Kodak DVD Player MDV434K User Manual

User guide  
S M A R T . V E R Y S M A R T .  
MDV434K  
DIGITAL VIDEO DISC PLAYER  
01-37 MDV434K_Eng_552  
1
04/02/05, 4:13 PM  
 
Index  
English --------------------------------------- 6  
Español ------------------------------------ 38  
Português --------------------------------- 72  
‘CONSUMERS SHOULD NOTETHAT NOT  
ALL HIGH DEFINITIONTELEVISION SETS  
ARE FULLY COMPATIBLEWITHTHIS  
PRODUCT AND MAY CAUSE ARTIFACTS  
TO BE DISPLAYED INTHE PICTURE. IN  
CASE OF 525 OR 625 PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED  
THATTHE USER SWITCHTHE  
CONNECTIONTOTHE ‘STANDARD  
DEFINITION’ OUTPUT. IFTHERE ARE  
QUESTIONS REGARDING OURTV SET  
COMPATIBILITYWITHTHIS MODEL 525p  
AND 625p DVD PLAYER, PLEASE CONTACT  
OUR CUSTOMER SERVICE CENTER.’  
The apparatus shall not be exposed to dripping  
or splashing and that no objects filled with  
liquids, such as vases, shall be placed on  
apparatus.  
Due to the inconsistency of disc formats  
provided by various disc manufacturers, your  
DVD system may require a playability  
enhancement or upgrade. As DVD technology  
advances, these enhancements will become  
common and will be easy to complete.  
3
01-37 MDV434K_Eng_552  
3
04/02/05, 4:13 PM  
 
Contents  
Introduction  
Disc Operations  
Supplied accessories ....................................... 6  
Care and safety information.......................... 6  
Playable Discs ................................................. 16  
Region Codes ................................................. 16  
Playing discs..................................................... 16  
Basic playback controls................................. 17  
Selecting various repeat/shuffle functions 17  
Repeat play mode ......................................... 17  
Repeating a section within a chapter/track .  
......................................................................... 17  
Operations for video playback ................... 18  
Using the Disc Menu.................................... 18  
Zooming in ..................................................... 18  
Resuming playback from the last stopped  
point ................................................................ 18  
Slow motion................................................... 18  
Using the OSD menu .................................. 18  
Special DVD features .................................... 19  
Playing aTitle ................................................. 19  
Camera Angle ................................................ 19  
Changing the Audio Language .................... 19  
Subtitles .......................................................... 19  
SpecialVCD & SVCD Features ............. 19-20  
Playback Control (PBC) .............................. 19  
Preview ........................................................... 20  
Playing MP3/JPEG/Kodak Picture CD........ 21  
General Operation....................................... 21  
Selecting a folder and track/file ................. 21  
Special picture disc features ........................ 22  
Preview Function .......................................... 22  
Zoom picture ................................................ 22  
Playback with multi-angles .......................... 22  
Scan Effect ...................................................... 22  
Connections  
ConnectingTV.............................................. 7-8  
Using CompositeVideo jacks (CVBS)........ 7  
Using ComponentVideo jacks (Pr PbY) ... 7  
Using an accessory RF modulator .............. 8  
Connecting the power cord.......................... 8  
Optional : Connecting to an Audio System .  
............................................................................. 9  
Stereo system has Dolby Pro Logic or Right  
/ Left Audio In jack ......................................... 9  
Optional: Connecting Digital AV Receiver ...  
............................................................................. 9  
Receiver has a PCM, Dolby Digital, or  
MPEG2 decoder.............................................. 9  
Functional Overview  
Front and Rear Panels .................................. 10  
Remote Control ............................................ 11  
Getting Started  
Step 1: Inserting batteries into the  
Remote Control ............................................ 12  
Using the Remote Control to operate the  
Player ............................................................... 12  
Step 2: Setting up theTV ........................12-14  
Setting up Progressive Scan feature (for  
Progressive ScanTV only)........................... 13  
To deactivate Progressive manually .......... 14  
Selecting the colour system that  
corresponds to yourTV.............................. 14  
Step 3: Setting language preference ........... 15  
Setting the OSD Language.......................... 15  
Setting the Audio, Subtitle and Disc menu  
language .......................................................... 15  
Karaoke Operations  
Playing Karaoke discs .................................... 23  
General Operation....................................... 23  
Key setting...................................................... 23  
Vocal ................................................................ 23  
Mode ............................................................... 23  
4
01-37 MDV434K_Eng_552  
4
04/02/05, 4:13 PM  
 
Contents  
DVD Menu Options  
General Setup menu ...............................24-25  
Locking/Unlocking the disc for viewing ... 24  
Dimming system’s display screen .............. 24  
Programming disc tracks.......................24-25  
OSD Language............................................... 25  
Screen Saver - turning on/off ..................... 25  
Sleep ................................................................ 25  
Audio Setup Menu ...................................26-28  
Analogue output ........................................... 26  
Digital Audio Setup................................ 26-27  
Sound Mode................................................... 27  
Night Mode - turning on/off....................... 28  
Video Setup Menu ...................................28-30  
TVType ........................................................... 28  
Setting theTV Display ................................. 29  
Progressive - turning on/off ........................ 29  
Picture Setting ............................................... 30  
Preference Page........................................ 31-33  
Audio, Subtitle, Disc Menu.......................... 31  
Restricting playback by Parental Control.....  
.................................................................. 31-32  
PBC .................................................................. 32  
Changing the Password ............................... 33  
Restoring to original settings ..................... 33  
Troubleshooting ......................... 34–35  
Specifications ...................................... 36  
Glossary ......................................................................37  
Language Code............................................ 106  
5
01-37 MDV434K_Eng_552  
5
04/02/05, 4:14 PM  
 
Introduction  
G Do not block the vents  
Supplied accessories  
– Do not operate the DVD Player in an  
enclosed cabinet, allow about 10 cm (4  
inch) of free space all around the player  
for adequate ventilation.  
Composite video  
cable (yellow)  
10 cm  
(4 inches)  
10 cm  
(4 inches)  
PHILIPS  
10 cm  
(4 inches)  
Audio cable  
(white, red)  
G Care of the cabinet  
– Use a soft cloth slightly moistened with  
a mild detergent solution. Do not use a  
solution containing alcohol, spirits,  
ammonia or abrasives.  
G Finding a suitable location  
– Place the player on a flat, hard, and  
stable surface.  
Remote Control  
and  
two AA batteries  
G Disc handling  
To clean a CD, wipe it in a  
straight line from the center  
towards the edge using a soft,  
lint-free cloth. A cleaning  
agent may damage the disc!  
– Write only on the printed  
side of a CDR(W) and only with a soft  
felt-tipped pen.  
Care and safety information  
G Power consumption  
– Handle the disc by its edge, do not  
touch the surface.  
– When the system is switched to  
Standby mode, it is still consuming power.  
To disconnect the system from the power  
supply completely, remove the AC power  
plug from the wall jack.  
G Avoid high temperatures, moisture,  
water and dust  
– Do not expose the player, batteries or  
discs to humidity, rain, sand or excessive  
heat (caused by heating equipment or  
direct sunlight.)  
G Avoid condensation problem  
– The lens may cloud over when the  
player is suddenly moved from cold to  
warm surroundings, making it impossible  
to play a disc. Leave the player in the  
warm environment until the moisture  
evaporates.  
6
01-37 MDV434K_Eng_552  
6
04/02/05, 4:14 PM  
 
Connections  
ConnectingTV  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
COMPONENT  
V
U
(Pr/Cr)  
VIDEO IN  
AUDIO  
IN  
S-VIDEO  
V
U
Y
(Pr/Cr)  
AUDIO  
IN  
(Pb/Cb)  
VIDEO IN  
(Pb/Cb)  
COMPONENT  
VIDEO IN  
VIDEO IN  
Y
S-VIDEO  
IN  
V
U
(Pr/Cr)  
AUDIO  
OUT  
(Pb/Cb)  
V
I
D
E
O
I
N
COMPONENT  
VIDEO IN  
Y
S-VIDEO  
IN  
V
U
(Pr/Cr)  
AUDIO  
OUT  
(Pb/Cb)  
V
I
D
E
O
I
N
Y
1
2
1
2
IMPORTANT!  
IMPORTANT!  
– The progressive scan video  
quality is only possible when usingY  
Pb Pr and a progressive scanTV is  
required.  
You only need to make one video  
connection from the following  
options, depending on the  
capabilities of yourTV system.  
– Connect the DVD system directly  
to theTV.  
Using ComponentVideo jacks  
(Y Pb Pr)  
Using CompositeVideo jacks  
(CVBS)  
1 Use the component video cables (red/  
blue/green) to connect the DVD system’s  
Y Pb Pr jacks to the corresponding  
1 Use the composite video cable (yellow) to  
connect the DVD Player’s CVBS (VIDEO)  
jack to the video input jack (or labeled as  
A/V In,Video In, Composite or Baseband)  
on theTV (cable supplied).  
Component video input jacks (or labeled  
asY Pb Pr) on theTV (cable not supplied).  
2 To hear the sound of this DVD Player  
through yourTV, use the audio cables  
(white/red) to connect AUDIO OUT (L/  
R) jacks of the DVD Player to the  
corresponding AUDIO IN jacks on theTV  
(cable supplied).  
2 To hear the sound of this DVD Player  
through yourTV, use the audio cables  
(white/red) to connect AUDIO OUT (L/  
R) jacks of the DVD Player to the  
corresponding AUDIO IN jacks on theTV 3 Proceed to page 13 for detailed  
(cable supplied).  
Progressive Scan set up.  
7
01-37 MDV434K_Eng_552  
7
04/02/05, 4:14 PM  
 
Connections  
Connecting the power cord  
RF coaxial cable toTV  
2
Back of RF Modulator  
(example only)  
INT IN  
TO TV  
AUDIO IN  
VIDEO  
IN  
R
L
CH3 CH4  
COMPONENT  
VIDEO IN  
S-VIDEO  
IN  
V
U
Y
(Pr/Cr)  
AUDIO  
OUT  
~
AC MAINS  
(Pb/Cb)  
VIDEO IN  
Antenna or  
CableTV signal  
1
IMPORTANT!  
After everything is connected  
properly, plug in the AC power cord  
to the power outlet.  
Never make or change any connections  
with the power switched on.  
– If yourTV only has a single  
Antenna In jack (or labeled as 75  
ohm or RF In,) you will need an RF  
modulator in order to view the DVD  
playback on theTV. See your  
electronics retailer for details on RF  
modulator availability and  
When no disc is loaded, press  
STANDBY ON on the DVD Player  
front panel,  
operations.  
NO DISC” may appear on the  
display panel.  
Using an accessory RF modulator  
1 Use the composite video cable (yellow) to  
connect the DVD Player’s CVBS jack to  
the video input jack on the RF modulator.  
STOP  
PLAY/PAUSE  
OPEN/CLOSE  
NO DISC  
2 Use the RF coaxial cable (not supplied) to  
connect the RF modulator to yourTV’s  
RF jack.  
8
01-37 MDV434K_Eng_552  
8
04/02/05, 4:14 PM  
 
Connections  
Optional: Connecting to an  
Audio System  
Optional: Connecting Digital AV  
Receiver  
STEREO  
AV Receiver  
AUDIO  
IN  
AUDIO  
IN  
DIGITAL  
DIGITAL  
Stereo system has Dolby Pro Logic  
or Right / Left Audio In jack  
Receiver has a PCM, Dolby Digital,  
or MPEG2 decoder  
1 Select one of the video connections  
(CVBSVIDEO IN, SCART or  
1 Select one of the video connections  
(CVBSVIDEO IN, SCART or  
COMPONENTVIDEO IN) depending on  
the options available on yourTV.  
COMPONENTVIDEO IN) depending on  
the options available on yourTV.  
2 Connect the COAXIAL jack of the DVD  
Player to the corresponding Digital Audio  
In jack on your Receiver (cable not  
supplied).  
2 Use the audio cables (white/red) to  
connect AUDIO OUT (L/R) jacks of  
the DVD Player to the corresponding  
AUDIO IN jacks on the stereo system  
(cable supplied).  
3 Set the DVD Player’s Digital Output to  
PCM-ONLY or ALL depending on the  
capabilities of your Receiver (see page 26  
“Digital Output”).  
Helpful Hint:  
If the audio format of the Digital Output  
does not match the capabilities of your  
receiver, the receiver will produce a strong,  
distorted sound or no sound at all.  
9
01-37 MDV434K_Eng_552  
9
04/02/05, 4:14 PM  
 
Functional Overview  
Front and Rear Panels  
STANDBY-ON B  
To switch the DVD Player to Standby  
mode or ON  
IR Sensor  
– Point the remote control towards this  
sensor  
Disc tray  
OPEN/CLOSE /  
2;PLAY/PAUSE  
To start or interrupt playback  
Open/Close the disc tray  
Display  
9 STOP  
To stop playback  
Shows the current status of the DVD  
Player  
STOP  
PLAY/PAUSE  
OPEN/CCLOSE  
STANDBY-ON  
LEVEL  
– Microphone volume control  
MIC LEVEL  
MIC  
– For connecting microphone  
Mains (AC Power Cord)  
Audio Out (Left/Right)  
– Connect toAUDIO inputs of an amplifier,  
receiver or stereo system  
Connect to a standard AC outlet  
CVBS (VIDEO Out)  
Connect to CVBSVideo input of aTV  
COAXIAL (Digital audio out)  
– Connect to coaxialAUDIO input of a  
digital audio equipment  
YPbPr (Component Video Out)  
Connect toYPbPr input of aTV  
Caution: Do not touch the inner pins of the jacks on the rear panel.  
Electrostatic discharge may cause permanent damage to the unit.  
10  
01-37 MDV434K_Eng_552  
10  
04/02/05, 4:14 PM  
 
Functional Overview  
Remote Control  
POWER B  
To switch the DVD player to  
standby mode or ON  
PREVIEW  
To search chapter/track during  
playback  
0-9 numerical key pad  
– Selects numbered items in a menu  
OPEN  
Open the disc tray  
RETURN/TITLE  
To go back to previous menu/show  
title menu  
DISPLAY  
Displays information onTV  
screen during playback  
T
S
To search or select previous  
chapter or track  
To search or select next chapter  
or track  
PAUSE ( ; )  
PLAY ( B )  
To start playback  
To pause playback temporarily /  
frame-by-frame playback  
MUTE  
STOP ( 9 )  
To stop playback  
Disables or enables sound output  
SEARCH  
– Not available for this model  
1 2 3 4  
Selects an item in the menu/ fast  
forward/backward, slow forward/  
backward  
OK  
Acknowledge menu selection  
SYSTEM MENU  
DISC MENU  
– Enters or exits the disc contents  
menu  
Access or exit DVD Player’s  
system menu  
– Switches on or off the playback  
control mode (forVCD version  
2.0 only)  
SUBTITLE  
To access subtitle language  
system menu  
REPEAT  
– Selects various repeat modes  
ANGLE  
Selects a DVD camera angle  
REPEAT (A-B)  
– Repeats playback a specific section  
on a disc  
ZOOM  
Enlarge a picture on theTV  
screen  
AUDIO  
To access audio language system  
menu  
MIC ON/OFF  
Display karaoke menu to set MIC  
on or off  
VOCAL  
Choose audio channels or  
karaoke methods  
MODE  
Display karaoke menu  
Helpful Hint:  
Press “STOP” for about 2 seconds to  
OPEN or CLOSE disc tray.  
11  
01-37 MDV434K_Eng_552  
11  
04/02/05, 4:14 PM  
 
Getting Started  
Step 2: Setting up theTV  
Step 1: Inserting batteries into  
the Remote Control  
IMPORTANT!  
Make sure you have completed all  
the necessary connections. (See  
pages 7-8 ConnectingTV).  
3
1
2
1 Turn on theTV and set to the correct  
video-in channel. You should see the DVD  
background screen on theTV.  
1 Open the battery compartment.  
2 Usually these channels are between the  
lowest and highest channels and may be  
called FRONT,A/V IN, orVIDEO. See your  
TV manual for more details.  
2 Insert two batteries type R06 or AA,  
following the indications (+-) inside  
the compartment.  
Or, you may go to channel 1 on your  
TV, then press the Channel down button  
repeatedly until you see theVideo In  
channel.  
Or, theTV Remote Control may have a  
button or switch that chooses different  
video modes.  
3 Close the cover.  
Using the Remote Control to  
operate the Player  
1 Aim the Remote Control  
TOP  
PLAY/PAUSE  
Or, set theTV to channel 3 or 4 if you  
are using an RF modulator.  
directly at the remote  
sensor (IR) on the front  
panel.  
3 If you are using external equipment, (eg.  
audio system or receiver), turn it on and  
select the appropriate input source for  
the DVD Player output. Refer to the  
equipment owner’s manual for detail.  
2 Do not put any objects  
between the Remote  
Control and the DVD  
Player while operating the  
DVD Player.  
CAUTION!  
Remove batteries if they are  
exhausted or if the Remote Control  
is not being used for a long time.  
Do not use old and new or  
different types of batteries in  
combination.  
Batteries contain chemical  
substances, so they should be  
disposed properly.  
12  
01-37 MDV434K_Eng_552  
12  
04/02/05, 4:14 PM  
 
Getting Started  
7 Select {PROGRESSIVE} to {ON}, then OK  
Setting up Progressive Scan feature  
(for Progressive ScanTV only)  
to confirm.  
The instruction menu appears on the  
The progressive scan display twice the  
number of frames per seconds than  
interlaced scanning (ordinary normalTV  
system).With nearly double the number  
of lines, progressive scan offers higher  
picture resolution and quality.  
TV.  
ACTIVATING PROGRESSIVE:  
1) ENSURE YOUR TV HAS PROGRESSIVE SCAN.  
2) CONNECT WITH YPBPR (GBR) VIDEO CABLE.  
3) IF THERE IS A DISTORTED PICTURE, WAIT  
15 SECONDS FOR AUTO RECOVERY.  
IMPORTANT!  
Before enabling the progressive scan  
feature, you must ensure:  
1)YourTV can accept progressive signals,  
a progressive scanTV is required.  
2)You have connected the DVD player to  
yourTV usingY Pb Pr (see page 7.)  
Cancel  
OK  
OK  
8 Press 1 to highlight  
in the menu  
and press OK to confirm.  
There will be a distorted picture on  
yourTV at this state until you turn  
on the progressive scan mode on  
yourTV.  
1 Turn on yourTV.  
2 Turn off yourTV progressive scan mode  
or turn on interlaced mode (refer to your  
TV user manual.)  
9 Turn on yourTV progressive scan mode  
(refer to yourTV user manual.)  
The below menu appears on theTV.  
3 Press POWER on the remote control to  
turn on the DVD player.  
CONFIRM AGAIN TO USE PROGRESSIVE  
SCAN. IF THE PICTURE IS GOOD,  
PRESS OK BUTTON ON REMOTE  
4 Select the correctVideo Input channel.  
(See page 12).  
The DVD background screen appears  
on theTV.  
Cancel  
OK  
5 Press SYSTEM MENU.  
OK  
0 Press 1 to highlight  
in the menu  
6 Press 2repeatedly to select {VIDEO  
and press OK to confirm.  
The set up is complete now and you  
SETUP PAGE}.  
can start enjoy the high quality picture.  
- - Video Setup Page - -  
TV Type  
TV Display  
Progressive  
On  
Off  
Picture Setting  
Set Interlace TV Mode  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
13  
01-37 MDV434K_Eng_552  
13  
04/02/05, 4:14 PM  
 
Getting Started  
4 Press 3 4 to highlight one of the options  
To deactivate Progressive manually  
below:  
G When the distorted picture still  
appears on theTV, it may be due to  
the connectedTV does not accept  
progressive signals, and progressive is set  
by mistake. You must reset the unit to  
interlace format.  
PAL – Select this if the connectedTV is  
PAL system. It will change the video signal  
of a NTSC disc and output in PAL format.  
NTSC – Select this if the connectedTV  
is NTSC system. It will change the video  
signal of a PAL disc (VCD only) and  
output in NTSC format.  
1 Turn off yourTV progressive scan mode  
or turn on to interlaced mode (refer to  
yourTV user manual.)  
Multi – Select this if the connectedTV is  
compatible with both NTSC and PAL  
(multi-system). The output format will be  
in accordance with the video signal of the  
disc.  
2 Press OPEN/CLOSE on the DVD player  
to open the disc tray.  
3 Press numeric keypad 1on the  
remote control for few seconds.  
The DVD blue background screen  
will appear on theTV.  
5 Select an item and press OK.  
Helpful Hints:  
Before changing the currentTV  
Standard setting, ensure that yourTV  
supports the ‘selectedTVType’ system.  
Selecting the colour system that  
corresponds to yourTV  
If there is no proper picture on  
This DVD Player is compatible with both  
NTSC and PAL. In order for a DVD disc  
to play on this Player, the colour system of  
the Disc, theTV and the DVD Player  
should match.  
yourTV, wait for 15 seconds for auto  
recovery.  
CHANGING PAL TO NTSC:  
1. ENSURE THAT YOUR TV SUPPORTS  
NTSC STANDARD.  
2. IF THERE IS A DISTORTED PICTURE  
DISPLAYED ON THE TV, WAIT 15  
SECONDS FOR AUTO RECOVER.  
- - Video Setup Page - -  
OK  
CANCEL  
CANCEL  
TV Type  
PAL  
TV Display  
Progressive  
Picture Setting  
Multi  
NTSC  
CONFIRM AGAIN TO USE NEW TV  
TYPE SETTING.  
OK  
NTSC TV  
1 Press SYSTEM MENU.  
2 Press 2repeatedly to select {VIDEO  
SETUP PAGE}.  
3 Press 3 4 to highlight {TVTYPE}, then  
press 2.  
To return to the previous menu, press 1.  
To remove the menu, press SYSTEM MENU.  
TIPS:  
14  
01-37 MDV434K_Eng_552  
14  
04/02/05, 4:14 PM  
 
Getting Started  
Step 3: Setting language  
preference  
Setting the Audio, Subtitle and Disc  
menu language  
You can choose your own preferred  
language or soundtrack from audio,  
subtitles and disc menu languages. If the  
language selected is not available on the  
disc, the disc’s default language will be  
used instead.  
You can select your preferred language  
settings.This DVD Player will  
automatically switch to the language for  
you whenever you load a disc.  
Setting the OSD Language  
The On-screen language for the system  
menu will remain as you set it, regardless  
of various disc languages.  
- - Preference Page - -  
Audio  
English  
French  
Spanish  
Chinese  
Japanese  
Korean  
Subtitle  
Disc Menu  
Parental  
PBC  
Password  
Default  
- - General Setup Page - -  
Disc Lock  
Display Dim  
Program  
Russian  
OSD Language  
Screen Saver  
Sleep  
ENGLISH(UK)  
ESPAÑOL  
Set Preference To English  
PORTUGUÊS  
1 Press STOP twice then, press SYSTEM  
MENU.  
Set OSD Language English(UK)  
2 Press 2repeatedly to select  
{PREFERENCE PAGE}.  
1 Press SYSTEM MENU.  
3 Press 34 to highlight one of the options  
below at a time, then press 2.  
– ‘Audio’ (disc’s soundtrack)  
– ‘Subtitle’ (disc’s subtitles)  
2 Press 2to select {GENERAL SETUP  
PAGE}.  
3 Press 3 4 to highlight {OSD  
LANGUAGE}, then press 2.  
– ‘Disc Menu’ (disc’s menu)  
4 Press 34 to select a language and press  
4 Press 34 to select a language and press  
OK.  
OK.  
If the language you want is not in the  
list, then select {OTHERS},  
then use the numeric keypad (0-9) on  
the remote to enter the 4-digit language  
code ‘XXXX’ (see page 106 “Language  
Code”) and press OK.  
5 Repeat steps 3~4 for other language  
settings.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
15  
01-37 MDV434K_Eng_552  
15  
04/02/05, 4:14 PM  
 
Disc Operations  
IMPORTANT!  
Region Codes  
If the inhibit icon (ø) appears on  
theTV screen when a button is  
pressed, it means the function is not  
available on the current disc or at  
the current time.  
Depending on the DVD orVIDEO  
CD, some operations may be  
different or restricted.  
DVD discs must be labeled for ALL  
regions or Region 4 in order to  
play on this Player.You cannot play  
Discs that are labeled for other  
regions.  
ALL  
4
Helpful Hints:  
It may not be possible to play CD-R/RW  
Do not push on the disc tray or  
put any objects other than disc on  
the disc tray. Doing so may cause  
the disc player malfunction.  
or DVD-R/RW in all cases due to the type of  
disc or condition of the recording.  
If you are having trouble playing a  
certain disc, remove the disc and try a  
different one. Improper formatted disc will  
not play on this DVD Player.  
Playable Discs  
Your DVD Player will play:  
– DigitalVideo Discs (DVDs)  
– Video CDs (VCDs)  
– SuperVideo CDs (SVCDs)  
– DigitalVideo Discs +  
Recordable[Rewritable] (DVD+R[W])  
– Compact Discs (CDs)  
Playing discs  
1 Connect the power cords of the DVD  
Player andTV (and any optional stereo or  
AV receiver) to a power outlet.  
2 Turn on theTV power and set to the  
correctVideo In channel. (See page 12  
“Setting up theTV”).  
– MP3 discs, picture (Kodak, JPEG) files  
on CD-R(W).  
– JPEG/ISO 9660 format  
3 Press STANDBY-ON on the DVD Player  
front panel.  
– Maximum 30 characters display.  
– Supported sampling frequencies :  
32 kHz, 44.1 kHz, 48 kHz (MPEG-1)  
16 kHz, 22.05 kHz, 24 kHz (MPEG-2)  
– Supported Bit-rates : 32~256 kbps  
(MPEG-1), 8~160 kbps (MPEG-2)  
variable bitrates  
You should see the DVD background  
screen on theTV.  
4 Press OPEN/CLOSE 0 button to open  
the disc tray and load in a disc, then press  
the same button again to close the disc  
tray.  
Make sure the label side is facing up.  
For double-sided discs, load the side you  
want to play facing up.  
5 Playback will start automatically. If not  
press PLAY B.  
If a disc menu appears on theTV, see  
page 18 “Using the Disc Menu”.  
If the disc is locked by parental control,  
you must enter your six-digit password.  
(See page 33).  
TIPS:  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
16  
01-37 MDV434K_Eng_552  
16  
04/02/05, 4:14 PM  
 
Disc Operations  
Selecting various repeat/shuffle  
functions  
Basic playback controls  
Unless otherwise stated, all operations  
described are based on Remote Control  
use.  
Repeat play mode  
G While playing a disc, press REPEAT  
Pausing playback  
continuously to choose a ‘Play Mode’.  
1 During playback, press PAUSEÅ.  
Playback will pause and sound will be  
muted.  
CHAPTER (DVD)  
to repeat playback of the current  
chapter.  
2 To resume normal playback, press  
TRACK/TITLE (CD/SVCD/VCD/DVD)  
PLAY B.  
to repeat playback of the current  
track (CD/SVCD/VCD)/title (DVD).  
Selecting track/chapter  
ALL  
G Press S/ Tor use the numeric  
keypad (0-9) to key in a track/chapter  
number.  
to repeat playback of all the disc and  
all the programmed tracks.  
SHUFFLE  
If repeat mode is active, pressing S/  
T will replay the same track/chapter.  
to repeat playback at random order.  
to cancel the repeat mode.  
OFF  
Searching backward/forward  
G Press and hold 1/ 2, then press PLAY  
Bto resume normal playback.  
While searching, pressing 1/ 2  
repeatedly again will decrease/increase  
the search speed.  
Helpful Hint:  
ForVCD, repeat playback is not possible  
if the PBC mode is switched on.  
Repeating a section within a  
chapter/track  
Stopping playback  
G Press Ç.  
1 While playing a disc, press REPEAT A-B  
at your chosen starting point.  
2 Press REPEAT A-B again at your chosen  
end point.  
The section A and B can be set only  
within the same chapter/track.  
The section will now repeat  
continuously.  
3 To exit the sequence, press REPEAT  
A-B.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
17  
01-37 MDV434K_Eng_552  
17  
04/02/05, 4:14 PM  
 
Disc Operations  
Slow Motion  
Operations for video playback  
(DVD/VCD/SVCD)  
1 Press 34during playback to select the  
required speed: 1/2, 1/4, 1/8 or 1/16  
(backward or forward).  
Using the Disc Menu  
Depending on the disc, a menu may  
appear on theTV screen once you load in  
the disc.  
Sound will be muted.  
2 To return to normal speed, press PLAY B.  
Helpful Hint:  
To select a playback feature or item  
Slow backward is not possible onVCDs.  
G Use 1234keys or numeric keypad  
(0-9) on the remote, then press OK to  
start playback.  
Using the OSD menu  
OSD menu shows the disc playback  
information (for example, title or chapter  
number, elapsed playing time, audio/  
subtitle language), a number of operations  
can be done without interrupting disc  
playback.  
To access or remove the menu  
G Press DISC MENU on the remote.  
Zooming in  
This function allows you to enlarge the  
picture on theTV screen and to pan  
through the enlarged picture.  
1 During playback, press DISPLAY.  
A list of available disc information  
appears on theTV screen.  
1 During playback, press ZOOM  
repeatedly to display the picture with  
different scales.  
Menu  
Title  
01/01  
09/12  
2CH  
Off  
Chapter  
Audio  
Subtitle  
CHI  
Use 1234keys to pan through the  
enlarged picture.  
Bitrate 61  
Title Remain 0:48:59  
Playback will continue.  
Menu  
Track  
Disc Time 0:48:53  
Track Time 0:48:53  
Repeat  
2 Press ZOOM repeatedly to return to  
01/01  
the original size.  
Off  
Bitrate 71  
Total Elapsed 0:01:32  
Resuming playback from the last  
stopped point  
2 Press 34to view the information and  
Resume playback of the last 5 discs is  
possible, even if the disc was ejected or  
the power switched off.  
press OK to access.  
3 Press 2or OK to select an option.  
4 Use the numeric keypad (0-9) to input  
the number/time or press 34to make  
the selection, then press OK to confirm.  
Playback will change to the chosen  
time or to the selected title/chapter/  
track.  
G Load one of the last 5 discs.  
LOAD” appears.  
G Press PLAY Band the disc will be played  
back from the last point.  
To cancel resume mode  
G In stop mode, press STOP 9again.  
TIPS: The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
18  
01-37 MDV434K_Eng_552  
18  
04/02/05, 4:14 PM  
 
Disc Operations  
Special DVD Features  
Playing aTitle  
SpecialVCD & SVCD Features  
Playback Control (PBC)  
1 Press DISC MENU.  
The disc title menu appears on theTV  
screen.  
ForVCD with Playback Control (PBC)  
feature (version 2.0 only)  
G Press DISC MENU to toggle between  
‘PBC ON’ and ‘PBC OFF’.  
2 Use 3 4 1 2 keys or numeric keypad  
(0-9) to select a play option.  
If you select ‘PBC ON’, the disc menu  
(if available) will appear on theTV.  
Use the S/ T or the numeric  
keypad (0-9) to select a play option.  
3 Press OK key to confirm.  
Camera Angle  
G Press ANGLE repeatedly to select  
G During playback, pressing RETURN/  
TITLE will return to the menu screen (if  
PBC is on).  
different desired angle.  
Changing the Audio Language  
For DVD  
If you want to skip the index menu  
and playback directly from the  
beginning,  
G Press AUDIO repeatedly to select  
different audio languages.  
G Press DISC MENU key on the remote  
control to switch to PBC off.  
Changing the Audio Channel  
ForVCD  
G Press AUDIO to select the available  
audio channels provided by the disc (LEFT  
MONO, RIGHT MONO, MIX-MONO,  
STEREO).  
Subtitles  
G Press SUBTITLE repeatedly to select  
different subtitle languages.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
19  
01-37 MDV434K_Eng_552  
19  
04/02/05, 4:14 PM  
 
Disc Operations  
3 Press 3 4 1 2 to select a track and input  
your selected track number using the  
numeric keypad (0-9), then press OK.  
Playback will start automatically on the  
selected track.  
Preview Function (DVD/VCD)  
The preview function allows you to  
reduce the picture of 6 tracks enough to  
display in a full screen.  
1 Press PREVIEW.  
The preview menu appears on theTV  
screen.  
G For CDDA (Musical CD)  
Press PREVIEW to listen to the first  
10 seconds of each sound track in the  
disc.  
Select Digest Type:  
Title Digest  
Select Digest Type:  
Track Digest  
Chapter Digest  
Title Interval  
Disc Interval  
Track Interval  
Chapter Interval  
(Video CD example)  
(DVD example)  
2 Press 3 4 to select the PREVIEW type,  
then press OK.  
The picture of each segment will  
appear on the screen.  
A
D
B
E
C
F
(example for 6 thumbnail pictures display)  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
20  
01-37 MDV434K_Eng_552  
20  
04/02/05, 4:14 PM  
 
Disc Operations  
Playing MP3/JPEG/Kodak Picture  
CD  
Selecting a folder and track/file  
1 Press 34to select the folder and press  
OK to open the folder.  
IMPORTANT!  
2 Press 34to select a track/file.  
You have to turn on yourTV and set to  
the correctVideo In channel. (See page  
12 “Setting up theTV”).  
3 Press S / T to go to previous/next  
page.  
4 Press OK to confirm.  
General Operation  
Playback will start from the selected  
file to the end of the folder.  
1 Load a disc.  
The disc reading time may exceed 30  
seconds due to the complexity of the  
directory/file configuration.  
The data disc menu appears on theTV  
screen.  
G To select another folder from the current  
disc, press 1to return to the root menu,  
then press 34to make your selection  
and press OK to confirm.  
2 Playback will start automatically. If not  
During playback, you can;  
press PLAY B.  
G Press S / T to select another track/  
file in the current folder.  
01:42 04:40  
001/020  
G Press REPEAT continuously to access  
different ‘Play Mode’.  
Coco Lee  
FOLDER: files will be played back once.  
REPEAT ONE: one file being played  
repeatedly.  
REPEAT FOLDER: all files in one folder  
being played repeatedly.  
--  
Before  
MP3  
Coco  
Coco  
-
-
Before  
I love  
- - - - - -  
MP3  
ALBUM - - - - - -  
2002  
MP3 Coco  
-
Jazz  
SHUFFLE: all files in the current folder  
being played at random order.  
G Press Åto pause playback.  
Helpful Hints:  
It may not be possible to play certain  
MP3/JPEG disc due to the configuration and  
characteristics of the disc or condition of the  
recording.  
It is normal to experience an occasional  
“skip” while listening to your MP3 disc.  
For multi-session discs with different  
formats, only the first session will be available.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
21  
01-37 MDV434K_Eng_552  
21  
04/02/05, 4:14 PM  
 
Disc Operations  
Zoom picture  
Special picture disc features  
1 During playback, press ZOOM repeatedly  
IMPORTANT!  
to display the picture with different scales.  
You have to turn on yourTV and set to  
the correctVideo In channel. (See page  
12 “Setting theTV”).  
2 Use 1234keys to view the zoomed  
picture.  
Playback with multi-angles  
G Load a Picture disc (Kodak Picture CD,  
JPEG).  
G During playback, press 3412 to rotate  
the picture on theTV screen.  
For Kodak disc, the slide show will  
begin.  
3: flip the picture vertically  
For JPEG disc, the picture menu  
appears on theTV screen. Press PLAY B  
to start the slide-show playback.  
4: flip the picture horizontally  
1: rotate the picture anti-clockwise  
2: rotate the picture clockwise  
Scan Effect  
Preview Function (JPEG)  
G Press ANGLE repeatedly to choose  
different scan effect.  
This function shows the content of the  
current folder or the whole disc.  
Various scan effect appears on the top  
left hand corner on theTV screen.  
1 Press PREVIEW during playback.  
12 thumbnail pictures will appear on  
theTV screen.  
2 Press S / T to display the other  
pictures on the previous/next page.  
3 Use 1234 to highlight one of the  
picture and press OK to start playback.  
4 Press DISC MENU to return to Picture  
CD menu.  
The operating features described here might not be possible for certain discs. Always refer  
to the instructions supplied with the discs.  
TIPS:  
22  
01-37 MDV434K_Eng_552  
22  
04/02/05, 4:14 PM  
 
Karaoke Operations  
Playing Karaoke discs  
Vocal  
G You can fade out the original vocal from a  
IMPORTANT!  
karaoke disc.  
You have to turn on yourTV and set to  
the correctVideo In channel. (See page  
12 “Setting up theTV”).  
G Press VOCAL repeatedly to choose  
different audio modes.  
Helpful Hint:  
General Operation  
This function and on screen display  
depends on the availability of the disc.  
1 Connect a microphone (not supplied) to  
MIC on the side panel of the DVD player.  
Mode  
G Press MODE repeatedly to toggle  
between ‘Vol’,‘Echo’ or ‘Key’.  
1 When ‘Vol’ is selected, press 12to adjust  
the vocal value between 0 and 20.  
2 When ‘Echo’ is selected, press 12to  
adjust the echo value between 0 and 20.  
3 When ‘Key’ is selected, press 12to  
2 Press KARAOKE repeatedly.  
‘MIC ON/OFF’ appears on theTV  
screen.  
adjust the pitch value between -16 and 16.  
3 Load a karaoke disc and press PLAY B.  
4 Adjust the microphone volume using  
LEVEL button on the side panel of the  
DVD player.  
Helpful Hint:  
Before connecting the microphone, set  
the microphone volume to the minimum level  
to prevent howling.  
Key setting  
G This function allows you to adjust the key  
tone level to match with your vocal.  
G Press KEY and use 12 to adjust the  
pitch to adopt your voice.  
23  
01-37 MDV434K_Eng_552  
23  
04/02/05, 4:14 PM  
 
DVD Setup Menu Options  
This DVD Player setup is carried out via  
theTV, enabling you to customise the  
DVD Player to suit your particular  
requirements.  
Dimming players display panel  
You can select different levels of  
brightness for the display screen.  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
highlight {DISPLAY DIM}, then press 2.  
General Setup menu  
100% Select this for full brightness.  
70% – Select this for medium brightness.  
40% – Select this for dimming the display.  
1 In disc mode, press SYSTEM MENU.  
2 Press 1 2 to select ‘General Setup’ icon.  
3 Press OK to confirm.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
- - General Setup Page - -  
Programming disc tracks (not for  
Picture CD/MP3)  
Disc Lock  
Display Dim  
Program  
You can play the contents of the disc in  
the order you want by programming the  
tracks to be played. Up to 20 tracks can  
be stored.  
OSD Language  
Screen Saver  
Sleep  
Go to General Setup Page  
1 In ‘GENERAL SETUP PAGE’, press 3 4  
to highlight {PROGRAM}, then press 2  
to select {INPUT MENU}.  
Locking/Unlocking the disc for  
viewing  
2 Press OK to confirm.  
Not all discs are rated or coded by the  
disc maker. You can prevent a specific disc  
from playing by locking the disc. Up to 40  
discs can be locked.  
Programme : Track (01 - 17)  
1
2
3
4
5
04  
10  
11  
__  
__  
6
7
8
9
__  
__  
__  
__  
10 __  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
Exit  
START  
NEXT  
highlight {DISC LOCK}, then press 2.  
LOCK  
To input your favourite tracks/chapter  
Select this to block the playback of the  
current disc. Subsequent access to a  
locked disc requires six-digit password.  
The default password is ‘136 900’ (see  
page 33 “Changing the password”).  
3 Use the numeric keypad (0-9) to enter  
a valid track/chapter number.  
4 Use 1234keys to move the cursor to  
the next position.  
If the track number is more than ten,  
press T to open the next page and  
proceed with programming or,  
UNLOCK  
Select this to unlock the disc and allow  
future playback.  
Use 1234keys to highlight {NEXT}  
on the programme menu, then press OK.  
2 Press 3 4 to select a setting, then press  
5 Repeat steps 3~4 to input another  
OK to confirm your selection.  
track/chapter number.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
24  
01-37 MDV434K_Eng_552  
24  
04/02/05, 4:14 PM  
 
DVD Setup Menu Options  
If you want to remove a track  
6 Use 1234keys to move the cursor to  
Sleep  
Sleep function allows you to turn off the  
DVD Player automatically after a preset  
time.  
the track you want to remove.  
7 Press OK to remove this track from the  
programme menu.  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
highlight {SLEEP}, then press 2.  
To start programme playback  
8 Use 1234keys to highlight {START}  
on the programme menu, then press OK.  
Playback will start with the selected  
tracks under the programmed sequence.  
15 Mins  
Turn off the DVD Player after 15 minutes.  
30 Mins  
Turn off the DVD Player after 30 minutes.  
45 Mins  
To exit programme playback  
Turn off the DVD Player after 45 minutes.  
9 Use 1234keys to highlight {EXIT} on  
the programme menu, then press OK.  
60 Mins  
Turn off the DVD Player after 60 minutes.  
OSD Language  
OFF  
This menu contains various language  
options for display language on the screen.  
For details, see page 15.  
Turn off the sleep function.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
Screen Saver - turning on/off  
The screen saver will help to prevent your  
TV display device from becoming  
damaged.  
1 In ‘GENERAL SETUP PAGE’, press 3 4 to  
highlight {SCREEN SAVER}, then press 2.  
ON  
Select this if you wish to turn off theTV  
screen when disc playback is stopped or  
paused for more than 5 minutes.  
OFF  
Select this to disable the screen saver  
function.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
25  
01-37 MDV434K_Eng_552  
25  
04/02/05, 4:14 PM  
 
DVD Setup Menu Options  
Digital Audio Setup  
Audio Setup Menu  
The options included in Digital Audio  
Setup are:‘Digital Output’ and ‘LPCM  
Output’.  
1 In disc mode, press SYSTEM MENU.  
2 Press 1 2 to select ‘Audio Setup’ icon.  
3 Press OK to confirm.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
highlight {DIGITAL AUDIO SETUP}, then  
press 2.  
- - Audio Setup Page - -  
2 Press the 3 4 keys to highlight an option.  
Analog Output  
Digital Audio Setup  
Sound Mode  
3 Enter its submenu by pressing 2.  
4 Press 3 4 to select a setting, then press  
Night Mode  
OK to confirm your selection.  
Digital Output  
Set the Digital output according to your  
optional audio equipment connection.  
Off:Turn off the digital output.  
All: If you have connected your  
DIGITAL AUDIO OUT to a multi-channel  
decoder/receiver.  
PCM Only: Only if your receiver is  
not capable of decoding multi-channel  
audio.  
Go to Audio Setup Page  
Analog Output  
This options allows you to set the stereo  
analog output of your DVD Player.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
highlight {ANALOG OUTPUT}, then  
press 2.  
Helpful Hints:  
Stereo  
If DIGITAL OUTPUT is set to ‘All’, all  
Select this option when output delivers  
sound from only the two front speakers.  
audio settings except MUTE are invalid.  
LT/RT  
Select this option if your DVD Player is  
connected to a Dolby Pro Logic decoder.  
V SURR  
Allows the DVD player to use virtual  
surround sound effects.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
26  
01-37 MDV434K_Eng_552  
26  
04/02/05, 4:14 PM  
 
DVD Setup Menu Options  
LPCM Output  
Sound Mode  
If you connect the DVD Player to a PCM  
compatible receiver via the digital  
terminals, such as coaxial or optical etc,  
you may need to adjust ‘LPCM Output’.  
Discs are recorded at a certain sampling  
rate.The higher the sampling rate, the  
better the sound quality.  
The options included in Sound Mode  
Setup are: ‘3D’,‘Movie Mode’ and ‘Music  
Mode’.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
highlight {SOUND MODE}, then press 2.  
2 Press the 3 4 keys to highlight an option.  
48kHz: Playback a disc recorded at the  
sampling rate of 48kHz.  
96kHz: Playback a disc recorded at the  
sampling rate of 96kHz that can only be  
achieved in Stereo-Classic (Flat) mode.  
3 Enter its submenu by pressing 2.  
4 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
3D  
This function provides a virtual surround  
sound experience using just two speakers.  
Off, Living Room, Hall,Arena and  
Church  
Helpful Hint:  
LPCM Output can be selected only when  
PCM Only is activated.  
Movie Mode  
Select a Sound Mode that matches the  
type of music you are playing.These  
preset Sound Modes adjust the frequency  
bands of the video to enhance your  
favourite movie sound track.  
Off, Sci-Fic,Action, Drama and  
Concert  
Music Mode  
Select a Sound Mode that matches the  
type of music you are playing.These  
preset Sound Modes adjust the frequency  
bands of the audio to enhance your  
favourite music.  
Off, Digital, Rock, Classic and Jazz  
To return to the previous menu, press 1.  
To remove the menu, press SYSTEM MENU.  
TIPS:  
27  
01-37 MDV434K_Eng_552  
27  
04/02/05, 4:14 PM  
 
DVD Setup Menu Options  
Video Setup Menu  
Night Mode - turning on/off  
In this mode, the high volume outputs are  
softened and low volume outputs are  
brought upward to an audible level. It is  
useful for watching your favourite action  
movie without disturbing others at night.  
1 In disc mode, press SYSTEM MENU.  
2 Press 1 2 to select ‘Video Setup’ icon.  
3 Press OK to confirm.  
1 In ‘AUDIO SETUP PAGE’, press 3 4 to  
highlight {NIGHT MODE}, then press 2.  
- - Video Setup Page - -  
TV Type  
ON  
TV Display  
Progressive  
Picture Setting  
Select this to level out the volume. This  
feature is only available for movies with  
Dolby Digital mode.  
OFF  
Select this when you want to enjoy the  
surround sound with its full dynamic  
range.  
Go To Video Setup Page  
TVType  
2 Press 3 4 to select a setting, then press  
This menu contains the options for  
selecting the colour system that matches  
the connectedTV. For details, see page  
14.  
OK to confirm your selection.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
28  
01-37 MDV434K_Eng_552  
28  
04/02/05, 4:14 PM  
 
DVD Setup Menu Options  
Progressive - turning on/off  
Setting theTV Display  
Set the aspect ratio of the DVD Player  
according to theTV you have connected.  
The format you select must be available  
on the disc. If it is not, the setting forTV  
display will not affect the picture during  
playback.  
In the progressive scan mode, you can  
enjoy the high quality picture with less  
flickers. It only works when you have  
connected the DVD player’sY Pb Pr jacks  
to yourTV that supports the progressive  
video input. Otherwise, the a distorted  
picture will appear on theTV. For proper  
progressive scan set up, see page 13.  
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
highlight {TV DISPLAY}, then press 2.  
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
2 Press 3 4 to highlight one of the options  
highlight {PROGRESSIVE}, then press 2.  
below:  
OFF  
4:3 PAN SCAN –  
To disable Progressive Scan function.  
Select this if you have  
a normalTV and want  
both sides of the  
ON  
To enable Progressive Scan function.  
picture to be trimmed or formatted to fit  
yourTV screen.  
2 Press 3 4 to select a setting, then press  
OK to confirm your selection.  
4:3 LETTER BOX –  
Select this if you have a  
normalTV. In this case, a  
wide picture with black  
bands on the upper and lower portions of  
theTV screen will  
Follow the instructions shown on the  
TV to confirm the selection (if any).  
If a distorted picture appears on theTV  
screen, wait for 15 seconds for auto  
recovery.  
be displayed.  
16:9 – Select this if  
you have a wide-  
screenTV.  
3 Select an item and press OK.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
29  
01-37 MDV434K_Eng_552  
29  
04/02/05, 4:14 PM  
 
DVD Setup Menu Options  
3 If you select {PERSONAL}, then proceed  
to steps 4~7.  
Picture Setting  
This DVD Player provides three  
predefined sets of picture colour settings  
and one personal setting which you can  
define yourself.  
The ‘PERSONAL PICTURE SETUP’  
menu appears.  
Personal Picture Setup  
Brightness  
Contrast  
TINT  
0
0
0
0
1 In ‘VIDEO SETUP PAGE’, press 3 4 to  
highlight {PICTURE SETTING}, then press  
2.  
COLOR  
STANDARD  
Select this for standard picture setting.  
4 Press 3 4 to highlight one of the  
following options.  
BRIGHT  
Select this will make theTV picture  
brighter.  
BRIGHTNESS  
Increase the value will brighten the  
picture or vice versa. Choose zero (0) for  
average setting.  
SOFT  
Select this will make theTV picture softer.  
CONTRAST  
PERSONAL  
Increase the value will sharpen the picture  
or vice versa. Choose zero (0) to balance  
the contrast.  
Select this to personalise your picture  
colour by adjusting the brightness,  
contrast, tint and colour (saturation).  
TINT  
2 Press 3 4 to select a setting, then press  
Increase the value will darken the picture  
or vice versa. Choose zero (0) for  
average setting.  
OK to confirm your selection.  
COLOUR  
Increase the value will enhance the colour  
in your picture or vice versa. Choose zero  
(0) to balance the colour.  
5 Press 1 2 to adjust the setting that best  
suit your personal preference.  
6 Repeat steps 4~5 for adjusting other  
colour features.  
7 Press OK to confirm.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
30  
01-37 MDV434K_Eng_552  
30  
04/02/05, 4:14 PM  
 
DVD Setup Menu Options  
Preference Page  
Restricting playback by Parental  
Control  
1 Press Ç twice to stop playback (if any),  
Some DVDs may have a parental level  
assigned to the complete disc or to  
certain scenes on the disc. This feature  
lets you set a playback limitation level.  
The rating levels are from 1 to 8 and are  
country dependent. You can prohibit the  
playing of certain discs that are not  
suitable for your children or have certain  
discs played with alternative scenes.  
then press SYSTEM MENU.  
2 Press 1 2 to select thePreference Setup’  
icon.  
3 Press OK to confirm.  
- - Preference Page - -  
Audio  
Subtitle  
Disc Menu  
Parental  
PBC  
1 In ‘PREFERENCE PAGE’, press 3 4 to  
highlight {PARENTAL}, then press 2.  
Password  
Default  
- - Preference Page - -  
Go To Preference Page  
Audio  
1 KID SAFE  
2 G  
3 PG  
4 PG 13  
5 PGR  
6 R  
Subtitle  
Disc Menu  
Parental  
PBC  
Password  
Default  
Audio, Subtitle, Disc Menu  
These menus contain various language  
options for audio, subtitle and disc menu  
which may be recorded on the DVD. For  
details, see page 15.  
7 NC17  
Set KID SAFE  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
31  
01-37 MDV434K_Eng_552  
31  
04/02/05, 4:14 PM  
 
DVD Setup Menu Options  
Restricting playback by Parental  
PBC  
Control - contd  
You can set the PBC to ON or OFF. This  
feature is available only onVideo CD 2.0  
with playback control (PBC) feature. For  
details, see page 19.  
2 Press 3 4 to highlight a rating level for  
the disc inserted and press OK.  
To disable Parental controls and have  
all Discs play, select {8 ADULT}.  
3 Use the numeric keypad (0-9) to enter  
the six-digit password (see page 33  
“Changing the password”).  
DVDs that are rated above the level  
you selected will not play unless you  
enter your six-digit password.  
Helpful Hints:  
VCD, SVCD, CD have no level indication,  
so parental control function has no effect on  
these type of discs.This applies to most  
illegal DVD discs.  
Some DVDs are not encoded with a  
rating though the movie rating may be  
printed on the Disc cover. The rating level  
feature does not work for such Discs.  
To return to the previous menu, press 1.  
To remove the menu, press SYSTEM MENU.  
TIPS:  
32  
01-37 MDV434K_Eng_552  
32  
04/02/05, 4:14 PM  
 
DVD Setup Menu Options  
Changing the Password  
Restoring to original settings  
The same password is used for both  
Parental Control and Disc Lock. Enter  
your six-digit password when prompted  
on the screen. The default password is  
136 900.  
Setting the DEFAULT function will reset  
all options and your personal settings to  
the factory defaults, except your  
password for Parental Control and Disc  
Lock.  
1 In ‘PREFERENCE PAGE’, press 3 4 to  
highlight {PASSWORD}, then press 2 to  
select {CHANGE}.  
1 In ‘PREFERENCE PAGE’, press 3 4 to  
highlight {DEFAULT}, then press 2 to  
select {RESET}.  
2 Press OK to confirm.  
All settings will now reset to factory  
defaults.  
Old Password  
New Password  
Confirm PWD  
OK  
2 Use the numeric keypad (0-9) to enter  
your old six-digit password.  
When doing this for the first time, key  
in ‘136 900’.  
If you forget your old six-digit  
password, key in ‘136 900’.  
3 Enter the new six-digit password.  
4 Enter the new six-digit password a second  
time to confirm.  
The new six-digit password will now  
take effect.  
5 Press OK to confirm.  
To return to the previous menu, press 1.  
TIPS:  
To remove the menu, press SYSTEM MENU.  
33  
01-37 MDV434K_Eng_552  
33  
04/02/05, 4:14 PM  
 
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will  
invalidate the warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If  
you are unable to remedy a problem by following these hints, consult your dealer.  
Problem  
Solution  
No power  
– Check if the AC power cord is properly connected.  
– Press the STANDBY ON on the front of the DVD  
system to turn on the power.  
No picture  
– Refer to yourTV’s manual for correctVideo In  
channel selection. Change theTV channel until you  
see the DVD screen.  
– Check if theTV is switched on.  
– If the progressive scan feature is activated but the  
connectedTV does not support progressive signals  
or the cables are not connected accordingly, see  
page 13 for proper progressive scan set up or  
deactivate the progressive scan feature as below:  
1) Turn off yourTV progressive scan mode or turn on  
to interlaced mode.  
2) Press OPEN/CLOSE to open the disc tray.  
3) Press numeric keypad ‘1on the remote control for  
few seconds.  
Distorted picture  
– Sometimes a small amount of picture distortion may  
appear depending on the disc being played back.This  
is not a malfunction.  
Completely distorted picture or  
black/white picture with DVD  
– Connect DVD Player directly to theTV.  
– Make sure the disc is compatible with the DVD/  
Player.  
– Ensure that the DVD Player’sTVType is set to match  
that of the Disc and yourTV.  
No sound or distorted sound  
No audio at digital output  
– Adjust the volume.  
– Check that the speakers are connected correctly.  
– Check the digital connections.  
– Check if your receiver can decode MPEG-2 or DTS  
and if not, please make sure the digital output is set  
to PCM.  
– Check if the audio format of the selected audio  
language matches your receiver capabilities.  
34  
01-37 MDV434K_Eng_552  
34  
04/02/05, 4:14 PM  
 
Troubleshooting  
Problem  
Solution  
Disc cant be played  
– The DVD+R/CD-R must be finalised.  
– Ensure the disc label is facing up.  
– Check if the disc is defective by trying another disc.  
– If you have recorded a Picture CD or MP3 CD  
yourself, ensure that your disc contains at least 10  
pictures or 5 MP3 tracks.  
– Region code incorrect.  
Picture freezes momentarily  
during playback  
– Check the disc for fingerprints/scratches and  
clean with a soft cloth wiping from centre to edge.  
No return to start-up screen when  
disc is removed  
– Reset the unit by switching the player off, then on  
again.  
The player does not respond to  
the Remote Control  
– Aim the Remote Control directly at the sensor  
on the front of the player.  
– Reduce the distance to the player.  
– Replace the batteries in the Remote Control.  
– Re-insert the batteries with their polarities (+/–  
signs) as indicated.  
Buttons do not work  
To completely reset the player, unplug the AC  
cord from the AC outlet for 5-10 seconds.  
Player does not respond to some  
operating commands during playback.  
– Operations may not be permitted by the disc.  
Refer to the instructions of the disc jacket.  
DVD Player cannot read  
CDs/DVDs  
– Use a commonly available cleaning CD/DVD to  
clean the lens before sending the DVD Player for  
repair.  
Menu items cannot be selected  
– Press STOP twice before selecting System Menu.  
– Depending on the disc availability, some menu items  
cannot be selected.  
Unable to select Progressive Scan on/off – Check that the output of the video signal is switch to  
‘YUV’.  
35  
01-37 MDV434K_Eng_552  
35  
04/02/05, 4:14 PM  
 
Specifications  
AUDIO PERFORMANCE  
TV STANDARD (PAL/50Hz) (NTSC/60Hz)  
DA Converter  
DVD  
24 bit, 192 kHz  
Number of lines  
Playback  
625  
525  
fs 96 kHz  
fs 48 kHz  
fs 48 kHz  
fs 44.1kHz  
fs 44.1kHz  
4Hz- 44kHz  
4Hz- 22kHz  
4Hz- 22kHz  
4Hz- 20kHz  
4Hz- 20kHz  
> 95 dB  
> 85 dB  
> 90 dB  
> 80 dB  
Multistandard (PAL/NTSC)  
SVCD  
VIDEO PERFORMANCE  
Video DAC  
YPbPr  
Video Output  
12 bit, 108mHz  
0.7Vpp — 75 ohm  
1Vpp — 75 ohm  
CD/VCD  
Signal-Noise (1kHz)  
Dynamic range(1kHz)  
Crosstalk (1kHz)  
VIDEO FORMAT  
Digital Compression MPEG 2 for DVD,SVCD  
MPEG 1 forVCD  
Distortion/noise (1kHz)  
MPEG MP3  
MPEG Audio L3  
DVD  
Horiz. resolution  
Vertical resolution  
50Hz  
720 pixels  
576 lines  
60Hz  
720 pixels  
480 lines  
CONNECTIONS  
YPbPr Output  
Video Output  
Cinch 3x  
Cinch (yellow)  
VCD  
50Hz  
60Hz  
Audio Output(L+R) Cinch (white/red)  
Horiz. resolution  
Vertical resolution  
352 pixels  
288 lines  
352 pixels  
240 lines  
Digital Output  
1 coaxial  
IEC60958 for CDDA / LPCM  
IEC61937 for MPEG 1/2,  
Dolby Digital  
AUDIO FORMAT  
Digital  
MPEG/ AC-3/ compressed Digital  
PCM  
16, 20, 24 bits  
fs, 44.1, 48, 96 kHz  
CABINET  
Dimensions (w x h x d)  
Weight  
360 x 37 x 265 mm  
Approximately 2.0 kg  
MP3(ISO 9660) 96, 112, 128, 256  
kbps & variable  
bit rate fs, 32, 44.1,  
48 kHz  
POWER CONSUMPTION  
Power Supply Rating  
Analog Sound Stereo  
Dolby Surround compatible downmix from Dolby Digital  
multi-channel sound  
110-240V;  
50/60Hz  
< 10W  
Power consumption  
Power consumption in Standby mode < 0.8W  
Specifications subject to change without prior notice  
36  
01-37 MDV434K_Eng_552  
36  
04/02/05, 4:14 PM  
 
Glossary  
Analog: Sound that has not been turned into  
numbers. Analog sound varies, while digital sound has  
specific numerical values. These jacks send audio  
through two channels, the left and right.  
Multichannel: DVD is specified to have each sound  
track constitute one sound field. Multichannel refers  
to a structure of sound tracks having three or more  
channels.  
Aspect ratio: The ratio of vertical and horizontal  
sizes of a displayed image.The horizontal vs. vertical  
ratio of conventionalTVs. is 4:3, and that of wide-  
screens is 16:9.  
AUDIO OUT Jacks: Jacks on the back of the DVD  
System that send audio to another system (TV, Stereo,  
etc.).  
Bit Rate: The amount of data used to hold a given  
length of music; measured in kilobits per seconds, or  
kbps. Or, the speed at which you record. Generally,  
the higher the bit rate, or the higher the recording  
speed, the better the sound quality. However, higher  
bit rates use more space on a Disc.  
Chapter: Sections of a picture or a music piece on a  
DVD that are smaller than titles. A title is composed  
of several chapters. Each chapter is assigned a chapter  
number enabling you to locate the chapter you want.  
ComponentVideo Out Jacks: Jacks on the back of  
the DVD System that send high-quality video to aTV  
that has ComponentVideo In jacks (R/G/B, Y/Pb/Pr,  
etc.).  
Disc menu: A screen display prepared for allowing  
selection of images, sounds, subtitles, multi-angles, etc  
recorded on a DVD.  
Digital: Sound that has been converted into  
numerical values. Digital sound is available when you  
use the DIGITAL AUDIO OUT COAXIAL or  
OPTICAL jacks.These jacks send audio through  
multiple channels, instead of just two channels as  
analog does.  
Dolby Digital: A surround sound system developed  
by Dolby Laboratories containing up to six channels  
of digital audio (front left and right, surround left and  
right, center and subwoofer).  
DTS: DigitalTheatre Systems. This is a surround  
sound system, but it is different from Dolby Digital.  
The formats were developed by different companies.  
JPEG: A very common digital still picture format.A  
still-picture data compression system proposed by the  
Joint Photographic Expert Group, which features small  
decrease in image quality in spite of its high  
compression ratio.  
Parental Control: A function of the DVD to limit  
playback of the disc by the age of the users according  
to the limitation level in each country. The limitation  
varies from disc to disc; when it is activated, playback  
will be prohibited if the softwares level is higher than  
the user-set level.  
PCM (Pulse Code Modulation): A system for  
converting analog sound signal to digital signal for  
later processing, with no data compression used in  
conversion.  
Playback control (PBC): Refers to the signal  
recorded on video CDs or SVCDs for controlling  
reproduction. By using menu screens recorded on a  
Video CD or SVCD that supports PBC, you can enjoy  
interactive-type software as well as software having a  
search function.  
Progressive Scan: It displays all the horizontal lines  
of a picture at one time, as a signal frame. This system  
can convert the interlaced video from DVD into  
progressive format for connection to a progressive  
display. It dramatically increases the vertical  
resolution.  
Region code: A system for allowing discs to be  
played back only in the region designated beforehand.  
This unit will only play discs that have compatible  
region codes. You can find the region code of your  
unit by looking on the product label. Some discs are  
compatible with more than one region (or ALL  
regions).  
Surround: A system for creating realistic three-  
dimensional sound fields full of realism by arranging  
multiple speakers around the listener.  
Title: The longest section of a picture or music  
feature on DVD, music, etc., in video software, or the  
entire album in audio software. Each title is assigned a  
title number enabling you to locate the title you want.  
VIDEO OUT jack: Jack on the back of the DVD  
System that sends video to aTV.  
MP3: A file format with a sound data compression  
system.MP3is the abbreviation of Motion Picture  
Experts Group 1 (or MPEG-1) Audio Layer 3. By using  
MP3 format. one CD-R or CD-RW can contain about  
10 times as much data volume as a regular CD can.  
37  
01-37 MDV434K_Eng_552  
37  
04/02/05, 4:14 PM  
 

Indesit Clothes Dryer IDCE 8450 B User Manual
Ingersoll Rand Marine Sanitation System 650002 1 B User Manual
Invacare Mobility Aid 1130213 User Manual
JBL Car Speaker AS5 User Manual
Jura Capresso Coffee Grinder F7 F8 User Manual
JVC Digital Camera GR D271 User Manual
JVC Stereo Receiver kd sx979r User Manual
KitchenAid Food Processor KHB3581 User Manual
Klipsch Speaker AW 650 User Manual
Kodak Scanner i1310 User Manual