RX®-600 and RX-750 Series
Rangefinders
Complete Operation Manual
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9
Cleaning/Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28
Helpful Hints for Using the Leupold
RX-600 / RX-750 Digital Laser Rangefinders . . . . . . . . . . . . . . . . . . . . . . . Page 29
Warranty / Repair. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 31
1
Introduction
Congratulations! You have purchased a Leupold® RX-600 / RX-750 Series digital
laser rangefinder that has been designed by Leupold’s engineers and designers
to be the best rangefinder on the market and to provide you with years of
solid performance in the field. Following are detailed instructions regarding the
proper use and employment of your RX rangefinder. To ensure top performance
for the life of the product, please read these instructions before operating your
RX-600 / RX-750.
Your new Leupold RX rangefinder is a revolutionary, range-finding device
that incorporates advanced digital electronics with state-of-the-art ballistics
algorithms. RX-600 / RX-750 features include inclinometer, multiple reticle
options, and Last Target Mode. However the truly innovative and unique
feature is True Ballistic Range® (TBR), which is available on the RX-750 model.
TBR algorithms were developed by the same engineers who developed Sierra
Infinity® Exterior Ballistics Software and who helped develop navigation and
guidance systems for ICBMs and other missiles with far more demanding
trajectory requirements than a hunting bullet. TBR is a marriage of laser ranging,
an inclinometer, and an advanced computerized ballistics program. The result
is distance measurements accurate within a yard, no matter the angle at which
the laser is fired. Bullets and arrows travel in a ballistic arc, yet conventional
rangefinders only provide a linear distance to your target. TBR delivers the
ballistic equivalent range to the target, accounting for the effects of inclines or
declines on the path of your bullet or arrow. Other features that are provided for
firearms are outputs that display either MOA adjustments, or inches /centimeters
of holdover at that specific distance. TBR eliminates any potentially significant
error, and provides a precise range for your aiming calculations. TBR is matched
to seven rifle ballistics groups and three archery ballistics groups, allowing use
with most popular firearms and bows.
HOW THE RX-600 / RX-750 WORKS
The RX-600 and RX-750 are top-quality 6x22mm monoculars that incorporate the
additional benefit of a state-of-the-art laser rangefinder capable of measuring
the distance of a deer-sized animal from 5 yards to 400 yards (RX-600), 500 yards
(RX-750), an inanimate object from 5 yards to 500 yards (RX-600), 600 yards (RX-
750), and a reflective target from 5 yards to 600 yards (RX-600), 750 yards (RX-
750). The rangefinders emit a series of invisible, infrared energy pulses that are
reflected off the selected target back to the optical unit. State-of-the-art circuitry
and precision computing circuits are used to calculate the distance by measuring
the time it takes for each pulse to travel from the RX-600 / RX-750 to the object
and back.
2
3
Safety and Operation Precautions
The Leupold RX-600 and RX-750 6x22mm rangefinders employ an eye safe
FDA Class 1 and CE Class 3A laser in their operation. Even so, there are a few
precautions that are important to remember:
•
Do not depress the POWER button while aiming at a human eye or while
looking into the optics from the objective side
•
•
Do not leave the rangefinders within the reach of small children
Do not take the product apart as it has a self-protection device in the
electronic control module and may cause an electric shock
•
Do not attempt to use any power source other than a CR2 battery
(or equivalent) — the RX-600 and RX-750 rangefinders are designed to
prohibit accessing any other external power supply
RX-600/750 Features at a Glance
POWER
•
Laser Radiation: FDA Class 1 / CE Class 3A
Measurement Range: 5 yds – 600 / 750 yds
Measuring Time: Less than 1 second
Auto Power Off after 7 seconds
FOCUS
•
•
•
•
•
•
•
-/+
MODE
X -I
R
Power: CR2 battery or equivalent
Battery Life: At least 3,000 measurements
Accuracy: +/- 1 yard/meter
The RX-600 / 750 are weatherproof
BATTERY
4
5
Battery Power StatuS IndIcator
To determine your battery’s power level, look for the following indicators:
FULL – A full battery bar indicates your battery is at or near peak capacity.
HALF – A half-full bar indicates your battery has reached half-capacity.
LOW – If the battery bar is empty, yet there is still data displayed above the bar, the
battery is nearing the end of its life and should be replaced.
NO POWER – If the battery bar is empty, and there is no data displayed above the
bar, your battery is dead and you must replace it. The battery status bar will flash
and the unit will shut down when no power remains.
MeaSurInG dIStance wItH tHe rX-600 / 750
Measurement of distance with the RX-600 / 750 is a very simple operation:
1. View the object of interest through the monocular.
2. Depress the POWER button to power up the unit.
3. Align the reticle over the object being viewed.
4. Depress the POWER button again – this will cause the laser to activate.
5. Read the distance as shown in the image field.
CONTINUOUS MEASUREMENT OF A MOVING TARGET / SCAN MODE:
1. Follow the instructions for “Measuring distance…” as explained previously.
2. Once the target has been measured, continue to hold down the POWER
button and follow the object as it moves.
3. The distance will automatically update as long as the POWER button is
continuously depressed.
4. This procedure can also be used to obtain the range of multiple animals
or objects; simply move the reticle from one target to another while
holding down the POWER button.
CLEARING THE LAST DISTANCE OBTAINED:
The last range reading does not need to be cleared before reading another
object’s distance. For that reason, there is no reset button. Simply aim at the
new object using the reticle, depress the POWER button and hold until the new
range reading is displayed.
6
7
Following is a reference table listing the ranges of the various models under
different conditions:
MAXIMUM RANGE
CONDITION
Reflective Target (yd/m)
Trees (yd/m)
RX-600
600/550
500/455
400/365
RX-750
750/685
600/550
500/455
Deer (yd/m)
Surface texture, color, size, and shape of the target all affect reflectivity, which
in turn affects the maximum range of the instrument. as a rule of thumb,
brightly colored targets are much more reflective than darker targets. tan
game coats are more reflective (and thus provide a more solid reading) than a
black roof. a shiny surface is more reflective than a dull surface. Smaller targets
are more difficult to range than larger targets. Light conditions, haze, fog, rain,
and other environmental conditions can all affect ranging performance. any
factor which degrades air clarity will reduce the maximum effective range. the
sun generates infrared energy that can degrade ranging performance in bright
conditions or when ranging towards the sun.
8
Specifications
The RX-600 and RX-750 Series of digital laser rangefinders provides a variety of
useful modes to tailor performance to the conditions you experience in the field.
Model features are identified on the following pages.
RX-600
6×
RX-750
6×
Magnification
Inclinometer
No
Yes
TBR (True Ballistic Range)
Last Target Mode
Line of Sight Distance (LOS)
Yards / Meters Mode
Scan Mode
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Battery Life
>3,000 Actuations >3,000 Actuations
Weight
7.0 oz
4.2 x 3.0 x 1.6
Yes
7.0 oz
4.2 x 3.0 x 1.63
Yes
Dimension (Inches)
Battery Status Indicator
Warranty
1 Year
Yes
1 Year
Yes
Weatherproof
Accurate +/- 1 Yard @ <100 yds.
Yes
Yes
Operation
QUICK SET MENU™
F
*Display shown with all possible modes visible
9
10
QUICK START MENU
when you initially push the Power button, the unit is ready for scanning. to
enter the Quick Set MenutM, press and hold the Mode button for at least 1
second.
to manipulate a function, press the Mode button until that function is
displayed, then use the Power button to change the setting. If this is the last
function to be changed, you can allow the rangefinder to sit idle for 20 seconds
which will cause an automatic power-off, saving all selections. If additional
functions require manipulation, simply press Mode to continue through the
Quick Set Menu. Pressing and holding Mode for 1 second at any time will
save all changes, exit the Quick Set Menu, and prepare the rangefinder for
immediate use.
Note: Activating certain modes automatically disables other modes. For example
activating the yards mode will automatically deactivate the meters mode.
FunctIon 1: rIFLe Mode (rFL)
(rX-750 ModeL onLy)
F
TBR calculates the equivalent horizontal range
(level fire range) from which you can determine the
correct aim for the conditions. For example, if you
are shooting a .270 caliber, 130 grain bullet at 3,050
feet per second up a 30° incline at 400 yards, direct
line of sight, the TBR output will be 372 yards. The
first step in correctly using TBR is to Practice, Practice,
Practice. Anytime you handle a firearm or bow, you
are ultimately responsible for your projectile.
The inclinometer output is shown beside the LOS. The inclinometer output
will be disabled when RFL or BOW mode is turned off.
For rifle users, adjustment or holdover information can also be displayed. The
available settings are as follows: BAS outputs the equivalent range to use with
Leupold’s Ballistic Aiming System® reticles or the equivalent horizontal range,
Hold displays the inches or centimeters to hold over the intended point of
impact, and MOA displays the minute of angle correction to “dial” into your
scope.
11
12
F
For rifle users, RFL mode is comprised of three TBR
functions: HOLD, MOA, and BAS. One of these modes
must be selected. To select the desired function, navigate
through the Quick Set Menu until RFL is reached (activate
if necessary). While the RFL icon is highlighted and the
word “SEt” is shown in the upper display, press and release
POWER repeatedly to scroll through HOLD, MOA, and BAS
respectively; press MODE when the desired function is
displayed. For information regarding BOW settings, please
see pages 22-23.
F
BaS displays the equivalent horizontal range, which is based
upon the ballistics group and sight-in distance you will
choose in a later mode. this is the range you will want to use
when shooting, rather than the line of sight distance, which
may contain gross errors depending upon the shot angle.
readings will be displayed with equivalent horizontal range.
the upper display shows the true Ballistic range and the
lower display shows the line-of-sight distance to the target.
F
HoLd will display the appropriate amount of holdover to
use, which is based upon the ballistics group and sight-in
distance you will choose in a later mode. the upper display
shows whether you should hold Hi or Low, and the number
of inches or centimeters to be used for proper correction. For
example, a reading of “Hi, 8” means you should hold 8 inches
above the intended point of impact if measuring in yards. If
measuring in meters, you should hold 8 centimeters above the
intended point of impact. the lower display shows the line-of-
sight distance to the target.
F
F
Moa mode will show the minute-of-angle adjustment for
your target which is based upon the ballistics group and sight-
in distance you will choose in a later mode. the upper display
shows whether you should dial the scope’s adjustments up
or down, and the number of Moa to be used for proper
correction. For example, a reading of “up, 4” means you
should dial 4 Moa in the up direction, then aim directly at
the intended point of impact. the lower display shows the
line-of-sight distance to the target.
F
NOTE: True Ballistic Range is available only in the RX-750
13
14
TBR (TRUE BALLISTIC RANGE): RIFLE
F
TBR (TRUE BALLISTIC RANGE): BOW
W
15
16
FUNCTION 2: SEVEN RIFLE BALLISTICS GROUPS
(RX-750 MODEL ONLY)
tBr includes ballistics settings for seven rifle cartridge groups, which are displayed
as a, B, c, aB, ac, Bc, and aBc. For example, if your cartridge type is in Group
a, the displayed reading will account for the shot angle and provide the
proper distance for holdover purposes (see following chart). you must choose
one of the seven groups, based on your cartridge and ballistics information.
tBr performance groups organize load performance in a way that generally
provides less than 2.5 inches (1/2 minute of angle) of error in aiming out to
500 yards. the cartridge table shows a common assortment of factory loads
organized in their tBr performance groups. If you are shooting a similar bullet
weight and muzzle velocity that falls into the provided selections, you can use
that mode with full confidence.
TBR PERfORMANCE GROUPS: CARTRIDGE TABLE
TBR
Sight-In
Bullet Weight
(grains)
Muzzle Velocity
(feet per second)
Cartridge Name
Group Distance
.270 Weatherby Magnum
Lazzeroni 7.21 Firebird
.30-.378 Weatherby
.30-.378 Weatherby
.300 Weatherby Magnum
.240 Weatherby
100
140
165
180
150
87
3760
3640
3500
3450
3450
3520
3400
3200
3245
3250
3330
3050
3340
3070
3310
3250
3025
3120
3280
2960
3300
3025
3030
4225
3090
3650
3700
300
Yards
A
.240 Weatherby
100
130
150
130
140
160
139
175
140
180
200
180
150
180
150
180
180
32
.270 Weatherby Magnum
.270 Weatherby Magnum
.270 Winchester Short Magnum
7mm Shooting Times Westerner
7mm Shooting Times Westerner
7mm Weatherby Magnum
7mm Weatherby Magnum
7mm Winchester Short Magnum
.300 Remington Ultra Magnum
.300 Remington Ultra Magnum
.300 Weatherby Magnum
.300 Winchester Magnum
.300 Winchester Magnum
.300 Winchester Short Magnum
.300 Winchester Short Magnum
.338 Remington Ultra Magnum
.204 Ruger
300
Yards
B
.204 Ruger
.22-250 Remington
.223 Remington
40
55
40
200
Yards
C
continued on next page
17
18
TBR PERfORMANCE GROUPS: CARTRIDGE TABLE
TBR
Sight-In
Bullet Weight
Muzzle Velocity
(feet per second)
Cartridge Name
(grains)
Group Distance
.223 Winchester Super Short Magnum
55
64
55
100
85
3850
3600
4060
3110
3470
2990
2990
2890
2910
2850
3275
2990
2990
2890
2950
2960
3000
2800
2660
2829
2990
2750
2630
2860
2940
2880
2700
3140
.223 Winchester Super Short Magnum
.243 Winchester Super Short Magnum
.243 Winchester Super Short Magnum
.25 Winchester Super Short Magnum
.25-06 Remington
.25-06 Remington
.260 Remington
.270 Winchester
.270 Winchester
.270 Winchester Short Magnum
7mm Winchester Short Magnum
.280 Remington
.280 Remington
.243 Winchester
.243 Winchester
7mm-08
7mm-08
.338 Remington Ultra Magnum
.338 Winchester Magnum
.25 Winchester Super Short Magnum
.260 Remington
6.5x55mm Swedish
7mm Remington Magnum
.280 Remington
.300 H&H Magnum
.300 Weatherby Magnum
.30-06 Springfield
115
120
120
130
150
150
160
140
150
100
100
120
140
250
210
120
115
140
175
160
180
200
125
200
Yards
C
200
AB
Yards
200
AC
Yards
continued on next page
TBR PERfORMANCE GROUPS: CARTRIDGE TABLE
TBR
Sight-In
Bullet Weight
Muzzle Velocity
(feet per second)
Cartridge Name
(grains)
Group Distance
.30-06 Springfield
.308 Winchester
.308 Winchester
.338 Winchester Magnum
.338 Winchester Magnum
.378 Weatherby Magnum
.460 Weatherby Magnum
180
150
168
210
250
300
450
300
64
2700
2820
2670
2830
2650
2800
2700
2925
3020
2920
200
AC
Yards
BC
200 Yards .378 Weatherby Magnum
.223 Remington
ABC 200 Yards
.378 Weatherby Magnum
300
For hand loads or any other unique loads not shown in the above list, the table on
the next page provides a guideline for selecting the appropriate tBr performance
group. check the ballistic performance of your bullet by consulting your reloading
manual, ballistics software, or by referring to literature or web sites provided by
your cartridge manufacturer. you may also visit the Leupold web site at
www.leupold.com for more assistance in selecting your group. If you have your
ballistics performance data, select your performance group from the table on the
next page based on the bullet path at 500 yards. Be sure not to confuse bullet path
with bullet drop. Bullet path will be related back to your sight-in range whereas
bullet drop relates only to the total drop of the bullet, regardless of sight-in range.
19
20
TBR PERfORMANCE GROUP SELECTION TABLE: fOR BEST fIT UP TO 500 YARDS
TBR
Group
Sight-in
Range
500 Yards Bullet Path
A
B
C
AB
AC
BC
Less than -20 inches of path height
-20 to -25 inches
-35 to -41 inches*
-41 to -42.5 inches
-42.5 to -49.5 inches
-49.5 to -52 inches
300 Yards
300 Yards
200 Yards
200 Yards
200 Yards
200 Yards
More than -52 inches of path height (if the path height is more than 64 inches, performance
will be reduced by the difference)
ABC
200 Yards
* If your bullet height path is less than -20 inches at 500 yards with a 200 yard sight-in, consider sighting-in at
300 yards and selecting group A or B. Alternately, you can use group C with a 200 yard sight-in, but the TBR
will be less accurate at extreme long ranges.
to activate the appropriate ballistics group, rFL must be
activated and you must choose between BaS, Moa, or HoLd.
once this has been done, pressing the Mode button will allow
you to select the appropriate ballistics group. GrP (Group) will
be shown in the upper display, and the current ballistics group
will be shown in the lower display. Press and release Power
repeatedly to scroll through the available ballistics groups.
F
Extreme Long Range Group Selection — If you intend to shoot varmints or targets at
ranges beyond 500 yards, selecting your group based on 800 yard performance will provide
a better performance match throughout this working range. Select your group for extreme
long range shooting from the table below.
TBR PERfORMANCE GROUP SELECTION TABLE: fOR BEST fIT UP TO 800 YARDS
TBR
Group
Sight-in
Range
800 Yards Bullet Path
A
B
C
AB
AC
BC
Less than -96 inches of path height
-96 to -120 inches
-139 to -164 inches**
-164 to -189 inches
-189 to -212 inches
-212 to -236 inches
300 Yards
300 Yards
200 Yards
200 Yards
200 Yards
200 Yards
More than -236 inches of path height (if the path height is more than 250 inches, performance
will be reduced by the difference)
ABC
200 Yards
** If your bullet path height is less than -139 inches at 800 yards with a 200 yard sight-in, consider sighting-in at
300 yards and selecting group A or B. Alternately, you can use group C with a 200 yard sight-in, but the TBR will
be less accurate at extreme long ranges.
REMEMBER: Knowing your theoretical bullet path at long ranges does not
provide a license to take shots beyond ranges at which you have practiced,
particularly at game animals or where stray shots could hit unintended targets.
It is your responsibility to have intimate familiarity with the performance of
your firearm and take full responsibility for the projectile. The RX-750 digital
laser rangefinder may serve best as a tool for learning performance during
practice at a secure range so you are ready for that critical shot.
21
22
FUNCTION 3: BOW MODE
(RX-750 MODEL ONLY)
this mode, when activated, works with tBr to provide the correct ballistics
range for arrows. to activate, navigate through the Quick Set Menu by pressing
Mode until the Bow icon is displayed, then use the Power button to turn it
on/off. Selecting the Bow Mode automatically deactivates the rifle Mode. the
displayed range represents the ballistically equivalent horizontal distance to
the target. It incorporates three different groups (a, B, or c) depending on the
particular arrow drop. you must choose one of the three groups, based on your
bow and arrow performance.
BOW GROUP DATA
Bow Initial arrow velocity Drop from 20 yard pin
Typical Bow Description
Group (feet per second)
at 40 yards (inches)
30 or more
Older bows shooting aluminum arrows and newer bows set at
draw weights below 50 lb
A
B
C
Less than 215
215 to 250
20 to 30
Quality, newer bows shooting at 50-60 lb draw weight
Fast bows with draw weights in excess of 60 lb
250 or more
Less than 20
to activate the appropriate ballistics group, Bow must be activated. once this has
been done, pressing the Mode button will allow you to select the appropriate
ballistics group. GrP (Group) will be shown in the upper display, and the current
ballistics group will be shown in the lower display. Press and release Power
repeatedly to scroll through the available ballistics groups.
W
only one group can be selected at a time. Selecting a new
group deactivates all other groups. Most importantly, using
Bow effectively means to Practice, Practice, Practice. anytime
you handle a firearm or bow, you are ultimately responsible for
your projectile. For best results, measure the drop of your arrow
at 40 yards when using your 20 yard aiming point.
1. Set up a small target point such as a two-inch circle of paper high on a large, safe
background, such as a stack of bales backed by a solid backstop. Be sure to allow for
three feet or more of drop to avoid arrow damage.
2. Shoot 2 or 3 arrows at the target from 40 yards, using your 20 yard pin on the small
target.
3. Measure the distance from the small target to the center of the group of arrows.
4. Select your TBR bow group from the “Drop from 20 yard pin at 40 yards”
column above.
Initial velocity should only be used if an arrow speed chronograph
measurement has been obtained. Manufacturer’s published data such as IBO
speed is based on standard draw length and weight that is likely to vary with
your bow, therefore the actual performance may not be the same.
23
24
FunctIon 4: unIt outPut
this mode is used to choose between yards and meters as the preferred unit of
measure. tBr measurements are shown in the top portion of the display, line of
sight measurements shown in the bottom portion of the display (RX-750 Model Only)
.
to choose between yards and meters, navigate through the Quick Set Menu by
pressing the Mode button until “unit” is shown in the upper
display. Press and release the Power
button to alternate between yards and meters.
FUNCTION 5: LAST TARGET MODE
(rX-750 ModeL onLy)
this mode is used to display the distance to the farthest object when more than
F
one object may be read. Multiple objects will often return an
average distance. Last target Mode ensures an accurate reading
on the farthest object.
to activate Last target mode, navigate through the Quick
Set Menu by pressing the Mode button until the Last target
icon is shown in the left portion of the display. Press
and release the Power button to turn Last target on/off.
25
26
FunctIon 6: LIne oF SIGHt outPut
this mode, when activated, provides the straight line
distance to the target in the bottom portion of the display.
to activate LoS, navigate through the Quick Set Menu by
pressing the Mode button until the LoS icon is shown in
the lower right portion of the display. Press and release the
Power button to turn LoS on/off. If you deactivate both
the rifle mode and bow mode, LoS mode will automatically
be activated.
NOTE: On the RX-600 model, LOS is shown in the upper
portion of the display at all times.
27
FUNCTION 7: 3 SELECTABLE RETICLES
This mode allows you to choose any one of the 3 preloaded reticles as the
primary aiming point for the RX-600 / 750 digital laser rangefinders. To select
a reticle, press MODE repeatedly until the current reticle is blinking. Press
POWER repeatedly to scroll through the available reticles, then press MODE
when the preferred reticle is shown. The reticle choices are as follows:
Plus Point™
Duplex®
Duplex®
with Plus Point™
without Plus Point™
Plus PointTM: Ideal for varmints
and other small targets. Small open
center avoids coverage of very
small or distant targets.
Duplex®: Familiar reticle to shooters from riflescopes; draws eye to the center,
easy to see, does not cover the target in the center where aiming is most critical.
Cleaning/Maintenance
Blow away dust or debris on lenses, or use a soft lens brush (such as the one
found on the Leupold LensPen). To remove fingerprints, water spots or tougher
dirt, use a soft cotton cloth or the cleaning end of the Leupold LensPen. A lens
tissue with lens cleaning fluid may be used for more stubborn dirt. Always
apply cleaning fluid to the cleaning cloth, never directly to the lens.
To insert a new battery, remove battery cover (shown in diagram on page 4) and
remove exhausted battery. Insert new CR-2 battery, negative terminal
first, into the battery compartment. Close battery cover.
To focus the digital laser rangefinder, turn the eyepiece left or right
(you will feel and hear the clicking of the diopter, indicating a change
to the focus has been made) until crisp display focus is achieved.
RX-600 and RX-750 models are weatherproof.
All models include a lanyard and are equipped with a lanyard attachment
for added security in the field. All models are also supplied with a small
instructional supplement in the inside pocket of the included case.
28
29
Helpful Hints for Using the Leupold
RX-600/750 Digital Laser Rangefinders
HOW DO I ACTIVATE TRUE BALLISTIC RANGE (TBR)?
Only available in RX-750.
See Function 1 on page 11. Be sure to select the proper group for bows
on page 22 or rifles on pages 16-21.
HOW DO I ACTIVATE SIMPLE LINE OF SIGHT (LOS) RANGE?
Always on for all RX-600 models.
For RX-750 model, follow the Quick Set Menu procedure (see page 10)
.
WHEN I SHOOT BASED ON THE TRUE BALLISTIC RANGE READOUT PROVIDED
BY THE RANGEFINDER, THE PROjECTILE IS NOT HITTING THE TARGET.
The first step in correctly using TBR is to Practice, Practice, Practice. Anytime
you handle a firearm or bow, you are ultimately responsible for your
projectile. Be certain that if you’re shooting a bow that “BOW” is turned on.
Be certain that if you’re shooting a rifle that “RFL” is turned on.
Be certain you selected the correct ballistics groups (see page 22 for bows
or pages 16-21 for rifles). It is imperative that a rifle be sighted-in at the
recommended range.
For rifles, ballistics performance of firearms and ammunition may vary from
manufacturers published information.
RANGEFINDER DOES NOT PROVIDE RANGE.
•
Make sure that the POWER button is being depressed (as opposed to
MODE button)
•
Make sure that nothing, such as your hand or finger, is blocking the
lenses — as this could interfere with the emission and reception of the
laser pulses
•
•
Make sure unit is held steadily while depressing the POWER button
When using BOW mode, it is important to note that TBR returns are
limited to 60 yards; returns greater than 60 yards will be displayed in the
LOS display; 800 yards for rifles
•
Make sure the target is at least 5 yards away
HOW DO I ACTIVATE THE INCLINOMETER READOUT?
RX-750 Models: RFL or BOW must be activated for the angle of inclination to
display (see page 11 for rifles or page 22 for bows).
NOTE: The inclinometer is only available on the RX-750 model.
30
31
Warranty/Repair
Your Leupold RX-600 / 750 Series digital laser rangefinders are warranted by
the Leupold Green Ring™ Electronics Warranty, and is protected from defects in
materials and workmanship for ONE YEAR from the date of purchase. In event
of a need for service or repair, please contact Leupold Product Service at:
BY PARCEL SERVICE:
Leupold Product Service
14400 NW Greenbrier Parkway
Beaverton, OR 97006-5791 USA
BY POSTAL SERVICE:
Leupold Product Service
P.O. Box 688
Beaverton, OR 97075-0688 USA
For product questions, consult the Leupold Web site at:
Leupold & Stevens, Inc. reserves all other rights. ALUMINA; AMERICA’S OPTICS AUTHORITY; BOONE AND CROCKETT; CQ/T;
DESIGN ONLY (GOLDEN RING); DUPLEX; GOLDEN RING; INDEX MATCHED LENS SYSTEM; KATMAI; LEUPOLD; LPS; LR/T; MADE
RIGHT, MADE HERE; MARK 2; MARK 4; MESA; MR/T; MULTICOAT 4; PERFORMANCE STARTS ON THE INSIDE; QUICK SET
ROTARY MENU; RAINCOTE; RIFLEMAN; SCOPESMITH; SEQUOIA; SPR; SWITCH/POWER; TBR; TMR; TRUE BALLISTIC RANGE;
TURKEY PLEX; VARI-X; VX; YOSEMITE; and ZERO POINT are registered trademarks of Leupold & Stevens, Inc., Beaverton,
Oregon. ADVANCED IMAGE OPTIMIZATION; BLACK RING; BUILT FOR GENERATIONS; BZ; CLEAR FIELD; DIAMONDCOAT;
DIAMONDCOAT 2; DIGITAL INSTRUMENT PANEL; DUAL DOVETAIL; FX; GREEN RING; INFINITE POWER BAND; INTESIFIER;
L-COAT; LIGHT OPTIMIZATION PROFILE; ; MATCH 13 RETICLE SYSTEM; OG; OLYMPIC; ONE-TIME FOCUS; OP; OPTIMIZER;
PINNACLES; PRW; QR; QRW; QUICK RELEASE; RAIN SHED; SPEEDIAL; STD; TOTAL LIGHT THROUGHPUT; XTENDED TWILIGHT
LENS SYSTEM; X-TREME; and YL are trademarks of Leupold & Stevens, Inc., Beaverton, Oregon. Note: We reserve the right to
make design and/or material modifications without prior notice.
Leupold products are manufactured under one or more of the following patents: U.S. Patents: 5,035,487; 5,231,535; 5,671,088;
5,866,048; 6,005,711; 6,279,259; 6,295,754; 6,351,907; 6,359,418; 6,469,829; 6,519,890, 6,691,447; 6,816,305; 7,088,506;
D347,441; D403,393; D413,153; D414,835; D415,546; D416,972; D420,718; D420,807; D421,286; D427,658; D490,097;
D506,520; D512,449; D517,153; D519,537. Foreign Patents: BX30938-00; CA-Rd./Enr.1999-88472; DE49903766.9;
DE69216763T; DE-M9304093.8; DE202005017276U1; EP0540368; GB0540368; IL31338; IT75604; JP1074623; SE55201;
TW148948; EM59613; EM393467.
This publication may not be reprinted or otherwise reproduced without the expressed written consent of Leupold & Stevens, Inc.
Copyright © 2009 Leupold & Stevens, Inc. All rights reserved.
32
|