Messages  
When you receive a text message and there is enough  
space left in the message memory, (nn) NEW TEXT  
MESSAGE(s) (or NEW URGENT or NEW EMERGENCY MESSAGE if  
applicable) and the indicator (  
) are displayed. See  
The Display” for a description of the Text Message  
indicator.  
To read messages  
immediately  
With NEW TEXT  
MESSAGE(s) on display,  
press left  
F
(Read)  
To read text messages any Press right  
F
(Quit) ,  
time then later:  
left  
F
(Menu) 2 2  
press to view the  
first message  
scroll message(s)  
with or ▲  
The messages are shown in the order that they were  
received or stored. New messages are shown first, in  
their order of priority, then old messages, in their  
chronological order.  
NEW indicates an unread message and is followed by  
the date and time of receipt.  
OLD indicates that the message has already been read.  
URGENT indicates that the message received was  
marked “urgent” by the sender.  
19  
 
EMERGENCY indicates that the message received was  
marked “emergency” by the sender.  
LOCKED indicates that you have locked the message. It  
will not be overwritten even if there is no more space in  
memory and there is an attempt to deliver a new  
message to your phone.  
The Option soft key  
With message on  
screen,  
press left  
(Option)  
to option you  
want  
left  
F
F
(OK)  
Read next shows the next message.  
Erase deletes the current message from memory.  
Lock/Unlock allows you to lock and unlock messages.  
When a new message arrives and the message  
memory is full, the new message automatically  
overrides old messages unless they are locked.  
Call back displays the first number from the current  
message and calls that number. You can also just press  
U
while the message is displayed to call back a  
number in the message.  
Setting your phone to  
“Pager Mode”  
Left  
to On  
left  
OR  
left  
F
(Menu) 3 8  
(OK)  
F
F
(Menu) #  
With “Pager Mode” set to On, you can receive Voice  
Mail Notification and Text Messages. You do not receive  
any incoming calls. When you set “Pager Mode” to On,  
the message PAGER ONLY is displayed. The default  
setting is Off. “Pager Mode” is a network service.  
Please check for the availability from your network  
operator.  
20  
 
7. The Personal Directory  
You can store up to 100 numbers and associated  
names in your “Personal Directory”.  
Stored numbers may be up to 16 digits long. Stored  
names may be up to 16 characters long. The phone  
provides you with 8 extended number locations (any  
you choose) that allow the stored number to contain up  
to 30 digits in addition to the name.  
The identical name may be used only once in memory.  
REPLACE NAME? appears when you try to store a name  
already in memory.  
Alpha Mode  
To enter names, retrieve numbers based on names,  
and view names, press  
A. The phone displays ABC to  
indicate that you can use keys to enter letters as well as  
numbers, and that you are viewing names rather than  
numbers.  
When a number is displayed, press  
associated name (if there is one). When a name is  
displayed, press to see the associated number.  
A
to see the  
A
When ABC is displayed, you can enter these characters:  
Key Characters Key Characters  
1
2
3
4
5
6
1
ABC2  
DEF3  
GHI4  
JKL5  
MNO6  
7
8
9
0
#
PQRS7  
TUV8  
WXYZ9  
-?!,.:"’&$( )0  
Enter letters from same key again  
Blank space  
Note: If you include the character ! in the stored name,  
the phone rings distinctly when receiving calls from that  
number. See the “Making and Receiving Calls” chapter  
for more information.  
When entering letters, press and hold the key to switch  
between upper case and lower case letters. Press  
to correct a mistake.  
C
21  
 
 
When ABC is not displayed, you can use the key to  
enter these special characters:  
∗∗ +, links memory locations  
∗∗∗ p, creates a pause  
∗∗∗∗ w, causes the phone to wait for input  
Entering Names  
A
Press and release the  
key labeled with the  
letter you want until  
that letter appears  
for another letter on  
the same key, press ∗  
in between letters or  
wait a few seconds  
Example Name: Lisa  
Press this  
A
5 5 5  
For this effect  
alpha mode  
L
press and hold 4, then 4 4  
I (lower case)  
7 7 7 7  
2
s
a
Storing Numbers and  
Names  
Key in phone  
number  
right  
left  
key in name  
(optional)  
F
(Memory)  
(Store)  
F
left  
left  
F
F
(Store)  
(OK)  
You can also enter another location number or scroll  
through available location numbers with or after  
the STORE IN LOCATION? prompt. You may group stored  
numbers, such as storing your family’s numbers in  
locations 20-29. At STORE IN LOCATION? you would key in  
2* and the phone would store the number in the first  
available location beginning with a 2 (such as 21).  
To fast save  
Key in phone  
number  
press and hold right  
F (Memory)  
22  
 
To add a name to a stored  
phone number  
Recall stored phone  
number  
then key in name  
right F (Memory)  
then left F (Store)  
At STORE IN  
A
LOCATION? enter  
recalled location  
number  
left  
F
(OK) then  
left F (OK) again at  
REPLACE?  
To change the number  
stored with a name  
Recall stored number  
C
repeatedly to  
erase number  
key in new number  
right F (Memory)  
left F (Store) then  
left F (OK) again at  
REPLACE?  
To erase stored names and With display empty,  
numbers  
right F (Memory)  
left F (Store) then  
left F (Store) again  
to name you  
want to erase, or key  
in name, or press  
to see numbers, then ▼  
left (Erase)  
A
F
Press right  
change your mind. Press right  
the erase function. You may also use Menu 01 5 to  
erase.  
F
(Quit) instead of left F (Erase) if you  
F
(Quit) again to exit  
Note: You cannot undo Erase functions so be careful!  
To erase all stored numbers Left F (Menu) 01 5  
to Erase All then  
left  
F
(OK)  
left F (OK) at ARE  
YOU SURE?  
23  
 
Recalling Stored  
Numbers  
With display empty,  
press or .  
Press or repeatedly to scroll through stored  
numbers. Press  
A
to see corresponding names.  
Recalling Stored  
Names  
With display empty,  
press  
A
then or .  
Press or repeatedly to scroll through stored  
names. Press to dial the displayed name’s number.  
U
To recall numbers by  
memory location  
Key in location  
number  
right F (Memory)  
right F (Find)  
Press  
name’s number.  
U
to dial the displayed number or displayed  
To recall numbers by  
name  
Right F (Memory)  
key in name or its  
first few letters  
right F (Find)  
If you enter only the first letters of the name and there is  
more than one name beginning with these letters, press  
or until you see the name you want.  
To begin scrolling at a  
particular location  
Key in first digit of the  
location then then .  
This works for 2-digit locations. If you press 2then ,  
the phone begins scrolling at location 20, if you have  
numbers stored in that location. This is handy if you  
have grouped together stored numbers. (See “Storing  
Numbers and Names” earlier in this section.)  
Status of the Directory  
Left F (Menu) 01 6  
shows empty  
again shows full  
again shows  
hidden  
This lets you see how many empty, full, and hidden  
locations are in your directory.  
24  
 
8. Temporary Lists and Call Timers  
The phone automatically stores the last 10 dialed  
numbers, numbers of the last 10 answered calls, and  
numbers of the last 10 missed calls. It also gives you  
10 temporary storage spaces, in a “Notepad”.  
Note: The phone displays the phone numbers of  
received and missed calls only if the cellular system is  
able to identify the caller.  
To view Dialed  
Numbers  
With display empty,  
press  
or within a  
second  
U
The top right corner of the display shows the location  
number of the last dialed number (L0 - L9). Press  
view associated names, if available. You may also use  
A
to  
Menu 01 1, Dialed Calls. Once you see the number you  
want, press  
U
to dial.  
To view Last Received  
Calls  
With display empty,  
press then to  
scroll the numbers.  
The top right corner of the display shows the location  
number of the 10 most recent calls you have answered  
(R0-R9). Press  
available. You may also use Menu 01 2, Received Calls.  
A
to view associated names, if  
To view Missed Calls  
With display empty,  
press ∗∗ (+) then .  
If MISSED CALLS is  
displayed, press left  
F
(List) then to  
scroll the list, OR  
Press right  
F
(Quit) to view the  
numbers later  
The top right corner of the display shows you the  
location number (U0-U9) of the calling phone numbers  
of the 10 most recent calls you have not answered.  
Press  
A
to view associated names, if available. You  
may also use Menu 01 3, Missed Calls.  
25  
 
 
Notepad  
The Notepad is “temporary storage” for up to 10  
numbers.  
To store numbers and  
names in Notepad  
Store number as  
normal, but at STORE  
IN LOCATION, press #  
left  
F
(OK)  
See “The Personal Directory” chapter for details on  
storing numbers.  
To see numbers and  
names in Notepad  
# then or ▲  
The top right corner of the display shows the location  
number of the Notepad (o0 - o9).  
To clear temporary lists  
and Notepad  
Left  
F
(Menu) 01 4  
This clears Dialed Numbers, Received Calls, Missed  
Calls, and the Notepad. You cannot undo this operation  
so be careful!  
CallTimers  
Left  
F
(Menu) 01 7  
to show duration  
of the LAST CALL  
again to show the  
duration of ALL CALLS  
This shows call durations for the currently-selected  
NAM. The phone has separate timers for each NAM  
(phone number) your phone uses.  
Note: The actual time invoiced for calls by your service  
provider may vary, depending upon items such as  
network features, rounding off for billing, and taxes.  
To clear Call Timers  
Left  
to CLEAR TIMERS  
left (OK)  
F
(Menu) 01 7  
F
key in security code  
at Security code: then  
left  
F(OK)  
26  
 
9. Touch Tones  
Your phone is a “Touch Tone” phone, meaning that it  
creates certain sounds when you press the keys.  
These sounds can be used for many automated, over-  
the-phone services such as checking your bank  
balance, using your voice mailbox options, and even  
checking airplane arrival and departure times.  
Touch Tones are called “DTMF” (Dual Tone  
Multifrequency) tones in the phone.  
Sending Individual  
TouchTones  
Press keys during call.  
Touch Tones can be used only when a call is active. You  
would use the Individual Touch Tone feature when, for  
example, you are prompted to “press 1 and then the  
star (*) button”. You would simply press 1 *.  
Note: Individual Touch Tones can be sent only if Menu 4  
3 is not set to Off. Menu 4 3 is described in this section.  
Sending Strings of  
TouchTones  
During a call, with the  
display empty:  
Recall from memory  
the string you want to  
send  
left F  
then U  
(Menu)  
You can transmit Touch Tones one by one by pressing  
the keypad during a call. Additionally, you can store a  
whole digit sequence in a memory location and send it  
as Touch Tones. You could use this for frequently-used  
strings of numbers, such as your bank account  
number.  
The phone sends (as Touch Tones) the digits that are  
currently on the display. You may also press and hold  
left  
F
(Menu) then press to Send DTMF then left  
F
(OK) then left  
F
(Quit) to send a string of Touch Tones.  
To store a Touch Tone  
string  
Store Touch Tone  
strings the same way as  
you store phone  
numbers.  
27  
 
 
For example, you could store your bank account  
number in the personal directory.  
To store Touch Tone  
strings with a phone  
number  
Key in the phone  
number  
press ∗∗∗ (p) or  
∗∗∗∗ (w)  
key in the Touch  
Tone string  
store the number in  
the normal way  
∗∗∗ creates a “p” (pause) character. When you recall  
this number sequence from memory and press  
the phone dials the phone number, pauses 2.5  
U,  
seconds, then sends the DTMF digits. You can add as  
many “p” characters as you need.  
∗∗∗∗ creates a “w” (wait) character. When you recall this  
number sequence from memory and press  
U, the  
phone dials the phone number, then waits for you to  
press the left (DTMF). This is handy if you are calling  
F
a number that then prompts you to enter information,  
such as your bank account number.  
To link a stored phone  
number to DTMF digits  
in another memory  
location  
Key in the phone  
number  
press ∗∗ (+)  
key in memory  
location storing the  
DTMF string  
store the number in  
the normal way  
Use this if the phone number and DTMF digits do not fit  
in one storage location; it links the phone number to  
the memory location storing the DTMF string.  
∗∗ creates a “+” (link to another memory location).  
When you recall this number sequence from memory  
and press  
U, the phone dials the phone number,  
displays digits stored in the memory location you have  
entered, then sends them as Touch Tones.  
28  
 
Entering only a “+” at the end of a stored number  
causes the phone to prompt you for a memory location  
after the call is connected. The phone expects a  
memory location after the “+” character. Enter a  
location number and press left  
contents of that memory location as Touch Tones.  
F
(OK) to send the  
Touch Tone Settings in the Phone  
Your phone’s Touch Tone settings are Menu 4 3, Manual  
DTMF Tones, and Menu 4 4, Auto DTMF Length.  
Menu 4 3, Manual DTMF  
Tones  
Left  
to your choice  
left (OK)  
F
(Menu) 4 3  
F
This determines the length of the Individual Touch Tones  
when you press keys during calls. Note that regardless  
of this setting, strings of Touch Tones can be sent.  
Continuous means the tone sounds for as long as you  
hold the key. Fixed sets the tone length to 100 ms,  
regardless of how long you press the key. Off turns the  
tones off, meaning that no tones are sent when you  
press individual keys.  
Menu 4 4, Auto DTMF  
Length  
Left  
to your choice  
left (OK)  
F
(Menu) 4 4  
F
This determines the length of Touch Tones in strings.  
Short sets the DTMF tone length to 100 ms. Long sets  
the DTMF tone length to 500 ms.  
29  
 
10. The Menu  
The phone’s menus and submenus allow you to tailor  
the phone to suit your tastes.  
Menu guidelines  
Left F (Menu) enters the menus  
→▼ and step through menus, submenus, and  
options  
A gives help text on menus and submenus and  
goes to the next screen of help text if there are  
several  
Right F (Quit) goes back one level  
C  
exits the menu facility without making changes  
Scrolling through  
the menus  
Left F (Menu)  
→▼ or to menu  
you want  
Left F (Select or  
OK) enters submenus  
and chooses options  
The current setting appears first in lists of setting  
options.  
Entering menus by  
number  
Left F (Menu) then  
menu number then  
submenu number then  
setting number.  
The menus, submenus and setting options are  
numbered. The number is shown in the display’s top  
right corner. Once you reach the menu or submenu you  
want, you can also use or to see options.  
Note: Press the menu, submenu, and setting numbers  
within a couple of seconds of each other when using  
this method.  
30  
 
 
Summary Of Menu Functions  
MEMORY FUNCTIONS Dialed Calls 01 1  
Menu 01  
Received Calls 01 2  
Missed Calls 01 3  
Clear All Call Lists 01 4  
Memory Erase Options 01 5  
Memory Status 01 6  
Call Timers 01 7  
MESSAGES  
Menu 2  
Listen to Voice Messages 2 1  
Read Messages 2 2  
Set Voice Mailbox Number 2 3  
CALL SETTINGS  
Menu 3  
Ringing Volume 3 1  
Ringing Tone 3 2  
One-Touch Dialing 3 3  
Emergency Key 9 3 4  
Automatic Redial 3 5  
Automatic Answer 3 6  
Calling Card 3 7  
Pager Mode 3 8  
PHONE SETTINGS  
Lights 4 1  
Menu 4  
Keypad Tones 4 2  
Manual DTMF Tones 4 3  
Auto DTMF Length 4 4  
Personal Reminder Note 4 5  
Countdown Timer 4 6  
Restore Settings 4 7  
Menu List 4 8  
Language 4 9  
SECURITY OPTIONS  
Menu 5  
Automatic Phone Lock 5 1  
Change Lock Code 5 2  
Restrict Calls 5 3  
Outgoing Calls 5 3 1  
International Calls 5 3 2  
Incoming Calls 5 3 3  
Hide Memory 5 4  
31  
 
NETWORK SERVICES Dual Mode Selection 6 1  
Menu 6  
Voice Privacy 6 2  
(see note below)  
Call Forwarding 6 3  
Forward All Calls 6 3 1  
Forward If Busy 6 3 2  
Forward If Not Answered 6 3 3  
Forward If Out of Reach 6 3 4  
Call Waiting 6 4  
Selective Call Acceptance 6 5  
Allowed Numbers List 6 5 1  
Blocked Numbers List 6 5 2  
Send Own Number 6 6  
Network Feature Setting 6 7  
SYSTEM SELECTION Selects which cellular system to use.  
Menu 7  
NAM SELECTION  
Menu 8  
Selects the phone’s system and  
current phone number.  
NUMBER EDITOR  
Allows editing of the  
Menu 9  
currently-displayed number.  
ALERT OPTIONS  
Menu 10  
Selects type of ringing or silent  
service.  
ACTIVATE KEYGUARD Activates the keypad locking  
Menu 11 mechanism.  
Menu 6 Note: The items in Menu 6 shown in italics are  
visible ONLY when activated with Menu 6 7!  
Network Services  
Some of the menu functions are network services.  
These functions can be utilized only if provided by your  
cellular network. To make use of a network service, you  
must first subscribe to it. For availability and  
subscription, contact your network operator.  
Menu 01, Memory Functions  
See “The Personal Directory” and “Temporary Lists and  
Call Timers” chapters for descriptions of the items in  
Menu 01.  
Menu 2, Messages  
See the “Voice and Text Messages” chapter for  
descriptions of these menu items.  
32  
 
Menu 3, Call Settings  
Menu 3 1, Ringing Volume  
You hear each ringing level as you scroll through the  
volume levels. When the phone is connected to a  
handsfree desktop charger, handsfree car kit, or  
headset, the ringing volume can be set separately for  
those accessories with this menu.  
Menu 3 2, Ringing Tone  
The phone plays a sample of each pattern as you  
scroll.  
Note: The ringing tone is the same for all accessories.  
Menu 3 3, One-Touch Dialing  
With this feature on, you can dial any of the phone  
numbers stored in personal directory locations 2-9 by  
pressing and holding the number of the personal  
directory location.  
Note: Pressing 9 and  
U
initiates an emergency call if  
the Emergency Key 9 function is set On! Pressing and  
holding 1 always initiates a call to the number stored  
with Menu 2 3, Set Voice Mailbox Number.  
Menu 3 4, Emergency Key 9  
With this feature on, the phone makes an emergency  
call when you press 9 then  
preprogrammed emergency number 911.  
U. The phone dials the  
You can also dial an emergency call by pressing and  
holding 9 for about three seconds, after which the call is  
initiated. However, this method does not work when  
Keyguard is active or when the phone is connected to a  
modem.  
Menu 3 5, Automatic Redial  
When this is on, your phone redials the number you are  
trying to call (if the network is busy) up to 10 times.  
Press  
E
to end the call attempts.  
Menu 3 6, Automatic Answer  
When the phone is connected to the headset or the  
handsfree facility of the car kit, you can set the phone  
to answer a call automatically after one ring. The car kit  
must be equipped with the ignition sense option.  
33  
 
Menu 3 7, Calling Card  
To store a calling card  
Left  
F
(Menu) 3 7  
to the card you  
want then left  
(OK)  
F
key in security code  
at Security code: then  
left  
F
(OK)  
key in access  
number at Access  
Number:  
press  
card name (optional)  
left (OK)  
A
then key in  
F
key in card number  
at Card ID Code: then  
left  
F
(OK)  
To change stored calling card information (such as your  
card number), go through these steps, but use the  
key to erase already stored information. Key in the new  
C
information then press left  
F
(OK).  
Menu 3 8, Pager Mode  
See the “Voice and Text Messages” chapter for a  
description of this function.  
Making Calling Card  
Calls  
Key in phone  
number  
press and hold  
U
for a few seconds until  
the phone displays  
CARD CALL  
press left  
after Wait For Tone, Then  
F
(OK)  
Press OK prompt  
Depending on the type of calling card, there may be an  
additional prompt, Wait For Tone, Press OK Again. Press left  
F
(OK) again at this prompt.  
Note: This dialing method works only with cards that  
require you to first dial the access number, then the  
phone number, then your card number, in that order.  
34  
 
Menu 4, Phone Settings  
Menu 4 1, Lights  
With lights on, the keypad lights come on when you  
press a key or have an incoming call, and go off 15  
seconds later.  
When the phone is connected to a car kit, desktop  
charger, or cigarette lighter charger, the lights are on  
permanently when this setting is ON; when this setting is  
OFF, the lights come on when you press a key or have  
an incoming call, and go off 15 seconds later.  
Note: You can turn on the lights for 15 seconds by  
pressing the power key quickly regardless of this  
setting.  
Menu 4 2, Keypad Tones  
You can select the volume level or turn off the sound  
the phone makes when you press a key.  
Note: The keypad tone volume is set separately for  
each accessory you use.  
Menu 4 3, Manual DTMF Tones  
Menu 4 4, Auto DTMF Length  
See the “Touch Tones” chapter for descriptions of these  
items.  
Menu 4 5, Personal  
Reminder Note  
Left  
F
(Menu) 4 5  
key in a new  
message or edit the  
existing one  
left  
to Store or Erase  
left (OK)  
F
(Option)  
F
The Personal Reminder Note displays when the phone  
is switched on. The maximum length is 30 characters.  
Characters you key in are added to the left of the  
cursor. Press  
cursor.  
C
to delete characters to the left of the  
35  
 
Press or to move the cursor right or left. Store  
stores the new or edited note for later use. The note is  
displayed each time you switch the phone on. Erase  
removes the note from the display and from the  
memory.  
Next time you switch the phone on, the stored note  
displays. Once you have read the note, press left  
(Keep) to save it or right (Erase) to delete it. It  
displays each time you turn the phone on until you  
erase it.  
F
F
Menu 4 6, Countdown  
Timer  
Left  
F
(Menu) 4 6  
key in time to count  
down at Set timer:  
(appears in h and m)  
left  
press right  
(Quit) twice to exit  
F
(OK)  
F
The phone sounds an alarm and displays COUNTDOWN  
COMPLETED when it finishes counting down the amount  
of time you enter. The timer stops if the battery runs out  
or if you turn the phone off.  
An incoming call overrides the timer alarm. After you  
have completed the call, COUNTDOWN COMPLETED  
appears, but the phone does not sound an alarm.  
To stop the timer before  
it alarms  
Follow the steps  
above, but key in 0000  
at Set timer:.  
To clear the alarm when  
it is sounding  
Press left  
F
(OK) .  
Menu 4 7, Restore Settings  
You can reset the settings of certain menu functions to  
factory defaults (as in a new telephone).  
Note: The memory, timers, counters and the language  
selection are not reset.  
The following settings are set to the values shown:  
Ringing Volume  
Ringing Tone  
One-Touch Dialing  
Level 4 (3 in car mode)  
Type 1  
Off  
36  
 
Emergency Key 9  
Automatic Redial  
Automatic Answer  
Pager Mode  
Off  
Off  
Off  
Off  
Lights  
On  
Keypad Tones  
Level 2  
Continuous  
Long  
Complete  
Off  
1234  
Ana. & Dig.  
Off  
Manual DTMF Tones  
Auto DTMF Length  
Menu List  
Automatic Phone Lock  
Lock Code  
Dual Mode Selection  
Voice Privacy  
Ringing Options  
Ring  
Menu 4 8, Menu List  
This function lets you choose either a shortened or  
complete menu. The complete menu contains all menu  
items, whereas the short menu shows only the most  
essential menu items, namely: Messages (Listen to Voice  
Messages, Set Voice Mailbox Number), Phone Settings (Restore  
Settings, Menu List), Alert Options, and Activate Keyguard.  
Menu 4 9, Language  
You can choose the language your phone uses for all of  
its displays.  
Menu 5, Security Options  
Most of the phones security features require a five-digit  
security code, which is normally supplied with the  
phone. If you forget the security code, contact your  
dealer. Since this code allows access to all the  
operations of the phone, store it in a safe place,  
separately from the phone.  
Menu 5 1, Automatic Phone Lock  
When you turn this on, the phone’s lock becomes  
active after you switch the phone off and back on. With  
the lock on, you must enter the lock code each time  
you want to access memory and menu functions.  
To enter the lockcode:  
At Enter lock code: key  
in the lockcode then  
press left  
F
(OK).  
37  
 
When the phone is locked, calls may be possible to the  
emergency number programmed into your phone (e.g.  
911 or other official emergency number) including calls  
with the Emergency Key 9. Also, you may call the  
number stored in location 100.  
To answer a call with  
Auto Lock on:  
Press  
U.  
To call the number in  
location 100 with Auto  
Lock on:  
or then  
U
Note: To unlock the phone permanently after locking it,  
you need to enter this function and select the AUTO LOCK  
OFF option.  
Menu 5 2, Change Lock code  
In a lock code, only digits 0 to 9 are accepted. Lock  
codes are four digits long.  
Menu 5 3, Restrict Calls  
You can prevent the phone from dialing a number or  
receiving a call. Note that none of the restriction options  
prevents calls to the preprogrammed emergency  
number 911.  
Menu 5 3 1, Outgoing Calls  
Allowed means that all calls can be made as usual.  
Blocked means that no calls can be made. Limited means  
that calls can be made only to phone numbers stored  
in certain personal directory locations. You are  
prompted for a FROM: and TO: value. For example, enter  
FROM: 1 and TO: 15, to allow only calls to the numbers  
stored in locations 1-15. Or, enter FROM : 3 and TO: 3, to  
allow only calls to the number stored in location 3.  
You can store an area code (for example, 214) in a  
memory location (e.g., 15). Then select Limited, and  
enter 15 in the FROM: and TO: values. You can then  
make calls to only numbers starting with 214.  
When calls are restricted, calls may be possible to the  
emergency number programmed into your phone (e.g.  
911 or other official emergency numbers).  
38  
 
Menu 5 3 2, International Calls  
Allowed means you can make international calls  
(i.e., calls beginning with the international prefix  
preprogrammed in your phone). Blocked means you  
can’t make international calls with the phone.  
Menu 5 3 3, Incoming Calls  
Allowed means you can receive all calls. Blocked means  
you can receive no calls.  
Menu 5 4, Hide Memory  
This function lets you hide phone numbers in your  
personal directory. The names stored in the hidden  
memory locations are shown on the display, but the  
numbers are shown as asterisks ().  
To hide only one location, enter the location number at  
both the Hide From: and Hide To: prompts (shown below).  
To hide a series of locations, such as locations 10-15,  
enter the first location, for example 10, at Hide From: and  
the last location, for example 15, at Hide To:.  
To hide numbers:  
Left  
F
(Menu) 5 4  
key in security code  
at Security code: then  
left  
F
(OK)  
to Yes then left  
F
(OK)  
at Hide From: enter  
first location to be  
hidden then left  
(OK)  
F
at Hide To: enter last  
location to be hidden  
then left  
F
(OK)  
Menu 6, Network Services  
Menu 6 1, Dual mode Select  
You can set the phone to work in AMPS (Analog) and/or  
TDMA (Digital) networks. The network can always  
override your setting, however. When the phone is in  
dual mode (Ana.& Dig.), the cellular network automatically  
selects the right mode. The phone automatically returns  
to dualmode (Ana.& Dig.) when you switch the phone off  
and back on.  
39  
 
Menu 6 2, Voice Privacy  
You may set this to On or Off. Voice Privacy On encrypts  
the voice channel only in networks with digital service. If  
you have this feature on and voice privacy becomes  
inactive for any reason the phone displays VOICE PRIVACY  
INACTIVE and beeps. Check for availability of this  
function from your network operator.  
Note: Menu items 6 3, 6 4, 6 5, and 6 6 appear on  
your phone’s menu only if you are using the first  
telephone number of your phone (see Menu 8, NAM  
Selection), you have subscribed to the service from  
your network operator, and you have activated the  
menu items with Menu 6 7.  
Menu 6 3, Call  
Forwarding  
Left  
to forwarding  
option  
left  
to Activate or  
Cancel  
left  
F
(Menu) 6 3  
F
(OK)  
This appears on the menu  
only if activated with  
Menu 6 7  
F
(OK)  
This forwards your calls to the number that is on  
display when you select Activate. Forward All Calls (Menu 6  
3 1) forwards all incoming calls. Forward If Busy (Menu 6 3  
2) forwards calls only when you are on the phone.  
Forward If Not Answered (Menu 6 3 3) forwards calls if you  
don’t answer. Forward If Out of Reach (Menu 6 3 4)  
forwards calls if you are out of the serving cellular  
network. Cancel All Forwarding (Menu 6 3 5) cancels all  
currently-active forwarding options.  
Menu 6 4, Call Waiting  
Left  
to Activate or  
Cancel  
left  
F
(Menu) 6 4  
This appears on the menu  
only if activated with  
Menu 6 7  
F
(OK)  
If you activate call waiting, you will receive a tone during  
a call to let you know you have an incoming call. The  
phone may also display the incoming caller’s  
identification. To answer the incoming call, press  
U.  
40  
 
Menu 6 5, Selective Call  
Acceptance  
Left  
F
(Menu) 6 5  
to Allowed  
Numbers List or Blocked  
Numbers List  
to Activate,  
Deactivate, or Edit  
This appears on the menu only  
if activated with Menu 6 7  
left  
F
(OK)  
With this, you can program the network to screen  
incoming calls. The caller’s phone number is compared  
to the list you select and the call is then either rejected  
or allowed. Allowed Numbers List allows calls when the  
incoming caller’s number matches one on the allowed  
numbers list. Blocked Numbers List rejects calls when the  
incoming caller’s number matches one on the blocked  
numbers list.  
Activate turns the restriction on. Deactivate turns the  
restriction off. Edit allows you to add numbers to or  
remove numbers from the list.  
If you select Edit, you can then choose to Add No. to the  
list, Remove No. from the list, or Remove All (clear the list).  
Confirm your selection or setting with left  
F
(OK).  
Contact your network operator to have this feature  
activated.  
Menu 6 6, Send Own  
Number  
Left  
F
(Menu) 6 6  
to Yes (to show  
number) or No (to not  
show number)  
left  
F
(OK)  
This appears on the menu only  
if activated with Menu 6 7  
key in the number  
you want to call at  
Number: prompt  
press  
U
to call  
This specifies whether or not to display (i.e., Send) your  
phone number to the person you are calling. This  
feature functions only in systems equipped with Calling  
Number Identification. Contact your network operator  
to see if this is available.  
41  
 
If you do not make a selection, the phone uses the  
default network setting, which is always active when  
you switch on your phone. Check with your network  
operator to find out the network default.  
Menu 6 7, Network Feature Setting  
Call Forwarding, Call Waiting, Selective Call  
Acceptance, and Send Own Number are services  
available through your network operator or dealer.  
When you subscribe to any of these services, your  
operator or dealer gives you a separate code that you  
use to activate and deactivate each service.  
Menu 6 7 lets you store all the codes you use in your  
phone. Once you store the code in your phone, the  
service appears as a menu item. You can then use the  
menu to activate and deactivate CALL FORWARD, CALL  
WAITING, SELECTIVE CALL ACCEPTANCE, and SEND OWN  
NUMBER.  
To remove an item from the menu, go through the  
steps shown in “To Store Codes”, but simply press left  
F
(OK) after the Feature code: prompt (without entering  
a code).  
To store codes:  
Left  
F
(Menu) 6 7  
at Feature Code: enter  
the code you want to  
store in your phone  
(e.g. *74) then left  
F
(OK)  
to the service that  
the code applies to,  
then left  
to suboption (as  
applicable) then left  
F
(OK)  
F
(OK)  
to Activate or  
Cancel  
left  
F
(OK)  
42  
 
Menu 7, System Select  
In each cellular service area there are usually two  
cellular operators operating public systems of type “A”  
or “B”. One of the public systems (A or B) is your home  
system (depending on your operator) but your phone  
can work with both types of systems. With Menu 7, you  
can select the type of system the phone should use.  
If you have registered with several operators, use Menu  
8, NAM Select, to select the current home system. The  
currently-selected NAM determines which system is  
currently your “home” system.  
Both A&B means that when roaming, the phone first tries  
to use a home-type system (such as “B” if the home  
system is B). If this is not available, it then tries to use a  
non-home type system (such as “A” if the home system  
is B).  
Hometype A or Hometype B means the phone tries to use  
only a home-type system.  
Non-Home A or Non-Home B means the phone tries to use  
only a non-home-type system.  
Home Area means the phone cannot roam at all.  
Note: To use this option, your home system operator  
must have a roaming agreement with the host  
company whose system you try to use. Contact your  
home system operator for the roaming agreements  
they have with other operators.  
Depending on the selection either the A or B indicator  
(or both) will appear. Neither indicator appears if Home  
Area is selected.  
43  
 
Roaming Indicators  
When the phone begins roaming, it beeps, displays  
ROAMING, and lights the roaming indicator ( ). For a  
description of the two states of the roaming indicator,  
see “The Display and Connectors” chapter. Some  
cellular systems can recognize a roaming phone  
automatically. In other systems, you must contact the  
cellular operator before the system can recognize the  
phone. You will need to give your phone number, your  
phone’s ESN (electronic serial number), and how you  
plan to pay for your calls. There is usually an additional  
charge for roaming calls.  
Note: The ESN for your cellular phone is printed under  
the battery pack on the back of the phone.  
Menu 8, NAM  
Selection  
Left  
to phone number  
to use  
left  
F
(Menu) 8  
F
(Select)  
The cellular operator programs your phone with  
software called a Number Assignment Module (NAM)  
when you register for service. You can register your  
phone with up to 3 cellular systems, each giving your  
phone a different NAM, which contains unique data for  
you such as your phone number, home service area,  
and A-key.  
Only one NAM is in effect at a time. When you select a  
phone number, you are also selecting which system  
you are using as your home system. The first phone  
number displayed with this menu is the phone number  
in use.  
Note: You need at least one active number to make  
calls. You cannot change from one NAM to another  
during a call.  
44  
 
Menu 9, Number  
Editor  
The number you want  
to edit must be on the  
display  
Left  
C
left of cursor  
F
(Menu) 9  
removes the digit  
or moves the  
cursor right or left  
This function lets you edit the existing digits of a phone  
number. You can press to dial the edited number.  
U
Menu 10, Alert Options  
With Ring & Vibra the phone rings and vibrates for  
incoming calls. With Ring the phone sounds a ringing  
tone. With Beep Once the phone sounds a short beep.  
With Vibrate the phone only vibrates. With Silent, the  
phone only flashes its lights and CALL.  
The vibrator function can be activated, but it functions  
only if an optional vibrating battery is used (BBT-1XV).  
Contact your dealer for more information.  
For different ringing volume levels and tone patterns,  
see Menu 3 1 and Menu 3 2.  
When the phone starts to alert, you can press  
mute the ringing tone. The phone continues to alert  
E
to  
silently by flashing the lights and the text CALL on the  
display.  
When Beep once, Vibrate or Silent has been chosen, the  
phone displays SILENT. Call related tones like message  
received or voice mail indication beeps become shorter  
with one of the above options selected.  
When Silent has been chosen, Automatic Answer  
(Menu 3 6) does not work.  
If Vibrate is selected and no vibrating battery is attached,  
the phone automatically goes into Silent mode for  
incoming calls. If the phone is set to Vibrate and then  
placed in a Handsfree stand, the phone rings only.  
When the phone is connected to a HF desktop charger,  
HF car kit, or headset, the indication mode can be set  
separately for each of these accessories.  
45  
 
Menu 11, Activate  
Keyguard  
Press left  
then 11  
F
(Menu)  
Keyguard remains on until you deactivate by pressing  
left  
F
(Menu) then . When the function is activated  
and there is no call in progress, no key tones are heard  
and no key presses are be accepted, except for calls to  
911 (or other official preprogrammed emergency  
number) and  
U
and  
E.  
When placing an emergency call, the emergency  
number is displayed only after you have keyed in all its  
digits. After the emergency call, Keyguard automatically  
becomes active again. Keyguard cannot be activated  
when the phone is connected to a car kit or in the  
handsfree desktop charger.  
46  
 
11. Data and Fax Calls  
The phone can send or receive data when it is  
connected to a compatible data terminal (such as a fax  
machine or PC) through a data adapter. See the  
documentation for the data adapter and terminal.  
Only analog data can be sent and received.  
The phone recognizes the type of the connected  
terminal automatically. For instance, if a fax machine is  
connected to the phone, the phone makes a fax call.  
Note: Pressing and holding 9 to initiate an emergency  
call does not work when the phone is connected to a  
modem.  
To start an outgoing data or fax call  
Check that the data terminal is properly installed.  
A data or fax transmission is always started from  
the data terminal.  
Ê
Ë
Start the transmission from the data terminal in the  
normal way. For example, to send a telefax, start  
the transmission from the fax machines keypad.  
The phone calls the number you dialed from the  
terminal’s keypad.  
After the transmission, end the call from the data  
Ì
terminal, or press  
E.  
To receive a data call  
Check that the data terminal is properly installed.  
Ê
Ë
Press  
U
to answer the call. OR, if you know that  
the incoming call is a data call, you can answer the  
call from the data terminal.  
After the transmission, end the call from the data  
Ì
terminal. OR, press  
E.  
47  
 
To receive a fax call  
Check that the data terminal is properly installed.  
Ê
Ë
Press  
U
to answer the call. OR, if you know this  
is an incoming fax, you can answer the call from  
the fax machine’s keypad.  
After the transmission, end the call from the fax  
Ì
machine’s keypad. OR, press  
E.  
48  
 
12. Accessories  
In addition to the battery and chargers described in  
this manual, an extensive accessory range is  
available. You can select the accessories that meet  
your specific communication needs. For availability,  
please check with your local dealer.  
Use only batteries, antennas, chargers, and accessories  
approved by the phone manufacturer. The use of any  
other types will invalidate any approval or warranty  
applying to the telephone, and may be dangerous.  
IMPORTANT! See “The Battery” chapter of this guide  
for important battery information.  
A new battery’s full  
performance is achieved only  
after two or three complete  
charge and discharge cycles!  
Approximate battery operation times  
Battery  
TalkTime,  
StandbyTime,  
Digital/Analog Digital/Analog  
Slim BBH-1S  
550 mAh NiMH  
70 min. / 45 min.  
26-30 hours  
14-19 hours  
BBT-1XV Vibrating 70 min. / 45 min.  
550mAh NiMH  
26-30 hours  
14-19 hours  
Ultra Extended  
BBH-2H  
150 min. / 90 min. 52-60 hours  
28-38 hours  
1100 mAh NiCd  
Ultra Extended  
BBH-1H  
210 min./120 min. 71-83 hours  
40-52 hours  
1500 mAh NiMH  
49  
 
 
Note: Battery operation times vary according to signal  
conditions, network parameters set by the operator,  
and how you use the batteries. Using the phone near  
the network’s base station consumes less power.  
Keeping the antenna fully extended whenever possible  
maintains the connection to the network with less  
power.  
Approximate charging times  
Battery  
ACH-3U  
ACH-4U  
1 hour  
Slim BBH-1S  
4.5 hours  
BBT-1XV Vibrating 4.5 hours  
1 hour  
Ultra Extended  
BBH-2H  
9 hours  
2 hours  
Ultra Extended  
BBH-1H  
14 hours  
2 hours, 30 min.  
Note: It is recommended that you allow your battery to  
fully discharge before you recharge it. Batteries last  
longer and perform better if allowed to discharge fully at  
least once a week.  
Standard Travel Charger  
(ACH-3U)  
This charger can be used with all  
battery options. Note that you  
cannot make calls during charging  
when the battery is fully  
discharged.  
Plug the charger into a wall outlet  
and connect the lead to the base  
of the phone or to a light desk stand.  
Fast Travel Charger (ACH-4U)  
This lightweight AC charger can be  
used with all battery options. Calls  
can be made during charging, even  
with a fully discharged battery.  
To use the Fast Travel Charger  
(ACH-4U), plug it into a standard  
120V AC wall outlet, and connect  
the lead from the charger to the  
base of the phone.  
50  
 
The charger can also be used together with the  
optional Compact Desktop Charging Stand (CHH-2)  
and Light Desk Stand (CHH-2L).  
Fast Cigarette Lighter Charger (LCH-2)  
You can charge the phone  
battery from your vehicle  
battery by using the Fast  
Cigarette Lighter Charger  
(LCH-2). You can also use the  
charger with stands CHH-2  
and CHH-2L (described  
below). Calls are possible  
during charging.  
A green light indicates the  
charger is ready for charging (when not charging) or  
finished charging (if it has been charging). A red light  
indicates charging. The battery charging times are the  
same as those for the Fast Travel Charger (ACH-4U).  
The input voltage range is from 10 to 30V DC, negative  
grounding. Avoid prolonged charging with the Fast  
Cigarette Lighter Charger (LCH-2) when the car engine  
is not running; this may cause the battery of your car to  
drain. Note also that in some cars the cigarette lighter  
plug is not provided with electricity if the ignition is not  
switched on.  
Fuse Replacement  
The Fast Cigarette Lighter Charger contains a  
protective fuse. The fuse is located in the charger tip.  
If the charger does not work, the fuse may be blown,  
in which case replace it with a 3 amp. 125 volt fuse.  
Never use a fuse with a higher rating.  
Compact Desktop Charging Stand (CHH-2)  
The Compact Desktop  
Charging Stand (CHH-2)  
allows you to place both the  
phone and a spare battery for  
charging at the same time in  
the stand. It is compatible with  
all battery options.  
51  
 
The charger starts to charge the spare battery as soon  
as it has finished charging the phone battery.  
Connect either the Fast Travel Charger (ACH-4U) or the  
Fast Cigarette Lighter Charger (LCH-2) to the stand,  
and then plug the Fast Travel Charger or Fast Cigarette  
Lighter Charger into a wall outlet or vehicle respectively.  
Place the phone and/or the spare battery in the stand.  
To discharge the spare battery, press the blue button  
on the stand. When the battery is totally discharged,  
recharging starts automatically. (If you wish to stop  
discharging, press the button again to start the  
charging right away.) Only the spare battery can be  
discharged.  
The blinking red light indicates discharging, the  
continuous red light indicates recharging and the green  
light indicates trickle charging. The phone is ready for  
use when the green light appears (check the charge on  
the phone display).  
Light Desk Stand (CHH-2L)  
The Light Desk Stand (CHH-2L)  
offers support for the phone  
during charging. Used together  
with the Standard Travel Charger  
(ACH-3U), Fast Travel Charger  
(ACH-4U,) or the Fast Cigarette  
Lighter Charger (LCH-2), this  
drop-in stand is an economical  
choice when you need your  
phone close at hand, always ready for calls.  
Charging is indicated by the scrolling battery bars on  
the right side of the phone’s display. Charging is  
finished when the scrolling stops.  
52  
 
13. Care and Maintenance  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you to fulfill the warranty  
obligations and to enjoy this product for many years.  
Keep the phone and all its parts and accessories out of  
small childrens’ reach.  
Keep the phone dry. Precipitation, humidity and liquids  
contain minerals that will corrode electronic circuits.  
Do not use or store the phone in dusty, dirty areas. Its  
moving parts can be damaged.  
Do not store the phone in hot areas. High temperatures  
can shorten the life of electronic devices, damage  
batteries, and warp or melt certain plastics.  
Do not store the phone in cold areas. When the phone  
warms up (to its normal temperature), moisture can  
form inside the phone, which may damage electronic  
circuit boards.  
Do not attempt to open the phone. Non-expert  
handling of the phone may damage it.  
Do not drop, knock or shake the phone. Rough  
handling can break internal circuit boards.  
Do not use harsh chemicals, cleaning solvents, or  
strong detergents to clean the phone. Wipe it with a  
soft cloth slightly dampened in a mild soap-and-water  
solution.  
If the phone or any of its accessories are not working  
properly, take them to your nearest qualified service  
facility. The personnel there will assist you, and if  
necessary, arrange for service.  
53  
 
14. Technical Data  
Cellular System  
Weight  
TDMA and AMPS  
7.9 oz (224g) with 550mAh  
NiMH battery  
Capacity  
169 cc  
Frequency Range  
824.010 - 848.970 MHz (TX)  
869.010 - 893.970 MHz (RX)  
Transmitter Output Power  
Battery Voltage  
0.4mW to 600mW nominal  
6 V nominal  
Charging Current  
800mA typical  
Operating Temperature  
-20° C to + 40° C  
(-4° F to + 104° F)  
Number of Channels  
Number of NAMs  
Memory Locations  
Memory Capacity  
832  
3
100  
Alpha: 16 digits per location  
Numeric: 16 digits per location  
+ 30 digits in 8 locations.  
USA  
NOKIA MOBILE PHONES – 6200 Courtney Campbell  
Causeway, Suite 900, P.O. Box 30730, Tampa, FL 33630.  
Tel: 1-800-666-5553  
CANADA  
NOKIA PRODUCTS LTD. – 575 Westney Rd. South,  
Ajax, Ontario L1S 4N7. Tel: (905) 427-6654  
NOKIA and the Arrows logo are registered trademarks of Nokia  
Corporation.  
The information contained in this User Guide was written for dual-mode  
phone NHC-4NE/HE.  
The right to make changes and improvements to any of the products  
described in this guide without prior notice is reserved.  
Issue No. 1. © 1996 Nokia Mobile Phones. All rights reserved.  
These commodities are authorized by the U.S. Government for export only  
to Canada, Mexico, or the United States. They may not be resold, diverted,  
transferred, or otherwise disposed of in any other country, either in their  
original form or after being incorporated through an intermediate process  
into other end-items, without the written approval of the U.S. Department  
of State.  
54  
 
 
NOKIA One-Year Limited Warranty  
Nokia Mobile Phones, Inc. (“NMPI”) warrants that this cellular  
phone (“Product") is free from defects in material and  
workmanship, according to the following terms and conditions:  
1.  
The limited warranty for the Product extends for ONE (1)  
year beginning on the date of purchase of the Product.  
2.  
The limited warranty extends only to the original consumer  
purchaser (“Consumer”) of the Product and is not  
assignable or transferable to any subsequent  
purchaser/end user.  
3.  
4.  
The limited warranty extends only to Consumers who  
purchase the Product in the United States.  
During the limited warranty period, NMPI will repair, or  
replace, at NMPI’s option, any defective parts, or any  
parts that will not properly operate for their intended use  
with new or factory rebuilt replacement items. No charge  
will be made to the Consumer for any such parts . NMPI  
will also pay for the labor charges incurred by NMPI in  
repairing or replacing the defective parts. The external  
housing and cosmetic parts shall be free of defects at the  
time of shipment and, therefore, shall not be covered  
under these limited warranty terms.  
5.  
6.  
Upon request from NMPI, the Consumer must provide  
information to reasonably prove the date of purchase.  
The Consumer shall bear the cost of shipping the Product  
to the Customer Service Department of NMPI. NMPI shall  
bear the cost of shipping the Product back to the  
Consumer after the completion of service under this  
limited warranty.  
7.  
a)  
The Consumer shall have no coverage or benefits under  
this limited warranty if any of the following conditions are  
applicable:  
The Product has been subject to abnormal use, abnormal  
conditions, improper storage, exposure to moisture or  
dampness, unauthorized modifications, unauthorized  
connections, unauthorized repair, misuse, neglect, abuse,  
accident, alteration, improper installation, or other acts  
which are not the fault of NMPI, including damage caused  
by shipping and blown fuses.  
b)  
The Customer Service Department at NMPI was not notified  
by Consumer of the alleged defect or malfunction of the  
Product during the applicable limited warranty period.  
55  
 
c)  
d)  
The Product serial number plate or the accessory date  
code has been removed, defaced, or altered.  
The defect or damage was caused by the defective  
function of the cellular system, or by inadequate signal  
reception by the external antenna.  
8.  
If a problem develops during the limited warranty period,  
the Consumer should take the following step-by-step  
procedure:  
a)  
b)  
The Consumer shall return the Product to the place of  
purchase for repair or replacement processing.  
If a” is not convenient the Consumer may contact the  
Customer Service Department at NMPI, at the phone  
number listed on the bottom of this page for further  
instructions.  
c)  
d)  
The Consumer shall ship the Product prepaid and insured.  
Expenses related to removing the Product from an  
installation are not covered under this limited warranty.  
The Consumer will be billed for any parts or labor charges  
not covered by this limited warranty. The Consumer shall  
be responsible for expenses related to reinstallation of the  
Product.  
e)  
If the Product is returned to the Customer Service  
Department at NMPI during the limited warranty period,  
but the problem with the Product cannot be fixed under  
the terms and conditions of this limited warranty, the  
Consumer will be notified and given an estimate of the  
charges the Consumer must pay to have the Product  
repaired, with all shipping charges billed to the Consumer.  
If the estimate is refused, the Product will be returned  
freight collect. If the Product is returned to the Customer  
Service Department at NMPI after the expiration of the  
warranty period, NMPI’s normal service policies shall  
apply and the Consumer will be invoiced for all shipping  
charges.  
9.  
The Product consists of newly assembled equipment that  
may contain used components which have been  
reprocessed to allow machine compliance with Product  
performance and reliability specifications.  
56  
 
10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR  
FITNESS FOR A PARTICULAR PURPOSE OF USE,  
SHALL BE LIMITED TO THE DURATION OF THE  
FOREGOING WRITTEN WARRANTY, OTHERWISE, THE  
FOREGOING WARRANTY IS THE PURCHASERS SOLE  
AND EXCLUSIVE REMEDY AND IN LIEU OF ALL OTHER  
WARRANTIES, EXPRESS OR IMPLIED. NMPI SHALL  
NOT BE LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES OR A LOSS OF  
ANTICIPATED BENEFITS OR PROFITS, RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT OR  
ARISING FROM THE BREACH OF THE WARRANTY  
EVEN IF NMPI KNEW OF THE LIKELIHOOD OF SUCH  
DAMAGES.  
11. Some states do not allow limitation of how long an implied  
warranty lasts, so the above limitation may not apply to  
you (the Consumer). Some states do not allow the  
exclusion of incidental or consequential damages, so the  
above limitation or exclusions may not apply to you (the  
Consumer). This limited warranty gives you specific legal  
rights and you may also have other rights which vary from  
state to state.  
12. NMPI neither assumes nor authorizes any authorized  
service center or any person or entity to assume for it any  
other obligation or liability beyond that which is expressly  
provided for in this limited warranty.  
13. Questions concerning this limited warranty may be directed  
to the Customer Service Department at Nokia, 6200  
Courtney Campbell Causeway, Suite 900, Tampa, FL  
33630. Telephone (813) 288-3800 or 1-800-666-5553,  
Facsimile: (813) 287-6612.  
14. The limited warranty period for Nokia Product Corp.  
supplied attachments and accessories are specifically  
defined within their own warranty cards and packaging.  
57  
 
14. Technical Data  
Cellular System  
Weight  
TDMA and AMPS  
7.9 oz (224g) with 550mAh  
NiMH battery  
Capacity  
169 cc  
Frequency Range  
824.010 - 848.970 MHz (TX)  
869.010 - 893.970 MHz (RX)  
Transmitter Output Power  
Battery Voltage  
0.4mW to 600mW nominal  
6 V nominal  
Charging Current  
800mA typical  
Operating Temperature  
-20° C to + 40° C  
(-4° F to + 104° F)  
Number of Channels  
Number of NAMs  
Memory Locations  
Memory Capacity  
832  
3
100  
Alpha: 16 digits per location  
Numeric: 16 digits per location  
+ 30 digits in 8 locations.  
LATIN AMERICA  
NOKIA MOBILE PHONES – 2300 Valley View Lane, Suite 100  
Irving, TX 75062 USA. Tel: (214) 257-9800  
USA  
NOKIA MOBILE PHONES – 6200 Courtney Campbell  
Causeway, Suite 900, P.O. Box 30730, Tampa, FL 33630.  
Tel: 1-800-666-5553  
NOKIA and the Arrows logo are registered trademarks of Nokia  
Corporation.  
The information contained in this User Guide was written for dual-mode  
phone NHC-4NE/HE.  
The right to make changes and improvements to any of the products  
described in this guide without prior notice is reserved.  
Issue No. 1. © 1996 Nokia Mobile Phones. All rights reserved.  
These commodities are authorized by the U.S. Government for export only  
to Canada, Mexico, or the United States. They may not be resold, diverted,  
transferred, or otherwise disposed of in any other country, either in their  
original form or after being incorporated through an intermediate process  
into other end-items, without the written approval of the U.S. Department  
of State.  
 

Miele Clothes Dryer t 277 c User Manual
Miele Washer W 4144 WPS User Manual
MTD Lawn Mower 111 500R000 User Manual
MTD Lawn Mower Series 430 Thru 439 User Manual
MTD Log Splitter 753 05193 User Manual
NETGEAR Switch GS700TP 724TP User Manual
NewAir Air Conditioner AC 10000E User Manual
Omega Vehicle Security Stud Sensor LV850 User Manual
Oregon Scientific Clock Radio BARM699A User Manual
Panasonic Microwave Oven NN G354 User Manual