SUPRA
kitchen
machine
y
ance, this will increase the risk of electric shock.
20. Do not touch the plug with wet hands.
21. Take the necessary measures to avoid starting
the appliance involuntarily.
22. Do not touch any of the appliance’s moving
parts while it is operating.
the manner described in the cleaning section.
• Prepare the appliance according to the function
you wish to use.
Use and care:
1. Fully unroll the appliance’s power cable before
each use.
2. Do not use the appliance if its accessories are
not properly fitted.
3. Do not use the appliance if the accessories
attached to it are defective. Replace them im-
mediately.
4. Do not use the appliance if the on/off switch
does not work.
5. Do not move the appliance while in use.
6. Do not use the appliance if it is tipped up and
do not turn it over.
7. Do not force the appliance’s work capacity.
8. This appliance is for household use only, not
professional or industrial use.
9. This appliance should be stored out of reach of
children and/or the disabled.
10. Do not store the appliance on areas where the
temperature could be lower than 2ºC.
11. Do not expose to extreme temperatures or
strong magnetism.
12. Keep the appliance in a dry, dust-free place, out
of direct sunlight.
13. Make sure that dust, dirt or other foreign objects
do not block the fan grill on the appliance.
14. Keep the appliance in good condition. Check
that the moving parts are not misaligned or
locked and make sure there are no broken
parts or anomalies that may prevent the appli-
ance from operating correctly.
Use:
1. Take the length of cable required out of the
housing.
2. Connect the appliance to the mains.
3. The LED display will light up, displaying 00:00
4. Press gently with your hand on the upper part
while pressing the connect/ disconnect button
to raise the upper part (Fig. 1)
5. Place the bowl on base and position as shown
(Fig. 2)
6. Place the accessory that will be used on the
mounting, ensuring that it fits over the hole
and turn in an anti-clockwise direction until it is
tightly fitted (Fig. 3)
15. Never leave the appliance unattended while in
use.
16. Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
17. Do not use the appliance for more than 10 min-
utes at once. Let it cool for down for a couple of
minutes before using again.
Service:
• Make sure that the appliance is serviced only by
specialist personnel, and that only original spare
parts or accessories are used to replace existing
parts/ accessories.
7. Press the connect/disconnect button and press
the upper part downwards until the button is
returned to its original position (Fig. 4)
8. Put the lid on to prevent splashing.
9. Start the appliance by turning on the speed
regulator.
10. If no specific operating time has been pro-
grammed, the LED display will show the time
that has elapsed since the operating speed
was selected.
11. To avoid a fierce start up of the fan, it is advis-
able to start off from the lowest speed posi-
tion and, once the fan has been switched on,
progressively increase the speed to the desired
position.
• Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer’s liability null and void.
Instructions for use
Before use:
• Make sure that all the product’s packaging has
been removed.
• Before using the product for the first time, clean
the parts that will come into contact with food in
Electronic speed control:
Accessories:
• The speed of the appliance can be regulated by
using the speed regulator control (D). This func-
Whisk accessory (H):
tion is very useful, as it makes it possible to adapt • This accessory is used for whipping cream, stiff-
the power of the appliance to the type of work
that needs to be done.
ening egg whites, making smoothies, light cakes,
meringues, mousses and soufflés.
• Do not use this accessory for mixing heavy
masses (e.g. fat and sugar) as it may damage
the appliance.
• Use the speed control to gradually increase until
reaching the maximum setting.
• Note: minimum quantity of 3 eggs, maximum
quantity of 12.
• The speed control can be used for the desired
function as is described in the accessories sec-
tion.
Timer function:
1. The appliance’s operating time can be con-
trolled.
2. To set an operating time simply select it by us-
ing the time selection buttons (G) to a maxi-
mum of 10 minutes, with 10 second intervals.
By keeping “+” or “-” pressed, the selected
time will change more quickly.
Mixer accessory (I):
• This accessory is used for mixing food, making
biscuits, pasta, fillings and mashed potatoes.
• It is recommended that intermediate speeds are
used from 2-6, depending on the type of mixes.
3. The programmed time or remaining time will be
shown on the LED display (F).
4. By selecting the desired speed the LED display
will show the remaining time in 1 second
intervals.
Kneading accessory (J):
• This accessory is used for kneading bread, pizza
dough and dense cakes.
5. The time and operating of the appliance can
be paused by moving the selector knob to “0”.
Time and operating will resume once the speed
has been selected again.
• Do not use speeds greater than 1.
• Maximum quantity of flour: 1,200 gr.
Safety thermal protector:
6. Once the programmed time has elapsed, the
appliance will stop. Move the selector knob to
“0”.
• The appliance has a safety device, which pro-
tects the appliance from overheating.
• If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
7. To change the set time move the selector knob
to “0” and press “+” or “-” to reset the desired
time. Once selected, reset the desired operat-
ing speed.
8. To reset the timer, select “0” and then press
both select time buttons at the same time until
00:00 is shown on the LED display.
Cleaning
9. If a specific operating time has not been set, the • Disconnect the appliance from the mains and let
LED display will show the time elapsed since
the operating speed was selected.
it cool before undertaking any cleaning task.
• Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
• Do not let water or any other liquid get into the air
vents to avoid damage to the inner parts of the
appliance.
Once you have finished using the appliance:
1. Turn off the appliance by selecting 0 on the
speed regulator.
2. Unplug the appliance to the mains.
3. Put the cable back in the cable housing.
4. The cable housing enables the cable to be
stored and pulled out to the required length for
operating the appliance, preventing hazardous
situations.
• Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
• It is advisable to clean the appliance with a
damp(not wet) cloth regularly and remove any
food remains. The bowl, splash guard, spatula
and attachments are suitable for cleaning with
hot soapy water.
5. Take off the lid.
6. Press the connect/disconnect button of the up-
per part, while raising the upper part.
7. Remove the bowl from the base by turning it in
an anti-clockwise direction.
• After washing, dry all the parts before fitting them
together and storing.
8. Clean the appliance
Anomalies and repair
• - Take the appliance to an authorised technical
support service if problems arise. Do not try to
dismantle or repair without assistance, as this
may be dangerous.
|