Manitowoc Ice Thermostat 7629661 User Manual

7629661 BIN THERMOSTAT  
WATER SHIELD ASSY.  
QM-30 Installation Instructions Only  
IF USED ON A QM-20, REPLACEMENT BRACKET AND SHIELD ARE NOT USED.  
INSTALL BIN THERMOSTAT ONLY.  
1. Remove back panel.  
2. Remove the two screws holding the bin thermostat to the bracket. Drill out the rivets that hold the bracket to the cabinet.  
Remove and discard the bracket.  
3. Drill new 9/64” [3.5mm] diameter holes in the cabinet exterior flange 1.25” [31.75mm] above the existing holes. Attach the  
thermostat to the shield using the M4 x 7 screws supplied. Attach the shield to the cabinet using the 8-32 x .500” screws  
supplied.  
4. Press the shield firmly into the foam. Seal the top, left side, and right seams with RTV.  
5. Locate and drill 3/16” [4.76mm] diameter holes in the lower back panel above the water inlet valve. Install the water inlet  
valve shield using two 10-24 x .500” hex head screws supplied.  
6. Install the back panel.  
Bin Thermostat Shield  
3.875”  
[98.43mm]  
1.375”  
[34.93mm]  
.625”  
[15.88mm]  
Water Inlet Valve Shield  
Manitowoc Ice, Inc.  
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
8012133  
Rev. 07/09/04  
 

Kyocera Scanner KM 3650w User Manual
Land Pride Tiller RTR1274 User Manual
Life Fitness Fitness Electronics Pedometer HeartRate Watch User Manual
Lightolier Indoor Furnishings 1001FDM User Manual
Lincoln Oven 1117 000 A User Manual
Magnadyne Stereo Receiver M3100CD User Manual
Makita Nail Gun BPT351 User Manual
McIntosh Universal Remote UR12 User Manual
Melissa Oven 751 019 User Manual
Metra Electronics Automobile Accessories 99 8218 User Manual