Welcome to the world of KitchenAid®.
We’re committed to helping you
create a lifetime of delicious meals for
family and friends. To help ensure the
longevity and performance of your
appliance, keep this guide handy.
It will empower you with the best way
to use and care for your product. Your
satisfaction is our #1 goal. Remember
to register your product online at
mail using the attached
Product Registration Card.
USA: 1.800.541.6390
Canada: 1.800.807.6777
KitchenAid.com
KitchenAid.ca
2
Table of Contents
FOOD PROCESSOR SAFETY
Important Safeguards.................................................................................................4
Electrical Requirements.............................................................................................5
PARTS AND FEATURES................................................................................................6
ACCESSORIES
Included Accessories .................................................................................................7
Accessories Selection Guide......................................................................................8
PREPARING THE FOOD PROCESSOR FOR FIRST USE ........................................9
SETTING UP YOUR FOOD PROCESSOR
Attaching the Work Bowl........................................................................................10
Attaching the Work Bowl Cover.............................................................................10
Installing the Adjustable Slicing Disc ........................................................................11
Installing the Reversible Shredding Disc ..................................................................11
Installing the Multipurpose Blade.............................................................................12
Using the 2-in-1 Feed Tube .....................................................................................12
USING YOUR FOOD PROCESSOR
Before Use ..............................................................................................................13
Maximum Liquid Level ............................................................................................13
Using the Low/High Speed Control ........................................................................13
Using the Pulse Control ..........................................................................................13
Removing Processed Foods.....................................................................................14
CLEANING THE FOOD PROCESSOR......................................................................15
FOOD PROCESSING TIPS
Tips for Great Results..............................................................................................16
Helpful Hints............................................................................................................18
TROUBLESHOOTING.................................................................................................19
WARRANTY...................................................................................................................20
Find recipes and more at
3
Food Processor Safety
Electrical Requirements
Volts: 120 V.A.C.
Hertz: 60 Hz
NOTE: This Food Processor is equipped
with a polarized plug (one blade is wider
than the other). To reduce the risk of
electrical shock, this plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any
way.
Proof of Purchase & Product Registration
Always keep a copy of the itemized sales receipt showing the date of purchase of your
Food Processor. Proof of purchase will assure you of in-warranty service. Before you use your
Food Processor, please fill out and mail your product registration card packed with the unit.
This card will enable us to contact you in the unlikely event of a product safety notification
and assist us in complying with the provisions of the Consumer Product Safety Act. This card
does not verify your warranty. Please complete the following for your personal records:
Model Number________________________________________________________
Serial Number ________________________________________________________
Date Purchased _______________________________________________________
Store Name __________________________________________________________
5
Parts and Features
Adjustable Slicing
Disc Thin to Thick
Multipurpose
Stainless Steel
Blade
Reversible
(2 mm and 4 mm)
Shredding Disc
2-Piece
Food Pusher
Shredding
Adapter
Work Bowl
Cover with
2-in-1 Feed
Tube
7-Cup (1.7 L)
Work Bowl
Heavy-Duty
Base
6
Parts and Features
Important parts and accessories included with your new Food Processor are highlighted
below. Refer to the following pages for additional details on accessories included with your
Food Processor.
Adjustable Slicing
2-Piece Food Pusher (KFP07FTP)
The 2-Piece food pusher allows you to select
a large feed tube opening for continuous
processing, or a smaller opening depending
on the task.
For continuous processing of smaller items
(like herbs, nuts, single carrots, and celery),
remove the narrow pusher and use the
narrow feed tube.
A small hole in the bottom of the narrow
pusher makes it easy to drizzle oil into
ingredients – just fill with the desired
amount of oil or other liquid ingredient.
KitchenAid’s® adjustable slicing disc allows
you to manually adjust slicing thickness from
thin to thick.
High/Low/Pulse/Control
Two speeds and Pulse provide precise
control to give great results with most
any food.
Work Bowl Cover with 2-in-1 Feed Tube
(KFP07LSFT)
One of the industry’s largest, the 2-in-1
feed tube accommodates large items such
as tomatoes, cucumbers, and potatoes with
a minimum of sectioning or slicing.
Heavy-Duty Base
The heavy, slip-resistant base helps
provide improved stability and reduced
vibration during tough food processing jobs.
Accessories
Included Accessories
7-Cup (2.0 L) Work Bowl (KFP07WBOB)
The durable, large work bowl provides
capacity for large jobs.
Drive Adapter
The drive adapter is used to connect the
slicing/shredding disc to the power shaft
on the base.
Adjustable Slicing Disc (KFP07ASL)
Disc is adjustable from approximately
1/16 inch (1 mm) to 1/4 inch (6 mm) for
slicing most foods.
Multipurpose Blade (KFP07BL)
Versatile blade chops, minces, blends, mixes,
and emulsifies in a matter of seconds.
Reversible Shredding Disc (KFP07RD)
Shredding disc is reversible to allow coarse
or finely shredded cheese or vegetables.
7
Accessories
Accessories Selection Guide
Action
Setting
Food
Accessory
Cheese
Chocolate
Fruit
Fresh herbs
Nuts
Multipurpose Blade
Chop
Tofu
Vegetables
Mince
Mix
Puree
Pasta Sauce
Pesto
Salsa
Sauces
Fruit (soft)
Potatoes
Adjustable Slicing Disc
Tomatoes
Vegetables (soft)
Slice
Thin
Slice
Thick
Cheese
Chocolate
Fruit (hard)
Vegetables (hard)
Potatoes
Reversible Shredding Disc
Vegetables (soft)
Cabbage
Cheese
Shred Shred
Medium Fine
Chocolate
Fruit (hard)
Vegetables (hard)
8
Preparing the Food Processor for First Use
Before First Use
Before using your Food Processor for the
first time, wash all parts and accessories
either by hand or in the dishwasher (see
“Cleaning the Food Processor” section).
Removing the Work
Bowl Cover from the
Work Bowl
Your Food Processor is shipped with the
work bowl cover installed on the work bowl.
To remove the work bowl cover from
the work bowl for initial cleaning:
1. Grasp the feed tube on the work bowl
cover and turn it clockwise to remove
it from the work bowl.
9
Setting Up Your Food Processor
Attaching the Work Bowl
Attaching the Work
Bowl Cover
1. Place the Food Processor on a dry,
level countertop with the controls
facing forward. Do not plug in the Food
Processor until it is completely assembled.
2. Place the work bowl on the base, aligning
the raised portion with the indentation on
the base. The center hole should fit over
the power shaft.
1. Place the work bowl cover on the work
bowl with the feed tube just to the left
of the work bowl handle. Grasp the feed
tube and turn the cover to the right until
it locks into place.
Power Shaft
2. Fit the food pusher into the 2-in-1
feed tube. See “Using the 2-in-1 Feed
Tube” section for details on working with
different sized foods.
3. Grasp the work bowl handle and turn
the bowl counterclockwise to lock it
on the base.
NOTE: Your Food Processor will not
operate unless the work bowl and work
bowl cover are properly locked on
the base.
Food
Pusher
4. Select the accessory you would like to use
and install it according to the instructions
on the following pages.
NOTE: Be sure to install the desired
accessory before attaching the work
bowl cover.
NOTE: Be sure to install the desired
accessory before attaching the work
bowl cover.
10
Setting Up Your Food Processor
Installing the Reversible
Shredding Disc
1. Holding the reversible shredding disc
by the 2 finger grips, insert the shredding
adapter into the hole in the bottom of
the disc.
Installing the Adjustable
Slicing Disc
The Adjustable Slicing Disc is easily adjusted
and makes slicing tasks simple. Follow
these steps for adjusting and installing the
Adjustable Slicing Disc.
Finger Grip
1. Holding the slicing disc, twist the
ridged portion of the shaft clockwise
for thinner slices, or counterclockwise
for thicker slices.
2. With the work bowl installed, slide the
drive adapter onto the power shaft.
TIP: You may need to turn the disc/
adapter until it drops down into place.
Finger Grip
Finger Grip
2. With the work bowl installed, hold
the slicing disk by the finger grips and
lower it onto the drive adapter.
TIP: You may need to turn the disc/drive
adapter until it drops down into place.
3. Install the work bowl cover, being sure
it locks into place.
Finger Grip
3. Install the work bowl cover, being sure
it locks into place.
11
Setting Up Your Food Processor
Installing the
Using the 2-in-1 Feed Tube
The 2-in-1 feed tube
features a 2-piece
food pusher. To slice
or shred small items,
insert the 2-piece
food pusher into the
feed tube.
Multipurpose Blade
1. Place the blade on the power shaft.
2-Piece
Food
Pusher
2. Rotate the blade so it falls into place
on the power shaft.
Use the small feed
tube and pusher to
process small or
slender items, like
single carrots or
celery stalks.
To slowly drizzle oil
into ingredients, just
fill the small pusher
with the desired
amount of oil.
A small hole in the
bottom of the
pusher will drizzle the oil at a constant rate.
3. Push to lock: Press down firmly on the
multipurpose blade until it is down as
far as it will go. The multipurpose blade
features an internal seal that fits tightly
over the center of the work bowl.
4. Install the work bowl cover, being sure
it locks into place. See “Attaching the
Work Bowl Cover” section.
12
Using Your Food Processor
Using the Low/High Speed
Control
1. To turn on the Food Processor, press
the Low or High button. The Food
Processor will run continuously and the
indicator light will glow.
2. To stop the Food Processor, press the
OFF button. The indicator light will go
out and the blade or disc will stop
within a few seconds.
3. Wait until the blade or disc comes to a
complete stop before removing the work
bowl cover. Be sure to turn off the Food
Processor before removing the work
bowl cover, or before unplugging the
Food Processor.
NOTE: If the Food Processor fails to
operate, make sure the work bowl and
cover are properly locked on the base
(see “Setting Up Your Food Processor”).
Before Use
Before operating the Food Processor,
be sure the work bowl, blades, and work
bowl cover are properly assembled on
the Food Processor base (see “Setting
Up Your Food Processor”).
Using the Pulse Control
The pulse control allows precise control of
the duration and frequency of processing.
It’s great for jobs which require a light touch.
Just press and hold the PULSE Button to
start processing at high speed, and release
it to stop.
Maximum Liquid Level
This line on the work bowl indicates
the maximum level of liquid that can
be processed by the Food Processor.
13
Using Your Food Processor
5. Turn the work bowl to the left to unlock
it from the base. Lift to remove.
Removing Processed Foods
1. Press the OFF Button.
2. Unplug the Food Processor
before disassembling.
3. Turn the work bowl cover
to the left and remove.
6. The multipurpose blade can be removed
from the work bowl before the contents
are emptied. You may also leave the blade
locked in place. Then remove food from
the bowl and blade with a spatula.
4. If using a disc, remove it before
removing the bowl. Holding the disc
by the 2 finger grips, lift it straight up.
Remove the adapter when using the
Shredding Disc.
Finger
Grip
14
Cleaning the Food Processor
6. To prevent damage to the locking system,
always store the work bowl and work
bowl cover in the unlocked position
when not in use.
1. Press the OFF Button.
2. Unplug the Food Processor
before cleaning.
3. Wipe the base and cord with a warm,
sudsy cloth, and wipe clean with a damp
cloth. Dry with a soft cloth. Do not use
abrasive cleansers or scouring pads.
4. Please note these BPA-free bowls require
special handling. If you choose to use
a dishwasher instead of hand washing,
please follow these guidelines.
- All parts are top rack dishwasher safe.
- Avoid laying the bowl on its side.
- Use gentle dishwashing cycles such
as Normal. Avoid high temperature
cycles such as Sanitize, Steam, and
Pot Scrubbing.
7. Wrap the power cord around the work
bowl. Secure the plug by clipping it to
the cord.
5. If washing the Food Processor parts by
hand, avoid the use of abrasive cleansers
or scouring pads. They may scratch or
cloud the work bowl and cover.
Thoroughly dry all parts after washing.
15
Food Processing Tips
To chop nuts or make nut butters:
Process up to 3 cups (710 ml) of nuts
to desired texture, using short pulses,
1 to 2 seconds each time. For a coarser
texture, process smaller batches, pulsing
1 or 2 times, 1 to 2 seconds each time.
Pulse more often for finer texture. For
nut butters, process continuously until
smooth. Store in refrigerator.
Tips for Great Results
NOTE: Processing nuts and other hard
foods may scratch the surface finish on
the inside of the bowl.
Using the Multipurpose Blade
To chop fresh fruits
or vegetables:
To chop cooked or raw meat, poultry
or seafood:
The food should be very cold. Cut in
1-inch (2.5 cm) pieces. Process up to
1 pound (455 g) at a time to desired size,
using short pulses, 1 to 2 seconds each time.
Scrape sides of bowl, if necessary.
Peel, core, and/or remove seeds.
Cut food in 1 to 11/2-inch
(2.5-3.75 cm) pieces. Process
food to desired size, using short pulses, 1 to
2 seconds each time. Scrape sides of bowl,
if necessary.
To puree cooked fruits and vegetables
(except potatoes):
Add 1/4 cup (60 ml) liquid from recipe per
cup (235 ml) of food. Process food, using
short pulses, until finely chopped. Then
process continuously until reaching desired
texture. Scrape sides of bowl, if necessary.
To make bread, cookie,
or cracker crumbs:
Break food into 11/2 to 2-inch (3.75-5 cm)
pieces. Process until fine. For larger pieces,
pulse 2 to 3 times, 1 to 2 seconds each time.
Then process until fine.
To prepare mashed potatoes:
To melt chocolate in a recipe:
Shred hot cooked potatoes using the
shredding disc. Exchange shredding disc
for multipurpose blade. Add softened butter,
milk, and seasonings. Pulse 3 to 4 times,
2 to 3 seconds each time, until smooth and
milk is absorbed. Do not over process.
Combine chocolate and sugar from recipe
in work bowl. Process until finely chopped.
Heat liquid from recipe. With processor
running, pour hot liquid through the feed
tube. Process until smooth.
To grate hard cheeses, such as Parmesan
and Romano:
To chop dried (or sticky) fruits:
The food should be cold. Add 1/4 cup
(60 ml) flour from recipe per 1/2 cup
(120 ml) dried fruit. Process fruit, using
short pulses, until reaching desired texture.
Never attempt to process cheese that
cannot be pierced with the tip of a sharp
knife. You can use the multi-purpose blade
to grate hard cheeses. Cut cheese in 1-inch
(2.5 cm) pieces. Place in work bowl. Process,
using short pulses, until coarsely chopped.
Process continuously until finely grated. Pieces
of cheese can also be added through the feed
tube while the processor is running.
To finely chop citrus peel:
With sharp knife, peel colored portion
(without white membrane) from citrus.
Cut peel in small strips. Process until
finely chopped.
To mince garlic or to chop fresh herbs
or small quantities of vegetables:
With processor running, add food through
the feed tube. Process until chopped. For
best results, make sure work bowl and
herbs are very dry before chopping.
16
Food Processing Tips
Using a Slicing or Shredding Disc
To slice or shred fruits and vegetables
that are small, such as strawberries,
mushrooms, and radishes:
Position food vertically or horizontally in
layers within the feed tube. Fill feed tube
in order to keep food positioned properly.
Process using even pressure with the
food pusher. Or use the small feed tube
in the two-piece food pusher. Position
food vertically in the tube and use the
small food pusher to process food.
To slice uncooked meat or poultry,
such as stir-fry meats:
Cut or roll food to fit feed tube. Wrap
and freeze food until hard to the touch,
30 minutes to 2 hours, depending on
thickness of food. Check to be sure you
can still pierce food with the tip of a sharp
knife. If not, allow to thaw slightly. Process
using even pressure with the food pusher.
To slice cooked meat or poultry,
including salami, pepperoni, etc.:
Food should be very cold. Cut in pieces
to fit feed tube. Process food using firm,
even pressure with the food pusher.
To slice or shred fruits or
vegetables that are long and
relatively small in diameter,
such as celery, carrots, and bananas:
Cut food to
fit feed tube
To shred spinach and other leaves:
vertically or
Stack leaves. Roll up and stand up in feed
tube. Process using even pressure with
the food pusher.
horizontally, and
pack feed tube
securely to keep
food positioned
properly. Process
using even
pressure with
the food pusher.
Or use the small
feed tube in the
two-piece food
pusher. Position food vertically in the tube
and use the small food pusher to process
food.
To slice or shred fruits and vegetables
that are round, such as onions, apples,
and green peppers:
Peel, core, and remove seeds. Cut in halves
or quarters to fit feed tube. Position in feed
tube. Process using even pressure with the
food pusher.
To shred firm and soft
cheeses:
Firm cheese should be very cold. For best
results with soft cheeses, such as mozzarella,
freeze 10 to 15 minutes before processing.
Cut to fit feed tube. Process using even
pressure with the food pusher.
17
Food Processing Tips
• Different foods require varying degrees
of pressure for best shredding and slicing
results. In general, use light pressure
for soft, delicate foods (strawberries,
tomatoes, etc.), moderate pressure for
medium foods (zucchini, potatoes, etc.),
and firmer pressure for harder foods
(carrots, apples, hard cheeses, partially
frozen meats, etc.).
Helpful Hints
• To avoid damage to the blade or motor,
do not process food that is so hard or
firmly frozen that it cannot be pierced
with the tip of a sharp knife. If a piece
of hard food, such as a carrot, becomes
wedged or stuck on the blade, stop the
processor and remove the blade. Gently
remove food from the blade.
• When preparing a cake or cookie batter
or quick bread, use the multipurpose
blade to cream fat and sugar first. Add dry
ingredients last. Place nuts and fruit on top
of flour mixture to prevent over chopping.
Process nuts and fruits, using short pulses,
until blended with other ingredients. Do
not over process.
• Do not overfill work bowl. For thin
mixtures, fill work bowl up to 1/2 to 2/3
full. For thicker mixtures, fill work bowl
up to 3/4 full. For liquids, fill up to the
maximum level as described in the “Using
Your Food Processor” section of this
book. When chopping, the work bowl
should be no more than 1/3 to 1/2 full.
• When shredded or sliced food piles up on
one side of the bowl, stop the processor
and redistribute the food using a spatula.
• When food quantity reaches the bottom
of a slicing or shredding disc, remove the
food.
• Position slicing discs so the cutting surface
is just to the right of the feed tube. This
allows the blade a full rotation before
contacting the food.
• To capitalize on the speed of the
processor, drop ingredients to be
chopped through the feed tube while the
processor is running.
• A few larger pieces of food may remain on
top of the disc after slicing or shredding.
If desired, cut these by hand and add to
mixture.
• Soft and medium-hard cheese may spread
out or roll up on the shredding disc. To
avoid this, shred only well-chilled cheese.
• Organize processing tasks to minimize
bowl cleanup. Process dry or firm
ingredients before liquid ingredients.
• Sometimes slender foods, such as
carrots or celery, fall over in the feed
tube, resulting in an uneven slice. To
minimize this, cut food in several pieces
and pack the feed tube with the food.
For processing small or slender items,
the small feed tube in the two piece food
pusher will prove especially convenient.
• To clean ingredients from the
multipurpose blade easily, just empty
the work bowl, replace the lid, and pulse
1 to 2 seconds to spin the blade clean.
• After removing the work bowl cover,
place it upside down on the counter.
This will help keep the counter clean.
• Your Food Processor is not designed to
perform the following functions:
- Grind coffee beans, grains, or
hard spices
- Grind bones or other inedible
parts of food
- Liquefy raw fruits or vegetables
- Slice hard-cooked eggs or unchilled
meats.
• If any plastic parts should discolor due to
the types of food processed, clean them
with lemon juice
18
Troubleshooting
If your Food Processor should malfunction or fail to operate,
check the following:
Food Processor doesn’t run:
• Make sure that the bowl and lid are
properly aligned and locked in place.
• Press only one button at a time.
The Food Processor will not operate if
more than one button is pressed at the
same time.
Food Processor not shredding
or slicing properly:
• Make sure the raised-blade side
of the disc is positioned face up on
the common adapter.
• If using the adjustable slicing blade,
make sure it is set to the correct
thickness.
• Is the Food Processor plugged in?
• Make sure ingredients are suitable
for slicing or shredding. See “Food
Processing Tips”
If the work bowl cover won’t close
when using the disc:
• Make sure the disc is installed correctly,
with the raised nub on top, and is
positioned properly on the drive adapter.
• Is the fuse in the circuit to the Food
Processor in working order? If you
have a circuit breaker box, be sure
the circuit is closed.
• Unplug the Food Processor, then plug
it back into the outlet.
• If the Food Processor is not at room
temperature, wait until it reaches room
temperature and retry.
Nub
If the problem is not due to one of the
above items, see “Warranty”.
Do not return the Food Processor to the
retailer. Retailers do not provide service.
19
Warranty
KitchenAid® Food Processor Warranty for the 50 United States,
the District of Columbia, Puerto Rico, and Canada
This warranty extends to the purchaser and any succeeding owner for Food Processors
operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada.
Length of Warranty:
One Year Full Warranty from date of purchase.
KitchenAid Will Pay
for Your Choice of:
Hassle-Free Replacement of your Food Processor.
See the next page for details on how to arrange for service,
or call the Customer Satisfaction Center toll-free at
1-800-541-6390.
OR
The replacement parts and repair labor costs to correct
defects in materials and workmanship. Service must be
provided by an Authorized KitchenAid Service Center.
KitchenAid Will
Not Pay for:
A. Repairs when Food Processor is used in other than
normal single family home use.
B. Damage resulting from accident, alteration, misuse or
abuse.
C. Any shipping or handling costs to deliver your Food
Processor to an Authorized Service Center.
D. Replacement parts or repair labor costs for Food
Processors operated outside the 50 United States,
District of Columbia, Puerto Rico, and Canada.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED
TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY
BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST PERIOD
ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS
OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY
TO YOU.
IF THIS PRODUCT FAILS TO WORK AS WARRANTED, CUSTOMER’S SOLE AND
EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE
TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA
DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES. This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province.
20
Warranty
Hassle-Free Replacement Warranty –
50 United States, District of Columbia, and Puerto Rico
We’re so confident the quality of our
products meets the exacting standards of
KitchenAid that, if your Food Processor
should fail within the first year of ownership,
KitchenAid will arrange to deliver an
identical or comparable replacement to
your door free of charge and arrange to
have your original Food Processor returned
to us. Your replacement unit will also be
covered by our one year limited warranty.
Please follow these instructions to receive
this quality service.
free Customer Satisfaction Center at
1-800-541-6390 Monday through Saturday.
Please have your original sales receipt
available when you call. Proof of purchase
will be required to initiate the claim. Give
the consultant your complete shipping
address. (No P.O. Box numbers, please.)
When you receive your replacement Food
Processor, use the carton and packing
materials to pack up your original Food
Processor. In the carton, include your name
and address on a sheet of paper along with
a copy of the proof of purchase (register
receipt, credit card slip, etc.).
If your Food Processor should fail within the
first year of ownership, simply call our toll-
Hassle-Free Replacement Warranty – Canada
We’re so confident the quality of our
include your name and complete shipping
address along with a copy of the proof of
purchase (register receipt, credit card slip,
etc.). Your replacement Food Processor
will be returned prepaid and insured. If you
are unable to obtain satisfactory service
in this manner call our toll-free Customer
Interaction Centre at 1-800-807-6777.
products meets the exacting standards of
the KitchenAid® brand that, if your Food
Processor should fail within the first year of
ownership, KitchenAid Canada will replace
your Food Processor with an identical or
comparable replacement. Your replacement
unit will also be covered by our one year
limited warranty. Please follow these
Or write to us at:
instructions to receive this quality service.
Customer eXperience Centre
KitchenAid Canada
If your Food Processor should fail within
the first year of ownership, take the Food
Processor or ship collect to an Authorized
KitchenAid Service Centre. In the carton
200 - 6750 Century Ave.
Mississauga, ON L5N 0B7
Arranging for Service after the Warranty Expires, or
Ordering Accessories and Replacement Parts
For service information in Canada:
In the United States and Puerto Rico:
Call toll-free 1-800-807-6777.
For service information, , or to order
accessories or replacement parts, call toll-
free at 1-800-541-6390 or write to:
Customer Satisfaction Center,
Or write to:
Customer eXperience Centre
KitchenAid Canada
KitchenAid Portable Appliances,
200 - 6750 Century Ave.
Mississauga, ON L5N 0B7
P.O. Box 218, St. Joseph, MI 49085-0218
Outside the United States
and Puerto Rico:
Consult your local KitchenAid dealer or
the store where you purchased the Food
Processor for information on how to obtain
service.
21
|