Manitowoc Ice Air Compressor Q 0600 User Manual

Q-0600 Compressor Replacement  
Installation Instructions  
NOTE: THIS REPLACEMENT IS ONLY FOR THE Q-SERIES MACHINES. NO CHANGES WITH  
START/RUN COMPONENTS ARE NEEDED.  
1. Disconnect power to the ice machine at the electrical  
disconnect (moving the toggle switch to the off  
position will not disconnect line voltage).  
2. Remove panels (top, front, left and right sides).  
3. Recover refrigerant from ice machine.  
8. Remove extra section of suction service valve  
process tube from the ice machine at swedge joint.  
Repeat this procedure with discharge line. Remove  
up to T section.  
4. Remove right side corner post (when facing the front  
of the machine) and back panel.  
T Section  
Swedge Joint  
5. Remove wiring from compressor terminals.  
6. Cut tubing (suction, discharge, and process lines) at  
the compressor ports.  
7. Remove compressor from machine. Make sure to  
crimp and braze shut ports to compressor.  
9. Insert new compressor into the machine as shown.  
Discharge  
Suction  
Process  
Manitowoc Ice, Inc.  
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
8006173  
Sheet 1 of 3  
06/25/01  
 
21. Reinstall all other panels.  
22. Reconnect power and test run ice machine.  
8006173  
Sheet 3 of 3  
06/25/01  
 

KTM Motorcycle 3CF6001F5EN User Manual
KWC Indoor Furnishings 12251042006 User Manual
LG Electronics Cell Phone 245 User Manual
Magic Chef Microwave Oven MCD1110WB User Manual
Magnasonic MP3 Docking Station iP860K User Manual
Makita Trimmer UH4570 User Manual
Maximatic Food Warmer EWM 9933 User Manual
Maytag Clothes Dryer W10312952A User Manual
Melissa Hair Dryer 235 011 User Manual
Melissa Microwave Oven 753 097 User Manual