Lennox Hearth Stove P N 506033 52 User Manual

HEARTH PRODUCTS  
KITS AND ACCESSORIES  
P/N 506033-52  
Rev. NC, 08/2011  
GRANDVIEW™ LEG KITS  
INSTALLATION INSTRUCTIONS FOR INSTALLING LEGS  
ON A GRANDVIEW™ 230 WOODSTOVE  
INSTALLATION INSTRUCTIONS  
KIT CONTENTS  
Please ensure that all these parts are included  
Step 1. Carefully place stove on it’s back. Be careful not to scratch the  
stove,use a piece of cardboard or carpet to protect the back of the  
stove.  
Step 2. Using a 9/16” wrench or socket remove the bolt in each of the four  
corners along with the attached shipping brackets.  
4 ea. Legs  
4 ea. Hex Bolts 3/8” x 1” Length  
4 ea. Washers 3/8”  
Step 3. Remove legs from the packaging and using the bolts and washers  
that come with the legs install each leg in each corner with one bolt  
and one washer.  
Step 4. Before the legs are fully tightened down make sure that they are  
aligned correctly to match the front and side planes of the stove.  
Step 5. The stove can now be set up on the legs making sure that all baffle  
boards and bricks are set back in place. These items may have  
shifted when the stove was placed on it’s back.  
Step 6. If it is necessary to level, secure, or ground your stove, use the  
holes in the bottom of the leg for those applications. To level the  
stoveuseleglevelingkit(P/NH8407)orlevelingpads(P/NH7638).  
Level by adjusting the bolt or leveling pad down on each leg that is  
not in full contact with the hearth or surface below that the stove  
in located on.  
Grandview™ Leg Kits  
Cat. No.  
H8339  
H8340  
H8341  
H8342  
70000  
70002  
70008  
Model  
Description  
Coastal Legs, Black  
LEG-COSTL-BLK  
LEG-COSTL-BRNKL Coastal Legs, Brushed Nickel  
LEG-COSTL-NKL Coastal Legs, Nickel  
LEG-LKVIEW-BLK Lakeview Legs, Black  
LEG-OLY-B  
LEG-OLY-N  
Olympic Sculptured Black  
Olympic Sculptured Nickel  
LEG-OLY-BRN  
Olympic Sculptured Brushed Nickel  
TOOLS NEEDED  
9/16” Open End Wrench Or Socket  
GENERAL INFORMATION  
If you encounter any problems, need clarification of these instructions or  
are not qualified to properly install this kit, contact you local distributor  
or dealer.  
Read this instruction sheet in its entirety before beginning the installation.  
ALL WARNINGS, PRECAUTIONS AND INSTRUCTIONS IN THE INSTAL-  
LATION AND OPERATION MANUAL PROVIDED WITH THE APPLIANCE  
APPLY TO THESE INSTRUCTIONS.  
Check the contents of the kits upon receipt and check for any damaged  
or missing parts. If there is hidden damage, notify your freight company  
or Lennox Hearth Products dealer immediately.  
CAUTION: Wear gloves during installation in case of sharp  
edges on the stove.  
Be sure to clean plated surfaces with a soft cloth and household glass  
cleaner prior to burning the appliance. Fingerprints left on plated  
surfaces while burning may remain on the finish permanently.  
Figure 1  
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE.  
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products.  
Consult your local distributor for fireplace code information.  
Printed in U.S.A. © 2011 Lennox Hearth Products  
Lennox Hearth Products  
1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210  
1
P/N 506033-52 Rev. NC 08/2011  
 

Land Pride Lawn Mower RB0548 User Manual
Lanzar Car Audio Car Video System SVHR56 User Manual
Laser MP3 Player MP3 A7 User Manual
Life Fitness Home Gym BWCDLR User Manual
Link electronic Network Router HDC 925 User Manual
Logitech Mouse M185 User Manual
Lola Products Laser Pointer UR89A User Manual
LSI Network Card ITI7004G2 User Manual
Melissa Vacuum Cleaner 640 043 User Manual
Melissa Vacuum Cleaner 740 110 User Manual