INSTALLATION INSTRUCTIONS FOR PART 95-7337B
APPLICATIONS
KIA Soul
2010
95-7337B
KIT FEATURES
• DDIN Head Unit Provision
• ISO Stacked Head Unit Provision
• Painted Matte Black
KIT COMPONENTS
A) Double DIN Trim Plate B) Double DIN Brackets
B
A
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-7303 - Kia / Hyundai Harness 2009-up
Antenna Adapter:
• 40-KI11 - Kia / Hyundai Antenna Adapter 2007-up
TOOLS REQUIRED:
• Small Flat Blade Screwdriver • Panel Removal Tool
• Phillips Screwdriver
1-800-221-0932
© COPYRIGHT 2007-2009 METRA ELECTRONICS CORPORATION
95-7337B DASH DISASSEMBLY
KIA SOUL 2010
A
B
C
1
2
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
Unclip and remove the radio/climate
control trim panel. (Figure A)
Remove (4) Phillips screws securing
the climate control. (Figure B)
3
4
Remove (4) Phillips screws securing
the radio. (Figure C)
Continue to kit assembly.
1
95-7337B KIT ASSEMBLY
DOUBLE DIN / STACKED ISO DIN HEAD UNIT
PROVISIONS
*Note: Refer also to the instructions included with the aftermarket radio.
A
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
1
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
2
3
Attach the Double DIN brackets to the
Double DIN Trim Plate. (Figure A)
Slide the radio into the bracket/radio
housing assembly and secure using
the screws supplied with the radio.
(Figure B)
B
4
Reassemble dash in reverse order of
disassembly.
2
95-7337B INSTRUCTIONS
NOTES
3
95-7337B INSTRUCTIONS
NOTES
4
95-7337B INSTRUCTIONS
NOTES
5
95-7337B INSTRUCTIONS
INSTRUCTIONS
06
1-800-221-0932
REV. 11/03/09 © COPYRIGHT 2003-2009 METRA ELECTRONICS CORPORATION INST95-7337B
|