Manitowoc Ice Ice Maker J 1800 User Manual

J-1800 COMPRESSOR REPLACEMENT  
Installation Instructions  
Piping:  
Some repiping of refrigerant tubing is required. As you are viewing the ice machine from the front, the replacement  
compressor is mounted with the suction, discharge, and process ports facing the right side. With the existing tubing,  
reposition the discharge and process tube to the ports provided on the new compressor. With the suction tube provided  
with the compressor, insert unswedged end into the suction port, line up to the existing suction line, mark the line, and cut  
to fit. Note: reducer bushings are provided for suction and process ports.  
Wiring:  
The existing compressor and crankcase heater wire leads must be replaced with the wire leads provided. These wires are  
longer and connect to the same terminals (refer to wiring diagram). Note: new run capacitor must be installed on single  
phase compressor.  
Manitowoc Ice, Inc.  
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
8011043  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
08/12/97  
 

Lenovo Laptop Y510 User Manual
Lexmark All in One Printer T522 User Manual
LG Electronics Air Conditioner L Aura Plus User Manual
LG Electronics Microwave Oven MC 808WAR User Manual
LifeSource Crib Toy XL 18 User Manual
Linksys Network Card WPC600N User Manual
Martin Fireplaces Indoor Fireplace B36LA User Manual
McCulloch Lawn Mower EDITION 1 R User Manual
MediSense Blood Glucose Meter 133 224 User Manual
Mellerware Food Processor 26888 User Manual