KH4070
KH4069
KH4063
ꢀ Table lamps
Operating instructions
KH 4063 / 4069 / 4070
Table lamp
1. Intended Use
4
4
4
4
5
2. Technical Data
3. Safety Instructions
4. Operating elements
5. Starting Up the Device
Inserting the light bulb
Setting up and sw itching on
5
5
6. Cleaning and care
7. Disposal
5
5
5
8. Service
Read the operating instructions carefully before using the appliance for the first
time and preserve this booklet for later reference. Hand over the manual to anyone,
whom you pass on the appliance to.
- 3 -
ꢀ
KH 4063 / 4069 / 4070
Table lamp
To prevent fire hazards and the risk of
injury:
1. Intended Use
•
Never touch the table lamp or the
lamp shade while it is switched on.
Make sure that the table lamp is
switched off and has cooled down,
before you touch it.
While setting up the table lamp,
make sure that it is at a minimum
distance of 0.5 meters from illumi-
nated objects.
This table lamp is meant to be used in
dry areas and indoors.
It is not intended for outdoor use and
not for use in commercial or industrial
areas.
•
2. Technical Data
•
•
•
Never cover the lamp shade, and
allow air to circulate freely around
and inside the table lamp.
Always place the table lamp on an
even surface. Otherwise, it might
tip over and cause fire.
Operating voltage : 220-240 V~, 50 Hz
Light bulb :
60 W - E27:
(Not included)
Maximum
power rating :
Protection class:
1 x 60 W
II
Never leave the table lamp unsuper-
vised when in operation.
3. Safety Instructions
4. Operating elements
To avoid life-threatening electric shocks:
³ Fastening ring
•
Only connect the table lamp to a
power socket with a line voltage of
220-240 V ~, 50 Hz.
· Lamp shade
» Lamp socket
¿ Power cord with cord switch
•
•
Do not bend or squeeze the power
cord.
To disconnect, always pull out the
plug at the power socket, do not
pull at the power cord.
•
Never use the table lamp in proximity
of water or in damp cellar areas.
Protect the table lamp from moisture
and dirt.
•
•
Before cleaning, or if there is a power
supply fault, pull the plug out of the
power socket.
If the power cord is damaged, have it
repaired by a qualified expert before
using the table lamp again.
- 4 -
ꢀ
KH 4063 / 4069 / 4070
5. Starting Up the Device
6. Cleaning and care
ƽ Danger!
ƽInWsaerrtniinngg!t:he light bulb
•
Before cleaning the table lamp:
- Switch off the table lamp,
- pull out the plug from the power
socket and
•
Always use a bulb of max. 60 W and
E27 thread.
•
Before inserting or replacing the
lightbulb:
- let the table lamp cool down
completely.
- Switch off the table lamp,
- pull out the plug from the power
socket and
- let the table lamp cool down
completely.
•
Never immerse the appliance in water
or other liquids while cleaning.
Clean the desk lamp with a dry,
fluff-free cloth.
Never use solvents for cleaning, to
avoid damage to the tabel lamp.
➭
•
➭ Screw the fastening ring ³ off the
lamp socket ».
➭ Place the lamp shade · with the
small opening facing down onto the
lamp socket ».
➭ Screw the fastening ring ³ back
onto the lamp socket » until the
lamp shade · is firmly in place.
➭ Carefully screw the light bulb into
the lamp socket». Make sure it is
correctly screwed in.
7. Disposal
Never dispose off the table lamp with
normal household waste. Contact your
local town council or regional authority
for information about how to dispose
of the appliance in an appropriate,
environmentally-friendly manner.
ƽ Warning!
The light bulb is not included in the
package contents.
Before disposing of the appliance,
you can prevent accidents to children
by detaching the power plug, thus
rendering it unusable.
Setting up and sw itching on
➭
Place the table lamp on an even
surface.Keep illuminated objects
at a minimum distance of 0.5 m.
Push the power plug into the power
socket.
8. Service
➭
➭
ꢀKompernass Service United Kingdom
Alpine House, Premier Business Park
Long Street, Walsall
West Midlands, WS2 9DY
Tel.:08707/876177
Switch the table lamp on and off
by means of the cord switch.
Fax:01922/725417
e-mail: support.uk@kompernass.com
- 5 -
ꢀ
UK
Kompernaß GmbH · Burgstrasse 21 · D-44867 Bochum
ID No.: KH4063/4069/4070-06/05-V1
|