Klipsch Speaker KL 6502 THX User Manual

In-Wall LCR Loudspeaker  
KL-6502-THX  
• THX Select2-certified for superior sound  
• Horn-loaded for high efficiency and low distortion  
• Easily mounts horizontally or vertically  
• Maximum installation reliability  
The KL-6502-THX delivers effortless  
dynamic range and brings superior sound  
to larger areas thanks to its highly regarded  
THX Select2 certification.  
• Mix and match with our other THX products  
It employs dual 5.25-inch woven fiberglass  
woofers for amazingly accurate sound, as  
well as a titanium tweeter mated to an  
exclusive Tractrix® Horn for flat in-room  
frequency response with high efficiency and  
low distortion. The speaker’s precision-  
voiced crossover networks further ensure  
that the high and low frequencies are faith-  
fully reproduced.  
S p e c i f i c a t i o n S  
Frequency response  
Power handling  
46Hz-20kHz +/-3dB  
100W continuous / 400W peak  
150W  
Recommended amplifier power  
Sensitivity  
92dB @ 2.83V / 1m  
8 ohms compatible  
This in-wall speaker also consistently deliv-  
ers thrilling, realistic sound, whether it’s  
installed horizontally or vertically. It fea-  
tures all-new sure-grip mounting dogs that  
provide even pressure against drywall for  
long-term installation reliability, and includes  
a paintable grille that blends in perfectly with  
any décor.  
Nominal impedance  
High frequency drivers  
1” (2.5cm) Titanium diaphragm  
compression driver mated to  
90° x 90° square Tractrix® Horn  
High freq crossover  
2100Hz & 1200Hz  
Low frequency drivers  
Dual 5.25” (13.3cm) high-output,  
fiberglass cone woofers  
Furthermore, the KL-6502-THX offers  
unlimited flexibility. It is timbre matched to  
all of our THX-certified products, so you  
can mix and match to create an unbeatable,  
discreet stereo or home theater system  
that’s just right for you.  
Enclosure material  
MDF & Aluminum motorboard /  
ABS frame  
Enclosure type  
Dimensions  
Infinite baffle, front flush with wall  
17.75” (45.1cm) H x 8” (20.3cm) W  
3.75” (9.5cm)  
Mounting depth  
Cutout dimensions  
Installation kit  
Weight  
16.5” (41.9cm) H x 6.5” (16.5cm) W  
IK-502-W (sold seperately)  
9.6lbs (4.4kg)  
Finishes  
White paintable frame and grille  
1-800-KLIPSCH  
All specifications are subject to change without notice. ©2008  
 

Infiniti Speaker Beta C250 User Manual
Insignia Flat Panel Television NS LCD19W 09 User Manual
Iomega Computer Drive HotBurn User Manual
Jackson Gas Grill 700 Series User Manual
Jacuzzi Hot Tub 4480 LH User Manual
John Deere GPS Receiver PC20235 User Manual
Kenwood Coffeemaker ES020 User Manual
Kenwood Slow Cooker CP706 User Manual
KitchenAid Oven KEBI141YBL4 User Manual
Kodak DVD Player DVD 40 User Manual