Logitech Universal Remote UR5U 9000L User Manual

STEP4 Press the [CH] button to save the  
power commands you stored. The  
[CBL] button will blink twice to confirm  
the commands have been saved.  
TV  
A. Quick Set-Up Method  
STEP1 Turn on the equipment you want to  
program. To program your TV, turn on  
the TV.  
C. Auto-Search Method  
E. Programming the AUX Device  
I. Programming a ‘Macro’ button.  
6
7
Introduction  
Button Functions  
Quick Set-up Code Tables  
Set-up Code Tables  
1
4
Operating Instructions For  
Manufacturer/Brand  
Set-Up Code Number  
If none of the three digit code numbers  
assigned to your brand of equipment works, or  
the code table does not list your brand, you can  
use the Auto Search Method to find the correct  
three-digit code number for your equipment by  
following steps:  
If your remote model has custom-programmable  
Macro buttons available(See Section 4), they  
can be programmed to act as a 'Macro' or  
Favorite Channel button in CABLE mode. This  
allows you to program up to five 2-digit channels,  
four 3-digit channels or three 4-digit channels  
that can be accessed with one button press.  
You can take advantage of the AUX function to  
program a devices such as a media PC, gaming  
console or satellite radio receiver. Follow the  
instruction in section B to program an AUX  
device. You can also program the AUX button  
for a second TV, DVD or Audio Device. To do  
this follow the instructions below.  
CBL-CABLE Converters  
CBL  
BRADFORD  
BROCKWOOD  
BROKSONIC  
BYDESIGN  
CANDLE  
CAPEHART  
CARY AUDIO DESIGN 266  
CELEBRITY  
CENTURION  
CETRONIC  
CHANGHONG  
CITIZEN  
CLARION  
CLASSIC  
CLP CLASSIC  
COBY  
COLORTYME  
CONCERTO  
CONCIERGE  
CONTEC  
CORNEA  
CORONADO  
CRAIG  
CROSLEY  
CROWN  
043  
116  
238  
The PHAZR-5 UR5U-9000L & UR5U-9020L  
is designed to operate the CISCO / SA,  
Pioneer, Pace Micro, Samsung and  
Motorola digital set tops, Plus the majority  
of TV, AUD, DVD and AUX equipment on  
the market as shown below.  
Quick Number  
Manufacturer/Brand  
Manufacturer/Brand  
CISCO/SA  
PIONEER  
PACE  
SAMSUNG  
MOTOROLA  
CE-LABS  
DIGEO  
EVOLUTION FTA  
GENERAL INSTRUMENT 005 103 104  
HAMLIN  
HITACHI  
JERROLD  
MAGNAVOX  
MEMOREX  
MOXI  
NFUSION  
PANASONIC  
PHILIPS  
PULSAR  
RCA  
REGAL  
REGENCY  
SKY  
SONY  
SPRUCER  
TELNET  
Set-Up Code Number  
001 003 041 042 045 046  
001 103 034 051 063 076 105  
001 005 002  
001 030  
002 111 148  
164  
153  
158  
1
SCIENTIFIC ATLANTA/CISCO, PACE  
SAMSUNG  
MOTOROLA  
PHAZR-5  
STEP2 Point the remote at the component and  
press and hold the [DEVICE] key for 3  
seconds until the Device LED blinks off  
and turns back on. Continue holding  
the [DEVICE] key and press the num-  
ber keys, one at a time, starting with 1,  
then 2, 3...0. Stop pressing the number  
keys when the device turns off.  
031 032  
116 002 003 363  
058  
G. Programming Volume Control  
Volume and Mute control are factory programmed  
to automatically transfer to the respective Device  
mode You select, as follows:  
2
Cable Remote Control  
STEP1 Turn on the equipment that you want  
the remote control to operate (Cable  
Box, TV, DVD, etc.).  
001  
TV  
CBL : Cable Set-top Box  
TV : Televisions  
STEP1 Press the [CBL] button to select the CBL  
116  
Quick Number  
Manufacturer/Brand  
STEP1 Turn on the 5th device you want to  
AUD : Audio Receivers  
DVD : DVD Players  
043  
UR5U-9000L & UR5U-9020L  
mode.  
0
1
2
3
4
5
6
7
8
9
SANYO  
SONY  
SAMSUNG  
LG  
program (TV, AUD, DVD, etc.).  
247  
AUX : Media PC, Gaming System, etc.  
CBL : CBL  
DVD : TV  
T V : TV  
AUX : AUX  
AUD : AUD  
STEP2 Press the [DEVICE] button and the  
[OK/SEL] button simultaneously for  
three seconds. The device LED will  
turn on indicating that it is ready to be  
programmed. The LED will remain on  
for 30 seconds. The next step must be  
entered while the LED is on.  
STEP2 Press the [MACRO] button and  
[OK/SEL] button simultaneously for 3  
seconds. The [CBL] button will turn on  
for 30 seconds.  
116 002 003 363 043 258 103 143  
049 050 055  
103 055  
005 004 103 005 003 008 009 010 069  
010 012  
052  
111 252 153  
192  
044 047  
006 012 013 020 085  
052  
047  
049 050  
057  
230 204  
108  
047  
354  
039 040 056  
052  
STEP2 Press the [AUX] button and the  
[OK/SEL] button simultaneously for 3  
seconds. The [AUX] device LED will  
turn on for 30 seconds.  
043  
Replacing Batteries  
Before you program or operate the remote control,  
you must install two new AA alkaline batteries.  
2
043  
If you wish to store the TV volume control in  
CBL mode, use the following steps.  
STEP3 Release the [DEVICE] key to save the  
code. The Device LED will blink twice  
to confirm the code is stored.  
333  
TOSHIBA  
PANASONIC  
PHILIPS  
HITACHI  
SHARP  
640 641  
116  
STEP1 Press the [OK/SEL] button and [CBL]  
button simultaneously for three  
seconds. The device LED will turn on  
for 30 seconds. The next step must  
be performed while the LED is on.  
STEP3 Enter the the 2, 3 or 4-digit code for the  
channel you want programmed first (for  
example, 007) using the Number Pad,  
then press the [STOP] button. Then  
enter the code for the next channel (for  
example, 050), then press the [STOP]  
button. Repeat this process for the third  
channel. The [CBL] button will blink  
once for each channel entered.  
363  
073  
STEP3 Press the [Device] button For the type  
of device you want to setup. Point the  
remote control toward the device and  
enter the 3-digit code number  
assigned to your brand.  
Repeat the steps above for all components  
(CBL, TV, AUD, DVD, AUX).  
STEP1 Remove the battery compartment cover  
043 050 051  
116  
on the back of your remote control.  
STEP3 Press the [CH] or [CH] button one  
at a time or keep it pressed. The  
remote will emit a series of Power  
ON/OFF code signals. Release the  
[CH+] or [CH-] button as soon as the  
equipment turns off.  
VIZIO  
STEP2 Check battery polarity carefully, and  
install the batteries as shown in the  
illustration below.  
143  
B. Pre-Programmed 3-Dight Code Method  
STEP1 Turn on the equipment that you want  
the remote control to operate (Cable  
Box, TV, DVD, etc.).  
043 054  
164  
043 143  
AUDIO  
Quick Number  
STEP2 Press the [VOL] button. The device  
Manufacturer/Brand  
ROTEL  
DENON  
YAMAHA  
MARANTZ  
SONY  
*Note : To program a second TV press TV, etc.  
LED will blink.  
STEP3 Replace the battery compartment cover.  
CURTIS MATHES 116 258 363 143  
CXC  
CYBERHOME  
DAEWOO  
0
1
2
3
4
5
6
7
8
9
043  
015  
STEP3 Press [TV] button. The device LED will  
STEP4 When the equipment turns off verify  
that you have selected the correct  
code by pressing the [POWER] button.  
The equipment should turn back on.  
Then try all of the functions on the  
remote control (i.e. volume, mute, etc.)  
to ensure you have the correct code.  
If any of the functions do not operate  
as they should, enter the next 3-digit  
code number from the brand list.  
STEP2 Press the [DEVICE] button and the  
[OK/SEL] button simultaneously for  
three seconds. The corresponding  
device LED will turn on indicating that  
it is ready to be programmed. The LED  
will remain on for 30 seconds. The  
next step must be entered while the  
LED is on.  
blink twice to confirm the programming.  
*Note : You can verify that you have selected the  
correct code by pressing the [POWER]  
button. The equipment should turn back  
on. Then try all of the functions on the  
remote control (i.e. volume, mute, etc.) to  
ensure you have the correct code. If any of  
the functions do not operate as they should,  
repeat the instructions from STEP 3 above  
to continue the Auto Search Method.  
STEP4 Press the [CH] button to store the  
channels that were selected. The  
[CBL] button will blink twice to confirm  
the storage of commands.  
363 016 043 044 076 103 114 125 127  
TOCOM  
143  
*Note : To return CBL device to CBL volume  
repeat steps above replacing [TV] with  
[CBL] in Step 3.  
TOSHIBA  
VIEWSTAR  
ZENITH  
DAYTRON  
DELL  
DIGITAL PROJECTION 570  
DIMENSIA  
DREAMVISION  
DUKANE  
DUMONT  
DURABRAND  
DWIN  
DYNASTY  
DYNEX  
EIKI  
ELECTROBAND  
ELECTROGRAPH  
ELECTROHOME  
ELEKTRA  
ELEMENT  
EMERSON  
363 143  
320 164 363 618  
012 015  
052 060 093 100  
INTEGRA  
HARMAN KARDON  
PIONEER  
ONKYO  
333  
235  
To access the programmed channels, press  
the [MACRO] button once. This will bring up  
the first channel. Press once again and it will  
bring up the second channel. Press again and  
it will bring up the third channel.  
TV  
H. Programming Channel Control  
011 025  
Manufacturer/Brand  
Set-Up Code Number  
LEXICON  
116 073  
You can program the channel controls (Channel  
Up, Channel Down, Last and Numbers) from  
one Device to operate in another Device mode.  
Default channel control settings on the remote  
control are as follows:  
A MARK  
ABEX  
ACCURIAN  
ADMIRAL  
ADVENT  
ADVENTURA  
AIKO  
112 143  
025  
036  
072 251 333  
247 388  
002  
103  
116 146 248 404 405 473 475 323 387  
391 615  
017  
096 052  
257  
DVD  
Quick Number  
STEP3 Point the remote control toward the  
equipment and enter the three-digit  
code number assigned to your brand  
from the code tables. If there are more  
than one three-digit number listed for  
your brand, try one code number at a  
time until your equipment turns off.  
043  
STEP4 Press the same [DEVICE] button to  
store the code. The Device LED will  
blink twice to confirm that the code  
has been stored.  
Manufacturer/Brand  
STEP5 Once you have found the correct  
3-digit code, save it by pressing the  
[AUX] button one more time. The [AUX]  
LED light will blink twice to confirm the  
code was stored.  
400  
0
1
2
3
4
5
6
7
8
9
HITACHI  
SONY  
PHILIPS  
187  
J. Low Battery Warning  
001  
466  
When the batteries are low and need to be  
replaced with fresh batteries, the Device LED  
lights will blink 2 times in sequence whenever a  
[POWER] button is pressed to turn on equipment.  
Programming the Remote Control  
IMPORTANT SETUP NOTE!  
In this section when you are instructed to press a [DEVICE] button, that means to press either the CBL, TV,  
AUD, DVD or AUX button, depending on what device you are programming the remote to operate.  
5
CBL : CBL T V : CBL  
AUD : AUD  
143 024 076 196  
AKAI  
SAMSUNG  
PHILIPS MAGNAVOX  
PANASONIC  
LG  
072  
DVD : DVD AUX : AUX  
D. To Identify the 3-Digit Code  
Programmed for a Device  
STEP1 Press the appropriate [DEVICE] button  
and the [OK/SEL] button simultaneously  
for three seconds. The device LED will  
turn on for 30 seconds. The next step  
must be performed while the LED is on.  
363 494 526 622  
ALBATRON  
ALERON  
AMERICA ACTION 043  
AMPRO  
AMSTRAD  
ANAM  
Operations  
3
028 048 043 155 005 116 363 047 050  
If you wish to store the TV channel controls in  
TV mode, use the following steps.  
028  
F. Programming the System On/Off Button  
*Note : You can verify that you have selected the  
correct code by pressing the [POWER]  
button. The equipment should turn back  
on. Then try all of the functions on the  
remote control (i.e. volume, mute, etc.)  
to ensure you have the correct code. If  
any of the functions do not operate as  
they should, repeat the instructions from  
STEP 3 above using the next three digit  
code number from the brand list.  
051 076 096 143 153 154 052 514  
DEFAULT STATE:  
JVC  
ENVISION  
EPSON  
ESA  
FISHER  
FUJITSU  
FUNAI  
FUSION  
FUTURETECH  
GATEWAY  
GE  
116  
073  
052  
K. Memory Lock System  
This remote control is designed to retain pro-  
grammed memory for 10 years even after batteries  
are removed from the remote control.  
This allows you to program the System On/Off  
button so it can send up to five power On/Off  
commands with one button press.  
There are three ways you can program your remote:  
Device Default: Cable Set-Top Box (STB)  
Channel Default: CABLE channel and numbers  
through the CABLE STB. You have the option of  
controlling your CABLE channel and numbers  
through the TV or AUD. Refer to section H for pro-  
gramming steps.  
DENON  
324 590  
STEP1 Press the [OK/SEL] button and [TV] button  
simultaneously for three seconds. The  
device LED will turn on for 30 seconds.  
The next step must be performed while  
the LED is on.  
Quick Set-Up Method  
*
PIONEER  
323  
043 054 056 080 112  
116 363 112 058 616  
572  
006  
573 574  
477  
076 454 388  
052  
627 628  
441  
The Pre-Programmed 3-Digit Code Method  
*
007 057  
AOC  
APEX  
246 198 410  
AUX  
Quick Number  
The Auto-Search Method  
*
STEP1 Press the [CBL] button.  
028 043 052  
APEX DIGITAL  
AQUAVISION  
ASTAR  
AUDIOVOX  
AVENTURA  
AVIELO  
Manufacturer/Brand  
The Quick Set-Up Method is a unique feature that enables the fastest and easiest setup by using a 1 digit code.  
This is the quickest way to set up devices made by popular manufacturers.  
The Pre-Programmed Code Method allows you to setup all of the buttons at once by entering 3-digit code  
numbers that correspond with the components manufacturer/brand. Code tables for this method are on the  
backside of the operating instructions.  
642  
043  
STEP2 Press the [INFO] button. The device LED  
will blink a number of times indicating  
the number of each digit for the code.  
Each digit is separated by a one second  
interval of the LED being off.  
STEP2 Press the [SYSTEM ON/OFF] button  
and the [OK/SEL] button simultaneously  
for 3 seconds. The [CBL] button will turn  
on for 30 seconds.  
0
1
2
3
4
5
6
7
8
9
BOSE  
HP  
APPLE / iPod  
APPLE / iPod  
MICROSOFT / XBOX  
SONY / PS2  
LUTRON  
L. Record Your Component Set-up Codes  
STEP2 Press the [VOL] button. The device  
242 268  
Volume Default: Volume and Mute control are  
automatically transferred to the respective  
Component based on the Device selected:  
073 116 008 009 034 056 074 155 333  
TV  
Set-up Code Number:  
LED will blink.  
363  
391  
AUD Set-up Code Number:  
DVD Set-up Code Number:  
AUX Set-up Code Number:  
GEM  
STEP3 Press [TV] button. The device LED will  
AVION  
AXION  
BELCOR  
BELL&HOWELL  
BENQ  
The Auto-Search Method scans through all of the codes in the remote control, one at a time allowing you to  
identify the correct code.  
IMPORTANT SETUP NOTE!  
This pertains to all programming steps. When you are in setup mode the device LED will light for 30 seconds. If you do  
not press a button within 30 seconds, the LED light will turn off and exit setup mode, and you will need to start over.  
STEP4 Store the three-digit code by pressing  
the same [DEVICE] button once again.  
The device LED will blink twice to  
confirm that the code has been  
stored.  
GIBRALTER  
GO VIDEO  
GOLDSTAR  
GRUNPY  
HAIER  
116 073  
STEP3 Press the first [DEVICE] button you want  
to store in the [SYSTEM ON/OFF] button  
and then press [POWER]. Repeat this for  
the other components you want to turn  
on/off with the [SYSTEM ON/OFF] button.  
CBL:Cable Set-Top Box ; TV:TV ; AUD:AUD.  
DVD:TV ; AUX:AUX. You have the option of  
controlling CABLE Volume and Mute through  
the TV, DVD or AUD. Refer to section G for  
programming steps.  
blink twice to confirm the programming.  
039  
116  
333 072  
423 600  
266  
026  
Example :One blink, (pause) three blinks,  
(pause) eight blinks indicates the  
code number 138.  
113 116 102 363 106 112 127 143  
Universal Remote Control, Inc.  
*Note : To return TV device to CBL channel  
repeat steps above replacing [TV] with  
[CBL] in Step 3.  
X-10  
028 043  
363 501 623  
363  
X-10  
For additional information about your remote  
OCE-0081A Rev 10 (02/14/12)  
BOXLIGHT  
MICROSOFT / XBOX  
HALL MARK  
*Note : Ten blinks indicates the number 0.  
 

Kyocera All in One Printer FS 1800 User Manual
Leica Indoor Furnishings 106 Z User Manual
Lenco Marine Portable DVD Player DVP 722 User Manual
Linksys Network Router BEPSR11 User Manual
Magnavox DVD VCR Combo MDV540VR 17 User Manual
Makita Drill 217D User Manual
Makita Drill 6015DWE User Manual
Melissa Landscape Lighting 677 001 User Manual
Meridian Audio Microcassette Recorder Microcassette Recorder User Manual
Middleby Marshall Oven PS53GS Gas User Manual