Manitowoc Ice Refrigerator A 1100 User Manual

ICE CUBERS T ICE DISPENSERS T ICE STORAGE BINS  
REACH-IN REFRIGERATORS & FREEZERS  
ISO 9001 Qua lity Sys te m Ce rtifie d  
INSTRUCTIONS FOR REPLACING COMPRESSOR  
IN COMPRESSOR ASSEMBLY 7620443  
230V/ 60 HZ/ 3 PHASE  
A-2200, A-1100, B-1100, C-1100 SERIES MACHINES  
E-1100 SERIES MACHINES WITH BRISTOL  
WITH BRISTOL REPLACEMENT COMPRESSOR  
REPLACEMENT COMPRESSORS  
The Bristol model M13A163**** compressor is set up as a  
direct field replacement for the Tecumseh AH7514A  
compressor. The mounting foot pattern on the Bristol is  
exactly the same as the Tecumseh. To get the tubing to line  
up, the Bristol compressor should be turned 90°. In the case  
of the 1100 series, the compressor terminal box will be back  
against the ice machine’s bulkhead.  
The Bristol model M13A163**** compressor is set up as a  
direct field replacement for the Tecumseh AH7514A  
compressor. The mounting foot pattern on the Bristol is  
exactly the same as the Tecumseh. The Bristol should be  
installed in the machine with the compressor terminal box to  
the front of the machine. The process tube can be easily bent  
into position.  
The Bristol compressor is wired the same as the Tecumseh  
and will take the same nameplate refrigerant charge.  
The A, B, and C vintage machines have 3/4” suction lines; the  
Bristol is set up with 5/8”. A short piece of 5/8” tubing is  
needed to be used as an adapter sleeve. It will fit the  
compressor suction spud and can be slipped inside the 3/4”  
existing tubing. All the other tubes are readily field adaptable.  
The Bristol does use a different start capacitor, run capacitor,  
and start relay. These are supplied with service compressors.  
They must be changed at the time of installation.  
The Bristol compressor is wired the same as the Tecumseh  
and will take the same nameplate refrigerant charge. It is  
important to change the drier whenever opening the  
refrigeration system. Check your Manitowoc Parts Manual  
for correct drier size.  
If this Bristol compressor is replacing a Copeland Compressor, a lead wire conversion kit, 7621883, may be necessary. This is  
available through your local Manitowoc distributor.  
This replacement compressor may be different than the original compressor and/or have slightly different tubing configurations. The  
suction line, discharge line, and/or suction service line at the compressor may need to be rerouted, when making this change-out.  
8003184  
Revised 10/26/95  
MANITOWOC EQUIPMENT WORKS  
Division of The Manitowoc Company, Inc. l 2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 U.S.A.  
( 414-682-0161 l FAX 414-683-7879  
 

KWC Indoor Furnishings K11VB72700A22 User Manual
Lenovo Personal Computer 10102 4773 [C340] User Manual
LevelOne Network Card WPC 0100 User Manual
Life Fitness Home Gym SU50 User Manual
Lightolier Indoor Furnishings 1101HL User Manual
Logitech Webcam 622866 1403 User Manual
Makita Vacuum Cleaner XBV01B User Manual
Manitowoc Ice Ice Maker 7600153 User Manual
Manitowoc Ice Ice Maker K00341 User Manual
Midland Radio Two Way Radio NAUTICO 3 User Manual