Intelligent Hybrid System
Single Line Telephone
User Guide
Placing Calls
Placing an Outside Call
Trunk Code
Telephone Number
?
?
?
?
9
ꢀꢁ Listen for Dial Tone before dialling the Telephone Number.
Placing an Intercom Call
Extension Number
?
?
?
ꢀꢁ Your call will ring or voice-announce. If you hear ringing, wait for an answer. If you hear a beep, begin
speaking. Dialling “1” changes voice/ring mode (where the destination is an XN120 Telephone).
Placing Calls Quickly
Abbreviated Dialling <for outside calls>
Common/Personal
Abbv. Bin No.
Common/
Personal
Abbv.
1
1
8
8
?
?
?
3
4
Group Abbv. Bin No.
Group
Abbv.
?
?
?
ꢀꢁCommon/Personal Abbreviated Dialling Bins are numbered as follows (by default):
2-digit dialling: Common = 00-79, Personal = 80-99, or
3-digit dialling: Common = 000-899, Personal = 990-919.
ꢀꢁ Single Line Telephones cannot store a number into an Abbreviated Dialling Bin. For this you must
use an XN120 Display Telephone or PC Programming application. Ask your NEC Authorised Supplier
for details.
ꢀꢁ System programming is required to provide Group Abbreviated Dialling. Ask your NEC Authorised
Supplier for details.
2
Placing Calls Quickly
Last Number Redial <for outside and intercom calls>
8
1
6
ꢀꢁ Intercom numbers can also be stored under Last Number Redial. (System programming is required.
Ask your NEC Authorised Supplier for details.)
If your call doesn’t go through…
Setting Camp On / Callback / Trunk Queuing
<Camp On>
<Callback>
Wait without
hanging up
8
5
0
(Hear Busy Tone,
No Answer, or
Trunk Unavailable)
Wait for the
system to call
you back
ꢀꢁ <Camp On> For Intercom Call, when you hear ringing, wait for the called party to answer.
For Trunk Queuing, when you hear Dial Tone, begin dialling the telephone number.
ꢀꢁ <Callback> For Intercom Call, when your phone starts the ringing, lift handset and wait for the called
party to answer.
For Trunk Queuing, when your phone starts the ringing, lift handset, hear Dial Tone and
begin dialling the telephone number.
Cancelling Camp On / Callback / Trunk Queuing
8
7
0
(When Camp On set)
3
If your call doesn’t go through…
Setting / Answering a Message Waiting Indication
Set
8
8
4
4
1
1
(Hear Busy Tone or No Answer)
Your phone’s
MW Indicator
is flashing
Answer
ꢀꢁ When you set MW, the called party’s MW Indicator starts to flash.
ꢀꢁ When you answer MW, the MW Indicator shall automatically go off when the called party answers.
Cancelling a Message Waiting Indication (at originating extension)
Extension Number
you want to cancel MW
8
7
1
?
?
?
Clearing All Message Waiting Indications (at any extension)
8
7
3
ꢀꢁ Clear all messages (you have left for other extensions and messages other extensions have left for
you).
Answering Calls
Answering an Outside / Intercom Call
(Ringing)
ꢀꢁ Each type of incoming call can have its own distinctive ringing pattern. Ask you NEC Authorised
Supplier for details.
4
Answering Calls
Picking up another Extension’s Call
In same
Group
8
8
7
6
6
1
7
9
5
In other
Groups
Extension Number
Pickup for
Specified
Extension
?
?
?
ꢀꢁ System programming is required to allow Group Call Pickup. Ask your NEC Authorised Supplier for
details
Hold / Transferring Calls
Placing a Call on Hold / Retrieving a Held Call
RECALL
RECALL
Hold
Retrieve
(Talking)
(Don’t hang up)
ꢀꢁ If you go on hook, the held call will ring back.
ꢀꢁ This operation puts your call on Exclusive Hold. Other extension users can not take the call off Hold.
Retrieving a Held Outside Call
Trunk No.
you want to retrieve
7
7
2
?
?
Transferring a Call to another Extension
Extension Number
RECALL
?
?
?
(Talking)
(Announce)
5
Forwarding Calls / Do Not Disturb
Do Not Disturb (DND)
DND : Trunk Incoming Call
DND : Intercom Incoming Call
DND : Trunk & Intercom Incoming Call
DND : Transferred (CFW) Call
DND : Cancel
8
4
7
1
2
3
4
0
ꢀꢁ When you set DND, the Internal Dial Tone pattern changes.
Call Forwarding / Follow Me
CFW Condition
Extension Number
CFW Type
8
8
8
?
?
?
?
?
Busy / No Answer
Follow Me
No Answer
FWD All Calls
2
3
4
6
2
Dual Ring
FWD Outside Calls only
FWD Intercom Calls only
7
3
4
Immediate
Cancel
0
ꢀꢁ When you set a Call Forward, the Internal Dial Tone pattern changes.
Call Forward Off-Premise
Telephone Number
6
0
?
?
?
7
1
3
To Cancel
ꢀꢁ When you set a Call Forward, the DND/CONF Key’s lamp flashes and the Internal Dial Tone pattern
changes.
6
Conferencing
Establishing a Conference Call
Repeat for additional parties
Extension Number
RECALL
8
2
6
?
?
?
(Talking)
(Talk)
Trunk Code Telephone
?
?
0
RECALL
ꢀꢁ You can repeat this operation to add additional parties. You
may be able to have up to 8 parties in total (including your
extension).
<press twice>
In the European Union
The symbol depicted here has been affixed to your product in order to inform you that electrical
and electronic products should never be disposed of as municipal waste.
Electrical and electronic products including the cables, plugs and accessories should be
disposed of separately in order to allow proper treatment, recovery and recycling. These products
should be taken to a designated facility where the best available treatment, recovery and
recycling techniques are available. Separate disposal has significant advantages: valuable
materials can be re-used and it prevents the dispersion of unwanted substances into the
municipal waste stream. This contributes to the protection of human health and the environment.
Please be informed that a fine may be imposed for illegal disposal of electrical and electronic
products via the general municipal waste stream.
In order to facilitate separate disposal and environmentally sound recycling, NEC Infrontia has made arrangements for local
recycling in all member states of the European Union. In case your electrical and electronic products need to be disposed of
please refer to the contractual agreements that your company has made upon acquisition of these products. Should this
information not be available, please contact us at [email protected].
For countries outside the European Union
Disposal of electrical and electronic products in countries outside the European Union should be done in line with local
regulations. If no arrangement has been made with NEC Infrontia or your supplier, please contact the local authorities for
further information.
Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation
with respect to, any of the equipment covered. This manual is subject to change without notice and NEC Infrontia Ltd has no
obligation to provide any updates or corrections to this manual. Further, NEC Infrontia Ltd also reserves the right, without prior
notice, to make changes in equipment design or components as it deems appropriate. No representation is made that this
manual is complete or accurate in all respects and NEC Infrontia Ltd shall not be liable for any errors or omissions. In no event
shall NEC Infrontia Ltd be liable for any incidental or consequential damages in connection with the use of this manual. This
document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may
be photocopied or reproduced without prior written consent of NEC Infrontia Ltd.
Copyright © 2004 by NEC Infrontia Ltd
All Rights Reserved.
Issue 1.2 July 2005
991404-5
|