Liebert® SiteTPI-1™
Product Specification/Installation Sheet
The Liebert SiteTPI-1 is an ARCnet-ready device intended to
®
interface specifically with a Liebert SiteScan Web system.
It is a 32-bit microprocessor-based device designed to monitor
third-party equipment via an EIA-485/232 interface.
Logically, the device sits on the ARCnet network, providing
the interface to Liebert SiteScan Web. The Liebert SiteTPI-1
converts proprietary equipment data into open protocol data,
enabling a single piece of equipment to reside on a BACnet or
Modbus network where it can be monitored or controlled by a
Critical Management System.
Screw terminal blocks are provided to terminate power,
communication and input signal wiring.
Module Dimensions and Layout
4.1" (104.14mm)
0.2"
(5.08mm)
2.05"
(52.07mm)
Port 2
5.2"
(132.08mm)
LED Indicators
4.8"
(121.92mm)
Addressing
Rotary
Switches
0.2" (5.08mm)
1
|