New Software Version
for FFD 3.5” Ultra Wide SCSI
Product Update, June 2003
Description
Software version 1.32 has been released for the FFD 3.5” Ultra Wide SCSI, which replaces
software version 1.31. Major changes include:
•
•
•
•
Execution of each Sanitize requirement in one command/interrupt
Faster Security Erase and Sanitize procedures
“Strong” Erase (erase operation repeated up to 16 times)
Additional Sanitize procedure based on IRIG-06 requirements
Ordering Information
The ordering information is as follows:
Product
Capacity (MB)
All capacities
Updated Ordering Information
FFD35US-CCCCC-T-Pxx
FFD 3.5” Ultra Wide SCSI
CCCCC: Indicates disk capacity
T: Indicates operating temperature range:
Blank: Commercial 0°C to +70°C
N: Enhanced -25°C to +75°C
X: Extended -40°C to +85°C
Pxx: Indicates the connector number:
P86: 68 pin connector
P80: 80 pin connector
Reason for Change
The additional data security features make FFD 3.5” Ultra Wide SCSI even more secure, and
suitable for a broader range of applications.
Availability
FFD 3.5” Ultra Wide SCSI with software version 1.32 will be shipped from June 2003.
Customers that prefer the previous version for new ordered units should notify M-Systems, and
special ordering information will be provided.
How to Contact Us
Please contact your M-Systems representative or visit the FFD web page on the M-Systems
Business Manager
FFD Business Unit
1
PU-FFD-0303, Rev. 1.0
43-SR-002-07-8L
|