MMP8500
User’s Guide
Personal FM
Stereo MP3/
WMA Player
Before operating this product,
please read these instructions completely.
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start
of your musical enjoyment. Now it’s time to consider how you can maximize the fun
and excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and
clear without annoying blaring or distortion and, most importantly, without affecting
your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher
volumes of sound. So what sounds “normal” can actually be loud and harmful to your
hearing. Guard against this by setting your equipment at a safe level BEFORE your
hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.
Since hearing damage from loud noise is often undetectable until it is too late, this
manufacturer and the Electronic Industries Association’s Consumer Electronics Group
recommend you avoid prolonged exposure to excessive noise. This list of sound levels
is included for your protection.
2
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
We
WantYou
LISTENING
ForALifetime
EIA
EST. 1924
3
LOCATION OF CONTROLS
1
2
5
6
7
3
4
8
9
10
1. Headphone Jack
2. VOLUME +/– Buttons
3. Display
4. Battery Compartment and SD/MMC Memory Card Slot (Side of Unit)
5. PRESET/Power On-Off/Stop Button
6. Function Switch (Play, Pause, Skip+/–, Tuning +/–)
7. MODE Button (Main Menu/Setting)
8. LOCK Switch
9. EQ/REPEAT Button
10. USB Jack
4
BATTERY INSTALLATION
When the bars in the battery indicator (in the display) become low
(see figure 1), replace the battery as follows.
1. Open the battery door by sliding it towards the bottom of the
unit as shown in figure 2.
Battery
Low
Battery
Full
Figure 1
2. Flip the battery plate upward and insert one (1) “AAA” cell
battery (included) as shown in figure 3. Alkaline batteries are
recommended for the longest playing time.
3. Flip the battery plate to its original position as shown in figure 4 and slide
the battery door back on.
+
Figure 2
Figure 3
Figure 4
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the battery as indicated. Reversed
batteries may cause damage to the device.
3. If the device is not to be used for a long period of time, remove the battery to prevent damage
or injury from possible battery leakage.
4. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
5
INSTALLATION (CONTINUED)
ARM STRAP
1
2
Insert the arm strap into the slot on the Pull the arm strap and insert it into the
rear of the unit and pull through.
buckle.
HEADPHONE JACK:
3
Turn on the unit and set the volume
to low. Insert the headphone’s plug
into the Headphone jack.
Pull the strap and fold over, then fasten
the velcro.
6
DOWNLOADING AND TRANSFERRING FILES
TO INSTALL THE "DIGITAL AUDIO PLAYER" CD SOFTWARE
For Windows98 or 98SE:
The USB mass storage function will not be activated without driver installation. To
activate the USB mass storage function, please use the installation CD-Rom to install
the driver.
For Windows ME, Windows2000 or Windows XP:
Windows will automatically detect the Audio player without installing the CD software
when the USB cable is connected. But to Format the player, update the driver or to
uninstall the software, you must install the CD software.
For Macintosh OSX:
Macintosh OSX will automatically detect the Audio player without installing the CD
software . Do not install the software when using a Macintosh.
If you are connecting your player to your computer for the first time, please follow
these instructions:
Procedure to Install Player Driver
1. Insert the Installation CD-ROM into the CD Drive. Then the Auto-run program will
start to install the driver automatically.
NOTE: If the setup does not start, please run the setup.exe in the CD-ROM Drive
directory. Click setup.exe on the installation CD.
7
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)
2. Follow the on screen instructions to install the driver. Please install the Player driver
in the directory "C:\Program Files\Memorex\Digital Audio Player”".
WARNING: DO NOT change the installation path for the "Memorex Solid State Digital
Audio Player". Otherwise, the driver will not run properly.
3. After successfully installing the
driver, you must restart windows.
8
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)
4
After installation has completed, the "Memorex Solid
State Digital Audio Player" will be added to the
Program folder.
TRANSFERRING FILES
You can download MP3 files from the internet or use
encoding software to convert music that you have on an
audio CD into MP3 formats. Once these files are stored
on your computer you can easily copy them to your
MMP8500.
Connect the computer to your MMP8500 player using
the supplied USB cable.
Press the POWER button to turn the unit on; the
following will be displayed in the LCD screen of your
MMP8500:
A "Removable Disk" window will automatically pop up
on your computer screen. If a SD/MMC memory card
has been inserted (see page 14), another folder will
appear on your computer screen to represent the card.
To add more files and songs to your player simply drag and drop MP3, WMA or WAV
files from anywhere on your computer into the "Removable Disk" window.
When you are finished, see the Safely Remove Hardware procedure on page 10
before disconnecting the MMP8500.
9
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)
SAFELY REMOVING YOUR PLAYER FROM THE COMPUTER
NOTE: To avoid damage to your player or data loss, always follow the procedure listed
below before disconnecting the USB cable from your computer or disconnecting the
player from the USB cable.
Using your mouse, double click the "Safely
Remove Hardware" icon on the task bar.
From the "Safely Remove Hardware"
window, select "USB Mass Storage
Device" and click the "Stop" button. The "Stop a Hardware Device" window will pop up
as shown:
Click "OK" and when a "Safe to Remove
Hardware" window is displayed and you may
remove the player from the USB cable or remove
the USB cable from the computer.
10
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)
FORMATTING THE PLAYER
NOTE: All files will be deleted when the player is formatted.
With the player turned off, connect the player and PC using the supplied USB cable.
Press the POWER button to turn the unit on.
Click "Start" on the taskbar and select "Programs". From the Program menu, select
"Memorex Solid State Digital Audio Player", and then click "Format"; a format dialogue
box will pop up, click "Start" and the application program will format the player.
16
Once the format has completed, click "Close" to exit the format program.
TO SAFELY REMOVE YOUR PLAYER
Double click the "Safe Removal" icon to display the "Unplug or Eject Hardware"
window. Select the device you want to remove and click the "Stop" button.
Click "OK" and when a "Safe to Remove Hardware" window is displayed and you may
remove the player from the USB cable or remove the USB cable from the computer.
11
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)
UPDATING THE FIRMWARE (You must first connect your unit to your
computer)
Occasionally, Memcorp may release new software (firmware) for this unit enhancing it's
functionality.
2. Unzip the firmware into the C:\Program Files\Memorex\Digital Audio Player directory (if this
is the one selected when installing the drivers).
3. While the unit if off, connect the USB cable as described previously.
4. Click on START and select PROGRAM. From the PROGRAM folder, select Memorex Solid
State Digital Audio Player, then click on UPDATE; the Update dialog box will appear with the
following message: Please place your MP3 device into recovery mode to continue
5. Press and hold the PRESET/Power On-Off/Stop button. Wait until you see the dialog box
begin to load, then release the button; in a few seconds you will see the update screen
appear with the new version.
6. Click on START and the application will begin to download the firmware to your player. If a
dialog box appears on the screen, select YES for updating and Formatting the unit (this will
delete the files in the unit) or select NO for updating the unit without formatting the unit.
REALONE PLAYER INSTALLATION (PC ONLY):
1. Insert the Installation CD.
2. Click on START and select PROGRAM. From the PROGRAM folder, select Windows
Explorer.
3. Select the directory of Windows Explorer and click on the folder of RealOne Player; various
versions in different languages of the application will be displayed.
4. Double click the version that you want to install; the installation will then begin
automatically. For the English version, please double click the “RealOnePlayerV2Gold_en”
file to begin installation.
5. Follow the RealOne InstallWizard online prompts to complete the installation.
NOTE: Before saving tracks to your RealOne player, open the RealOne player and click on
"CD" at the bottom of the screen. Next, click on Preferences; select MP3 audio as the format,
then click "OK". This will ensure the music is recorded in the correct format for the MMP8500
to read.
12
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)
INSTRUCTIONS FOR DOWNLOADING SONGS FROM THE COMPUTER
USING REALONE SOFTWARE
1
2
Install the Real One Software.
When the unit is on, connect the USB cable to the MP3 Player and the USB port of the
computer. Once the USB cable is connected to the player “Mass Storage” will be
displayed on the LCD display for approximately three seconds.
3
4
5
To make sure the computer recognizes the MP3 player, double click on MY
COMPUTER, and check for a drive called Removable disk. Double click on Removable
Disk, and make sure the Capacity is equal to 122MB, and minimize this window.
Insert a Music CD into the CD-ROM drive of your computer, and open Real One Media
Browser. Next, click on the CD icon on the bottom tool bar of the Media Browser. Click
on preferences, choose MP3 Audio, and 96Kbps Stereo and click OK.
Click the "Save Tracks" icon on the bottom menu bar to open the "Select Tracks" dialog
box. Select the desired tracks on the CD and click "OK" to save the tracks into My
Library; "Pending" will appear at the end of the tracks' name and "Saved" will shown
after the tracks' name when finished saving. Choose “My library” from the Menu Bar
and double click on the yellow folder (Show organizer). Double click on the "All Media"
(view your entire library) to view a list of the saved songs.
6
Click on the Yellow plus (+) sign on the left bottom tool bar and click on “Add File” to
add the tracks to the MP3 player. Once you click on Add File, another dialog box will
appear on your screen, double click on the name of the CD that you want to load into
your MP3 player and highlight all of the songs. Right click on the songs and select
“Send To”, then click on the MP3 player. If you do not see your MP3 player, click on
Copy to copy the songs.
7
8
Open the Removable disk window, right click to open another dialog box and click on
paste to load your songs into your MP3 player. Once you paste the songs, you will
notice that the MP3 display will show files transferred into the box which means your
files are been loaded into the player.
Once the files are finished loading into the player, disconnect the USB cable, insert
headphones and listen to your music.
13
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)
EXTERNAL MEMORY CARD
TO AVOID DAMAGE, make sure the unit is off before inserting or removing the card.
1. Open the battery compartment door by sliding it towards the bottom of the unit, as
shown in figure 1.
2. Insert a SD/MMC memory card (not included) up to 512MB, facing up as shown in
figure 2.
3. Connect the USB cable as described previously.
4. Drag MP3 and WMA files into the new folder. The memory card indicator will appear
at the bottom left corner on the display.
5. To remove the SD/MMC memory card, push the edge of the card as shown in figure
3, then the card will spring out. Carefully remove the card.
Front of
the card
Figure 1
Figure 2
Figure 3
14
OPERATION
TURNING THE POWER ON
LOCK SWITCH
1
1
Turn the unit on by pressing the Slide the LOCK switch to the Lock (down)
PRESET/Power button; the Memorex start position; the lock indicator will appear in the
screen will appear in the display temporarily. display and no buttons will be able to be
To turn the unit off, press and hold the pressed. This is useful when you do not want
PRESET/Power button; “Holding to Power Off” the station/track changed by accidentally
will appear in the display. When the unit turns pressing a button. Slide the LOCK switch to the
off, release the PRESET/Power button.
Unlock (up) position to cancel the Lock function.
EQ
NOTES:
•
1
If you attempt to turn the power
on while the LOCK switch is in
the Lock (down) position, the
unit will show “HOLD” and then
turn off.
While playing MP3s, press and hold the
EQ/REPEAT button until the EQ display text
becomes highlighted. Then, repeatedly press the
EQ/REPEAT button to select the desired EQ
setting: NORM (Normal), ROCK, UBAS (Ultra
Bass), JAZZ, CLAS (Classical) or POP. Wait two
seconds and the unit will exit EQ setting mode.
•
The EQ feature is only available
when playing MP3/WMA files.
15
OPERATION (CONTINUED)
TO LISTEN TO THE FM RADIO
1
2
2
3
1
Turn the unit on by pressing the PRESET/Power Press the MODE button ‚; the Main menu will
button; the Memorex start screen will appear in
the display temporarily.
appear in the display. Within six seconds, push the
Function switch towards ƒ until FM RADIO
is selected, then press the Function switch „ to
the Play/Pause position to select it.
3
4
2
1
When a station is broadcasting in stereo, press
the EQ/REPEAT button until STEREO appears
in the display to listen in stereo. Press the
EQ/REPEAT button again until the word
STEREO disappears to listen in mono. If the
station is not strong enough, or not broadcasting
in stereo, the indicator will not appear.
Push and release the Function switch
towards
For rapid search tuning, push and hold the
Function switch towards ‚ or
‚ or
ƒ to tune a station.
ƒ
for one second, then release; the unit will
automatically search and stop on the next
strongest station.
CONTINUED ON THE NEXT PAGE
16
OPERATION (CONTINUED)
5
6
1
2
To turn the unit off, press and hold the
PRESET/Power button until the unit turns off.
Press the VOLUME + button ‚ to increase
the volume or the VOLUME – button ƒ to
decrease the volume.
ANTENNA
FM – The headphones act as an antenna for FM. Extend the headphone wire
for best FM reception.
17
OPERATION (CONTINUED)
TO MANUALLY SET A STATION INTO MEMORY
1
2
Make sure the PRESET indicator does not Push the Function switch; “STORE” will
appear in the display. If it does, press the appear in the display.
PRESET/Power button and the PRESET
indicator will disappear. Tune a desired
station as described in the previous section.
3
4
2
1
Select a preset number (“C01” to “C10”) by When the desired memory number appears,
push the Function switch to store the preset;
“STORE” will disappear from the display
and the station will be set into memory.
pushing the Function switch towards
‚ or ƒ.
18
OPERATION (CONTINUED)
TO AUTOMATICALLY SET STATIONS INTO MEMORY
1
2
Press and hold the Function switch until “AUTO
SCAN” appears in the display. The unit will
automatically store the ten next strong stations
into memory. New FM Stations will overwrite
previous presets.
NOTE: If less than ten stations have been
scanned into the memory, the memory will keep
at a frequency with 87.5MHz
Make sure the PRESET indicator does not
appear in the display. If it does, press the
PRESET/Power button and the PRESET
indicator will disappear.
TO RECEIVE MEMORY PRESETS
1
1
3
2
Press the Preset/POWER On-OFF/Stop
button ‚; “PRESET” will appear in the display.
Select
a
preset number by pushing the
ƒ or „.
Function switch towards
Press the Preset/POWER On-OFF/Stop
button ‚ to exit the preset mode, ”PRESET”
indicator will not disappear from the display
19
OPERATION (CONTINUED)
TO LISTEN TO MP3s/WMAs
1
2
1
2
3
2
1
Turn the unit on by pressing the PRESET/Power
button ‚; the Memorex start screen will appear in
the display temporarily. Press the Function switch ‚ If the unit is in the Radio or Stop Watch mode,
to the Play/Pause position to start playing the
MP3/WMA files. The MP3 information will scroll
across the display, the Bit Rate and EQ setting will
alternate at the bottom of the display and the song
number and timer will appear at the top of the
display.
press the MODE button ‚; the Main menu will
appear in the display. Within six seconds, push
the Function switch towards
cƒ until
MUSIC PLAYER is selected, then press the
Function switch „ to select it.
3
4
1
2
Press the VOLUME + button ‚ to increase
the volume or the VOLUME – button ƒ to
decrease the volume.
While playing MP3s, press and hold the
EQ/REPEAT button until the EQ display text
becomes highlighted. Then, repeatedly press the
EQ/REPEAT button to select the desired EQ
setting: NORM (Normal), ROCK, UBAS (Ultra
Bass), JAZZ, CLAS (Classical) or POP. Wait two
seconds and the unit will exit EQ setting mode.
CONTINUED ON THE NEXT PAGE
20
OPERATION (CONTINUED)
NOTE:
5
• See pages 7 through 12 for information
on uploading MP3 and WMA files to this
unit.
Press the PRESET/Power button to stop
MP3/WMA playback.
TO PAUSE PLAYBACK
2
1
During playback, if you wish to pause the Push the Function switch again to resume
file momentarily, push the Function switch; playback; the sound will return and the timer
playback will pause and the timer will stop will start counting again.
counting.
21
OPERATION (CONTINUED)
FORWARD/REVERSE SKIP
1
2
During playback, push the Function switch During playback, push the Function switch
towards
to advance the player to the towards
to move the player back to the
beginning of the currently playing file. Push
the Function switch towards repeatedly
beginning of the next file. Push the
Function switch towards
repeatedly to
to move the player back to lower numbered
files.
advance the player to higher number files.
HIGH-SPEED MUSIC SEARCH
During playback, push and hold the
1
2
Function switch towards
‚ or
ƒ
1
to move the player forward or backward
within a file to locate a specific musical
passage. The player will move forward or
backward at high speed as long as the the
Function switch is held. When you release
the Function switch, normal playback will
resume.
22
OPERATION (CONTINUED)
REPEAT PLAYBACK OF A FILE
2
1
3
2
1
To repeat a single file, press the EQ/REPEAT The specific track you selected will be
1
repeated continuously. To cancel Repeat
playback, press the EQ/REPEAT button
until the Mode indicator disappears.
button ‚ once while playing a file; “ ” will
appear in the display. Press the Skip/Search
ƒ or
„ button to select the specific
track that you wish to repeat.
REPEAT PLAYBACK OF ALL FILES
2
1
To repeat all files, press the EQ/REPEAT All tracks on the disc will be repeated
continuously. To cancel Repeat playback,
A
button twice while playing a file; “ ” will
press the EQ/REPEAT button until the Mode
indicator disappears.
appear in the display.
23
OPERATION (CONTINUED)
TO RANDOMLY PLAY ALL THE FILES AND THEN STOP
2
1
To randomly play all the files and then The unit will play all the tracks in random
stop, press the EQ/REPEAT button three order. When all the tracks have been played,
S
the unit will stop. To cancel Random
playback, press the EQ/REPEAT button until
the Mode indicator disappears.
times while playing a file; “ ” will appear
in the display.
TO RANDOMLY PLAY ALL THE FILES CONTINUOUSLY
2
1
1
2
To randomly play all the files continuously, The unit will play all the tracks in random order
press the EQ/REPEAT button four times until the PRESET/Power button ‚ is pressed
S
while playing a file; “ ” will appear in the
display.
(top stop playback). To cancel Random
playback, press the EQ/REPEAT button ƒ
until the Mode indicator disappears.
24
OPERATION (CONTINUED)
USING THE STOP WATCH
1
2
2
3
1
Press the MODE button ‚; the Main menu will
appear in the display. Within six seconds, push
Turn the unit on by pressing the
PRESET/Power button; the Memorex start
screen will appear in the display
temporarily.
the Function switch towards
ƒ until STOP
WATCH is selected, then press the Function
switch „ to select it.
3
4
Press the Function switch to start the timer; the
timer will then start counting up. Press the
Function switch to stop the timer; the timer will
then stop counting. Press the Function switch to
start the timer up again.
Press the PRESET/Power button to reset
the timer to “00:00:000”.
NOTES:
•
The MP3/WMA files can still be played back while using the stop watch.When listening to
MP3/WMAs (see page 20), follow steps 2 through 4 above to operate the stop watch.
To turn off MP3/WMA playback when in the Stop watch mode, you need to turn off the unit
or change the unit back to MP3 mode.
•
25
OPERATION (CONTINUED)
TO CHANGE THE SETTINGS
1
2
2
1
Within six seconds, select one of the settings by pushing
the Function switch towards ‚ or ƒ.
CONTRAST: Adjust the contrast.
Press and hold the MODE button until the Setting
menu appears in the display.
EQUALIZER: Select the EQ setting.
PLAY TIMER: Set Elapsed or Remaining Time,
which will appear when playing a file.
LIGHT TIMER: Set the time the backlight will
remain on after activated.
3
3
1
Push the Function switch ‚ to select the
setting; the respective menu will appear.
Adjust the setting by pushing the Function
switch towards
ƒ or
„. When the
desired setting is done, push the Function
switch ‚ again to confirm.
26
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before calling for service.
SYMPTOM
Unit will not
turn on.
CAUSE
Dead battery, or not
installed properly.
SOLUTION
Replace battery and install
properly.
LOCK switch is in the Slide switch to the Unlock
Lock (down) position. (up) position.
No sound.
Headphones are not
inserted.
Insert headphones.
Volume is set too
low.
Raise the volume using the
VOLUME + button.
The MP3 or WMA files Download uncorrupted
are corrupted.
Station not tuned.
files.
FM distorted.
Retune station and extend
headphone wire.
Download Failure.
The computer is not
recognizing the
MMP8500.
Damaged USB cable. Replace cable.
The MMP8500 must be Turn the MMP8500 on.
turned on.
The USB cable is
Make sure USB cable is
not securely connected. securely connected.
Driver is not installed
or computer is not
compatible.
Install driver and/or see
pages 7 through 12 for
compatibility.
27
TROUBLESHOOTING GUIDE (CONTINUED)
There are rare instances when after downloading the firmware the player will
not turn on; in these cases the unit will need to be reset.To reset the unit,
perform the following steps:
1. Click on the START button of your computer.
2. Select PROGRAM.
3. Select Memorex Solid State Digital Audio Player.
4. Click on UPDATE.
5. The Update screen will appear with the following message: “Please place
your MP3 device into recovery mode to continue”.
6. Open the battery compartment on the player and lift the positive
connector from the positive end of the battery.
7. Connect the USB cable to your computer and the other end to the
MMP8500.
8. Connect the positive connector back on the battery.
9. Press and hold the POWER button; the dialog box will begin to load.
10. Release the button and the update screen will appear.
11. Click on Start to initiate the loading of the firmware. If a dialog box
appears on the screen, select YES for updating and Formatting the unit
(this will delete all the files in the unit) or select NO for updating the unit
without formatting the unit.
12. When the loading is complete, click on CLOSE, and the unit is now fully
functional.
28
SPECIFICATIONS
AUDIO
Frequency Range .......................................................................................20Hz-20KHz
Headphone Output ..........................................................20mW, 16 ohm (max volume)
S/N Ratio .....................................................................................................85dB (MP3)
FILE SUPPORT
File Type...........................................................................MPEG 1/2/2.5 Layer 3, WMA
Bit Rate..................................................................................................8Kbps-320Kbps
Tag Info...............................................................................................................ID3 Tag
FM TUNER
FM Frequency Range ........................................................................87.5MHz-108MHz
Antenna ...............................................................................................Headphone Cord
GENERAL:
Dimensions...............................................................................0.95 x 2.5 x 2.75 inches
Weight ............................................................................................35g (without battery)
Battery ..............................................................................................1 AAA size alkaline
LCD.....................................................................................Full Graphics with Backlight
Language ............................................................................................................English
USB ...................................................................................................................USB 1.1
External Memory..........................................................................................SD or MMC
Built-in Memory....................................................................................................128MB
Maximum Play Time..................................................Approx 10 hours (128Kbps, MP3)
Supported OS....................................................Win ME, Win 2000, Win XP, Mac OSX
Firmware Upgrade..............................................................Yes (except Win 98 or Mac)
Operating Temperature .................................................................................-5° to 40°C
Specifications are subject to change without notice.
29
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE,
PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR
PLACE OF PURCHASE OR TO MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL
AT 1-800-321-6993.
30
|