662101 GLUTE/SQUAT OPTION
ASSEMBLY INSTRUCTIONS
Part # 7046901
Rev B
1
Revision: 07/31/01
PARTS LIST
KEY PART #
DESCRIPTION
FOOT PLATE
SQUAT BAR
QTY
KEY PART #
DESCRIPTION
NON-SKID STRIP
1/2 X 3-1/4” BOLT
1/2” LOCK NUT
QTY
1
2
3
4
6748802
6748702
6740002
6016401
1
1
1
2
5
6
7
6670701
3102918
3102801
1
2
2
GLUTE KICK
ROLLER PAD
1
7
PRESS
BASE
6 1/2 X 3-1/4”
FIGURE 1
STEP 1
• Swing the PRESS SEAT over 90° to install FOOT PLATE (1). See FIGURE 1.
• SECURELY attach the FOOT PLATE (1) to the PRESS BASE using two 1/2 X 3-1/4” BOLTS (6) and two 1/2” LOCK NUTS (7) as
shown in FIGURE 1.
1/2
1/2
1/2
1/2
1/2
1/2
0
1
2
3
4
5
6
3
PRESS
ARM
2
4
FIGURE 2
STEP 2
• Slide two ROLLER PADS (4) over the SQUAT BAR (2). See FIGURE 2. Space PADS out equally to support back of neck.
(Optional : SQUAT BAR may be used without ROLLER PADS.)
• Insert SQUAT BAR (4) into the hole on the PRESS ARM as shown.
PRESS
ARM
2
FIGURE 3
STEP 3
• Insert other end of SQUAT BAR (2) into the PRESS ARM. See FIGURE 3.
• Rotate SQUAT BAR (2) 90° to hold SQUAT BAR (2) in PRESS ARM. See FIGURE 3.
4
PRESS
ARM
3
5
FIGURE 4
STEP 4
• Attach one NON-SKID STRIP (5) to the GLUTE KICK (3) as shown in FIGURE 4.
• Insert GLUTE KICK(3) into the hole on the PRESS ARM as shown.
PRESS
ARM
3
FIGURE 5
STEP 5
• Rotate GLUTE KICK (3) 90° to hold GLUTE KICK (3) in PRESS ARM. See FIGURE 5.
Thank you for purchasing the PARABODY662101 GLUTE/SQUAT OPTION. If unsure of proper use of
equipment refer to the 662101 OPERATION GUIDE or call your local PARABODYdistributor or call the
PARABODY customer service department at (800) 328-9714.
5
|