Kodak Camera Accessories 2467 User Manual

Computer Output Microfilm  
Data Sheet  
KODAK COM DR Microfilm 2467 / ESTAR Base  
Features  
Description  
• Manufactured to meet ISO and ANSI  
standards for an LE 500 film  
Kodak COM DR Microfilm 2467 (Estar Base) is a  
slow-speed film with a direct reversing emulsion  
that is blue-green sensitive. It has high spectral  
sensitivity in the 430 to 550 nm range.  
• Excellent capture of CRT, formsflash,  
and cutmark  
Minimum adjustments are necessary to  
balance these exposures.  
ProductApplications  
Kodak COM DR Microfilm 2467 is designed for  
use in blue phosphorous CRT (cathode ray tube)  
type computer output microfilmers (COMs).  
These devices photograph data displayed  
electronically rather than from printed  
documents. COM DR Microfilm is “drop-in”  
compatible with roll film COM equipment  
such as Bell & Howell, DatagraphiX 4500, XR,  
3M Beta COM, and graphic COMs such as  
the III Cal Comp. COM DR Microfilm requires  
only conventional processing, and does not  
require the use of a “full reversal” processing  
system, which uses dichromate bleach.  
• Uniform background provides crisp  
diazo copies  
• Low printing density (D-min 0.04-0.05)  
Clearer master characters (D-min) allow for  
higher throughput rates of duplicators.  
• Good exposure and duplication latitude  
The combination of a low D-min and medium  
contrast yields a wider exposure tolerance  
and fewer exposure adjustments of duplicator  
exposure times.  
• Low process sensitivity  
Even as process conditions vary, DR microfilm  
maintains high image quality.  
• Invariant photographic speed  
From batch to batch, there is no need to  
adjust exposure output.  
• Halation protection  
Halation protection eliminates “image  
bloom” caused by reflected light. This is  
particularly important with headers and  
detailed form slides.  
• Process-surviving antistatic backing  
Even after processing, static protection is  
maintained to reduce dirt and dust build-up  
during duplication and handling.  
D-48  
 
Processor Setup Specifications  
Concentrate developer - Kodak COM Professional Developer and Replenisher DRC  
(Typical continuous-strand deep-tank processor)  
Processing  
Step  
Solutions Time  
(Dilutions) (sec.)  
Temperature  
Working Strength  
Specific Gravity  
Replenishment (ml/ft.)  
16 mm 35 mm 105 mm  
Developer DRC1  
1:3  
-
35  
94–95°F(34–35°C)  
90–95°F(32–35°C)  
1.080 to 1.090  
-
1 - 3  
3 - 5  
7.5 - 10*  
Rinse  
17.5  
Flow rate per processor  
manufacturerrecommendation  
Fixer2  
Wash  
1:5  
-
35  
35  
90–95°F(32–35°C)  
90–95°F(32–35°C)  
1.040 to 1.063  
-
0.65  
1.35  
4
Flow rate per processor  
manufacturerrecommendation  
Dry  
-
-
160°Fmax.(71°C)  
-
-
-
-
*Actual replenishment rate is determined by consideration of the rate that achieves a stable D-max with average quantity of  
film processed.  
1 Kodak COM Professional Developer and Replenisher DRC  
2 Kodak Microfilm Fixer and Replenisher  
Development Time and Transport Speed  
These are starting-point recommendations  
for deep-tank processors. Shallow-tank and  
medium-tank processors, or variable operating  
conditions in all processors, may require  
replenishment rate adjustments to maintain  
process activity levels.  
Development/transport times should be set by  
timing film speed (splice point) top of rack, roller-  
to-roller while running in the processor. Transport  
speeds are based on actual dwell times and  
photographic aims, and are determined by timing  
film speed, top of rack, entrance roller to exit  
roller while running in the processor.  
Example  
Processor:  
Type of film:  
Dwell:  
Allen F-10R  
105 mm COM DR  
32 seconds  
6.5 feet  
Replenishment Rates  
Developer Film Path:  
Once development time and transport rates  
are set to acquire desired photographic aims,  
replenishment rate settings are determined by  
multiplying the transport speed by the required  
replenishment rates for the appropriate film width  
being used. Replenishment may be reduced if  
significant quantities of leader are used. For  
instance, with Kodak COM Professional  
Developer and Replenisher DRC, practical  
experience indicates rates as low as 7.5 mL/ft  
of 105 mm film are adequate in deep tank  
processors. The use of control charts such  
as Kodak Publication A-1631 is recommended  
for monitoring control.  
See table above for:  
Replenishment (Dev): 7.5  
Replenishment (Fix):  
4
Calculated transport speed:  
6.5 feet x 60 sec  
= 12 ft / min  
32 sec  
min  
Replenishment results:  
12 feet x 7.5 mL  
= 90 mL / min*  
(developer replenishment)  
min  
feet  
Transport Replenishment/ Replenishment  
speed  
(ft/min)  
x
ft of film  
(mL/Lft)  
=
rate  
(mL/min*)  
12 feet x 4 mL  
min feet  
= 48 mL / min*  
(fixer replenishment)  
*1 mL/min = 1 cc/min  
3
D-48  
 
Characteristic Curve  
Spectral Sensitivity Curve  
Kodak COM DR Microfilm 2467/Estar Base  
Kodak COM Professional Developer and Replenisher DRC  
Kodak COM DR Microfilm 2467/Estar Base  
Kodak COM Professional Developer and Replenisher DRC  
95°F (35°C), 3.6 fpm;  
36 sec., 95°F (35°C);  
Diffuse visual  
1.4 sec. exposure  
3
2
1
0
2
1
0
-1  
D=1.0 fixed  
D=.15 fixed  
-3.00  
-2.00  
-1.00  
0.00  
1.00  
2.00  
3.00  
-2  
250  
300  
350  
400  
450  
500  
550  
600  
650  
700  
750  
Log Exposure (lux seconds)  
Wavelength (nm)  
Modulation Transfer Function Curve  
Process Cycle Adjustment Guide  
Equivalent Time/Temperature Conditions  
Kodak COM DR Microfilm 2467/Estar Base  
35% Modulation  
1000  
100  
10  
101  
100  
99  
98  
97  
96  
95  
94  
93  
92  
91  
90  
89  
88  
87  
86  
85  
84  
23  
35  
40  
60  
DEVELOPMENT TIME (seconds)  
1
1
10  
100  
SPATIAL FREQUENCY (cycles/mm)  
1000  
The MTF curve was determined using a method  
similar to that described in ANSI PH2.39-1977  
(R1990).  
The above chart can be used to determine  
other development time/temperature  
combinations that provide equivalent  
photographic quality. Temperatures between  
90 and 100°F (32 and 37.8°C) are optimum  
for total system performance.  
Notice: While the data presented are typical of production coatings, they do not represent standards which must be met by  
Eastman Kodak Company. Varying storage, exposure, and processing conditions will affect results. The company reserves  
the right to change and improve the product characteristics at any time.  
After-ProcessInformation  
Keeping  
This film is suitable for archival keeping when processed as recommended. However, due to possible  
variations in conditions, it is recommended that users establish their own compliance with existing  
archival-keeping requirements as outlined in pertinent standard ANSI/NAPM IT9.1-1996, ISO 10602 -  
1995, and in Kodak Booklet D-31. This film is within thiosulfate limits for microfilm, when processed  
according to manufacturer’s recommendations.  
D-48  
4
 
OrderingInformation:Microfilms  
Film Format  
Spec.  
Package  
Core  
COMs  
CAT Number  
16 mm x 75 m  
642  
Bulk Pack  
T
Bell & Howell  
119-8894  
Emulsion IN  
2 in. OD, 16 mm  
1 in. round center  
16 mm x 150 m  
16 mm x 190 m  
16 mm x 200 m  
642  
482  
640  
Bulk Pack  
Emulsion IN  
T
Bell & Howell  
DX-4500  
899-2703  
860-0959  
885-5843*  
2 in. OD, 16 mm  
1 in. round center  
Com-Pack  
Cartridge  
Emulsion IN  
T
DatagraphiX-XR  
Agfa COM  
2 in. OD, 16 mm  
1 in. round center  
Bulk Pack  
Z
DatagraphiX  
XR  
Emulsion OUT  
For reloadable  
cassettes only  
3 in. OD, 16 mm  
1 in. round center  
16 mm x 380 m  
35 mm x 75 m  
105 mm x 75 m  
649  
756  
Bulk Pack  
Emulsion IN  
Long length  
Z
DatagraphiX  
4500  
875-0663*  
871-1947  
882-0847  
3 in. OD, 16 mm  
1 in. round center  
Bulk Pack  
Emulsion IN  
1 in. round center  
U
Graphic COMs  
III, Dicomed  
2 in. OD, 35 mm  
827 Room light load  
Emulsion IN  
UU  
Bell & Howell  
3M Beta COM  
Graphic-III  
2 in. OD, 105 mm  
1 in. round center  
Dicomed  
105 mm x 200 m 827 Room light load  
Emulsion IN  
UU  
Agfa COM  
183-8812  
894-6766  
2 in. OD, 105 mm  
1 in. round center  
105 mm x 20 m  
890  
Bulk Pack  
UU  
DatagraphiX  
Emulsion OUT  
For reloadable  
cassettes only  
2 in. OD, 105 mm  
1 in. round center  
(with reloadable  
cartridge only)  
105 mm x 200 m 906  
Bulk Pack  
Emulsion IN  
UU  
DatagraphiX  
Agfa COM  
(Model 2500 or  
3000 only)  
852-9802  
2 in. OD, 105 mm  
1 in. round center  
* For Service Bureau use only.  
5
D-48  
 
Ordering Information: Chemicals  
Chemical  
CAT Number  
Working Strength Solutions  
COMProfessionalDEVELOPERANDReplenisherDRC  
At 1:3 yields  
16 gal  
1 gal—4/case  
55gal—1drum  
2 x 5 litres  
863-0683*  
865-9591*  
524-4637**  
220gal  
40 litres  
Microfilm FIXER AND Replenisher—Concentrate  
At 1:5 yields  
24 gal  
1 gal—4/case  
5 gal—1 cube  
50gal—1drum  
2 x 5 litres  
817-7222  
190-1149  
30 gal  
190-1164  
300gal  
504-4706**  
523-6245**  
524-2086**  
60 litres  
60 litres  
360 litres  
2 x 5 litres  
60 litres  
* For Service Bureau use only.  
** Not available in the U.S.  
Material Safety Data Sheets (MSDSs) on the chemicals (only) are available by calling 1-800-242-2424, extension 43. You will  
need to supply the KODAK CAT numbers of the chemicals for which you need MSDSs. Material Safety Data Sheets for the  
actual working solutions and caution labels for the processor tanks are also available by calling the same number.  
EASTMAN KODAK COMPANY  
Document Imaging  
Rochester, NY 14650  
1-800-243-8811  
KODAKCANADAINC.  
Document Imaging  
Toronto, Ontario M6M 1V3  
1-800-465-6325  
Kodak, Estar, Versamat, and Com-Pack  
are trademarks.  
KODAK COM DR Microfilm 2467  
Kodak Publication No. D-48  
CATNo. 195-2456 3/2002  
Printed in U.S.A.  
© Eastman Kodak Company, 2002  
 

JL Audio Car Stereo System HD600 4 User Manual
JVC Camera Accessories GY HM700CHE User Manual
JVC DVR LVT2016 001D User Manual
JVC TV Receiver LT 32E478 User Manual
Kalorik Work Light PPG 40741 User Manual
Karcher Pressure Washer G 2401 OH User Manual
Karcher Pressure Washer K 1400 User Manual
Kenwood Stereo Amplifier KAC X520 User Manual
Keys Fitness Home Gym KPS ABM User Manual
Klipsch Speaker AW 650 User Manual