Kicker Speaker S10X User Manual

AcousticsLimitedWarranty  
Kicker warrants this product to be free from defects in material and workmanship under normal use for a period of  
THREE (3) MONTHS from date of original purchase with receipt. When purchased from an Authorized KICKER  
Dealer it is warranted for ONE (1) YEAR from date of original purchase with receipt. In all cases you must have the  
original receipt. Should service be necessary under this warranty for any reason due to manufacturing defect or  
malfunction during the warranty period, Kicker will repair or replace (at its discretion) the defective merchandise with  
equivalent merchandise at no charge. Warranty replacements may have cosmetic scratches and blemishes.  
Discontinued products may be replaced with more current equivalent products.  
This warranty is valid only for the original purchaser and is not extended to owners of the product subsequent to the  
original purchaser. Any applicable implied warranties are limited in duration to a period of the express warranty as  
provided herein beginning with the date of the original purchase at retail, and no warranties, whether express or  
implied, shall apply to this product thereafter. Some states do not allow limitations on implied warranties; therefore  
these exclusions may not apply to you. This warranty gives you specific legal rights; however you may have other  
rights that vary from state to state.  
WHAT TO DO IF YOU NEED WARRANTY OR SERVICE  
Defective merchandise should be returned to your local Authorized Stillwater Designs (Kicker) Dealer for warranty  
Designs directly. You can confirm that a dealer is authorized by asking to see a current authorized dealer window  
decal.  
X
If it becomes necessary for you to return defective merchandise directly to Stillwater Designs (Kicker), call the Kicker  
Customer Service Department at (405) 624-8510 for a Return Merchandise Authorization (RMA) number. Package  
only the defective items in a package that will prevent shipping damage, and return to:  
Stillwater Designs, 5021 North Perkins Road, Stillwater, OK 74075  
The RMA number must be clearly marked on the outside of the package. Please return only defective components  
(most likely the SPAIR). The return of functioning items increases your return freight charges. Non-defective items  
will be returned freight-collect to you. For example, if a subwoofer is defective, only return the defective subwoofer,  
not the entire enclosure.  
Include a copy of the original receipt with the purchase date clearly visible, and a "proof-of-purchase" statement  
listing the Customer's name, Dealer's name and invoice number, and product purchased. Warranty expiration on  
items without proof-of-purchase will be determined from the type of sale and manufacturing date code. Freight must  
be prepaid; items sent freight-collect, or COD, will be refused.  
SOLOXSUBWOOFER  
WHAT IS NOT COVERED?  
This warranty is valid only if the product is used for the purpose for which it was designed.  
It does not cover:  
o Burnt voice coils  
o Damage due to improper installation  
o Subsequent damage to other components  
S12X, S10X  
o Damage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV radiation  
o Damage through negligence, misuse, accident or abuse. Repeated returns for the same damage may be  
considered abuse  
o Any cost or expense related to the removal or reinstallation of product  
o Speakers damaged due to amplifier clipping or distortion  
o Items previously repaired or modified by any unauthorized repair facility  
o Return shipping on non-defective items  
o Products with tampered or missing barcode labels  
o Products returned without a Return Merchandise Authorization (RMA) number  
o Freight Damage  
o The cost of shipping product to Kicker  
o Service performed by anyone other than Kicker  
HOW LONG WILL IT TAKE?  
Kicker strives to maintain a goal of 24-hour service for all acoustics (subwoofers, midrange drivers, tweeters,  
crossovers, etc) returns. Delays may be incurred if lack of replacement inventory or parts is encountered.  
Failure to follow these steps may void your warranty. Any questions can be directed to the Kicker Customer Service  
Department at (405) 624-8510. Contact your International Kicker dealer or distributor concerning specific  
proceduresforyourcountry'swarranty policies.  
© 2007 Stillwater Designs  
 
If you prefer an ultra-smooth bass response, you should loosely fill your SoloX enclosure with  
poly-fil stuffing. Ported designs will require covering the end of the port (located inside the box) with grill  
cloth, chicken wire, or expanded metal to prevent the poly-fil from exiting the port. The use of poly-fil  
will slightly decrease efficiency, but will deepen and extend the low frequency output.  
VentedEnclosureApplications  
The SoloX was designed for a vented enclosure. Throw out every experience you have ever had with a  
vented speaker and prepare to be blown away! Our engineers have designed boxes that will intimidate  
and irritate everyone within a 3 mile radius. These enclosures incorporate massive slot-loaded  
(rectangular) ports with ultra low air velocity for ground pounding street bass that will make your “skin  
bounce on your bones!”  
For more advice on box building, refer to your Authorized Kicker Dealer, or click on the Support tab on  
the Kicker homepage, www.kicker.com. Choose the Technical Manuals link and then download or view  
the corresponding information. Please E-mail [email protected] or call Technical Services  
(405) 624-8583 for specific or unanswered questions.  
These boxes are the enclosure of choice for outrageous street bass and high performance SPL  
contests. If space is not a problem and you want to get the most from your SoloX, try one of these  
ported designs. You will not be disappointed.  
Figure 5  
RemovalMountingAssembly  
The ported Compact design increases bass efficiency and fits in many space-limited applications.  
Although it is the smallest recommended ported enclosure, the output from 30 to 80 Hz will be  
considerably higher than that of any sealed box. The SUV design is the one to do if you have the room.  
Please follow these instruction to insure proper installation.  
With assistance, remove the SoloX from  
SoloX  
the cardboard box. See Figure 5.  
The SPL is the largest and most efficient enclosure design. The SPL delivers the sonic output needed to  
win SPL contests and it produces bass notes in a “Livin’ Loud” manner. This design is intended for test  
tones above 68Hz; playing music with frequencies below 68Hz will result in subwoofer damage.  
Acorn  
Head  
Bolts  
Then remove the eight (8) Acorn Head  
Box  
Bolts securing the SPAIR (Simple Pull  
Apart Insertable Replacement cone  
assembly) to the BAM (Basket And Motor  
assembly) and to the wood “template”.  
Model:  
S10X  
VentedCompact (MinimumEnclosureVolume)  
VentedSPL (MaximumEnclosureVolume)  
3
3
2.25 ft (63.7L) + port displacement, Fb=44Hz  
6 ft (170L) + port displacement, Fb=68Hz  
2
2
2
2
Port: 42 in (271cm ) area x 19.75” (50.2cm) long  
Port: 250 in (1613cm ) area x 9” (22.9cm) long  
Place the SPAIR in a safe and clean location. See Figure 6.  
Power Handling = 1400W Peak  
Power Handling = 2500W Peak above 68Hz  
Install  
Gap Cap  
3
3
S12X  
3 ft (85.0L) + port displacement, Fb=40Hz  
6 ft (170L) + port displacement, Fb=68Hz  
Figure 6  
2
2
2
2
Port: 45 in (290cm ) area x 18.75” (47.6cm) long  
Port: 250 in (1613cm ) area x 9” (22.9cm) long  
SPAIR  
Power Handling = 1400W Peak  
Power Handling = 2500W Peak above 68Hz  
Install the Gap Cap around the BAMs pole-piece to protect the  
motor assembly from debris during the installation. Metal  
shavings would be nearly impossible to remove from the gap.  
Please protect your purchase, use the Gap Cap. See Figure 7.  
BAM  
Model:  
S10X  
VentedSUV (TheOneToDo)  
3
4.91 ft (139L) + port displacement, Fb=45Hz  
Pro Tip: You are one ZX Mono-Amplifier  
and a few cables away from a slamm’in  
system! The Kicker ZX line of mono-  
amplifiers make it easy to upgrade to  
rock-solid bass.  
2
2
Port: 60 in (387cm ) area x 8.75” (22.2cm) long  
Remove  
Locator Hole  
Machine  
Screws  
10-24  
Power Handling = 1500W Peak  
(on the Back  
Side of the  
SPAIR)  
3
Locator Pin  
S12X  
6 ft (170L) + port displacement, Fb=45Hz  
Figure 7  
2
2
Please ask your dealer about the Kicker  
ZX Amplifier upgrades.  
Port: 60 in (387cm ) area x 6” (15.2cm) long  
With the Gap Cap installed, remove the four (4) 10-24 Phillips Head  
Machine Screws that lock the BAM to the wood “template”.  
See Figure 8.  
Power Handling = 2000W Peak  
BoxBuildingNotes  
Wood Template  
Use 3/4” (1.9cm) or thicker MDF (medium density fiberboard) and seal the joints with silicone. Use the  
wood “template” inside your SoloXs shipping carton to mark the mounting hole, then cut directly on the  
line. These designs need internal bracing. Add 4 x 4” (10x10cm) triangular bracing between each of the  
larger unsupported panels.  
BAM  
SPLAT  
SPLAT  
Figure 8  
The SPLAT (Speaker Precise Location  
Alignment Tool) and wood “template” will  
now come free from the BAM.  
See Figure 9.  
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the  
vented enclosures the displacement of the port must be calculated and added to the internal volume of  
the final design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for  
example the SoloX12 vented compact designs external port dimensions (45 in2 port area could be a  
15 x 3” port by 18.75” long) are, using 3/4” (1.9cm) MDF:  
[15” x (3” + 1.5” total MDF thickness) x 18.75”] x (1 ft3 / 1728 in3 ) = .732 ft3, and add this number to  
the internal volume of the enclosure, SoloX12s 3 ft3 + .732 ft3 = 3.732 ft3. See Figure 4. Due to the  
necessary length of these ports, you may want to fold the port along the bottom and back walls. It will  
be impractical to use round ports for these designs.  
Wood Template  
Place the wood “template” on the enclosure  
baffle and mark the holes for mounting  
hardware and for the woofer cutout.  
See Figure 10.  
Figure 9  
Do not install a port opening against a solid surface, such as an internal brace, back-panel or trunk wall,  
seat or interior panel of your vehicle. The port opening must remain unobstructed. Use the smallest  
dimension of the rectangular port as the minimum amount of space between the port opening and any  
solid surface to insure unrestricted airflow.  
Figure 10  
Enclosure Baffle  
SoloX Subwoofer and SPAIR - Covered by one or more of the following patents: U.S. Pat #'s 6,611,604, 6,731,773 D473,216, D456,386,  
D449,293, D355,193; Taiwan Pat. #162,154; Other U.S. and foreign patents pending.  
 
SOLOXSUBWOOFER  
4
5
Wood Template  
Figure 19  
RemovalMountingAssembly (Continued)  
Please follow these instruction to insure proper installation.  
Fit the SPAIR to the BAM with the  
10-24 Acorn Head Bolts. We have  
enclosed four (4) extra Acorn Head  
Bolts. See Figure 18.  
Use a jigsaw or router to cut the woofer cutout. Use a 5/16 or  
11/32” (8 - 8.8mm) drill bit for the mounting holes. See Figure 11.  
Note: The following steps require the assistance of  
another person.  
Hand tighten the 10-24 Acorn Head  
Bolts in the order shown in Figure 19.  
Then use a wrench or socket driver to  
securely fasten the bolts. This will  
ensure a proper fit and alignment.  
Figure 11  
Figure 12  
Enclosure Baffle  
SPLAT  
Figure 18  
Insert the SPLAT into the cutout (inside the enclosure) and move it into  
position. See Figure 12.  
A Note on PowerHandlingCapacity SoloX subwoofers will handle massive amounts of power in any of the  
recommended enclosures, minimum or maximum. The smaller enclosures are best for use in limited-space  
applications. The larger recommended enclosures will yield more bass at the resonate frequency of the enclosure.  
The listed Power Handling capacities assume that both voice coils are in use with the appropriate sub-sonic/resonate  
frequency filter. Always connect both coils in a dual voice-coil speaker.  
Enclosure Baffle  
Use masking tape to temporarily  
hold the SPLAT in place inside  
the enclosure. This will be  
necessary for securing the BAM.  
SPLAT  
Masking  
Tape  
Inside the  
Enclosure  
This tape can be removed after  
Enclosure  
Baffle  
Inside the  
Enclosure  
the corner fastening  
InternationalWarranty  
Contact your International Kicker dealer or distributor concerning specific procedures for your country's warranty  
policies.  
hardware has been installed.  
See Figure 13.  
Figure 13  
Enclosure Baffle  
BAM  
SPLAT  
WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing!  
Turning up a system to a level that has audible distortion is more damaging to your ears than listening to an  
undistorted system at the same volume level. The threshold of pain is always an indicator that the sound level is too  
loud and may permanently damage your hearing. Please use common sense when controlling volume.  
Machine  
Screws  
10-24  
With the help of an assistant, insert the BAM and start  
fastening the corner hardware. Remove the masking tape.  
Tighten the Phillips Head Machine Screws to secure the  
BAM to the enclosure  
baffle. See Figure 14.  
Figure 15  
GARANTÍA INTERNACIONAL  
VersiónEspañol  
SPAIR  
Connect  
Speaker  
Cable  
Comuníquese con su concesionario o distribuidor Kicker internacional para obtener infor ación sobre procedimientos  
específicos relacionados con las normas de garantía de su país.  
Enclosure  
Baffle  
Wires  
Figure 14  
ADVERTENCIA: Los excitadores Kicker son capaces de producir niveles de sonido que pueden dañar  
permanentemente el oído. Subir el volumen del sistema hasta un nivel que produzca distorsión es más dañino para el  
oído que escuchar un sistema sin distorsión al mismo volumen. El dolor es siempre una indicación de que el sonido es  
muy fuerte y que puede dañar permanentemente el oído. Sea precavido cuando controle el volumen.  
Pull the speaker cable wires (used to connect the subwoofer to the  
amplifier) through the BAM and connect them to the SPAIRs  
Binding Posts. The Locator Pin and Locator Hole will properly align  
INTERNATIONALE GARANTIE  
DeutscheVersion  
Nehmen Sie mit Ihren internationalen Kicker-Fachhändler oder Vertrieb Kontakt auf, um Details über die  
Garantieleistungen in Ihrem Land zu erfahren.  
the SPAIR to the BAM.  
Remove  
Gap Cap  
Locator Hole  
Locator Pin  
See Figure 15.  
BAM  
SPAIR  
WARNUNG: KICKER-Treiber können einen Schallpegel erzeugen, der zu permanenten Gehörschäden führen kann!  
Wenn Sie ein System auf einen Pegel stellen, der hörbare Verzerrungen erzeugt, schadet das Ihren Ohren mehr, als ein  
nicht verzerrtes System auf dem gleichen Lautstärkepegel. Die Schmerzschwelle ist immer eine Anzeige dafür, dass  
der Schallpegel zu laut ist und zu permanenten Gehörschäden führen kann. Seien Sie bei der Lautstärkeeinstellung  
bitte vernünftig!  
Enclosure  
Baffle  
Remove the Gap Cap before  
inserting the SPAIR.  
See Figure 16.  
Enclosure  
Baffle  
GARANTIE INTERNATIONALE  
VersionFrançaise  
SPAIR  
Pour connaître les procédures propres à la politique de garantie de votre pays, contactez votre revendeur ou  
distributeur International Kicker.  
Locator  
Hole  
AVERTISSEMENT: Les haut-parleurs Kicker ont la capacité de produire des niveaux sonores pouvant endommager  
l'ouïe de façon irréversible ! L'augmentation du volume d'un système jusqu'à un niveau présentant une distorsion  
audible endommage davantage l'ouïe que l'écoute d'un système sans distorsion au même volume. Le seuil de la  
douleur est toujours le signe que le niveau sonore est trop élevé et risque d'endommager l'ouïe de façon irréversible.  
Réglez le volume en faisant prevue de bon sens !  
Carefully insert the SPAIR back into  
the BAM; do not damage the voice  
BAM  
coil. The Locator Pin on the BAM and  
the Locator Hole in the SPAIR must  
line up. The ARCTIC (Aluminum Rapid  
Figure 16  
Enclosure  
Baffle  
Cooling Thermal Induction Centering)  
Cap, located on the top of the extended pole piece of the SPAIR, will  
help to center the SPAIR as you lower it into the BAM. When properly  
aligned these assemblies easily slide together. See Figure 17.  
Locator Pin  
BAM  
Figure 17  
P.O. Box 459 • Stillwater, Oklahoma 74076 • U.S.A. • (405) 624-8510  
03062007+07SOLOX  
 
SOLOXSUBWOOFER  
6
7

Insignia Network Card NS PU98505 User Manual
Jensen MP3 Docking Station JIMS 225 User Manual
Jensen Portable CD Player JCDWIN User Manual
JL Audio Car Speaker 10W3v3 2 User Manual
JVC Security Camera VN H257U User Manual
JVC Speaker System GVT0298 003B User Manual
Kawasaki Drill 840097 User Manual
Kettler Indoor Furnishings 2533 User Manual
Keys Fitness Home Gym KPS 1550 User Manual
KitchenAid Dishwasher KUDH03DTSS0 User Manual