Relay Modules
RL58-1/RL58-2
• 8 or 4 relay outputs, respectively,
with one dry changeover contact
each
• Actuation display by LED for each
output
• Switch contacts on terminals
• Easy mounting on componentry
carrier
• Connection with control panel via flat
cable
Description
The fire detection control panels Series BC216 and The RL58-1 provides eight relay outputs with a maxi-
BC016, respectively, provide 16 freely programmable mum contact rating of 30W. The current is limited to 1A
open-collector control outputs. Eight of these outputs and the voltage is limited to 60VDC. The RL58-2 offers
are connected to a flat cable connector. The Relay Mo- four relay outputs with a maximum of 5A/230VAC. The
dules RL58-1 and RL58-2 allow for the easy conversion terminal of the RL58-2 are designed for mains voltage.
of these control outputs to dry changeover contacts. Two relay modules RL58-2 are each cascadable via pin
The componentry is connected to the fire detection con- connectors. The relay module is delivered with flat ca-
trol panel via a flat cable.
ble and mounting accessories for easy installation.
Specifications
Operating voltage
20 – 31VDC
Current consumption at 24V
Control current
typ. 22mA per activated circuit
typ. 1.2mA per input
-5°C to +50°C
Ambient temperature
RL58-1
Switching power per contact
Contact life
1A/60V/30W
approx. 5 mill. switching cycles (unloaded)
approx. 300,000 switching cycles (at 24VDC/1A)
Dimensions L × W × H
Weight
85 × 65 × 37 (mm)
330g
Part No.
222004
Order name
Relay Module 8-Fold/60VDC RL58-1
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
RL58_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|