Kyocera Cell Phone Q Phone User Manual

Q PHONE  
USER GUIDE  
Kyocera Wireless Corp.  
10300 Campus Point Drive  
80-B6670-1, Rev. -  
 
CONTENTS  
Contents ...................................................................3  
Important Information .........................................5  
Highlights..............................................................6  
Clamshell Design ..................................................7  
Display Indicators...............................................10  
Using the Battery ...............................................11  
Turning the Phone On and Off ..........................12  
Antenna ...............................................................13  
Charging the Battery..........................................13  
Basic Functions ................................................... 15  
Function Keys .....................................................15  
Making a Call......................................................16  
Correcting Dialing Mistakes ..............................16  
Getting Your Own Phone Number.....................16  
Receiving Calls....................................................17  
Call Waiting ........................................................17  
Three-way Calling ..............................................18  
Redialing Calls....................................................18  
Adjusting Volume ...............................................18  
Emergency Dialing .............................................18  
Signal Strength...................................................19  
Power Save Mode................................................20  
Phone Book Feature............................................21  
The Two Phone Book Types ...............................21  
Saving Numbers to Your Primary Phone Book.22  
Retrieving Numbers from your Phone Book .....23  
Changing Your Phone Book ...............................26  
Dialing Numbers from Your Phone Book ..........27  
Advanced Phone Book Features ........................28  
Menu Feature....................................................... 31  
Main Menu ..........................................................31  
3
 
Menu Access Method ..........................................31  
Shortcut Menu Access Method...........................32  
Menu Item Descriptions .....................................32  
Paging, Messaging, and Voice Mail................. 39  
New Message Alert .............................................40  
Viewing Pages and Messages.............................41  
Voice Mail Notifications .....................................43  
Low Memory Warning ........................................44  
Out of Memory Warning.....................................44  
Accessories ........................................................... 45  
Phone Safety and Care ...................................... 46  
Background .........................................................46  
For Best Performance.........................................47  
Antenna Care......................................................47  
Caring for the Battery ........................................48  
Driving Safety .....................................................49  
Other Safety Guidelines .....................................50  
Where To Find Help............................................ 53  
Your Service Provider.........................................53  
Your Phone Documentation ...............................53  
Kyocera Technical Support ................................53  
Index ...................................................................... 55  
4
 
Important Information  
Caution  
The user is cautioned that changes or modifications  
not expressly approved by the party responsible for  
compliance could void the warranty and the user’s  
authority to operate the equipment.  
Warning  
Use only Kyocera Wireless Corp. approved  
accessories with Kyocera Wireless Corp. phones.  
Use of any unauthorized accessories may be  
dangerous and will invalidate the warranty if said  
accessories cause damage or a defect to the phone.  
FCC/IC Notice  
This device complies with part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference,  
and (2) this device must accept any interference  
received, including interference that may cause  
undesired operation.  
5
 
GETTING STARTED  
Highlights  
Congratulations on your purchase of the Q phone.  
It is an easy-to-use, versatile, and dependable palm-  
sized phone which provides many unique features  
including:  
• Large, easy-to-read, 4-line backlit text display  
with an additional line for informative icons  
• 19-button lighted keypad  
• Menu-driven interaction with prompts  
• Inherent call privacy through CDMA encoding  
• Clamshell design that opens for placing/receiving  
calls and closes for minimum size, maximum  
portability, and keypad locking  
• Any key answer, speed dial, auto redial, and 99  
memory locations for phone numbers  
• Advanced features such as short messaging  
service and caller ID  
• Selectable ringer, including a built in vibrator  
• Optional accessories  
This section includes drawings of the important  
phone parts and instructions on getting your phone  
powered up and ready to use.  
6
 
Clamshell Design  
The phone opens and closes like a clam shell. It  
must be open to use any of the phone’s features.  
When the phone is closed, the keypad is locked and  
covered. You will hear the phone ring (if the phone  
is on) but you must open the phone to answer the  
call.  
This feature allows you to keep the phone on, and in  
your pocket or brief case, without accidently press-  
ing any keys. Since the power  
button is on the  
outside of the phone, the phone can be turned on or  
off whether the phone is open or closed.  
7
 
Front, Side, and Top Views of the Phone  
8
 
1
2
Power  
Light  
turns power on and off (phone may  
be open or closed).  
lights red when phone is powered  
on or off and when there are  
incoming calls and messages.  
3
4
5
Volume/Scroll let you adjust the volume and scroll  
Keys through the menus.  
Data Connector provides connection to the car kit  
and other accessories.  
Antenna  
provides best voice quality when all  
the way up.  
6
7
Battery  
provides power to the phone.  
Smart Keys  
are used in context with the text  
display. The current operation of a  
Smart Key is defined by the word  
above it on the display.  
8
9
Clear  
/
clears the digits and/or text from  
the display.  
places and receives calls and  
activates network features (i.e. call  
waiting and three-way calling).  
10  
disconnects a call and/or returns to  
standby display.  
11 Smart Keys  
border and word that defines the  
Name Indicator current operation of the Smart Key  
.
12  
13  
14  
Envelope  
or  
allows quick access to text and  
voice mail notification messages.  
allow you to scroll through the  
menu options and displays.  
Info  
shows your phone’s number,  
provides additional information  
about the call record, and for added  
functionality.  
9
 
Display Indicators  
Display indicators are located at the top of the  
display. Different indicators appear based on the  
phone’s operating mode.  
Digital  
Indicates that you are  
Indicator receiving a digital signal.  
Signal  
Indicates current signal  
strength. More lines means  
better signal strength.  
No Service The phone is not receiving a  
signal from the system.  
In Use  
The call is in progress.  
The phone is in standby.  
No Icon  
Roaming The phone is outside of its  
home area.  
Message There is a text message, voice  
Received notification, or page waiting.  
Battery  
Indicates battery charge level  
status. The more black you  
see the greater the charge.  
10  
 
Using the Battery  
The phone comes with a rechargeable battery pack.  
The battery pack is shipped with approximately  
50% capacity so you can use it immediately after  
purchasing the phone. Remember to keep your  
battery charged in order to maximize the talk time  
and standby time.  
Removing and Installing the Battery  
To remove the battery:  
Press down on the battery release latch and  
simultaneously lift the battery up and out of the  
phone.  
11  
 
To install the battery:  
Place the battery into the opening at a 45° angle  
and rotate the battery down until the latch  
clicks.  
Turning the Phone On and Off  
Turning On  
Make sure that the charged battery pack has been  
installed in the back of the phone or that you have  
external power (using the cigarette lighter adaptor  
or car kit).  
Press the  
the phone is closed, the  
for approximately 3 seconds. If the phone is open,  
the button must be held for 1 second.  
button until the red light is lit. If  
button must be held  
Turning Off  
1. Press the  
button until “Powering Off” is  
displayed or until the red light flashes. If the  
phone is closed, the button must be pressed  
for approximately 3 seconds. If the phone is open,  
the button must be held for 1 second.  
2. Release the button.  
When the power is off, nothing displays on the  
screen.  
Note  
If the  
button is pressed for less than 1 second  
when open or 3 seconds when closed, the phone will  
not turn off.  
12  
 
Antenna  
Raise the antenna for best voice quality.  
Charging the Battery  
The battery charge level is shown at the top right of  
the display when the phone is open.  
13  
 
When the battery charge level becomes low, the low  
battery sensor will alert you by displaying the  
screen icon and sounding an audible tone. If the  
battery level becomes too low, the phone will switch  
off and any function in progress will not be saved.  
Batteries may be charged using the standard  
desktop charger, optional travel charger, or ciga-  
rette lighter adaptor.  
Using the Desktop Charger  
Warning: Only use the desktop charger and AC adaptor  
provided with the phone. Using the wrong adaptor may  
cause damage.  
1. Plug one end of the AC adaptor into the charger  
holder and the other end into a wall outlet.  
2. Insert the battery pack in the rear of the charger  
or the phone with installed battery pack into the  
front of the charger or both simultaneously. You  
should then see a red light on the charger indi-  
cating that the battery is being charged.  
If completely discharged, the battery will charge in  
approximately 1 to 2 hours. If you leave the phone  
on while it is in the desktop charger, the battery  
will take longer to charge.  
You do not need to completely discharge the battery  
before charging. Unlike other battery systems, there  
is no memory effect which could degrade the  
battery’s performance.  
14  
 
BASIC FUNCTIONS  
Function Keys  
The following keys perform these functions when  
pressed during most procedures:  
Clears characters from the screen.  
Press once to erase one digit or charac-  
ter. Press and hold to erase all digits.  
When in a menu, press once to go back  
one level or press and hold to go back  
to the standby display.  
Disconnects a call. Also exits all the  
way out of a menu back to the phone’s  
most basic standby display without  
changing the setting.  
Provides hyphens, and hard or timed  
pauses when programming a number  
in memory; accesses special characters  
when in text mode; and also provides  
additional information and functions.  
/
Places a call.  
Left and right Smart Keys below the  
display select whatever option is  
directly above them.  
/
Scrolls through phone book entries  
and menu items.  
... Enters numbers and characters, and  
chooses menu items.  
15  
 
Making a Call  
First, check that your phone is on. The display  
indicators should be visible on the screen.  
1. Open the phone.  
2. Enter the phone number.  
3. Press  
/
. If the phone is locked, the  
number is restricted, or there is another problem,  
you will see a help message.  
4. Press  
call.  
or close the phone to disconnect the  
Correcting Dialing Mistakes  
Press  
to erase one digit at a time. Press and hold  
for at least one second to delete all digits or  
letters.  
Getting Your Own Phone Number  
If your phone has been activated, you can see your  
phone’s number by doing the following:  
1. Turn the phone on. Open the phone if it is closed.  
2. Press  
.
16  
 
Receiving Calls  
Your phone must be powered on to receive calls. The  
phone may be open or closed.  
If the phone is open:  
Press any key (except the  
volume keys) to answer.  
button or the  
If the phone is closed:  
Open the phone (unless the “Call Answer”  
feature is set to “by keypress” for caller ID  
purposes.  
To disconnect the call:  
Press  
or close the phone.  
To silence the ringer when the phone is closed:  
If you choose not to answer an incoming call or  
just want to silence the ringer, press the  
button for less than 1 second.  
Call Waiting  
Your service provider may offer call waiting. When  
you are in a call, you may hear two beeps indicating  
another incoming call.  
1. Press  
2. Press  
/
/
to access this call.  
again to toggle between the  
two callers.  
17  
 
Three-way Calling  
Your service provider may offer three-way calling.  
1. Press  
/
to connect the three parties.  
See your service provider for more instructions.  
Redialing Calls  
Redialing Last Outgoing Number  
1. Press  
/
to redial the last outgoing call.  
Redial Last Ten Calls  
You can redial any of your last ten calls through the  
call history list. See the Phone Book section.  
Adjusting Volume  
The volume keys on the side of the phone can be  
used for three different functions:  
• Adjusting earpiece volume when you are in a call  
• Adjusting ringer volume when the phone is not in  
use  
• Scrolling through menu items when you are  
using the menus or phone book features  
• The  
button can be used to silence the ringer  
(or deactivate the vibrator) when you need to  
silence an incoming call alert.  
Emergency Dialing  
You can place calls to 911 or one of the other three  
emergency numbers that are in your phone book  
even if your phone is locked or restricted. The  
service provider may have preprogrammed the  
three emergency numbers for you.  
18  
 
Making Emergency Calls  
1. Press  
or one of the other three  
emergency numbers.  
2. Press  
/
.
Saving and Editing Emergency Numbers  
1. Press the  
key under [MENU].  
2. Press  
for Security menu.  
3. Enter the lock code. The lock code is typically set  
to either 0000 or to the last four digits of the  
phone’s number.  
4. Press  
for Emergency #.  
5. Press the  
key under [EDIT] to make changes  
to the first emergency number.  
or  
Press the  
key under [NEXT] to see the next  
emergency number.  
Signal Strength  
The quality of the call depends on the signal  
strength in your area. The phone displays the  
current strength as a number of bars next to the  
signal strength icon; the more bars, the better the  
signal.  
19  
 
If the signal is poor, raise the antenna all the way  
for best performance. If you are in a building, the  
reception may be better near a window.  
Power Save Mode  
The power save mode feature will automatically  
turn on if the phone has not been able to acquire  
any systems after 15 minutes of searching. While  
this feature is active, the phone’s battery charge is  
conserved. The phone will automatically recheck for  
service periodically. To manually force the phone to  
recheck for service, press any key. A message on  
the display will indicate when the phone is  
operating in power save mode.  
20  
 
PHONE BOOK FEATURE  
The Two Phone Book Types  
You should be familiar with the basic functions of  
the phone before using the phone book. There are  
two types of phone books: primary phone book  
memory and recent call history list.  
Primary Phone Book Memory  
The phone has 99 general use phone book memory  
locations where you can store entries of up to 32  
digits with an associated name up to 12 characters.  
Recent Call History List  
The phone keeps a list of the last 10 non-repeated  
calls you made, accepted, missed, or added.  
Depending on the operating mode and available  
features, each entry may contain the phone number,  
name, and time stamp (which indicates when the  
call occurred).  
You may see one of the following entries:  
MISSED  
Indicates an unanswered incoming  
call if caller ID is available.  
CALLED BY Indicates a call you received and  
answered if caller ID is available.  
CALL TO  
ADDED  
Indicates a call you placed.  
Indicates that the number was  
added using the scratch pad feature.  
21  
 
• While viewing a call history entry, press  
to  
show additional information available such as  
the time stamp.  
Saving Numbers to Your Primary Phone Book  
Memory locations 1 to 9 should be used for one-  
touch dial or most commonly used phone numbers.  
1. Enter the phone number that you want to save.  
[SAVE] will then appear.  
2. Press the  
key under [SAVE].  
3. Enter a name to go with the number.  
Press the key labeled with the letter you want.  
Press it once to get the first letter on the key,  
twice to get the second, three times to get the  
third, and four times for the number (or fourth  
letter). If you miss the letter you want, keep  
pressing the key until it reappears. Press  
correct any mistakes. Two seconds after you  
to  
choose a character, the cursor moves to the right  
one character. Repeat this process until the name  
is entered.  
4. Press the  
key under [OK] to save the name  
and move to the next step.  
22  
 
5. Press the  
key under [OK] to store the number  
in the first available storage location.  
or  
Enter a specific, two digit location number.  
6. Press the  
key under [OK] to save the number.  
or  
Press the  
key under [NEXT] and then the key  
under [OK] to save the number as secret. (Secret  
numbers do not display on the screen.)  
Retrieving Numbers from your Phone Book  
Press the  
key under [BOOK] to access the phone  
book.  
Retrieving all Manually Stored Memory Locations  
1. Press the  
key under [BOOK].  
2. Press  
or or the volume keys to scroll  
through the memory list.  
23  
 
3. Press the  
key under [VIEW] to see what is in  
that memory location.  
4. Press the  
press  
key under [ERASE] or [EDIT] or  
to call.  
/
Retrieving One Entry by Memory Location Number  
1. Press the  
key under [BOOK].  
2. Enter the two digit memory location number.  
You will then see what is in that memory  
location.  
3. If occupied,  
/
to call or press the  
key under [ERASE] or [EDIT].  
Retrieving by Name Search  
1. Press the  
key under [BOOK].  
2. Press the  
key under [NAME].  
3. Enter the letter(s) that you want to look for.  
4. Press the key under [FIND].  
The phone then searches for names with those  
letters. You will see a list of matches.  
5. Press  
or  
or the volume keys to scroll  
through the list.  
6. Press the  
or  
key under [VIEW].  
Press  
/
to call.  
24  
 
Retrieving Recent Call History  
1. Press the  
key under [BOOK].  
2. Press the  
key under [CALLS].  
3. Press  
or  
or the volume keys to scroll  
through the last ten calls.  
4. Press to place a call.  
/
or  
Press the  
the call.  
key under [VIEW] to see specifics of  
key under [SAVE] to save the  
5. Press the  
number to a memory location.  
If the number already has a name associated with  
it, it is already entered into a memory location.  
While viewing an entry, press  
to show additional  
information available such as the time/date stamp.  
Retrieving by Part of Phone Number Search  
You can look for a phone number if you know at  
least three of the digits.  
1. Enter any three sequential digits from the phone  
number on the main screen..  
2. Press the  
key under [FIND].  
3. If there is a match, press  
or  
or the  
volume keys to scroll to desired entry.  
4. Press the  
or  
key under [VIEW] to see the entry  
to place a call.  
/
25  
 
Changing Your Phone Book  
Erasing a Stored Memory  
1. Press the  
key under [BOOK]. Recall and view  
the memory location.  
2. Press the  
key under [ERASE]. This will erase  
the name and number from the memory location  
leaving it free for a future entry.  
3. Press the  
key under [OK].  
4. “-erased-” will flash on the display to confirm  
that the entry has been erased.  
Editing a Stored Memory Location  
1. Recall the memory location.  
2. Press the  
3. Edit the number using the digit keys, and  
4. Press the key under [OK].  
key under [EDIT].  
.
5. Edit the name using  
or  
, the digit  
keys, and  
.
6. Press the  
key under [OK]. You are then  
prompted for a memory location.  
7. Press the  
key under [OK] to use the memory  
location listed or enter a new memory location.  
8. Press the  
key under [OK] to finish the editing  
process and store as a nonsecret entry.  
26  
 
Dialing Numbers from Your Phone Book  
You can make a call using any memory location  
either by speed dialing from the list or by pressing  
/
while viewing the full contents of the  
memory location.  
Speed Dialing  
You can quickly dial numbers that are saved in your  
phone’s phone book.  
1. Press the key(s) that correspond to the numeric  
memory location. Example: for memory location  
10, press the key under [BOOK], and then press  
.
2. Press  
/
. The phone will find the  
telephone number in its phone book, display it on  
the screen, and then dial it.  
One-touch Dialing  
One-touch dialing enables you to dial phone book  
entries through one key press (for locations 1 to 9)  
or two key presses (for locations 10 to 99).  
You can turn one-touch dialing on through the  
“One-Touch” item under the “Features” menu.  
For memory locations 1 to 9:  
Press and hold the appropriate key for at least  
one second.  
For locations 10 to 99:  
1. Press the first digit.  
2. Press and hold the key for the second digit.  
27  
 
Dialing from a Memory List  
1. Press the  
key under [BOOK].  
2. Press  
or to go to the memory loca-  
tion you want.  
3. Press  
/
.
Dialing from within a Memory Location  
While viewing any memory location, press  
.
/
Advanced Phone Book Features  
Pause Feature  
When you call automated systems (such as voice  
mail or credit card billing numbers), you often have  
to enter a series of numbers. Instead of entering the  
numbers by hand, you can store the numbers in  
your phone book separated by special characters  
called pauses. There are two kinds of pauses:  
• Hard Pauses– You have to press the  
key  
under [RESUME] to go to the next number.  
• Timed Pauses–The phone will send the next set  
of numbers after two seconds. Each additional  
timed pause will add two more seconds to the  
pause length.  
Storing a Number with Pauses  
1. Enter the number.  
2. Press  
3. Press  
.
for HardPause.  
28  
 
or  
Press  
for TimePause.  
4. Enter additional numbers (i.e., pin number,  
credit card number).  
5. Press the  
key under [SAVE].  
Note  
You can press  
for Hyphens. Hyphens are used  
for appearance only; the phone dials the number  
without any delays.  
Punctuation Characters for Name Entry  
You can use any of the 18 special characters while  
you are entering names during phone book storage  
or editing.  
1. Press  
during the “Enter Name” step.  
You will then see a list of characters.  
2. Press the  
or  
to see the other nine  
characters that you may choose from.  
3. Press the number next to the character that you  
want.  
4. Continue entering the name.  
29  
 
Case Changing During Name Entry  
When entering a name, you can use both upper and  
lower case letters.  
1. Press the  
key under [A->a] to change case.  
2. Enter letters.  
“Prepending” a Stored Number  
“Prepend” is used if you are out of your home  
system and need to add the area code to an existing  
phone book number. When a phone book entry, call  
history entry, or messages callback number shows  
up on the display, you can make additions to the  
beginning of the original number. However, you  
can’t edit the original number during “prepend.”  
To “prepend” a number:  
1. Recall a number in memory.  
2. Press any digits. Digits entered will prepend the  
recalled number.  
3. Press  
number.  
/
to dial the new, longer  
Making an Entry Secret  
You can set memory locations to “secret” (which  
hides the phone number and only displays the  
name). If you do not enter a name to go with the  
number, you will see the word “secret” in any  
memory displays or lists. “Secret” memory locations  
can only be deleted, not edited.  
30  
 
MENU FEATURE  
Main Menu  
This section describes the various menu items. An  
arrow to the right of the title indicates if there is  
more information before () or after (¯ ) that particu-  
lar number. The main menu looks like the following:  
Menus allow you to check or change the phone’s  
various features and settings. You may see the  
different menus using either the menu access  
method or the shortcut menu access method.  
Menu Access Method  
1. Press the  
key under [MENU].  
2. Press  
or to step forward or back-  
ward through the list of features.  
3. Press  
to go back one step.  
4. Press the number corresponding to the menu  
item that you want to select.  
5. Press the  
key under [NEXT].  
31  
 
or  
Press  
or  
to cycle through the pos-  
sible settings. A check mark indicates the current  
option selection.  
6. Press the  
7. Press  
key under [OK] to save the setting.  
to cancel without saving.  
Shortcut Menu Access Method  
Each menu feature can also be quickly accessed by  
pressing the key under [MENU] and the numbers  
on the desired menu screen. For example, when the  
shortcut is used, the phone displays the current  
menu item setting.  
Menu Item Descriptions  
1 Vibrate  
This feature allows you to change the alert during  
an incoming call. If set to “on” then the phone will  
vibrate when a call is first received. Additionally, if  
the ringer is also on then the phone will ring after  
vibration stops.  
2 Volume  
This allows you to adjust the ringer, key beep, and  
earpiece volume.  
1 Ringer  
Adjust ringer and new message  
alert volume with the or  
keys or volume keys. You  
can also adjust the ringer  
volume by pressing the volume  
keys on the side of the phone  
32  
 
only while the phone is in  
standby or is ringing. Possible  
settings: silent, escalating, low,  
M-, M+, high. Escalating means  
that the ringer volume will get  
progressively louder with each  
ring.  
2 Key Beep  
3 Earpiece  
Adjust the key beep volume (the  
sound the phone makes when  
the keys are pressed with the  
or  
keys or volume  
keys). Possible settings: silent,  
low, M-, M+, high.  
Adjust the earpiece volume with  
the  
or  
keys or  
volume keys. You can also adjust  
this during a call by pressing  
only the volume keys. Possible  
settings: low, M-, M+, high.  
3 Call Info  
This allows you to see the number and duration of  
various kinds of calls.  
1 Last Call  
Display duration of last call in  
minutes and seconds.  
2 Home Calls Display the total number of calls  
and time (minutes and seconds),  
of all calls made while in the  
home system (i.e., not roaming),  
since last reset. Press the  
under [ZERO] to reset.  
key  
33  
 
3 Roam Calls Display the total number of calls  
and time (minutes and seconds)  
of all calls made while roaming.  
Press the  
to reset.  
key under [ZERO]  
4 All Calls  
Display the total number of calls  
and time (minutes and seconds)  
including calls made while in the  
home system and while roaming.  
This is NOT resettable.  
4 Security  
You must enter the lock code to see what is in the  
security menu. Typical default values are either the  
last 4 digits of your phone number or 0000.  
1 Lock Mode Choose when you want the  
phone to lock. Possible settings:  
“on power up,” “now,” “never.”  
“Now” immediately locks the  
phone.  
When the lock code is entered,  
this is reset to “never.”  
“On power up” locks the phone  
when the phone is turned on.  
“Never” means that the phone is  
never locked.  
When locked, you can only make  
emergency calls or receive  
incoming calls. All other func-  
tions of the phone are disabled.  
If you forget your lock code,  
please call your service provider  
for help.  
34  
 
2 Restrict  
Set phone use restrictions to  
“yes” or “no.” If set to “yes,” you  
can only make calls to emer-  
gency numbers and phone  
numbers in locations 1 to 9.  
3 New Code  
Enter a new four digit lock code  
number.  
4 Emergency# Enter three emergency numbers.  
You can call these numbers and  
911 even when the phone is  
locked or restricted. If dialing  
the number, it must exactly  
match one of these programmed  
numbers for it to override the  
lock and restriction settings.  
5 Clear Calls Clear the call history  
information.  
5 Features  
1 Call Answer Select how a call is answered.  
Allows you to answer a call by  
either opening the phone or by  
pressing a key. This “by  
keypress” answering option  
allows you to decide whether or  
not to answer a call based on  
incoming caller ID information  
on the screen. Possible settings:  
“by keypress” “by opening.”  
2 Auto Retry Set the length of time the phone  
waits before automatically  
redialing a number when the  
system is busy. Possible settings:  
35  
 
“every 60 seconds,” “every 30  
seconds,” “every 10 seconds,”  
“off.”  
3 Scratch Pad Store phone numbers during a  
call. These numbers are added to  
call history.  
4 Mute  
Switch the microphone on and  
off while in a call. When the  
microphone is off, the other  
party can not hear you.  
5 Key Beep  
6 One-touch  
7 Privacy  
Set key beep length and touch  
tone playback speed. Possible  
settings: “long,” “normal.”  
Enable/disable one-touch phone  
book memory dialing. Possible  
settings: “enable,” “disable.”  
Set the voice privacy feature for  
CDMA calls. Possible settings:  
“enhanced,” “standard.”  
CDMA offers inherent voice  
privacy. Check with your service  
provider for availability of the  
enhanced voice privacy mode.  
During a call, if active, you will  
see an inverse “P” on the same  
line as the call time.  
8 Ringer TypesSet the sound that the phone  
will make when a call comes in.  
Possible settings: “standard,”  
options 1 to 4.  
36  
 
6 Display  
This allows you to choose what you see on the  
display.  
1 Backlight  
Choose the setting of the LCD  
and keypad backlighting. Pos-  
sible settings: “on,” “when open,”  
“always off,” “10 seconds,” “30  
seconds.” “10 seconds” turns the  
backlight off 10 seconds after the  
last key was pressed. “30 sec-  
onds” waits 30 seconds after the  
last key press. “When open”  
means that the backlight is on  
when the phone is open. “Al-  
ways off” means that the back-  
light is never on.  
2 Banner  
A banner enables you to person-  
alize your phone by displaying  
your name, for example. Enter  
the banner (up to 12 characters)  
that will display on the top line  
when the phone powers up and  
when it is in standby. Press the  
key under [EDIT] to make  
changes to the existing banner.  
Enter the characters the same  
way you do for the phone book.  
3 Show Time Choose whether to display date  
and time. Possible settings:  
“yes,” “no.”  
4 Auto Hyphen Possible settings: “on,” “off.”  
When on, automatically inserts  
hyphens to be consistent with  
U.S. phone numbers.  
37  
 
7 Alerts  
1 Fade  
Set an alert to inform you when  
you have lost a call or lose  
service. Possible settings: “on,”  
“off.”  
2 Minute  
3 Service  
Set minute minder to beep every  
10 seconds before the minute  
while in a call.  
Set an alert to beep when a  
network service parameter  
changes.  
8 System  
This allows you to set some of the PCS network  
settings.  
1 Set NAM  
Select the phone’s NAM (Num-  
ber Assignment Module) if the  
phone is registered with mul-  
tiple service providers.  
2 Auto NAM Allows the phone to automati-  
cally switch to one of the pro-  
grammed NAMs if it is operating  
in the corresponding service  
provider area.  
3 Activation  
If supported by your service  
provider, this item enables you  
to initiate over-the-air activation  
in order to get your phone  
working through a few key  
presses.  
38  
 
PAGING, MESSAGING,  
AND VOICE MAIL  
This feature allows your phone to receive messages  
when it is turned on. A single key, , allows you to  
access your messages while a four line display  
provides for easy viewing. While reading a message,  
you can return a call to the callback number pro-  
vided in the message simply by pressing  
twice.  
/
Messages are stored in the phone’s memory and are  
not erased when the phone is turned off. The phone  
has the capability of storing up to 23, 40 character  
messages. However, the number of messages that  
can be stored will be reduced if messages are  
greater than 40 characters.  
Note  
Check with your service provider regarding the  
availability of this feature. The information con-  
tained in a message, such as time stamp and call-  
back number, depends on the mode the phone is  
operating in and the service provider’s network  
capabilities.  
This phone supports three types of messages:  
Message  
Page  
typically contains text  
typically contains digits  
39  
 
Voice Mail  
Notification  
indicates the number of new  
voice mail messages that your  
voice mailbox has. You must call  
your voice mail number to listen  
to these messages.  
New Message Alert  
The phone will notify you of a new message by a  
display on the screen, five short beeps (if enabled), a  
flashing red light on the earpiece, and by turning on  
the  
icon on the top of the display. If a message  
icon will flash. In  
is marked URGENT, the  
addition, the first line of the display will contain  
asterisks (*) on each side of the label for example, “*  
MESSAGE! *”.  
The phone will then be returned to the display that  
was present before the alert. The red light will  
continue to flash and a reminder beep will occur  
every two minutes until the new message is ac-  
knowledged.  
40  
 
Viewing Pages and Messages  
These messages may consist of a time stamp, a  
callback number, a name (if the callback number  
matches a phone number stored in a memory  
location), and text. They are accessed as text type  
messages as shown below.  
Reading New Messages  
1. Press . The display will then show the number  
of new messages.  
2. Press the  
key under [TEXT]. You will see the  
messages in the order they were received except  
for all urgent messages, which will be displayed  
first.  
Messages will automatically scroll page by page.  
To manually scroll through the message line by  
line, press  
or  
. At the end of the  
message, the Smart Key options will be [ERASE]  
and [NEXT].  
3. Press the  
key under [ERASE] to erase the  
message and go to the next message.  
or  
Press the  
key under [NEXT] to keep the  
message in memory and go to the next message.  
4. Press to view the callback number  
/
provided in the message.  
5. Press  
/
again to place a call to the  
callback number.  
41  
 
Note  
When there are no new messages, the phone will  
display a list of previous messages.  
If the callback number has not been previously  
stored into one of the phone’s memory locations, you  
can do so by pressing the  
key under [SAVE].  
If a name appears with the callback number, the  
number is already stored in a phone memory  
location.  
After storing the number in phone book memory,  
the phone returns to the callback screen. Press  
/
to place the call. You may prepend  
digits, such as an area code, simply by pressing the  
desired digits before pressing  
/
.
Reading Previous Messages  
1. Press  
.
2. Press the  
key under [TEXT]. This displays the  
list of previous messages. Each line will show the  
first 11 characters of the messages.  
3. Press  
or  
to select the message.  
4. Press the  
key under [ERASE]. This erases the  
message and goes to the next message.  
or  
Press the  
key under [VIEW]. This lets you  
view the message.  
5. While viewing a message or with the arrow  
pointing to the desired message, you can press  
42  
 
/
to place a call to the callback num-  
ber provided in the message. After you see the  
callback number on the display, press  
again to place the call.  
/
6. Press the  
key under [QUIT]. This brings you  
back to the list of previous messages.  
Voice Mail Notifications  
Voice mail notification indicates the number of new  
voice mail messages in your mailbox. Only the most  
recent voice mail notification will be stored in the  
phone; previous messages will be overwritten. You  
must call your voice mail service to retrieve these  
messages.  
Reading Voice Mail Notification Messages  
1. Press  
.
2. Press the  
key under [VOICE] to view the  
entire message. The phone will automatically  
scroll page by page. To manually scroll, press  
or  
.
3. Press  
/
to call back your voice mailbox  
if your voice mail system has sent a callback  
number.  
or  
Press the  
key under [QUIT] when you get to  
the end of the message.  
or  
43  
 
Press the  
message and turn the  
key under [ERASE] to erase the  
icon off. Usually, this is  
not required because the network will command  
the phone to automatically turn the icon off when  
you have no new messages.  
Low Memory Warning  
The phone will alert you when the amount of  
available message memory is less than 25%. Al-  
though the phone can still receive new messages,  
you should erase messages you no longer need to  
avoid running out of memory.  
Out of Memory Warning  
When the phone has no more available message  
memory, it can no longer accept new messages.  
When this occurs, the phone will display an “Out of  
Memory” message.  
44  
 
ACCESSORIES  
You can purchase a number of accessories for your  
Q Phone, including batteries, chargers, and a  
hands-free car kit. For our full line of accessories,  
visit our Accessories Store at  
Or order by phone at  
(800) 211-1537 or (510) 683-4004  
45  
 
PHONE SAFETY  
AND CARE  
Background  
The hand-held portable telephone is one of the most  
exciting and innovative electronic products ever  
developed. It let’s you stay in touch wherever you  
go.  
Your telephone is a radio transmitter and receiver.  
When it is ON, it receives and also sends out radio  
frequency (RF) energy. When you use your phone,  
the system handling your call controls the power  
level at which your phone transmits. The power  
level can range from 0.006 of a watt to 0.2 of a watt.  
Exposure to Radio Frequency Energy  
In August 1996, the Federal Communications  
Commissions (FCC) adopted RF exposure guidelines  
with safety levels for hand-held wireless phones.  
Those guidelines are consistent with the safety  
standards previously set by both U.S. and interna-  
tional standards bodies:  
ANSI C95.1 (1992) American National Standards  
Institute, NCRP Report 86 (1986) National Council  
on Radiation Protection and Measurements,  
ICNIRP (1996) International Commission on Non-  
Ionizing Radiation Protection.  
The design of your phone complies with the FCC  
guidelines (and those standards).  
46  
 
For Best Performance  
To properly operate the phone and maintain safe  
and satisfactory service, follow these rules:  
• Extend the antenna fully.  
• Hold the phone with the antenna up and over  
your shoulder.  
• Do not hold the phone antenna at any time.  
Contact with the antenna affects call quality and  
may cause the phone to operate at a higher  
power level than otherwise needed.  
• Do not use the phone with a damaged antenna.  
• Speak directly into the mouth piece.  
• Use the phone when the car is stopped.  
Avoid exposing the phone and accessories to rain or  
liquid spills. If the phone gets wet, turn the power  
off immediately and remove the battery pack. If the  
phone is inoperable, then return it to the dealer for  
service.  
Only authorized personnel should install or service  
the phone and its accessories. Faulty installation or  
service may be dangerous and may invalidate the  
warranty.  
Antenna Care  
Use only the supplied or an approved replacement  
antenna. Unauthorized antennas, modifications, or  
attachments, could damage the phone and may  
violate FCC regulations.  
47  
 
Caring for the Battery  
For best battery performance, follow these  
guidelines:  
• Only use Kyocera battery packs, model numbers  
TABAT0201 or TABAT0202, and Kyocera charg-  
ers, model numbers TADTC0201 or TATVL0201.  
Do not use any other battery pack or charger.  
Kyocera ’s chargers are designed to maximize the  
battery life performance.  
• Do not charge the battery pack in temperatures  
outside of 32°F to 122°F (0°C to 50°C) because  
damage could occur.  
• Do not use the battery charger in direct sunlight  
or in places with high humidity such as the  
bathroom.  
• Never dispose of the battery pack by a fire.  
• Keep the metal contacts at the top end of the  
battery pack clean.  
• Do not attempt to disassemble or short circuit the  
battery pack.  
• You may need to recharge the battery if it has not  
been used for a long time.  
• Replace the battery when it no longer provides  
acceptable performance. The battery pack may be  
recharged hundreds of times before it will need to  
be replaced.  
• Do not store the battery pack for long periods in  
places where high temperatures frequently occur.  
Follow these storage rules:  
less than 1 month: -4°F to 140°F (-20°C to 60°C )  
more than 1 month: -4°F to 113°F (-20°C to 45°C)  
48  
 
Driving Safety  
Talking on the phone while driving is extremely  
dangerous and is illegal in some states. Remember,  
safety comes first.  
Check the laws and regulations on the use of PCS  
phones in the areas where you drive. Always obey  
them.  
Also, if using your phone while driving, please:  
• Give full attention to driving. Driving safety is  
your first responsibility.  
• Use hands-free operation, if available.  
• Pull off the road and park before making or  
answering a call if driving conditions require.  
If you must use the phone while driving, please use  
one-touch, speed dialing, and auto answer modes.  
For vehicles equipped with an air bag: An air bag  
inflates with great force. DO NOT place objects,  
including both installed or portable wireless equip-  
ment, in the area over the air bag or in the air bag  
deployment area. If in vehicle wireless equipment is  
improperly installed and the air bag inflates,  
serious injury could result.  
FAILURE TO FOLLOW THESE INSTRUCTIONS  
MAY LEAD TO SERIOUS PERSONAL INJURY  
AND POSSIBLE PROPERTY DAMAGE.  
49  
 
Other Safety Guidelines  
Electronic Devices  
Most modern electronic equipment is shielded from  
RF energy. However, certain electronic equipment  
may not be shielded against the RF signals from  
your wireless phone.  
P a cem a k er s. The Health Industry Manufacturers  
Association recommends that a minimum separa-  
tion of six (6") inches be maintained between a  
handheld wireless phone and a pacemaker to avoid  
potential interference with the pacemaker. These  
recommendations are consistent with the indepen-  
dent research by and recommendations of Wireless  
Technology Research. Persons with pacemakers:  
• Should always keep the phone more than six  
inches from their pacemaker when the phone is  
turned ON.  
• Should not carry the phone in a breast pocket.  
• Should use the ear opposite the pacemaker to  
minimize the potential for interference.  
• If you have any reason to suspect that interfer-  
ence is taking place, turn your phone OFF  
immediately.  
Hearing Aids. Some digital wireless phones may  
interfere with some hearing aids. In the event of  
such interference, you may want to consult your  
service provider (or call the customer service line to  
discuss alternatives.)  
Other Medical Devices. If you use any other  
personal medical device, consult the manufacturer  
50  
 
of your device to determine if they are adequately  
shielded from external RF energy. Your physician  
may be able to assist you in obtaining this  
information.  
Turn your phone OFF in health care facilities when  
any regulations posted in these areas instruct you to  
do so. Hospitals or health care facilities may be  
using equipment that could be sensitive to external  
RF energy.  
Vehicles  
RF Signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its repre-  
sentative regarding your vehicle. You should also  
consult the manufacturer of any equipment that has  
been added to your vehicle.  
Posted Facilities  
Turn your phone OFF in any facility where posted  
notices so require.  
Aircraft  
FCC regulations prohibit using your phone while  
the plane is in the air. Switch OFF your phone  
before boarding an aircraft.  
Blasting Areas  
To avoid interfering with blasting operations, turn  
your phone OFF when in a “blasting area” or in  
areas posted: “Turn off two-way radio.” Obey all  
signs and instructions.  
51  
 
Potentially Explosive Atmospheres  
Turn your phone OFF when in any area with a  
potentially explosive atmosphere and obey all signs  
and instructions. Sparks in such areas could cause  
an explosion or fire resulting in bodily injury or  
even death.  
Areas with a potentially explosive atmosphere are  
often, but not always, clearly marked. They include  
fueling areas such as gas stations; below deck on  
boats; fuel or chemical transfer or storage facilities;  
vehicles using liquefied petroleum gas (such as  
propane or butane); areas where the air contains  
chemicals or particles, such as grain, dust, or metal  
powders; and any other area where you would  
normally be advised to turn off your vehicle engine.  
52  
 
WHERE TO  
FIND HELP  
Your Service Provider  
For questions about your phone and phone service,  
contact your service provider first. Your service  
provider’s customer support department can answer  
questions about your phone, phone bill, call  
coverage area, and specific features (such as call  
forwarding or voice mail) available to you.  
Your Phone Documentation  
If you have questions about the features of the  
phone, refer to this guide and other materials  
provided with your phone. To view or download the  
most current version of this user’s guide, visit us at  
Kyocera Technical Support  
If you have additional questions, contact the  
Kyocera Wireless Customer Care Center in any of  
these ways:  
U.S. and Canada: (800) 349-4478  
Other Countries: (858) 882-1400  
Email: [email protected]  
53  
 
Before requesting support, please try to reproduce  
and isolate the problem. When you contact support,  
be ready to provide the following information:  
The name of your service provider  
The actual error message or problem you are  
experiencing  
The steps you take to reproduce the problem  
The Electronic Serial Number (ESN) and Part  
Number (MCN) of the phone. The ESN usually  
starts with a “B” and the MCN usually starts  
with a "61-." You will find these numbers inside  
the battery cover of your phone.  
54  
 
INDEX  
A
AC adaptor 14  
accessories 6, 47  
aircraft 51  
alerts 38  
fade 38  
minute 38  
service 38  
setting 38  
answering a call 7, 49  
Antenna 9, 13  
antenna 20, 47  
Auto NAM 38  
automatic hyphenation 37  
automatic redial 6, 35  
automatic retry 35  
automatic scrolling 41, 43  
B
backlight 37  
banner 37  
battery  
care 48  
charge 20  
charging 13, 14  
installing 11  
level indicator 10, 14  
use 11  
best performance 20, 47  
blasting areas 51  
55  
 
C
call history 18, 21, 25, 30, 35, 36  
call info 33  
call waiting 9, 17  
calls  
credit card 28  
dialing 27, 28, 35  
ending 9  
incoming 9, 17, 21, 34  
making 16, 19, 49  
receiving 17  
redialing 18, 35  
restrictions 35  
roaming 10, 34  
three-way 9, 17  
car kit 12  
CDMA 6, 36  
cigarette lighter adaptor 12, 14  
clear  
calls 35  
clear digits 15  
Code Division Multiple Access 6, 36  
correcting dialing mistakes 16  
D
dialing calls 18, 27, 36  
dialing from memory location 28  
digital system 10  
display 6  
display features 20, 26, 37  
display indicators 10, 16  
driving safety 49  
E
earpiece 17, 18, 32, 33  
editing 29  
memory 26  
56  
 
numbers 19  
emergency numbers 18, 19, 34, 35  
END key 9  
ending a call 9  
entering  
a number 16, 22, 24, 28, 35  
letters 24  
lock code 19, 34, 35  
lower case letters 30  
name 22  
punctuation 29  
explosive atmospheres 52  
F
fade alert 38  
features 6, 9, 18, 21, 28, 31, 35  
frequency 46  
Functions 15  
functions 15, 18  
I
incoming calls 9, 21, 34  
K
key beep volume 33  
keypad lock 6, 7  
L
last ten numbers dialed 18, 25  
lock code 34, 35  
low battery 14  
M
manual pauses 28  
memory  
clearing 26  
editing 26  
57  
 
effect 14  
locations 6, 21, 24, 25, 27, 30  
storage 39  
menu  
item descriptions 32–54  
method 31  
options 31  
shortcuts 32  
message  
text 10  
message key 9  
messages 39–54  
minute alert 38  
mute 36  
muting voice 36  
N
NAM 38  
no service 10  
Number Assignment Module 38  
O
one-touch dialing 27, 36  
own phone number 16  
P
pages 10  
pause dialing 28  
performance tips 47  
phone book 21  
advanced features 28  
dialing from 27, 36  
editing 26  
saving numbers to 22  
phone number  
viewing your own 16  
power 46  
58  
 
POWER key 9  
power key 9  
power save mode 20  
powering off 12  
powering on 12  
R
radio frequency energy exposure 46  
recalling last number dialed 18  
recalling previously dialed numbers 25  
Receive Signal Strength Indicator 10, 19  
receiving calls 9, 17  
receiving messages 40  
red light 14, 40  
redial 18  
system busy timer 35  
review last number dialed 18  
ringer volume 18, 32  
RSSI 10, 19  
S
safety 49, 50  
scratch pad 21, 36  
scroll  
through messages 43  
through stored names 24  
through stored numbers 25  
scroll keys 9  
searching  
for names 24  
for numbers 24, 25  
secret numbers 30  
signal strength 10, 19  
Smart Keys 9, 15  
speed dial 6, 27, 49  
standby time 11  
storing  
names with numbers 22  
59  
 
numbers 19, 22–23  
secret numbers 30  
T
talk time 11  
timer  
last call 33. See also call info  
roaming 34. See also call info  
total 34. See also call info  
travel charger 14  
V
voice mail 9, 43  
volume  
earpiece 18, 33  
key beep 33  
keys 9  
ringer 18, 32  
60  
 

Lenovo Laptop 9691 User Manual
Lexicon Speaker System Lambda Desktop Recording Studio User Manual
Linksys Network Card WAP200 User Manual
Linksys Switch FESWSK05 v3 User Manual
MABIS Duro Med Blood Pressure Monitor 04 255 001 User Manual
Magnavox TV VCR Combo 27ms3404 17 User Manual
MaxTech Computer Monitor XT4861 User Manual
Maytag Cooktop MER7765WB0 User Manual
Melissa Styling Iron 631 066 User Manual
Meridian Audio VCR Native Rate Series User Manual