Lexmark Printer Z2300 User Manual

Z2300 Series User's Guide  
2008  
 
Contents  
3
 
4
 
Safety information  
Use only the power supply and power supply cord provided with this product or the manufacturer's authorized  
replacement power supply and power supply cord.  
Connect the power supply cord to an electrical outlet that is near the product and easily accessible.  
CAUTION—POTENTIAL INJURY: Do not twist, bind, crush, or place heavy objects on the power cord. Do not  
subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture  
and walls. If the power cord is misused, a risk of fire or electrical shock results. Inspect the power cord regularly  
for signs of misuse. Remove the power cord from the electrical outlet before inspecting it.  
Refer service or repairs, other than those described in the user documentation, to a professional service person.  
This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark  
components. The safety features of some parts may not always be obvious. Lexmark is not responsible for the use of  
other replacement parts.  
CAUTION—SHOCK HAZARD: Do not set up this product or make any electrical or cabling connections, such  
as the power supply cord or telephone, during a lightning storm.  
SAVE THESE INSTRUCTIONS.  
5
 
   
Introduction  
Finding information about the printer  
Publications  
See the  
For  
Quick Setup sheet  
Printed Getting Started guide  
Initial setup instructions that came with the printer.  
Additional setup instructions that came with the printer.  
Note: Not all products come with printed publications.  
Electronic User's Guide  
Complete instructions for using the printer. The electronic version installs  
automatically with the printer software.  
Customer support  
Description  
Where to find (North America)  
Call us at  
Where to find (rest of world)  
Telephone numbers and support hours vary  
by country or region.  
Telephone support  
US: 1-800-332-4120  
Visit our Web site at www.lexmark.com.  
Select a country or region, and then select the  
Customer Support link.  
Monday–Friday (8:00 AM–11:00 PM  
EST), Saturday (Noon–6:00 PM EST)  
Canada: 1-800-539-6275  
Note: For additional information about  
contactingLexmark, see the printed warranty  
that came with your printer.  
Support in English: Monday–Friday  
(8:00 AM–11:00 PM EST), Saturday  
(Noon–6:00 PM EST)  
Support in French: Monday–Friday  
(9:00 AM–7:00 PM EST)  
Mexico: 01-800-253-9627  
Monday–Friday(8:00AM–8:00PMEST)  
Note: Support numbers and times may  
change without notice. For the most recent  
telephone numbers available, see the printed  
warranty statement that came with your  
printer.  
6
 
     
Description  
Where to find (North America)  
Where to find (rest of world)  
For e-mail support, visit our Web site:  
E-mail support varies by country or region,  
and may not be available in some instances.  
E-mail support  
Visit our Web site at www.lexmark.com.  
Select a country or region, and then select the  
Customer Support link.  
1 Click CUSTOMER SUPPORT.  
2 Click Technical Support.  
3 Select your printer family.  
4 Select your printer model.  
Note: For additional information about  
contactingLexmark, see the printed warranty  
that came with your printer.  
5 From the Support Tools section, click e-  
Mail Support.  
6 Complete the form, and then click  
Submit Request.  
Limited Warranty  
Description  
Where to find (USA)  
Where to find (rest of world)  
Limited Warranty Information  
To view the limitations and conditions of Warranty information varies by  
this limited warranty, see the Statement of country or region. See the printed  
Lexmark International, Inc.  
Limited Warranty included with this  
printer, or set forth at  
warranty that came with your  
printer.  
furnishes a limited warranty that  
this printer will be free of defects in  
materials and workmanship for a  
period of 12 months after the  
original date of purchase.  
1 Click CUSTOMER SUPPORT.  
2 Click Warranty Information.  
3 From the Statement of Limited  
Warranty section, click Inkjet &  
All-In-One Printers.  
4 Scroll through the Web page to view  
the warranty.  
Record the following information (located on the store receipt and the back of the printer), and have it ready when  
you contact customer support so that they may serve you faster:  
Machine Type number  
Serial number  
Date purchased  
Store where purchased  
7
 
Setting up the printer  
Bypassing security warnings during software installation  
Third-party applications, including antivirus, security, and firewall programs may alert you about the printer software  
being installed. For your printer to work properly, allow the printer software to be installed on your computer.  
Understanding the parts of the printer  
6
5
4
1
2
3
Use the  
To  
Install or change the print cartridges.  
Access cover  
1
2
Clear paper jams.  
Turn the printer on and off.  
Cancel a print job. Press in the middle of a print job.  
Load or eject paper.  
Paper exit tray  
Stack paper as it exits.  
3
4
5
6
Paper feed guard Prevent items from falling into the paper slot.  
Paper guide  
Keep paper straight when feeding.  
Load paper.  
Paper support  
8
 
                 
1
2
Use the  
To  
1
2
USB port  
Connect the printer to a computer using a USB cable.  
Warning—Potential Damage: Do not touch the USB port except when plugging in or  
removing a USB cable or installation cable.  
Power supply Connect the printer to a power source using the power cord.  
1 Plug the power cord all the way into the power supply on the printer.  
2 Plug the power cord into an electrical outlet that other electrical devices have been  
using.  
2
1
3 If the light is not on, press  
.
Understanding the parts of the printer  
Installing printer software  
Using Windows  
1 Close all open software programs.  
2 Insert the printer software CD.  
3 From the main installation screen, click Install.  
4 Follow the instructions on the screens.  
9
 
         
Using Macintosh  
1 Close all open software applications.  
2 Insert the printer software CD.  
3 From the Finder desktop, double-click the printer CD icon that automatically appears.  
4 Double-click the Install icon.  
5 Follow the instructions on the screens.  
Using the World Wide Web  
1 Go to the Lexmark Web site at www.lexmark.com.  
2 From the home page, navigate through the menu selection, and then click Drivers & Downloads.  
3 Choose the printer and the printer driver for your operating system.  
4 Follow the instructions on the screens to download the driver and install the printer software.  
Installing the optional XPS driver (Windows Vista users only)  
The XML Paper Specification (XPS) driver is an optional printer driver designed to make use of the advanced XPS  
color and graphics features that are available only for Windows Vista users. To use XPS features, you must install the  
XPS driver as an additional driver after you install the regular printer software.  
Notes:  
Before installing the XPS driver, you must install the printer on your computer.  
Before installing the XPS driver, you must install the Microsoft QFE Patch and then extract the driver files from  
the installation software CD. To install the patch, you must have administrator privileges on the computer.  
To install the Microsoft QFE Patch and extract the driver:  
1 Insert the installation software CD, and then click Cancel when the Setup Wizard appears.  
2 Click Œ Computer.  
3 Double-click the CD or DVD drive icon, and then double-click Drivers.  
4 Double-click xps, and then double-click the setupxps file.  
XPS driver files are copied to your computer, and any required Microsoft XPS files are launched. Follow the  
instructions on the screen to finish installing the patch.  
To install the XPS driver:  
1 Click Œ Control Panel.  
2 Under Hardware and Sound, click Printer, and then click Add a Printer.  
3 From the Add Printer dialog, click Add a local printer.  
4 From the “Use an existing port” drop-down menu, select Virtual printer port for USB, and then click Next.  
5 Click Have disk.  
The Install From Disk dialog appears.  
10  
 
   
6 Click Browse, and then navigate to the XPS driver files on your computer:  
a Click Computer, and then double-click (C:).  
b Double-click Drivers, and then double-click Printer.  
c Double-click the folder that has your printer model number, and then double-click Drivers.  
d Double-click xps, and then click Open.  
e From the Install From Disk dialog, click OK.  
7 Click Next on the two additional dialogs that appear.  
For more information on the XPS driver, see the XPS readme file on the installation software CD. The file is located  
in the xps folder with the setupxps batch file (D:\Drivers\xps\readme).  
Using the Windows printer software  
When you set up the printer using the printer software CD, all the necessary software was installed. You may have  
chosen to install some additional programs. The following table provides an overview of various software programs  
and what they can help you do.  
Note: Not all of these programs are available on all printers. For example, if you purchased a printer that does not  
scan or fax items, then the printer software will not support these functions.  
Use the  
To  
Scan, copy, fax, e-mail, or print a photo or document.  
Transfer photos.  
LexmarkTM Productivity Studio or  
Lexmark FastPics  
Make photo greeting cards.  
Adjust settings for the printer.  
Lexmark Fax Solutions Software  
Send a fax.  
Receive a fax  
Add, edit, or delete contacts in the built-in phone book.  
Access the Lexmark Fax Setup Utility. Use the Lexmark Fax Setup Utility  
to set the Speed Dial and Group Dial numbers, set Ringing and  
Answering, and print fax history and status reports.  
Printing Preferences  
When you select File ŒPrint with a document open, a Printing Preferences  
dialog appears. The dialog lets you select options for the print job such as  
the following:  
Select the number of copies to be printed.  
Print two-sided copies.  
Select the paper type.  
Add a watermark.  
Enhance images.  
Save settings.  
Lexmark Wireless Setup Utility  
Set up the wireless printer on a wireless network.  
Change the wireless settings of the printer.  
11  
 
   
Using the Macintosh printer software  
Use the  
To  
Print dialog  
Adjust the print settings and schedule print jobs.  
Printer Services dialog  
Access the printer utility.  
Troubleshoot.  
Order ink or supplies.  
Contact Lexmark.  
Check the printer software version installed on the computer.  
Applications are also installed with the printer software during installation. These applications are saved in the printer  
folder that appears on the Finder desktop after installation.  
1 From the Finder desktop, double-click the printer folder.  
2 Double-click the icon of the application that you want to use.  
Use the  
To  
Scan photos and documents.  
Lexmark All-In-One Center  
Customize settings for scan jobs.  
Lexmark Fax Setup Utility  
Customize settings for fax jobs.  
Create and edit the Speed Dial list.  
Lexmark Network Card Reader  
View the contents of a memory device inserted into a network printer.  
Transferphotos and documentsfroma memorydevice to the computerover  
a network.  
Lexmark Printer Utility  
Get help with cartridge installation.  
Print a test page.  
Print an alignment page.  
Clean the print cartridge nozzles.  
Order ink or supplies.  
Register the printer.  
Contact customer support.  
Lexmark Wireless Setup Assistant Set up the printer on a wireless network.  
Note: Your printer may not come with these applications, depending on the features of the printer that you  
purchased.  
12  
 
 
Loading paper  
Loading paper  
1 Make sure:  
You use paper designed for inkjet printers.  
The paper is not used or damaged.  
If you are using specialty paper, you follow the instructions that came with it.  
You do not force paper into the printer.  
2 Load the paper vertically against the right side of the paper support.  
3 Adjust the paper guide until it rests against the left edge of the paper.  
Note: To avoid paper jams, make sure the paper does not buckle when you adjust the paper guide.  
Loading various paper types  
Plain paper  
Load up to 100 sheets of plain paper (depending on the thickness).  
Make sure:  
The paper is designed for use with inkjet printers.  
The paper is loaded against the right side of the paper support.  
The paper guide rests against the left edge of the paper.  
The total thickness of paper does not exceed 10 mm (0.4 inches).  
Glossy and photo paper  
Load up to 25 sheets of glossy or photo paper.  
Make sure:  
The glossy or printable side of the paper faces you. (If you are not sure which side is the printable side, see the  
instructions that came with the paper.)  
The paper is loaded against the right side of the paper support.  
The paper guide rests against the left edge of the paper.  
Note: Photos require more drying time. Remove each photo as it exits, and allow it to dry to avoid ink smudging.  
13  
 
         
Iron-on transfers  
Load up to 10 iron-on transfers.  
Make sure:  
You follow the loading instructions that came with the iron-on transfers.  
The print side of the transfers faces you.  
The transfers are loaded against the right side of the paper support.  
The paper guide rests against the left edge of the transfers.  
Note: For best results, load transfers one at a time.  
Cards  
Load up to 25 greeting cards, index cards, photo cards, or postcards.  
Make sure:  
The total thickness of the card stack does not exceed 10 mm (0.4 inches).  
The print side of the cards faces you.  
The cards are loaded against the right side of the paper support.  
The paper guide rests against the left edge of the cards.  
Envelopes  
Load up to 10 envelopes.  
Make sure:  
The stamp location is in the upper left corner.  
The print side of the envelopes faces you.  
The envelopes are loaded against the right side of the paper support.  
The paper guide rests against the left edge of the envelopes.  
Warning—Potential Damage: Do not use envelopes that have metal clasps, string ties, or metal folding bars.  
Notes:  
Do not load envelopes with holes, perforations, cutouts, or deep embossing.  
Do not use envelopes that have exposed flap adhesive.  
Labels  
Load up to 25 sheets of labels.  
14  
 
       
Make sure:  
You follow the loading instructions that came with the labels.  
The print side of the labels faces you.  
The adhesive on the labels does not extend to within 1 mm of the edge of the label.  
You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during  
printing, resulting in a paper jam.  
The labels are loaded against the right side of the paper support.  
The paper guide rests against the left edge of the labels.  
Transparencies  
Load up to 10 transparencies.  
Make sure:  
The rough side of the transparencies faces you.  
You don't use transparencies with paper backing sheets.  
The transparencies are loaded against the right side of the paper support.  
The paper guide rests against the left edge of the transparencies.  
Note: Transparencies require more drying time. Remove each transparency as it exits, and allow it to dry to avoid ink  
smudging.  
Custom-size paper  
Load up to 100 sheets of custom-size paper (depending on the thickness).  
Make sure:  
The total thickness of paper does not exceed 10 mm (0.4 inches).  
The print side of the paper faces you.  
The paper size fits within these dimensions:  
Width:  
76–216 mm  
3.0–8.5 inches  
Length:  
127–432 mm  
5.0–17.0 inches  
The paper is loaded against the right side of the paper support.  
The paper guide rests against the left edge of the paper.  
15  
 
   
Printing  
Printing basic documents  
Printing a document  
1 Load the paper.  
1
2
2 Do one of the following to print:  
Using Windows  
a With a document open in a Windows program , click File Œ Print.  
b Click Properties, Preferences, Options, or Setup.  
c Select the print quality, the number of copies to print, the type of paper to be used, and how the pages should  
print.  
d Click OK to close any printer software dialogs.  
e Click OK or Print.  
Using Macintosh  
a With a document open in a Macintosh application, click File Œ Print.  
b From the Printer pop-up menu, choose the printer.  
c From the print options pop-up menu, choose the print quality, the number of copies to print, the type of  
paper to be used, and how the pages should print.  
d Click Print.  
Printing Web pages  
If you chose to install the Lexmark Toolbar software for your Web browser, then you can use it to create a  
printer-friendly version of any Web page.  
Notes:  
For Windows, the software supports Microsoft Internet Explorer 5.5 or later or a compatible version of Firefox.  
For Macintosh, the software supports a compatible version of Firefox.  
16  
 
         
1 Load paper.  
2 Open a Web page using a supported browser.  
3 Select a print option to print the page.  
You can also adjust settings or preview the page before printing.  
Printing multiple copies of a document  
Using Windows  
1 With a document open, click File Œ Print.  
2 Click Properties, Preferences, Options, or Setup.  
3 From the Copies section of the Print Setup tab, enter the number of copies that you want to print.  
4 Click OK to close any printer software dialogs.  
5 Click OK or Print.  
Using Macintosh  
1 With a document open, click File Œ Print.  
2 From the Printer pop-up menu, choose the printer.  
3 In the Copies field, enter the number of copies that you want to print.  
4 Click Print.  
Collating printed copies  
If you print multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies  
as groups of pages (not collated).  
Collated  
Not collated  
Using Windows  
1 With a document open, click File Œ Print.  
2 Click Properties, Preferences, Options, or Setup.  
3 From the Copies section of the Print Setup tab, enter the number of copies that you want to print, and then select  
Collate Copies.  
4 Click OK to close any printer software dialogs.  
5 Click OK or Print.  
Note: The collate option is available only when you are printing multiple copies.  
17  
 
       
Using Macintosh  
1 With a document open, click File Œ Print.  
2 In the Copies field, enter the number of copies that you want to print, and then select Collated.  
3 Click Print.  
Note: To prevent smudging when printing photos, remove each photo as it exits the printer, and then let it dry before  
stacking.  
Printing the last page first (reverse page order)  
Using Windows  
1 With a document open, click File Œ Print.  
2 Click Properties, Preferences, Options, or Setup.  
3 From the Copies section of the Print Setup tab, select Print Last Page First.  
4 Click OK to close any printer software dialogs.  
5 Click OK or Print.  
Using Macintosh  
1 With a document open, click File Œ Print.  
2 From the Printer pop-up menu, choose the printer.  
3 Do one of the following:  
For Mac OS X version 10.5  
a From the print options pop-up menu, choose Layout.  
b Select Reverse Page Orientation.  
For Mac OS X version 10.4  
a From the print options pop-up menu, choose Paper Handling.  
b From the Page Order menu, select Reverse.  
For Mac OS X version 10.3  
a From the print options pop-up menu, choose Paper Handling.  
b Select Reverse page order.  
4 Click Print.  
Printing multiple pages on one sheet (N-Up)  
Using Windows  
1 With a document open, click File Œ Print.  
2 Click Properties, Preferences, Options, or Setup.  
18  
 
       
3 From the Advanced tab, select N-Up under the Layout drop-down menu.  
4 Select the number of page images to print on each page.  
If you want each page image to be surrounded by a border, then select Print Page Borders.  
5 Click OK to close any printer software dialogs.  
6 Click OK or Print.  
Using Macintosh  
1 With a document open, click File Œ Print.  
2 From the print options pop-up menu, choose Layout.  
From the Pages per Sheet pop-up menu, choose the number of page images that you want to print on one  
sheet.  
From the Layout Direction area, click the icon that shows the order that you want the page images to print  
on one sheet.  
If you want to print a border around each page image, then choose an option from the Border pop-up menu.  
3 Click Print.  
Canceling print jobs  
Using the printer control panel  
Press  
.
Using the printing status window of the printer  
The printing status window automatically opens at the bottom-right part of your screen when you send a print job.  
Click Cancel Printing to cancel the print job.  
Using the printer folder in Windows  
1 Do one of the following:  
In Windows Vista  
a Click  
.
b Click Control Panel.  
c Under Hardware and Sound, click Printer.  
In Windows XP  
a Click Start.  
b Click Printers and Faxes.  
In Windows 2000  
a Click Start.  
b Click Settings Œ Printers.  
2 Right-click the printer name, and then select Open.  
19  
 
   
3 Do one of the following:  
If you want to cancel a particular print job, right-click the document name, and then select Cancel.  
If you want to cancel all print jobs in the queue, click Printer Œ Cancel All Documents.  
Using the taskbar in Windows  
1 Double-click the printer icon in the taskbar.  
2 Do one of the following:  
If you want to cancel a particular print job, right-click the document name, and then select Cancel.  
If you want to cancel all print jobs in the queue, click Printer Œ Cancel All Documents.  
Using Macintosh  
1 While the document is printing, click the printer icon in the Dock.  
2 From the print queue dialog, choose the job that you want to cancel, and then click Delete.  
Pausing print jobs  
Using the printer folder in Windows  
1 Do one of the following:  
In Windows Vista  
a Click  
.
b Click Control Panel.  
c Under Hardware and Sound, click Printer.  
In Windows XP  
a Click Start.  
b Click Printers and Faxes.  
In Windows 2000  
a Click Start.  
b Click Settings Œ Printers.  
2 Right-click the printer, and then select Pause Printing.  
Using the taskbar in Windows  
1 Double-click the printer icon in the taskbar.  
2 Right-click the document name, and then select Pause.  
20  
 
 
Using Macintosh  
1 While the document is printing, click the printer icon in the Dock.  
The print queue dialog appears.  
2 Do one of the following:  
If you want to pause a particular print job, choose the document name, and then click Hold.  
If you want to pause all print jobs in the queue, click Pause Printer or Stop Jobs, depending on the operating  
system version that you are using.  
Printing specialty documents  
Choosing compatible specialty paper types  
Heavyweight matte paper—A photo paper with a matte finish used for printing high-quality graphics.  
Photo/Glossy paper—Photo paper with a special coating. It is used specifically for printing photos with crisp,  
sharp images.  
Lexmark Photo Paper—An outstanding "everyday" heavyweight inkjet photo paper designed for use with  
Lexmark printers, but compatible with all brands of inkjet printers. Although inexpensive, it offers excellent image  
quality and outstanding value.  
Lexmark Premium Photo Paper—A high-gloss, heavyweight quality photo paper specifically designed to work  
withLexmark'severcolorTM inksforeye-catching, color-richresults. Itisgreatforthosespecialphotostobeframed,  
placed in an album, or shared with friends and family.  
Lexmark PerfectFinishTM Photo Paper—A high-quality photo paper specifically designed for Lexmark inkjet  
printers, but compatible with all inkjet printers. It is used specifically for printing professional quality photos with  
a glossy finish. It is best when used with genuine Lexmark evercolor 2 ink, providing photos that are fade- and  
water-resistant.  
Transparency—A clear, plastic media primarily used for overhead projectors.  
Card stock—A very thick paper used for printing sturdier items, such as greeting cards.  
Iron-On transfer—A type of media that has a reverse image printed on it that can be ironed onto fabric.  
Printing envelopes  
1 Load the envelopes in the printer.  
2 Do one of the following:  
Using Windows  
a With a document open, click File Œ Print.  
b Click Properties, Preferences, Options, or Setup.  
c From the Media Type list of the Print Setup tab, select Plain.  
21  
 
         
d From the Paper Size list, select the envelope size.  
Note: To print on a custom-size envelope, select Custom Size, and then specify the height and width of the  
envelope.  
e Select Portrait or Landscape orientation.  
f
Click OK to close any printer software dialogs.  
g Click OK or Print.  
Using Macintosh  
a Customize the settings as needed in the Page Setup dialog.  
1 With a document open, click File Œ Page Setup.  
2 From the “Format for” pop-up menu, choose the envelope size. If no size matches the size of the envelope,  
then set a custom size.  
3 Select an orientation.  
4 Click OK.  
b Customize the settings as needed in the Print dialog.  
1 With a document open, click File Œ Print.  
2 From the Printer pop-up menu, choose the printer that you want to use.  
3 Click Print.  
Notes:  
Most envelopes use landscape orientation.  
Make sure the same orientation is also selected in the software application.  
Printing labels  
1 Load the label sheets in the printer.  
2 Do one of the following:  
Using Windows  
a With a document open, click File Œ Print.  
b Click Properties, Preferences, Options, or Setup.  
c From the Paper Size drop-down menu of the Print Setup tab, choose a paper size that matches the size of the  
label sheet. If no paper size matches the label sheet size, then set a custom size.  
If necessary, choose the appropriate type of media from the Media Type drop-down menu.  
d Click OK to close any printer software dialogs.  
e Click OK or Print.  
Using Macintosh  
a Customize the settings as needed in the Page Setup dialog.  
1 With a document open, choose File Œ Page Setup.  
2 From the “Format for” pop-up menu, choose the printer that you want to use.  
3 From the Paper Size pop-up menu, choose a paper size that matches the size of the label sheet. If no paper  
size matches the label sheet size, then create a custom size.  
22  
 
   
b Customize the settings as needed in the Print dialog.  
1 With a document open, click File Œ Print.  
2 From the Printer pop-up menu, choose the printer that you want to use.  
3 From the print options pop-up menu, choose Quality & Media.  
4 From the Paper type pop-up menu, choose a paper type.  
5 From the Print Quality menu, choose a print quality other than Quick Print.  
Tips on loading label sheets  
Make sure the top of the label sheet feeds into the printer first.  
Make sure the adhesive on the labels does not extend to within 1 mm of the edge of the label sheet.  
Make sure the paper guide or paper guides rest against the edges of the label sheet.  
Use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during  
printing, resulting in a paper jam.  
Note: Labels require more drying time. Remove each label sheet as it exits, and then allow it to dry to avoid ink  
smudging.  
Printing on custom-size paper  
Before beginningtheseinstructions, loadthecustom-sizepaperintheprinter. Formoreinformation, seetheLoading  
Paper” chapter.  
Using Windows  
1 With a document open, click File Œ Print.  
2 Click Properties, Preferences, Options, or Setup.  
The Print Setup tab appears.  
3 In the Paper Options section, from the “Paper size” list, select Custom Size.  
The Define Custom Paper Size dialog appears.  
4 Select the measurement units to use (inches or millimeters).  
5 Click OK to close any printer software dialogs that are open.  
6 Print the document.  
Using Macintosh  
1 With a document open, click File Œ Page Setup.  
2 From the Paper size pop-up menu, choose Manage Custom Sizes.  
3 Create a custom size.  
a Click +.  
b In the Page Size menu, type the Width and Height of the paper.  
c From the Printer Margins pop-up menu, choose the printer that you want to use. The margins are set by the  
printer.  
If you want to set the margins, choose User defined, and then type the margins in the Printer Margins area.  
23  
 
   
d From the custom sizes list on the left of the dialog, double-click Untitled, and then type a name for the custom  
paper size you set.  
e Click OK.  
4 Open the Paper size pop-up menu again, and then choose the name of the custom paper size you added in Step  
3d.  
5 Click Print.  
Printing other specialty documents  
When you installed the printer driver, some printer software was installed that may help you print specialty  
documents such as booklets, posters, iron-on transfers, transparencies, and banners. For information about printing  
these documents, see the Help installed with the programs or applications you choose to use.  
Using Windows  
1 Do one of the following:  
In Windows Vista, click  
Œ All Programs, and then select the printer program folder from the list.  
In Windows XP, click Start Œ Programs or All Programs, and then select the printer program folder from  
the list.  
2 Click the program that you want to use.  
Using Macintosh  
1 From the Finder desktop, double-click the printer folder.  
If the printer folder is not found on the desktop:  
a Go to the Mac OS X drive where the printer software was installed.  
b Choose Library Œ Printers Œ YYYY Œ Lexmark, and then select your printer model.  
YYYY is the year that the printer was released.  
2 Double-click the application that you want to use.  
Saving and deleting print settings  
Using Windows  
1 With a document open, click File Œ Print.  
2 Click Properties, Preferences, Options, or Setup.  
3 Make adjustments to the settings.  
4 Click Profiles, and then click Save your current settings.  
5 Select an empty location for your setting, and then assign a name.  
Note: The first location contains Factory Default Settings, which cannot be changed or deleted.  
6 Click Save.  
7 Close all open software dialogs.  
24  
 
       
Notes:  
To retrieve your print settings, click Profiles Œ Restore a Profile, and then select the name of the profile that  
you want to use.  
To delete a setting, click Profiles Œ Delete Profiles. Select the setting that you want to delete, and then click  
Delete.  
Using Macintosh  
The Presets pop-up menu lets you save the print settings you use often. When print settings are saved into a Preset,  
there is no need to adjust the print settings for every print job.  
1 With a document open, click File Œ Print.  
2 From the print options pop-up menu, choose and adjust the settings.  
3 From the Presets pop-up menu, choose Save As.  
The Save Preset dialog appears.  
4 Type a name for the Preset.  
5 Click OK.  
25  
 
Working with photos  
Using recommended paper  
Forbestresultswhenprintingphotosorotherhigh-qualityimages,useLexmarkPhotoPaperorLexmarkPerfectFinish  
Photo Paper.  
Printing photos  
Printing photos from a CD or removable storage device connected  
to the computer  
Using Windows  
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,  
see the instructions that came with the paper.)  
2 Insert a CD or any removable storage device (such as a flash drive, memory card, or digital camera) into the  
computer.  
If you install Lexmark FastPics or Lexmark Productivity Studio, then the software will launch when you insert the  
flash drive, memory card, or digital camera.  
3 Follow the instructions on the computer screen to print photos.  
4 Remove the CD or storage device.  
Using Macintosh  
1 Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,  
see the instructions that came with the paper.)  
2 Insert a CD or any removable storage device (such as a flash drive, memory card, or digital camera) into the  
computer.  
3 Customize the settings as needed in the Page Setup dialog.  
a With a photo open, choose File Œ Page Setup.  
b From the “Format for” pop-up menu, choose your printer series.  
c From the Paper Size pop-up menu, choose the paper size loaded.  
d Choose an orientation.  
e Click OK.  
4 Customize the settings as needed in the Print dialog.  
a With a photo open, choose File Œ Print.  
b From the “Format for” pop-up menu, choose your printer series.  
c For Mac OS X version 10.4 or later, click Advanced. Otherwise, proceed to the next step.  
d From the Copies & Pages pop-up menu, type the number of copies to be printed.  
26  
 
         
e From the same pop-up menu, choose Quality & Media.  
From the Paper Type pop-up menu, choose the type of paper you are using.  
From the Print Quality area, choose Automatic or Photo.  
f
Click Print.  
5 Remove the CD or storage device.  
27  
 
Maintaining the printer  
Maintaining print cartridges  
Installing print cartridges  
1 Open the access cover, and then press down on the cartridge carrier levers.  
2 Remove the used print cartridge or cartridges.  
3 If you are installing new print cartridges, remove the tape from the back and bottom of the black cartridge, insert  
the cartridge in the left carrier, and then close the black cartridge carrier lid.  
Warning—Potential Damage: Do not touch the gold contact area on the back or the metal nozzles on the  
bottom of the cartridge.  
4 Remove the tape from the back and bottom of the color cartridge, insert the cartridge in the right carrier, and  
then close the color cartridge carrier lid.  
Warning—Potential Damage: Do not touch the gold contact area on the back or the metal nozzles on the  
bottom of the cartridge.  
28  
 
     
5 Close the access cover.  
Note: The printer must be closed to start a new print job.  
Removing a used print cartridge  
1 Make sure the printer is on.  
2 Lift the access cover.  
The print cartridge carrier moves and stops at the loading position, unless the printer is busy.  
3 Press down on the cartridge carrier lever to raise the cartridge carrier lid.  
29  
 
   
4 Remove the used print cartridge.  
Refilling print cartridges  
The warranty does not cover repair of failures or damage caused by a refilled cartridge. Lexmark does not recommend  
use of a refilled cartridge. Refilling a cartridge can affect print quality and may cause damage to the printer. For best  
results, use Lexmark supplies.  
Using genuine Lexmark print cartridges  
Lexmark printers, print cartridges, and photo paper are designed to perform together for superior print quality.  
If you receive an Out of Original Lexmark Inkmessage, the original Lexmark ink in the indicated cartridge  
(s) has been depleted.  
If you believe you purchased a new, genuine Lexmark print cartridge, but the Out of Original Lexmark  
Inkmessage appears:  
1 Click Learn More on the message.  
2 Click Report a non-Lexmark print cartridge.  
To prevent the message from appearing again for the indicated cartridge(s):  
Replace your cartridge(s) with new Lexmark print cartridge(s).  
If you are printing from a computer, click Learn more on the message, select the check box, and then click  
Close.  
If you are using the printer without a computer, press Cancel.  
Lexmark's warranty does not cover damage caused by non-Lexmark ink or print cartridges.  
Aligning the print cartridges  
Using Windows  
1 Load plain paper.  
2 Click Start Œ Programs or All Programs, and then click the printer folder.  
3 From the printer folder, click Maintenance Œ Align cartridges.  
4 Click Print.  
5 Follow the instructions on the computer screen.  
6 If you aligned the cartridges to improve print quality, print your document again. If print quality has not improved,  
clean the print cartridge nozzles.  
30  
 
       
Using Macintosh  
1 Load plain paper.  
2 From the Finder desktop, double-click the printer folder.  
3 Double-click the printer utility icon.  
4 From the Maintenance tab, click Print Alignment Page.  
5 Follow the instructions on the computer screen.  
6 If you aligned the cartridges to improve print quality, print your document again. If print quality has not improved,  
clean the print cartridge nozzles.  
Cleaning the print cartridge nozzles  
Using Windows  
1 Load plain paper.  
2 Click Start Œ Programs or All Programs, and then click the printer folder.  
3 From the printer folder, click Maintenance Œ Clean cartridges.  
4 Click Print.  
5 Follow the instructions on the computer screen.  
6 If print quality has not improved, then wipe the print cartridge nozzles and contacts.  
Using Macintosh  
1 Load plain paper.  
2 From the Finder desktop, double click the printer folder.  
3 Double-click the printer utility icon.  
4 From the Maintenance tab, click Clean Print Nozzles.  
A page prints, forcing ink through the print cartridge nozzles to clean them.  
5 To test if the print quality has improved, print the document again.  
6 If print quality has not improved, then try cleaning the nozzles up to two more times.  
Wiping the print cartridge nozzles and contacts  
1 Remove the print cartridge(s).  
2 Dampen a clean, lint-free cloth with water, and then place the cloth on a flat surface.  
31  
 
   
3 Gently hold the nozzles against the cloth for about three seconds, and then wipe in the direction shown.  
4 Using another clean section of the cloth, gently hold the cloth against the contacts for about three seconds, and  
then wipe in the direction shown.  
5 With another clean section of the cloth, repeat step 3 and step 4, and then let the nozzles and contacts dry  
completely.  
6 Reinsert the print cartridge(s), and then print the document again.  
7 If the print quality does not improve, clean the print nozzles, and then try printing the document again.  
8 Repeat step 7 up to two more times.  
9 If print quality is still not satisfactory, replace the print cartridge(s).  
Preserving the print cartridges  
Keep new cartridges in their packaging until you are ready to install them.  
Do not remove a cartridge from the printer except to replace, clean, or store it in an airtight container. The  
cartridges do not print correctly if left exposed for an extended period of time.  
32  
 
   
Cleaning the exterior of the printer  
1 Make sure that the printer is turned off and unplugged from the wall outlet.  
CAUTION—SHOCK HAZARD:To avoid the risk of electric shock, unplug the power cord from the wall outlet  
and disconnect all cables to the printer before proceeding.  
2 Remove paper from the paper support and paper exit tray.  
3 Dampen a clean, lint-free cloth with water.  
Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of  
the printer.  
4 Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper  
exit tray.  
Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer.  
5 Make sure the paper support and paper exit tray are dry before beginning a new print job.  
Ordering supplies  
Ordering print cartridges  
Lexmark Z2300 Series models (except Lexmark Z2390)  
Average cartridge standard page yield 1  
Item  
Part number  
Black cartridge  
Black cartridge2  
Color cartridge  
Color cartridge2  
Photo cartridge  
14A  
14  
For page yield values, refer to  
15A  
15  
31  
Not applicable  
1Values obtained by continuous printing. Declared yield value in accordance with ISO/IEC 24711  
2Licensed Return Program Cartridge  
Lexmark Z2390 model  
Average cartridge standard page yield 1  
Item  
Part number  
Black cartridge  
Black cartridge2  
Color cartridge  
Color cartridge2  
Photo cartridge  
4A  
4
For page yield values, refer to  
5A  
5
31  
Not applicable  
1 Values obtained by continuous printing. Declared yield value in accordance with ISO/IEC 24711  
2 Licensed Return Program Cartridge  
33  
 
       
Ordering paper and other supplies  
To purchase supplies or to locate a dealer near you, visit our Web site at www.lexmark.com.  
Forbestresultswhenprintingphotosorotherhigh-qualityimages,useLexmarkPhotoPaperorLexmarkPerfectFinish  
Photo Paper and Lexmark print cartridges.  
Item  
Description  
Lexmark Photo Paper  
Letter  
A4  
4 x 6 in.  
10 x 15 cm  
Lexmark PerfectFinish Photo Paper  
Letter  
A4  
4 x 6 in.  
10 x 15 cm  
L  
USB cable  
Part number 1021294  
34  
 
 
Troubleshooting  
Using the printer troubleshooting software (Windows  
only)  
The Lexmark Service Center provides step-by-step troubleshooting help and contains links to printer maintenance  
tasks and customer support.  
To open the Lexmark Service Center, use one of these methods:  
Method 1  
Method 2  
If it appears on an error message dialog, click the For  
additional assistance, use the Lexmark Service  
Center link.  
1 Do one of the following:  
In Windows Vista, click ŒAll Programs, and then  
select the printer program folder from the list.  
In Windows XP, click Start Œ Programs or All  
Programs, and then select the printer program  
folder from the list.  
2 Select Lexmark Service Center.  
Setup troubleshooting  
Power button is not lit  
These are possible solutions. Try one or more of the following:  
PRESS POWER BUTTON  
Make sure the printer is on by pressing  
.
DISCONNECT AND RECONNECT THE POWER CORD  
1 Press to turn the printer off.  
2 Disconnect the power cord from the wall outlet.  
3 Disconnect the power cord from the power supply.  
4 Plug the power cord all the way into the power supply on the printer.  
2
1
35  
 
       
5 Plug the power cord into the wall outlet.  
6 Press to turn the printer on.  
Software did not install  
If you encountered problems while installing, or if your printer does not appear in the list in the Printers folder or as  
a printer option when sending a print job, you can try uninstalling and reinstalling the software.  
These are some other possible solutions. Try one or more of the following:  
MAKE SURE YOUR OPERATING SYSTEM IS SUPPORTED  
The following operating systems are supported: Windows Vista, Windows XP, Windows 2000 with Service Pack 3  
or later, and Mac OS X versions 10.5, 10.4 and 10.3.  
CHECK THAT YOUR COMPUTER MEETS THE MINIMUM SYSTEM REQUIREMENTS LISTED ON THE  
PRINTER BOX  
CHECK THE USB CONNECTION  
1 Check the USB cable for any obvious damage. If the cable is damaged, use a new one.  
2 Firmly plug the square end of the USB cable into the back of the printer.  
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.  
The USB port is marked with the  
USB symbol.  
RECONNECT THE POWER SUPPLY  
1 Press to turn the printer off.  
2 Disconnect the power cord from the wall outlet.  
3 Gently remove the power supply from the printer.  
4 Reconnect the power supply to the printer.  
5 Plug the power cord into the wall outlet.  
6 Press to turn the printer on.  
TEMPORARILY DISABLE SECURITY PROGRAMS IN WINDOWS  
1 Close all open programs.  
2 Disable any security programs.  
3 Do one of the following:  
In Windows Vista, click  
.
In Windows XP and earlier, click Start.  
4 Click Computer or My Computer.  
5 Double-click the CD or DVD drive icon.  
36  
 
   
6 If necessary, double-click setup.exe.  
7 Follow the instructions on the computer screen to install the software.  
8 When the installation is completed, enable the security software again.  
Page does not print  
These are possible solutions. Try one or more of the following:  
CHECK MESSAGES  
If an error message appears, then resolve the error before trying to print again.  
CHECK POWER  
If the light is not on, then make sure that the power cord is properly connected to the printer and plugged into  
a known working electrical outlet that other electrical devices have been using.  
REMOVE AND THEN RELOAD PAPER  
CHECK INK  
Check the ink levels, and then install new print cartridges if necessary.  
CHECK CARTRIDGES  
1 Remove the print cartridges.  
2 Make sure the sticker and tape have been removed.  
1
2
3 Reinsert the cartridges.  
CHECK PRINTER DEFAULT AND PAUSE SETTINGS  
Using Windows  
1 Do one of the following:  
In Windows Vista  
a Click  
.
b Click Control Panel.  
c Under Hardware and Sound, click Printer.  
In Windows XP  
a Click Start.  
b Click Printers and Faxes.  
37  
 
   
In Windows 2000  
a Click Start.  
b Click Settings Œ Printers.  
2 Double-click the printer.  
3 Click Printer.  
Make sure no check mark appears next to Pause Printing.  
If a check mark does not appear next to Set As Default Printer, then you must select the printer for each file  
that you want to print.  
Using Macintosh  
For Mac OS X version 10.5  
1 From the Finder desktop, click Œ System Preferences Œ Print & Fax.  
2 From the Default Printer pop-up menu, check if the printer is the default printer.  
If the printer is not the default printer, then you must select the printer for each file that you want to print.  
If you want to set the printer as the default printer, then select the printer from the Default Printer pop-up  
menu.  
3 Click Open Print Queue.  
The print queue dialog appears.  
Make sure that the print job is not on hold. If the print job is on hold:  
If you want to resume a particular print job, choose the document name, and then click Resume.  
If you want to resume all print jobs in the queue, then click Resume Printer.  
For Mac OS X version 10.4 and earlier  
1 From the Finder desktop, click Go Œ Utilities Œ Print Center or Printer Setup Utility.  
The Printer List dialog appears.  
2 Double-click the printer.  
The print queue dialog appears.  
Make sure that the print job is not on hold.  
If the print job is on hold:  
If you want to resume a particular print job, choose the document name, and then click Resume.  
If you want to resume all print jobs in the queue, then click Start Jobs.  
If the printer is not in bold, then it is not the default printer. You must select the printer for each file that  
you want to print.  
If you want to set the printer as the default printer:  
a Go back to the Printer List dialog, and then select the printer.  
b Click Make Default.  
38  
 
DISCONNECT AND RECONNECT POWER SUPPLY  
1 Press to turn off the printer.  
2 Disconnect the power cord from the wall outlet.  
3 Remove the power supply from the printer.  
4 Reconnect the power supply to the printer.  
5 Plug the power cord into the wall outlet.  
6 Press to turn on the printer.  
REMOVE AND REINSTALL THE SOFTWARE  
If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer  
option when sending a print job, then try uninstalling and reinstalling the software.  
Removing and reinstalling the software  
If the printer is not functioning properly, or if a communications error message appears when you try to use the  
printer, you may need to remove and reinstall the printer software.  
Using Windows  
1 Do one of the following:  
In Windows Vista, click  
.
In Windows XP, click Start.  
2 Click Programs or All Programs, and then select the printer program folder from the list.  
3 Select Uninstall.  
4 Follow the instructions on the computer screen to remove the printer software.  
5 Restart the computer before reinstalling the printer software.  
6 Click Cancel on all New Hardware Found screens.  
7 Insert the installation CD, and then follow the instructions on the computer screen to reinstall the software.  
If the install screen does not appear automatically after you restart your computer, do one of the following:  
In Windows Vista:  
a Click  
.
b Locate the Start Search box.  
c Type D:\setup.exe, where D is the letter of your CD or DVD drive.  
In Windows XP:  
a Click Start Œ Run.  
b Type D:\setup.exe, where D is the letter of your CD or DVD drive.  
39  
 
 
Using Macintosh  
1 Close all open software applications.  
2 From the Finder desktop, double-click the printer folder.  
3 Double-click the Uninstaller icon.  
4 Follow the instructions on the computer screen to remove the printer software.  
5 Restart the computer before reinstalling the printer software.  
6 Insert the installation CD, and then follow the instructions on the computer screen to reinstall the software.  
If the software still does not install correctly, visit our Web site at www.lexmark.com to check for the latest software.  
1 In all countries or regions except the United States, select your country or region.  
2 Click the links for drivers or downloads.  
3 Select your printer family.  
4 Select your printer model.  
5 Select your operating system.  
6 Select the file that you want to download, and then follow the directions on the computer screen.  
Enabling the USB port in Windows  
To confirm that the USB port is enabled on the computer:  
1 Do one of the following:  
In Windows Vista  
a Click  
Œ Control Panel.  
b Click System and Maintenance Œ System.  
c Click Device Manager.  
In Windows XP  
a Click Start.  
b Click Control Panel Œ Performance and Maintenance Œ System.  
c From the Hardware tab, click Device Manager.  
In Windows 2000  
a Click Start.  
b Click Settings Œ Control Panel Œ System.  
c From the Hardware tab, click Device Manager.  
2 Click the plus sign (+) beside Universal Serial Bus Controller.  
If USB Host Controller and USB Root Hub are listed, then the USB port is enabled.  
For more information, see the computer documentation.  
40  
 
 
Solving printer communication problems  
The printer and the computer cannot exchange data.  
ESTABLISH BIDIRECTIONAL COMMUNICATION BETWEEN THE PRINTER AND THE COMPUTER  
1 Press to turn the printer off.  
2 Disconnect the power cord from the wall outlet.  
3 Remove the power supply from the printer.  
4 Reconnect the power supply to the printer.  
5 Plug the power cord into the wall outlet.  
6 Press to turn the printer on.  
41  
 
 
Notices  
Product information  
Product name:  
Lexmark Z2300 Series  
Machine type:  
4119  
Model(s):  
001  
Edition notice  
January 2008  
The following paragraph does not apply to any country where such provisions are inconsistent with local  
law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND,  
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in  
certain transactions; therefore, this statement may not apply to you.  
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the  
information herein; these changes will be incorporated in later editions. Improvements or changes in the products  
or the programs described may be made at any time.  
References in this publication to products, programs, or services do not imply that the manufacturer intends to make  
these available in all countries in which it operates. Any reference to a product, program, or service is not intended  
to state or imply that only that product, program, or service may be used. Any functionally equivalent product,  
program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation  
and verification of operation in conjunction with other products, programs, or services, except those expressly  
designated by the manufacturer, are the user’s responsibility.  
For Lexmark technical support, visit support.lexmark.com.  
For information on supplies and downloads, visit www.lexmark.com.  
If you don't have access to the Internet, you can contact Lexmark by mail:  
Lexmark International, Inc.  
Bldg 004-2/CSC  
740 New Circle Road NW  
Lexington, KY 40550  
USA  
© 2008 Lexmark International, Inc.  
All rights reserved.  
42  
 
     
UNITED STATES GOVERNMENT RIGHTS  
This software and any accompanying documentation provided under this agreement are commercial computer  
software and documentation developed exclusively at private expense.  
Trademarks  
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United  
States and/or other countries.  
evercolor and PerfectFinish are trademarks of Lexmark International, Inc.  
All other trademarks are the property of their respective owners.  
Licensing notices  
The following document can be viewed from the \Drivers\XPS directory on the installation software CD: Zopen.PDF.  
Federal Communications Commission (FCC) compliance information  
statement  
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of  
theFCC Rules. Operation issubject tothe followingtwo conditions:(1)thisdevice maynotcauseharmfulinterference,  
and (2) this device must accept any interference received, including interference that may cause undesired operation.  
The FCC Class B limits are designed to provide reasonable protection against harmful interference when the  
equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult your point of purchase or service representative for additional suggestions.  
The manufacturer is not responsible for radio or television interference caused by using other than recommended  
cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could  
void the user's authority to operate this equipment.  
Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing device,  
use a properly shielded and grounded cable such as Lexmark part number 1021294 for USB attach. Use of a substitute  
cable not properly shielded and grounded may result in a violation of FCC regulations.  
Any questions regarding this compliance information statement should be directed to:  
Director of Lexmark Technology & Services  
Lexmark International, Inc.  
740 West New Circle Road  
Lexington, KY 40550  
(859) 232–3000  
43  
 
 
Exposure to radio frequency radiation  
The following notice is applicable if your printer has a wireless network card installed.  
The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other  
regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any  
persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.  
Industry Canada compliance statement  
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Standard  
ICES-003.  
Avis de conformité aux normes de l’industrie du Canada  
Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux équipements  
pouvant causer des interférences NMB-003.  
Industry Canada notice  
The following notices are applicable if your printer has a wireless network card installed.  
Industry Canada (Canada)  
ThisdevicecomplieswithIndustryCanadaspecificationRSS-210. Operationissubjecttothefollowingtwoconditions:  
(1) this device may not cause interference, and (2) this device must accept any interference, including interference  
that may cause undesired operation of the device.  
This device has been designed to operate only with the antenna provided. Use of any other antenna is strictly  
prohibited per regulations of Industry Canada.  
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from  
windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to  
licensing.  
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit  
RF fields in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health  
The term "IC:" before the certification/registration number only signifies that the Industry Canada technical  
specifications were met.  
Industry Canada (Canada)  
Cet appareil est conforme à lanorme RSS-210d'IndustryCanada. Sonfonctionnement estsoumisauxdeuxconditions  
suivantes :  
(1) cet appareil ne doit pas provoquer d'interférences et (2) il doit accepter toute interférence reçue, y compris celles  
risquant d'altérer son fonctionnement.  
Cet appareil a été conçu pour fonctionner uniquement avec l'antenne fournie. L'utilisation de toute autre antenne  
est strictement interdite par la réglementation d'Industry Canada.  
44  
 
 
En application des réglementations d'Industry Canada, l'utilisation d'une antenne de gain supérieur est strictement  
interdite.  
Pourempêcher toute interférenceradioau service faisant l'objetd'unelicence, cetappareildoitêtreutiliséàl'intérieur  
et loin des fenêtres afin de garantir une protection optimale.  
Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.  
L'installateur de cet équipement radio doit veiller à ce que l'antenne soit implantée et dirigée de manière à n'émettre  
aucun champ HF dépassant les limites fixées pour l'ensemble de la population par Santé Canada. Reportez-vous au  
Le terme « IC » précédant le numéro de d'accréditation/inscription signifie simplement que le produit est conforme  
aux spécifications techniques d'Industry Canada.  
European Community (EC) directives conformity  
This product is in conformity with the protection requirements of EC Council directives 2004/108/EC and 2006/95/EC  
on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility  
and safety of electrical equipment designed for use within certain voltage limits.  
A declaration of conformity with the requirements of the directives has been signed by the Director of Manufacturing  
and Technical Support, Lexmark International, Inc., S.A., Boigny, France.  
This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.  
European EC directives conformity statement for radio products  
The following notices are applicable if your printer has a wireless network card installed  
This product is in conformity with the protection requirements of EC Council directives 2004/108/EC, 2006/95/EC,  
and1999/5/EContheapproximationandharmonizationofthelawsoftheMemberStatesrelatingtoelectromagnetic  
compatibility, safety of electrical equipment designed for use within certain voltage limits and on radio equipment  
and telecommunications terminal equipment.  
Compliance is indicated by the CE marking.  
The Alert sign indicates that there are restrictions within certain member states.  
A declaration of conformity with the requirements of the directives is available from the Director of Manufacturing  
and Technical Support, Lexmark International, S. A., Boigny, France.  
The following restrictions apply:  
Country/region  
Restriction  
All countries/regions This product is for indoor use only. This product may not be used outdoors.  
L'Italia  
Si fa presente inoltre che l'uso degli apparati in esame è regolamentato da:  
D.Lgs 1.8.2003, n.259, articoli 104 (attività soggette ad autorizzazione generale) e 105  
(libero uso), per uso privato;  
D.M. 28.5.03, per la fornitura al pubblico dell'accesso R-LAN alle reti e ai servizi di  
telecomunicazioni.  
45  
 
   
This product satisfies the limits of EN 55022; safety requirements of EN 60950; radio spectrum requirements of ETSI  
EN 300 328; and the EMC requirements of EN 55024, ETSI EN 301 489-1 and ETSI EN 301 489-17.  
Česky  
Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se  
základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.  
Dansk  
Deutsch  
Lexmark International, Inc. erklærer herved, at dette produkt overholder de væsentlige krav og øvrige  
relevante krav i direktiv 1999/5/EF.  
Hiermit erklärt Lexmark International, Inc., dass sich das Gerät dieses Gerät in Übereinstimmung mit  
den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie  
1999/5/EG befindet.  
Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Η LEXMARK INTERNATIONAL, INC. ΔΗΛΩΝΕΙ ΟΤΙ ΑΥΤΟ ΤΟ ΠΡΟΪΟΝ  
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ  
ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.  
English  
Hereby, Lexmark International, Inc., declares that this type of equipment is in compliance with  
the essential requirements and other relevant provisions of Directive 1999/5/EC.  
Español  
Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los  
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva  
1999/5/CE.  
Eesti  
Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi  
1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele.  
Suomi  
Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten  
vaatimusten ja muiden sitä koskevien direktiivin ehtojen mukainen.  
Français  
Magyar  
Íslenska  
Italiano  
Latviski  
Lietuvių  
Malti  
Par la présente, Lexmark International, Inc. déclare que l'appareil ce produit est conforme aux  
exigences fondamentales et autres dispositions pertinentes de la directive 1999/5/CE.  
Alulírott, Lexmark International, Inc. nyilatkozom, hogy a termék megfelel a vonatkozó alapvetõ  
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.  
Hér með lýsir Lexmark International, Inc. yfir því að þessi vara er í samræmi við grunnkröfur og  
aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.  
Con la presente Lexmark International, Inc. dichiara che questo questo prodotto è conforme ai requisiti  
essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.  
Ar šo Lexmark International, Inc. deklarē, ka šis izstrādājums atbilst Direktīvas 1999/5/EK  
būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.  
Šiuo Lexmark International, Inc. deklaruoja, kad šis produktas atitinka esminius reikalavimus ir  
kitas 1999/5/EB direktyvos nuostatas.  
Bil-preżenti, Lexmark International, Inc., jiddikjara li dan il-prodott huwa konformi mal-ħtiġijiet  
essenzjali u ma dispożizzjonijiet oħrajn relevanti li jinsabu fid-Direttiva 1999/5/KE.  
Nederlands Hierbij verklaart Lexmark International, Inc. dat het toestel dit product in overeenstemming is met de  
essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.  
Norsk  
Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende  
krav og øvrige relevante krav i direktiv 1999/5/EF.  
Polski  
Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z  
zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy  
1999/5/EC.  
46  
 
 
Português A Lexmark International Inc. declara que este este produto está conforme com os requisitos essenciais  
e outras disposições da Diretiva 1999/5/CE.  
Slovensky Lexmark International, Inc. týmto vyhlasuje, že tento produkt spĺňa základné požiadavky a  
všetky príslušné ustanovenia smernice 1999/5/ES.  
Slovensko Lexmark International, Inc. izjavlja, da je ta izdelek v skladu z bistvenimi zahtevami in ostalimi  
relevantnimi določili direktive 1999/5/ES.  
Svenska  
Härmed intygar Lexmark International, Inc. att denna produkt står i överensstämmelse med de  
väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.  
Noise emission levels  
The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.  
Note: Some modes may not apply to your product.  
1-meter average sound pressure, dBA  
Printing  
Ready  
53  
inaudible  
Values are subject to change. See www.lexmark.com for current values.  
Waste from Electrical and Electronic Equipment (WEEE) directive  
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the  
European Union. We encourage the recycling of our products. If you have further questions about recycling options,  
visit the Lexmark Web site at www.lexmark.com for your local sales office phone number.  
Product disposal  
Donotdisposeoftheprinterorsuppliesinthesamemannerasnormalhouseholdwaste.Consultyourlocalauthorities  
for disposal and recycling options.  
Temperature information  
Ambient temperature  
Shipping temperature  
Storage temperature  
15–32° C (60–90° F)  
-40–60° C (-40–140° F)  
1–60° C (34–140° F)  
47  
 
   
Power consumption  
Product power consumption  
The following table documents the power consumption characteristics of the product.  
Note: Some modes may not apply to your product.  
Mode  
Description  
Power consumption (Watts)  
Printing  
Copying  
The product is generating hard-copy output from electronic inputs. 13  
The product is generating hard-copy output from hard-copy original not applicable  
documents.  
Scanning  
Ready  
The product is scanning hard-copy documents.  
The product is waiting for a print job.  
not applicable  
2
Power Saver The product is in energy-saving mode.  
not applicable  
2
Off The product is plugged into a wall outlet, but the power switch is  
turned off.  
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous  
power draws may be substantially higher than the average.  
Values are subject to change. See www.lexmark.com for current values.  
Power Saver  
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to  
the EPA Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods  
of inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of  
time, called the Power Saver Timeout.  
Factory default Power Saver Timeout for this product (in minutes):  
not applicable  
Off mode  
If this product has an off mode which still consumes a small amount of power, then to completely stop product power  
consumption, disconnect the power supply cord from the wall outlet.  
Total energy usage  
It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided  
in power units of Watts, the power consumption should be multiplied by the time the product spends in each mode  
in order to calculate energy usage. The total product energy usage is the sum of each mode's energy usage.  
48  
 
   
LEXMARK LICENSE AGREEMENTS  
PLEASE READ CAREFULLY: BY USING THIS PRODUCT, YOU AGREE TO BE BOUND BY ALL THE TERMS AND CONDITIONS  
OF THESE LICENSE AGREEMENTS. IF YOU DO NOT AGREE WITH THE TERMS OF THESE LICENSE AGREEMENTS,  
PROMPTLY RETURN THE PRODUCT UNUSED AND REQUEST A REFUND OF THE AMOUNT YOU PAID. IF YOU ARE  
INSTALLING THIS PRODUCT FOR USE BY OTHER PARTIES, YOU AGREE TO INFORM THE USERS THAT USE OF THE  
PRODUCT INDICATES ACCEPTANCE OF THESE TERMS.  
CARTRIDGE LICENSE AGREEMENT  
I agree that the patented print cartridge(s) shipped with this printing device are sold subject to the following  
license/agreement: The patented print cartridge(s) contained inside is/are licensed for a single use only and is/are  
designed to stop working after delivering a fixed amount of ink. A variable amount of ink will remain in the cartridge  
when replacement is required. After this single use, the license to use the print cartridge terminates, and the used  
cartridge must be returned only to Lexmark for remanufacturing, refilling or recycling. If I buy another cartridge in  
the future that is sold subject to the above terms, I accept such terms as to that cartridge. If you do not accept the  
terms of this single use license/agreement; return this product in its original packaging to your point of purchase. A  
LEXMARK SOFTWARE LICENSE AGREEMENT  
This Software License Agreement (“License Agreement”) is a legal agreement between you (either an individual or  
a single entity) and Lexmark International, Inc. (“Lexmark”) that, to the extent your Lexmark product or Software  
Program is not otherwise subject to a written software license agreement between you and Lexmark or its suppliers,  
governs your use of any Software Program installed on or provided by Lexmark for use in connection with your  
Lexmark product. The term “Software Program” includes machine-readable instructions, audio/visual content (such  
as images and recordings), and associated media, printed materials and electronic documentation, whether  
incorporated into, distributed with or for use with your Lexmark product.  
1 STATEMENTOFLIMITEDWARRANTY. Lexmark warrants that the media (e.g., diskette or compact disk) on which  
the Software Program (if any) is furnished is free from defects in materials and workmanship under normal use  
during the warranty period. The warranty period is ninety (90) days and commences on the date the Software  
Program is delivered to the original end-user. This limited warranty applies only to Software Program media  
purchased new from Lexmark or an Authorized Lexmark Reseller or Distributor. Lexmark will replace the Software  
Program should it be determined that the media does not conform to this limited warranty.  
2 DISCLAIMER AND LIMITATION OF WARRANTIES. EXCEPT AS PROVIDED IN THIS LICENSE AGREEMENT AND TO  
THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, LEXMARK AND ITS SUPPLIERS PROVIDE THE SOFTWARE  
PROGRAM "AS IS" AND HEREBY DISCLAIM ALL OTHER WARRANTIES AND CONDITIONS, EITHER EXPRESS OR  
IMPLIED, INCLUDING, BUT NOT LIMITED TO, TITLE, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE, AND ABSENCE OF VIRUSES, ALL WITH REGARD TO THE SOFTWARE PROGRAM. This  
Agreement is to be read in conjunction with certain statutory provisions, as that may be in force from time to  
time, that imply warranties or conditions or impose obligations on Lexmark that cannot be excluded or modified.  
If any such provisions apply, then to the extent Lexmark is able, Lexmark hereby limits its liability for breach of  
those provisions to one of the following: replacement of the Software Program or reimbursement of the price  
paid for the Software Program.  
49  
 
3 LICENSE GRANT. Lexmark grants you the following rights provided you comply with all terms and conditions of  
this License Agreement:  
a Use. You may Use one (1) copy of the Software Program. The term “Use” means storing, loading, installing,  
executing, or displaying the Software Program. If Lexmark has licensed the Software Program to you for  
concurrent use, you must limit the number of authorized users to the number specified in your agreement  
with Lexmark. You may not separate the components of the Software Program for use on more than one  
computer. You agree that you will not Use the Software Program, in whole or in part, in any manner that has  
the effect of overriding, modifying, eliminating, obscuring, altering or de-emphasizing the visual appearance  
ofanytrademark, tradename, tradedress or intellectualproperty noticethatappears on any computerdisplay  
screens normally generated by, or as a result of, the Software Program.  
b Copying. You may make one (1) copy of the Software Program solely for purposes of backup, archiving, or  
installation, provided the copy contains all of the original Software Program’s proprietary notices. You may  
not copy the Software Program to any public or distributed network.  
c
Reservation of Rights. The Software Program, including all fonts, is copyrighted and owned by Lexmark  
International, Inc. and/or its suppliers. Lexmark reserves all rights not expressly granted to you in this License  
Agreement.  
d Freeware. Notwithstanding the terms and conditions of this License Agreement, all or any portion of the  
Software Program that constitutes software provided under public license by third parties (“Freeware”) is  
licensed to you subject to the terms and conditions of the software license agreement accompanying such  
Freeware, whether in the form of a discrete agreement, shrink-wrap license, or electronic license terms at the  
time of download. Use of the Freeware by you shall be governed entirely by the terms and conditions of such  
license.  
4 TRANSFER. You may transfer the Software Program to another end-user. Any transfer must include all software  
components, media, printed materials, and this License Agreement and you may not retain copies of the Software  
Program or components thereof. The transfer may not be an indirect transfer, such as a consignment. Prior to the  
transfer, the end-user receiving the transferred Software Program must agree to all these License Agreement  
terms. Upon transfer of the Software Program, your license is automatically terminated. You may not rent,  
sublicense, or assign the Software Program except to the extent provided in this License Agreement, and any  
attempt to do so shall be void.  
5 UPGRADES. To Use a Software Program identified as an upgrade, you must first be licensed to the original  
Software Program identified by Lexmark as eligible for the upgrade. After upgrading, you may no longer use the  
original Software Program that formed the basis for your upgrade eligibility.  
6 LIMITATION ON REVERSE ENGINEERING. You may not alter, decrypt, reverse engineer, reverse assemble,  
reverse compile or otherwise translate the Software Program, except as and to the extent expressly permitted to  
do so by applicable law for the purposes of inter-operability, error correction, and security testing. If you have  
such statutory rights, you will notify Lexmark in writing of any intended reverse engineering, reverse assembly,  
or reverse compilation. You may not decrypt the Software Program unless necessary for the legitimate Use of the  
Software Program.  
7 ADDITIONAL SOFTWARE. This License Agreement applies to updates or supplements to the original Software  
Program provided by Lexmark unless Lexmark provides other terms along with the update or supplement.  
8 LIMITATION OF REMEDIES. To the maximum extent permitted by applicable law, the entire liability of Lexmark,  
its suppliers, affiliates, and resellers, and your exclusive remedy shall be as follows: Lexmark will provide the  
express limited warranty described above. If Lexmark does not remedy defective media as warranted, you may  
terminate your license and your money will be refunded upon the return of all of your copies of the Software  
Program.  
50  
 
9 LIMITATION OF LIABILITY. To the maximum extent permitted by applicable law, for any claim arising out of  
Lexmark's limited warranty, or for any other claim whatsoever related to the subject matter of this Agreement,  
Lexmark's and its suppliers’ liability for all types of damages, regardless of the form of action or basis (including  
contract, breach, estoppel, negligence, misrepresentation, or tort), shall be limited to the greater of $5,000 or the  
money paid to Lexmark or its Authorized remarketers for the license hereunder for the Software Program that  
caused the damages or that is the subject matter of, or is directly related to, the cause of action.  
IN NO EVENT WILL LEXMARK, ITS SUPPLIERS, SUBSIDIARIES, OR RESELLERS BE LIABLE FOR ANY SPECIAL,  
INCIDENTAL, INDIRECT, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED  
TO LOST PROFITS OR REVENUES, LOST SAVINGS, INTERRUPTION OF USE OR ANY LOSS OF, INACCURACY IN, OR  
DAMAGE TO, DATA OR RECORDS, FOR CLAIMS OF THIRD PARTIES, OR DAMAGE TO REAL OR TANGIBLE PROPERTY,  
FORLOSSOFPRIVACYARISINGOUTORINANYWAYRELATEDTOTHEUSEOFORINABILITYTOUSETHESOFTWARE  
PROGRAM, OR OTHERWISE IN CONNECTION WITH ANY PROVISION OF THIS LICENSE AGREEMENT), REGARDLESS  
OF THE NATURE OF THE CLAIM, INCLUDING BUT NOT LIMITED TO BREACH OF WARRANTY OR CONTRACT, TORT  
(INCLUDING NEGLIGENCE OR STRICT LIABILITY), AND EVEN IF LEXMARK, OR ITS SUPPLIERS, AFFILIATES, OR  
REMARKETERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY YOU BASED  
ON A THIRD-PARTY CLAIM, EXCEPT TO THE EXTENT THIS EXCLUSION OF DAMAGES IS DETERMINED LEGALLY  
INVALID. THE FOREGOING LIMITATIONS APPLY EVEN IF THE ABOVE-STATED REMEDIES FAIL OF THEIR ESSENTIAL  
PURPOSE.  
10 TERM. This License Agreement is effective unless terminated or rejected. You may reject or terminate this license  
at any time by destroying all copies of the Software Program, together with all modifications, documentation,  
and merged portions in any form, or as otherwise described herein. Lexmark may terminate your license upon  
notice if you fail to comply with any of the terms of this License Agreement. Upon such termination, you agree  
to destroy all copies of the Software Program together with all modifications, documentation, and merged  
portions in any form.  
11 TAXES. You agree that you are responsible for payment of any taxes including, without limitation, any goods and  
services and personal property taxes, resulting from this Agreement or your Use of the Software Program.  
12 LIMITATION ON ACTIONS. No action, regardless of form, arising out of this Agreement may be brought by either  
party more than two years after the cause of action has arisen, except as provided under applicable law.  
13 APPLICABLE LAW. This Agreement is governed by the laws of the Commonwealth of Kentucky, United States  
of America. No choice of law rules in any jurisdiction shall apply. The UN Convention on Contracts for the  
International Sale of Goods shall not apply.  
14 UNITED STATES GOVERNMENT RESTRICTED RIGHTS. The Software Program has been developed entirely at  
private expense. Rights of the United States Government to use the Software Program is as set forth in this  
Agreement and as restricted in DFARS 252.227-7014 and in similar FAR provisions (or any equivalent agency  
regulation or contract clause).  
15 CONSENT TO USE OF DATA. You agree that Lexmark, its affiliates, and agents may collect and use information  
you provide in relation to support services performed with respect to the Software Program and requested by  
you. Lexmark agrees not to use this information in a form that personally identifies you except to the extent  
necessary to provide such services.  
16 EXPORT RESTRICTIONS. You may not (a) acquire, ship, transfer, or reexport, directly or indirectly, the Software  
Program or any direct product therefrom, in violation of any applicable export laws or (b) permit the Software  
Program to be used for any purpose prohibited by such export laws, including, without limitation, nuclear,  
chemical, or biological weapons proliferation.  
17 AGREEMENT TO CONTRACT ELECTRONICALLY. You and Lexmark agree to form this License Agreement  
electronically. This means that when you click the “Agree” or “Yes” button on this page or use this product, you  
acknowledge your agreement to these License Agreement terms and conditions and that you are doing so with  
the intent to “sign” a contract with Lexmark.  
51  
 
18 CAPACITY AND AUTHORITY TO CONTRACT. You represent that you are of the legal age of majority in the place  
you sign this License Agreement and, if applicable, you are duly authorized by your employer or principal to enter  
into this contract.  
19 ENTIRE AGREEMENT. This License Agreement (including any addendum or amendment to this License  
AgreementthatisincludedwiththeSoftwareProgram) istheentireagreementbetweenyouandLexmarkrelating  
to the Software Program. Except as otherwise provided for herein, these terms and conditions supersede all prior  
or contemporaneous oral or written communications, proposals, and representations with respect to the  
Software Program or any other subject matter covered by this License Agreement (except to the extent such  
extraneous terms do not conflict with the terms of this License Agreement, any other written agreement signed  
by you and Lexmark relating to your Use of the Software Program). To the extentany Lexmarkpolicies orprograms  
for support services conflict with the terms of this License Agreement, the terms of this License Agreement shall  
control.  
52  
 
Index  
paper exit tray 8  
paper guide 8  
paper support 8  
parts  
access cover 8  
paper exit tray 8  
paper guide 8  
paper support 8  
power button 8  
power supply 9  
USB port 9  
photos  
printing from CD using the  
computer 26  
printing from digital camera  
connected to computer 26  
printing from removable storage  
device connected to  
computer 26  
plain paper, loading 13  
power button 8  
power supply 9  
print cartridge  
A
G
access cover 8  
glossy and photo paper,  
aligning print cartridges 30  
C
I
canceling  
information, finding 6  
installing  
print jobs 19  
cartridge, print  
cartridges, print  
installing 28  
ordering 33  
using genuine Lexmark 30  
CD  
cleaning  
exterior of the printer 33  
custom-size paper, loading 15, 23  
custom-size paper, printing 23  
print cartridges 28  
printer software 9, 39  
iron-on transfers, loading 14  
L
labels, loading 14  
labels, printing 22  
loading  
custom-size paper 15, 23  
iron-on transfers 14  
labels 14  
paper 13, 16  
plain paper 13  
transparencies 15  
print cartridge nozzles,  
D
print cartridges  
aligning 30  
installing 28  
refilling 30  
using genuine Lexmark 30  
print jobs, canceling 19  
print settings  
saving and deleting 24  
printer software  
installing 9  
M
document  
Mac printer software  
multiple copies, printing 17  
documents  
printing 16  
multiple copies, printing 17  
N
E
noise emission levels 47  
emission notices 43, 44, 45, 46, 47  
envelopes  
loading 21  
printing 21  
envelopes, loading 14  
exterior of the printer  
O
ordering paper and other  
reinstalling 39  
printing  
collate 17  
custom-size paper 23  
P
F
page does not print 37  
paper  
finding  
paper and other supplies  
ordering 34  
publications 6  
Web site 6  
53  
 
 
envelopes 21  
labels 22  
last page first 18  
multiple copies 17  
multiple pages on one sheet 18  
photos from CD using the  
photos from digital camera  
connected to computer 26  
photos from removable storage  
device connected to  
reverse page order 18  
specialty documents 24  
Web page 16  
printing photos  
from digital camera connected to  
T
Toolbar  
printing a Web page 16  
transparencies, loading 15  
troubleshooting  
printer communication  
problems 41  
Service Center 35  
troubleshooting, setup  
page does not print 37  
power button is not lit 35  
software did not install 36  
U
USB port 9  
using  
Mac printer software 12  
from flash drive connected to  
from memory card connected to  
publications, finding 6  
W
Web page  
printing 16  
Web site  
Windows software  
Fax Solutions Software 11  
Printing Preferences 11  
R
recycling  
WEEE statement 47  
reverse page order 18  
S
safety information 5  
saving and deleting print  
settings 24  
X
XPS driver  
Service Center 35  
setup troubleshooting  
page does not print 37  
software did not install 36  
software  
removing and reinstalling 39  
Service Center 35  
software did not install 36  
solving printer communication  
problems 41  
54  
 

Learning Resources Baby Toy Ler 2094 User Manual
Leica Projection Television CM1900UV User Manual
Lenovo Laptop Y730 User Manual
Leviton Switch ACS15 1L User Manual
LG Electronics Computer Monitor L1742P User Manual
LG Electronics Microwave Oven MD 2653GT User Manual
Lincoln Electric Welding System K386 User Manual
Linksys Network Card WPC11 User Manual
Mattel Baby Toy B5760 0920 User Manual
MGE UPS Systems Power Supply AmpMeter PDU User Manual