KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 1
UK
Kompernaß GmbH · Burgstrasse 21 · D-44867 Bochum
ID No.: KH 2255-09/06-V1
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 3
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 4
e-bench KH 2255
k
l q w e
j
h
r
t
y
u
g
f
i
o
d
s
a
;
2)
2!
2@
2#
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 3
CD Clock Radio
Safety information
4
5
Delivery Contents
Intended Usage
5
Technical Data
5
Operating elements
Commissioning
6
6
Battery Back-up System in Case of Power Failures
Setting the Time
6
7
Radio operation
7
Use of the CD Player
Further Functions of the CD Player
Setting the Alarm Time and Alarm Type
Sleep timer
7
8
8
9
Cleaning
10
10
10
Disposal
Warranty & customer service
Read the operating instructions carefully before using the appliance for the first
time and preserve this booklet for later reference. Pass the manual on to whom-
soever might acquire the appliance at a later date.
ꢀ
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 4
CD Clock Radio
Ꮩ Danger - Laser Beams!
The appliance is fitted with a
„Class 1 Laser“.
Safety information
• Never open the device.
• Never attempt to repair the device.
There is invisible laser radiation
inside the device.
• Avoid all direct optical contact
with the laser beam, it could lead
to serious eye injuries.
ƽ Important!
This clock radio employs a laser
beam. In order to avoid any risk
of injury or accident due to this
laser beam, the appliance may only
be opened by qualified specialists.
The appliances complies with the
international safety regulations
and the Directives of the European
Community. It also complies with
the currently applicable standards
on electrical safety and electro-
magnetic compatibility (EMC).
ƽ Warning:
In order to avoid the risks of fire
and electric shock, the appliance
must not be exposed to rain or
moisture. The ventilation openings
must not be blocked or covered.
ƽ Caution:
ƽ Important:
In order to avoid the risk of electric
shock, the cover of the appliance
must not be removed. There are no
parts that can be serviced inside the
appliance. Always contact qualified
specialists in the event of problems
or faults.
•
•
Do not throw batteries into the fire.
Do not immerse the device in water
and avoid splashes and droplets of
water entering the appliance. Do not
place any water/filled vessels (such as
e.g. flower vases) on the appliance.
ƽ Electrical Fast Transient (Burst)
Remark:
Ꮨ This symbol warns the user of
hazardous voltages inside the
appliance.
In case of misfunction due to
electrical fast transient (Burst),
just reset the product (reconnect
of power source may be required)
to resume normal operation.
ƽ This symbol is intended as a warning
that personal injury can occur if the
information given in the operating
instructions for the device is not
strictly observed.
ƽ ESD Remark:
In case of misfunction due to
electrostatic discharge just reset
the product (reconnect of power
source may be required) to resume
normal operation.
- 4 -
ꢀ
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 5
ꢀ A case of electrostatic discharge
occurs, for example, should someone
wearing shoes with plastic soles
Intended Usage
• This device is suitable for the recep-
tion of radio stations and the playing
of audio CDs and is equipped with
individually variable alarm functions.
• Any other use or modification of the
appliance is considered improper use
and may present significant risks of
accidents.
walk over a carpet that also contains
plastic elements. Through the friction
of the shoe soles on the carpet a
charge is created in the body which
discharges itself as soon as one touches
an electricity conducting object, such
as for example a door knob or the
bodywork of a motor vehicle. Direct
contact is not required to effect a
discharge. It is sufficient to approach
the conducting item to within a few
centimetres. The charge can the dis-
charge itself over an electric arc. A
discharge is thus also possible through
plastic housing components.
• The manufacturer accepts no liability
for improper use.
Technical Data
Power supply:
Backup battery: 2x 1.5 V Type AA bat-
tery (not included in
230-240 V ~ 50 Hz
the scope of supply)
Delivery Contents
CD player:
Frequency range
(+/- 3dB) 100 Hz to
16 kHz
CD Clock Radio
Operating Instructions
Warranty card
Laser:
Ꮩ = 760 nm
Pmax = 0.4 mW
FM 87,5 - 108 MHz
AM (MW)
Radio:
530 - 1600 kHz
- 5 -
ꢀ
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 6
Operating elements
Commissioning
Button STOP/TIME
CD compartment
This CD clock radio is operated with
230 - 240 Volt alternating current (AC),
50 Hz. It is additionally equipped with
a back-up system for the event of power
failures, for which two 1,5 V block batte-
ries (not included in the scope of supply)
have to be inserted.
q
w
e
Button Skip/Fast Search
forwards ꢁ/ Hour
Button PLAY MODE
Indicator light Repeat
Buttons ALARM I and ALARM II
Indicator light Sleep
Button SLEEP
Indicator light Random
Button SNOOZE
Tuning display
r
t
y
u
i
o
a
s
d
f
g
1%
j
➩ Insert the plug of the power lead into
a suitable plug socket (AC voltage).
➩ Place the batteries into the battery
compartment on the underside of
the appliance.
Volume display
Button ON/OFF
Indicator light ON/OFF
Indicator light Program
Button PROGRAM: Preprogramming
of CD titles
Button Skip/Fast Search backwards
ꢂ/ Minute
Button PLAY/PAUSE: Start of the CD
playback or brief interruption in the
CD playback
ꢀ The use of an alkaline battery is
recommended. In order to ensure
optimum functioning, the battery
should be changed every 6 months.
Batteries are not charged in the
battery compartment!
1&
l
Battery Back-up System in Case of
Power Failures
Volume controller
Tuning knob: for selecting the radio
station
1(
2)
The batteries ensure that the clock conti-
nues to function even in the event of a
power failure. In order to prolong the
battery life, however, the time is not
shown on the display. If no battery has
been inserted, 12:00 appears on the dis-
play. This means that you have to carry
out the time and alarm settings again.
2! Band selector switch: AM (MW) - FM
Function selector switch:
CD - TUNER - BUZZER
2@
2# FM antenna
- 6 -
ꢀ
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 7
Setting the Time
Set the desired volume with the
5.
6.
7.
volume controller
.
1(
Setting the time when switching on the
first time:
➩Hold the button TIME
Select the desired radio station
using the TUNING knob
.
2)
depressed
To switch off the radio, press the
q
to switch between the 12 hour and
button ON/OFF . The indicator
1#
24 hour modes.
light ON/OFF
goes out.
g
➩The time flashes. Set the desired time
using the buttons MINUTE
and
1&
HOUR
.
e
Use of the CD Player
➩As soon as you press the button TIME
, the setting is saved. The displayed
q
Open the CD compartment
by
1.
w
time no longer flashes.
hand and insert the CD (with the
label facing to the rear) into the
CD compartment and close the
CD compartment.
Setting the time at some later point:
➩Hold the button TIME
depressed
q
to switch between the 12 hour and
24 hour modes.
➩Press the button TIME
Push the function selector switch
to position CD.
2.
3.
2@
The time
q.
flashes. Set the desired time using
When the ON/OFF button
is pres-
1#
the buttons MINUTE and HOUR
➩As soon as you press the button
.
e
sed, the total number of CD tracks
appears on the display. After a few
seconds, the time is displayed again.
1&
TIME again, the setting is saved.
q
The displayed time no longer flashes.
Press the button PLAY/PAUSE
to
4.
l
start the playback of the first track.
01
Radio operation
appears first on the display,
followed shortly thereafter by the
time again.
Push the function selector switch
to position TUNER.
1.
2.
3.
2@
Push the band selector switch
to
ꢀ Use the button PLAY/PAUSE
also
2!
l
position FM (UKW) or AM (MW).
to briefly interrupt the playing of a
track. The playback can be resumed
In order to achieve optimum recep-
tion, extend the FM antenna to
by pressing button PLAY/PAUSE
again.
2#
l
its full length. For the AM waveband,
the appliance needs to be turned to
achieve optimum reception.
Set the desired volume with the
5.
6.
volume controller
.
1(
Switch on the appliance with the
The playback can be stopped by
pressing button STOP
4.
ON/OFF button . The indicator
.
q
1#
light
comes on when the appliance
g
is switched on. The volume display
d
and frequency display
light up.
1!
- 7 -
ꢀ
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 8
Further Functions of the CD Player
Select your track with the buttons
4.
Skip/Fast Search
/
. Then press
ek
ꢂ SKIP/FAST SEARCH ꢁ
the button PROGRAM
to save the
j
track. Proceed as described above to
program further tracks. A total of
20 tracks can be programmed.
➩Press ꢁ , to skip to the next track,
e
or press button ꢁ
several times to
e
skip several tracks. Press
to jump
Press the button PLAY/PAUSE
to start the playback.
5.
6.
1&
1*
to the start of a track, or press button
several times to go back several
ꢂ
Press the button STOP
the playback.
to stop
1&
q
tracks. If ꢂ
or ꢁ
are held de-
1&
e
pressed, certain points of a track can
be found quickly.
If you wish to repeat the programming
later:
1. Press the button PROGRAM
again
1^
REPEAT
RANDOM
– Repeat playback /
– Random playback
to activate the programming. The in-
t
o
dicator light PROGRAM
lights up.
h
2. Press the button PLAY/PAUSE
1*
➩Press the button Play Mode
once
to play the programmed tracks.
➩To cancel the programming, open
the CD compartment.
r
to repeat the playback of a particular
track. The REPEAT display flashes.
t
➩Press the button Play Mode
once
r
again to repeat the playback of the
Setting the Alarm Time and
Alarm Type
whole CD. The REPEAT display
lights up.
t
➩Pressing button Play Mode
again
With this appliance you can set two
different wake-up times that can be
used individually or simultaneously:
r
cancels this function. The REPEAT
display goes out.
t
➩The indicator light RANDOM
o
lights up. The CD tracks are played
• AL 1 or AL 2
in random order.
• or AL 1 and AL 2
➩Pressing button Play Mode
again
r
cancels this function. The indicator
Setting the alarm time
• Alarm (AL 1):
light RANDOM goes out.
o
PROGRAM : For preprogramming
Press the button ALARM I . Press
1^
y
tracks in any order
the buttons Minute
and Hour
to
1&
e
set the desired alarm time. The wake-
1. Insert the CD.
up time is stored as soon as you press
2. Press button ON/OFF . The total
the button ALARM I . The indicator
1#
y
number of tracks appears briefly
for Alarm I appears on the display.
on the display.
If you wish to switch off the alarm,
Pressing the button PROGRAM
press the button ALARM I
.
y
3.
j
p01
again displays
. The indicator
light PROGRAM
flashes.
h
- 8 -
ꢀ
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 9
• Alarm (AL 2):
Switching OFF the alarm
Press the button ALARM II
and
y
carry out the same steps as described
above. The indicator for Alarm II
appears on the display.
The alarm time is programmed for
60 minutes.
➩SNOOZE: Press the button SNOOZE
a
to switch off the alarm temporarily.
The alarm will then sound again after
roughly 6 minutes.
➩Now select the wake-up mode using
the function selector switch
(CD,
2@
TUNER or BUZZER).
➩ON/OFF: Press button ON/OFF
.
1#
The alarm is switched off, but will
• Alarm mode BUZZER. Move the func-
sound again after 24 hours.
tion selector switch
position.
to the BUZZER
➩ALARM I/ALARM II: Press the
ALARM I / ALARM II ybutton to
switch off the alarm permanently.
2@
• Alarm mode Radio
➩ Carry out the steps 1 to 7 described
under "Radio operation" to tune
the radio to your desired station
for the radio alarm.
Sleep timer
➩Move the function selector switch
to position CD or TUNER.
2@
• Alarm mode CD player
➩When you press the button SLEEP
,
i
1. Open the CD compartment
"90" appears on the display.
w
and insert the CD (with the label
facing to the rear) into the CD
compartment and close the CD
compartment.
➩Press the button SLEEP
again to
i
set the desired sleep time (90, 60,
30 or 15 minutes). This starts after
a few seconds.
2. Push the function selector switch
to position CD.
➩To stop the playback earlier, press
2@
the button ON/OFF
.
1#
ꢀ The total playing time of the CD
ꢀ If the playing time of the CD is shor-
ter than the sleep time set by you,
the music ends as soon as all the
tracks on the CD have been played.
player in Alarm mode is 60 minutes.
ꢀ If no CD is inserted and alarm mode
CD player is set, the alarm signal of
the setting BUZZER sounds automa-
tically.
- 9 -
ꢀ
KH2255_IB_UK 13.02.2007 14:57 Uhr Seite 10
Cleaning
Wipe the appliance with a damp cloth.
Do not use aggressive or chemical clea-
ning agents. These would result in
damage to the appliance.
Disposal
Do not dispose of the device in
normal domestic waste.
Dispose of the device over a registered
waste disposal firm or through your com-
munal waste disposal facility. Observe
the currently valid regulations. In case
of doubt, consult your waste disposal
facility.
Battery disposal!
Batteries may not be disposed of with
normal domestic waste. All consumers
are statutorily obliged to dispose of
batteries at the collection point in their
community/district or with the original
supplier. The purpose of this obligation
is to ensure that batteries can be dispo-
sed of in an environmentally-friendly
manner. Only dispose of batteries when
they are fully discharged.
Warranty & customer service
The warranty conditions and the service
address can be found on the warranty
card.
Kompernaß GmbH
Burgstrasse 21
D-44867 Bochum
- 10 -
ꢀ
|