TIG WELDERS
®
Invertec V205-T AC/DC
Output
For TIG and Stick Welding
The Invertec® V205-T AC/DC is a compact, TIG power source intended
for critical AC or DC TIG welding. From maintenance to production fabri-
cation, to motorsports, aerospace, nuclear piping and shipbuilding, this
feature-packed inverter is flexible enough for almost any job! Variable
AC frequency allows you to focus the arc when precise control is
required. The 115/230V input voltage auto-reconnect makes the V205-T
AC/DC extremely useful almost anywhere in the shop or in the field.
AC
DC
Input
1
PHASE
50
60
Hz
Processes
Stick, TIG
Advantage Lincoln
Precision Arc Performance
•
•
200 amps @ 40% duty cycle is the highest output rating in this
machine class.
•
Added Stick Crisp Mode for exceptional Fleetweld® 5P and 5P+ (E6010)
Performance.
Auto-reconnects for single phase 115/230V 50/60 Hz input allows
the flexibility to weld in the shop or take in the field where 230V
may not be available.
•
•
Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten.
Adjustable DC strike mode – Allows adjustment of a hotter or colder start
depending on the tungsten diameter.
•
Weighs in at a mere 38 lbs. (17.3 kg) making it easy to carry around the
shop or job site.
•
•
•
•
AC/DC inverter for TIG with advanced inverter technology to optimize arc
performance.
Simple Controls
•
Full featured TIG control – up to 11 variable – including pulse, upslope,
downslope and balance control.
Adjustable AC output frequency allows the operator to focus the arc
minimizing the heat affected zone.
•
Easy to read sequence diagram with LEDs displays selected parameter
for easy setting with a single knob.
Extended AC Balance Control helps maintain a pointed tungsten to direct
the arc in the weld joint.
Outstanding Quality
Selectable waveshapes – Square wave for fast travel speeds and
excellent puddle control, sine wave for a traditional softer sounding arc,
triangular wave to reduce the heat input into the weld at low amperages.
•
Fan-As-Needed (F.A.N.) fan only operates when needed to reduce power
consumption, noise and dust in machine.
•
High quality stick welding with such popular Lincoln® electrodes as
•
Newly designed using the latest power electronic technology for
improved reliability.
Fleetweld® 5P, 35, 37, 180 and Excalibur® 7018.
Professional Features
•
•
CSA C/US Certified.
Three-Year Lincoln® Warranty on parts and labor.
•
Voltage Reduction Device (VRD). When enabled from the set up menu
reduces the open circuit voltage in STICK mode for use in electrically
hazardous conditions or when the use of a VRD is required.
TECHNICAL SPECIFICATIONS
Input
Dimensions
H x W x D
inches (mm)
Product
Name
Product
Number
Rated Output
Current/Voltage/Duty Cycle
Current @
Output
Range
Net Weight
lbs.(kg)
Input Power
Rated Output(1)
Invertec®
V205-T AC/DC
150A/16.0V/40% TIG
120A/14.8V/60% TIG
100A/14.0V/100% TIG
200A/18.0V/40% TIG
170A/16.0V/60% TIG
140A/15.6V/100% TIG
110A/24.4V/35% Stick
90A/23.6V/60% Stick
70A/22.8V/100% Stick
180A/27.2V/35% Stick
150A/26.0V/60% Stick
130A/25.2V/100% Stick
34.0A
25.0A
20.0A
30.0A
18.0A
15.0A
34.0A
28.0A
20.0A
30.0A
23.0A
19.0A
K1855-4
115V/1/50/60
230V/1/50/60(2)
115V/1/50/60
6-200 A
AC/DC
Max. OCV:
53.7
15.0 x 8.5 x 19.0
(381 x 216 x 483)
38
(17.3)
230V/1/50/60(2)
(1) Input amps on 60Hz input.
(2) Also operates on 208 input volts.
Publication E3.110 06/07
Web Update 06/08
RECOMMENDED OPTIONS
PTW-20 water-cooled torch may
be connected with an optional
K1622-4 Twist-MateTM adapter.
Order K1784-3 for PTW-20, 12.5 ft.
Order K1622-4 PTW-20 adapter
A full line of TIG torches and parts
kits in various lengths and types
are available.
STICK OPTIONS
Stick Electrode Holder, Work
Clamp, Cable & Twist-Mate™ Set
Includes 200A stick electrode
holder, #4 welding cable, work
cable and Twist-Mate™ set.
Order K2394-1
®
Request Lincoln Publication
E12.150 for more information.
TIG OPTIONS
®
Foot Amptrol
TIG-Mate™ 9 Air-Cooled TIG
Torch Starter Pack
Provides 25 ft. (7.6m) of remote
current control for TIG welding.
(6 pin plug connection)
Order K870
Get everything you need for TIG
welding in one complete easy-to-
order kit packaged in its own
portable carrying case. Includes:
PTA-9 Ultra-FlexTM torch, gas lens
parts kit, Harris® flowmeter/regula-
tor, Twist-MateTM adapter, gas hose,
work clamp and cable.
Hand Amptrol
Provides 25 ft. (7.6m) of remote
current control for TIG welding.
(6 pin plug connection).
Velcro straps secure torch.
Order K963-3 (one size fits all
Pro-Torch TIG torches).
Order K2413-1
TIG-Mate™ 17 Air-Cooled
TIG Torch Starter Pack
Arc Start Switch
Get everything you need for TIG
welding in one complete easy-to-
order kit packaged in its own
portable carrying case. Includes:
PTA-17 Ultra-FlexTM torch, parts
kit, Harris® flowmeter/regulator, 10
ft. gas hose, PTA-17 Twist-MateTM
adapter, and work clamp and
10 ft. cable.
May be used in place of the Foot
or Hand Amptrol. Comes with a 25
ft. (7.6m) cable and 6-pin plug
connector. Attaches to the TIG
torch for convenient finger control
to start and stop the weld cycle at
the current set on the machine.
Order K814
Order K2266-1
Cool-Arc™ 40 Water Cooler
Energy efficient long life cooler for
water-cooled welding applications.
Order K1813-1 for 115V.
TIG-Mate™ 20 Water-Cooled
TIG Torch Starter Pack
Get everything you need for TIG
welding in one complete easy-to-
order kit packaged in its own
portable carrying case. Includes:
PTW-20 torch, parts kit, Harris
flowmeter/regulator, 10 ft. gas
hose, PTW-20 Twist-MateTM
adapter, work clamp and cable
and 10 ft. water hose.
Water Cooler Hoses
(CGA to CGA)
For 5/8" LH CGA fitting applica-
tions at both cooler and wire
feeder. Kit contains two 25 ft.
hoses with 5/8" left hand CGA
fittings on both ends of hose.
Order K1859-2
Order K2267-1
Hose Coupler (11N18)
Additional or alternate torches
may be ordered:
5/8" LH CGA female fitting on
both ends allows a water hose
from cooler to connect directly to
the water line of the TIG torch.
Order S19558-6
Pro-Torch™ TIG Torches
One-piece air-cooled PTA-9 or -17
TIG torches may be connected
directly with the included K1622-1
TIG Torch Adapter.
Order K1781-1 for PTA-9,
12.5 ft., 1-cable.
Cut Length Consumables
TIG welding filler metals are
available for welding stainless
steel, mild steel, aluminum and
copper alloys.
Order K1782-1 for PTA-17,
12.5 ft., 1-cable.
®
Request Lincoln Publication
C9.10 for more information
One-piece air-cooled PTA-26
TIG torches may be connected
with an optional K1622-3
Twist-Mate™ adapter.
Order K1783-1 for PTA-26,
12.5 ft., 1-cable.
GENERAL OPTIONS
Small Canvas Cover
Protect your machine when not in
use. Made from attractive red can-
vas that is flame retardant, mildew
resistant and water repellent.
Includes a convenient side pocket
to hold welding torch or gun.
Order K2377-1
Order K1622-3 PTA-26 adapter
Invertec® V205-T AC/DC
[3]
RECOMMENDED OPTIONS
GENERAL OPTIONS, CONT.
Welding Cart
Utililty Cart
Lightweight cart stores and trans-
ports welder, 80 cubic foot shield-
ing gas cylinder, welding cables
and accessories. Includes an
angled top shelf for easy access
to welder controls, a lower tray for
added storage space, a sturdy
handle and a convenient cable
wrap hanger.
Heavy duty cart stores and trans-
ports welder, 150 cubic foot
shielding gas cylinder, welding
cables and accessories. Includes
stable platforms for welder and
gas bottle platform, lower tray for
added storage capacity and
adjustable height handle.
Order K520
Order K2275-1
®
INVERTEC V205-T AC/DC
PRODUCT DESCRIPTION
ORDER NUMBER
QUANTITY
PRICE
®
Invertec V205-T AC/DC 115/230/1/50/60
K1855-4
K2350-2
®
®
Invertec V205-T AC/DC One-Pak Package
Recommended Stick Options
Stick Electrode Holder, Work Clamp, Cable & Twist-Mate™ Set
K2394-1
Recommended TIG Options
TIG-Mate™ 9 Air-Cooled TIG Torch Starter Pack
TIG-Mate™ 17 Air-Cooled TIG Torch Starter Pack
TIG-Mate™ 20 Water-Cooled TIG Torch Starter Pack
Pro-Torch™ TIG Torches:
PTA-9 TIG Torch, 12.5 ft., 1-cable, 125 amps
PTA-17 TIG Torch, 12.5 ft., 1-cable, 150 amps
TIG Torch Adapter (required for PTA-9, -17)
PTA-26 TIG Torch, 12.5 ft., 1-cable, 200 amps
TIG Torch Adapter (required for PTA-26)
PTW-20 TIG Torch, 12.5 ft., 250 amps
TIG Torch Adapter (required for PTW-20)
Foot Amptrol
K2413-1
K2266-1
K2267-1
see publication E12.150
K1781-1
K1782-1
K1622-1
K1783-1
K1622-3
K1784-3
K1622-4
K870
Hand Amptrol
K963-3
Arc Start Switch
K814
Cool Arc™ 40 Water Cooler:
115/1/50/60
K1813-1
220-240/1/50/60
K2187-1
Water Cooler Hoses (CGA to CGA)
Hose Coupler (11N18)
K1859-2
S19558-6
Cut Length Consumables
see publication C9.10
Recommended General Options
Small Canvas Cover
Welding Cart
K2377-1
K2275-1
K520
Utility Cart
TOTAL:
C U S T O M E R A S S I S T A N C E P O L I C Y
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the
needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond
to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability,
with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to
such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has
been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsible manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility
of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
THE LINCOLN ELECTRIC COMPANY
|