Lindy Switch CPU Switch Duo User Manual

CPU Switch Duo  
User Guide  
English  
LINDY No. 32254  
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (Jan 2006)  
 
Keyboard Hot Keys:  
You can select a specific PC or activate the automatic scan mode using the keyboard hotkeys.  
The keyboard hotkeys provide an instant and convenient way to control all your PC’s.  
1.  
2.  
3.  
To select a PC directly using hot-keys:  
Scroll  
Lock  
Scroll  
Lock  
Enter  
PC (1or2)  
(Press 1 for the first PC, 2 for the second)  
To activate automatic scan mode:  
Scroll  
Lock  
Scroll  
Lock  
Space  
Bar  
A long beep will sound to confirm the activation of automatic scan mode. The  
SCAN LED will be lit to indicate the operation of SCAN mode.  
To deactivate automatic scan mode:  
Press any key on the keyboard.  
Select Button:  
1.  
To select a PC using the Select Button:  
Press the SELECT button (and release within one second) to select the next PC.  
The built in buzzer will beep once.  
2.  
3.  
To activate Automatic Scan Mode:  
Press the SELECT button and hold for two seconds.  
To deactivate Automatic Scan Mode:  
Press the SELECT button. The built in buzzer will beep once to confirm the  
deactivation. The SCAN LED will go off.  
4.  
Reset Button:  
Pressing the reset button will automatically reset the KVM switch’s keyboard and  
mouse emulation processor. Do not move the mouse or touch the keyboard  
during the reset process. You will hear a beep to confirm the activation of reset  
process. The reset process will be complete within three seconds.  
 
Radio Frequency Energy, Certifications  
Shielded cables must be used with this equipment to maintain compliance with radio frequency  
energy emission regulations and ensure a suitably high level of immunity to electromagnetic  
disturbances.  
FCC Warning  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following measures:  
ƒ Reorient or relocate the receiving antenna  
ƒ Increase the separation between the equipment and receiver  
ƒ Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected  
ƒ Consult the dealer or an experienced technician for help  
You are cautioned that changes or modification not expressly approved by the party responsible  
for compliance could void your authority to operate the equipment.  
This device complies with part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
1. This device may not cause harmful interference, and  
2. This device must accept any interference received, including interference that may cause  
undesired operation.  
LINDY No. 32254  
2nd Edition January 2006  
 

Krell Industries TV Converter Box STUDIO 2 User Manual
Lexmark Printer 16M1260 User Manual
Lightolier Indoor Furnishings 1001FIC_3d User Manual
Linksys Network Card ADSL2MUE User Manual
LST Network Card BC06 1 User Manual
Makita Power Screwdriver 6826N User Manual
Maxtor DVR Built in Digital Video Recorder User Manual
Mazda Automobile 2006 MPV User Manual
Mellerware Toaster 2 4 1 0 99 5 0 W User Manual
Metra Electronics Car Stereo System 99 3410 User Manual