7
USER MANUAL
ThANk yoU
thank you for purchasing the Jabra bt2070 bluetooth® headset.
We hope you enjoy it! this instruction manual will get you started
and ready to make the most of your headset.
AboUT yoUR JAbRA bT2070
1
2
3
4
5
Answer/end button,
LED light
On/off button
Charger socket
Volume up/volume down
Ear hook
3
4
1
2
5
Jabra bt2070
2
WhAT yoUR hEAdSET doES
Your Jabra BT2070 lets you do all this:
•
•
•
•
•
•
•
Answer calls
End calls
Reject calls*
Voice dialing*
Last number redialing*
Call waiting*
Put call on hold*
Specifications
•
•
Talk time up to 4 hours/standby time up to 180 hours
Rechargeable battery with charging option from AC power
supply, PC via usb cable or car charger (not included)
•
•
•
•
•
White colored light for status and battery indicator
Quiet mode – turns light off after 1 minute
Size: L 41,5mm x 18,9mm x H25,9mm
Weight 8 grams
Qualified for Bluetooth Specification version 2.0 + EDR
(enhanced data rate), supporting headset and hands-free
Profiles for phone conversations.
•
•
•
e-SCO for enhanced audio quality
128 bit encryption
Operating range up to 10 meters (approx. 33 feet)
* Phone dependent
Jabra bt2070
3
gETTiNg STARTEd
you should follow three steps before using your headset
1. Charge your headset
2. Activate Bluetooth on your mobile phone (refer to the
manual for your Mobile phone)
3. Pair your headset to your mobile phone
The Jabra BT2070 is easy to operate. The answer/end button on
the headset performs different functions depending on how long
you press it.
Instruction
tap
Duration of press
Press briefly (Approx. 1 second)
2 quickly repeated taps
Approx: 1-3 seconds
double tap
Press
Press and hold
Approx: More than 5 seconds
ChARgE yoUR hEAdSET
make sure that your Jabra bt2070 headset is fully charged before
you start using it. use the aC adaptor to charge from a power
socket. Your headset indicates the charging level while charging:
What you see
solid light
Charge level
Is charging
no light
Charging done
low battery
4 flashes
(repeated every 5 sec)
Jabra bt2070
4
make sure that your headset is fully charged for two hours before
you start using it. use the aC power supply to charge from a
power socket. When the light indicator (led) has a solid led light,
your headset is charging. When the solid LED light turns off, it is
fully charged.
Use only the charger provided in the box - do not user chargers
from any other devices as this may damage your headset.
Please note: The lifetime of the battery will be significantly
reduced if your device is left uncharged for a long period. We
therefore recommend that you recharge your device at least
once a month.
TURNiNg yoUR hEAdSET oN ANd off
•
Press on/off button for approx. 2 seconds to turn the headset
on or off.
PAiRiNg iT WiTh yoUR PhoNE
headsets are connected to phones using a procedure called
‘pairing’. by following a few simple steps, a phone can be paired
with a headset in a matter of minutes.
1. Put the headset in pairing mode
•
When you turn on your Jabra BT2070 for the first time, the
headset will automatically start up in pairing mode – i.e. it is
discoverable for your phone. When the headset is in pairing
mode the led is constantly lit.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT2070
•
Follow your phone’s instruction guide. First make sure that
bluetooth is activated on your mobile phone. then set your
phone to discover the headset. this usually involves going
to a‘setup,’‘connect’or‘bluetooth’menu on your phone and
selecting the option to‘discover’or‘add’a Bluetooth device.*
Jabra bt2070
5
3. Your phone will find the Jabra BT2070
•
Your phone will find the headset under name“Jabra BT2070”.
your phone then asks if you want to pair with the headset.
Accept by pressing‘Yes’or‘OK’on the phone and confirm with
the passkey or PIN = 0000 (4 zeros). Your phone will confirm
when pairing is complete.
JABRA BT2070
BT2070
JABRA BT2070
In case of unsuccessful pairing, put the Jabra bt2070 into pairing
mode manually. Make sure the headset is off. Press and hold the
on/off button for approximately 5 seconds until the LED has a
constant light.The LED will flash before the light is constant –
keep holding down the button until light is constant.
WEARiNg STyLE
the Jabra bt2070 is ready to wear. It comes with 2 ear hooks in
different sizes – a small one and a bigger one. Both are ready
to clip on. Wear the headset with ear hook or without. It is your
choice.
for optimal performance, wear the Jabra bt2070 and your mobile
phone on the same side of your body or within line of sight.
In general, you will get better performance when there are no
obstructions between your headset and your mobile phone.
hoW To
Answer a call
•
Tap the answer/end button on your headset to answer a call.
End a call
Tap the answer/end button to end an active call.
•
Jabra bt2070
6
Make a call
•
When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset. If your phone does not allow this feature, tap on the
Jabra BT2070’s answer/end button to transfer the call to the
headset.
Reject a call *
•
Press the answer/end button when the phone rings to reject an
incoming call. depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
you will hear a busy signal.
Activate voice dialing*
•
Press the answer/end button. For best results, record the voice-
dialling tag through your headset. Please consult your phone’s
user manual for more information about using this feature.
Redial last number *
•
Double Tap the answer/end button when the headset is on and
not used.
Adjust sound and volume *
Tap the volume up or down to adjust the volume.
Mute/unmute
•
•
To mute, press both volume up and down at the same time.
a low beep alert plays during a muted call.
•
To un-mute, tap either of the volume buttons.
Call waiting and placing a call on hold*
this lets you put a call on hold during a conversation and answer
a waiting call.
•
Press the answer/end button once to put the active call on hold
and answer the waiting call.
•
•
Press the answer/end button to switch between the two calls.
Tap the answer/end button to end the active conversation.
* Phone dependent
Jabra bt2070
7
WhAT ThE LighTS MEAN
What you see
solid light
Call/connection status
In pairing mode
slow single flash
slow triple flash
Quick double flash
Connected to phone
not connected to phone
Incoming or outgoing call in
headset
4 flashes
low battery
(repeated every 5 sec)
TRoUbLEShooTiNg & fAQ
I hear crackling noises
•
Bluetooth is a radio technology, which means it is sensitive to
objects between the headset and the connected device. It is
designed for the headset and the connected device to be used
within 33 feet (10 meters) of each other, with no major objects
in the way (walls, etc.).
I cannot hear anything in my headset
•
•
•
Increase the volume in the headset
Ensure that the headset is paired to a device that is playing
Make sure your phone is connected to the headset by tapping
the Answer/End button.
I am having pairing problems
•
You may have deleted your headset pairing connection in your
mobile phone. follow the pairing instructions.
I want to reset the headset
•
It is possible to reset and test the headset. Make sure that the
headset is powered off. Press and hold the answer/end button
and the on/off button at the same time for 10 seconds.
The headset will automatically turn off after approx. 10 seconds.
The next time you power on, the headset will go into pairing
mode as the first time you powered your new BT2070 on.
Jabra bt2070
8
Will the Jabra BT2070 work with other Bluetooth equipment?
•
The Jabra BT2070 is designed to work with Bluetooth mobile
phones. It can also work with other bluetooth devices that are
compliant with bluetooth version 1.1 or higher and support a
headset, hands-free and/or advance audio distribution profile.
I cannot use Reject call, call on hold, Redial or voice dialling
•
These features are dependent on the ability of your phone to
support a hands-free profile. Even if the handsfree profile is
implemented reject call, call hold and voice dialing are optional
features which are not supported by all devices. Please consult
your device manual for details.
The device is not connected to my headset in time to answer
an incoming call
•
If the headset is off and is turned on when a call is incoming,
the device and headset might not connect in time for the call
to be answered. In order to avoid such inconveniences please
keep the headset on, in range and connected.
NEEd MoRE hELP?
1. Web:
(for the latest support info and online user manuals)
2. E-mail:
3. Phone:
support.uk@jabra.com
Information: [email protected]
0800 0327026
TAkiNg CARE of yoUR hEAdSET
•
•
Always store the Jabra BT2070 with the power off and safely
protected
Avoid storage at extreme temperatures (above 45°C/113°F
– including direct sunlight – or below -10°C/14°F). This
can shorten battery life and may affect operation. High
temperatures may also degrade performance.
•
Do not expose the Jabra BT2070 to rain or other liquids.
Jabra bt2070
9
WARNiNg!
headsets are capable of delivering sounds at loud volumes
and high pitched tones. Exposure to such sounds can result
in permanent hearing loss damage. the volume level may
vary based on conditions such as the phone you are using, its
reception and volume settings, and the environment. Please read
the safety guidelines below prior to using this headset.
Safety guidelines
1. Prior to using this product follow these steps
•
Before putting on the headset, turn the volume control to its
lowest level,
•
•
Put the headset on, and then
Slowly adjust the volume control to a comfortable level.
2. During the use of this product
•
Keep the volume at the lowest level possible and avoid using
the headset in noisy environments where you may be inclined
to turn up the volume;
•
If increased volume is necessary, adjust the volume control
slowly;
and
•
If you experience discomfort or ringing in your ears,
immediately discontinue using the headset and consult a
physician.
With continued use at high volume, your ears may become
accustomed to the sound level, which may result in permanent
damage to your hearing without any noticeable discomfort.
using the headset while operating a motor vehicle, motorcycle,
watercraft or bicycle may be dangerous, and is illegal in some
jurisdictions. Check your local laws. use caution while using your
headset when you are engaging in any activity that requires your
full attention. While engaging in any such activity, removing the
headset from your ear area or turning off your headset will keep
you from being distracted, so as to avoid accident or injury.
Jabra bt2070
10
3. Keep out of reach of children:
the plastic bags the product and its parts are wrapped in are
not toys for children. the bags themselves or the many small
parts they contain may cause choking if ingested. never try to
dismantle the product yourself. none of the internal components
can be replaced or repaired by users.
only authorised dealers or service centres may open the product.
If any parts of your product require replacement for any reason,
including normal wear and tear or breakage, contact your dealer.
4. ACA TS028 – Ignition of flammable atmospheres
do not use the headset in environments where there is a danger
of ignition of flammable gases.
WARRANTy
Limited Two (2) -Year Warranty
GN Netcom A/S, warrants this product to be free from defects in
materials and workmanship (subject to the terms set forth below)
for a period of two (2) year from the date of purchase (“Warranty
Period”). During the Warranty Period, GN Netcom A/S will repair
or replace (at GN Netcom A/S’s discretion) this product or any
defective parts (“Warranty Service”). If repair or replacement is not
commercially practicable or cannot be timely made, Gn netcom
A/S may choose to refund to you the purchase price paid for the
affected product. Repair or replacement under the terms of this
warranty does not give right to any extension or a new beginning
of the period of warranty.
Claims under the Warranty
To obtain Warranty Service, please contact the GN Netcom A/S
com for further information about customer support. you will
need to return this Product to the dealer or ship it to the dealer
its original packaging or packaging affording an equal degree of
protection. you will bear the cost of shipping the product to Gn
Netcom A/S. If the Product is covered by the warranty, GN Netcom
A/S will bear the cost of shipping product back to you after the
completion of service under this warranty. return shipping will
be charged to you for products not covered by the warranty or
requiring no warranty repair.
Jabra bt2070
11
the following information must be presented to obtain Warranty
Service: (a) the product, and (b) proof of purchase, which clearly
indicates the name and address of the seller, the date of purchase
and the product type, which is evidence that this product is within
the Warranty Period. Please further include (c) your return address.
(d) daytime telephone number, and (e) reason for return. as part
of GN Netcom A/S/Jabra’s efforts to reduce environmental waste
you understand that the product may consist of reconditioned
equipment that contains used components, some of which have
been reworked. the used components all live up to Gn netcom
A/S/Jabra’s high quality standards and comply with the GN
Netcom A/S product performance and reliability specifications.
you understand that replaced parts or components will become
the property of GN Netcom A/S.
Limitation of Warranty
this warranty is only valid for the original purchaser and will
automatically terminate prior to expiration if this product is sold
or otherwise transferred to another party. the warranty provided
by GN Netcom A/S in this statement applies only to products
purchased for use, and not for resale. It does not apply to open
box purchases, which are sold“as is”and without any warranty.
Specifically exempt from warranty are limited-life consumable
components subject to normal wear and tear, such as microphone
windscreens, ear cushions, modular plugs, ear tips, decorative
finishes, batteries, and other accessories. This warranty is invalid
if the factory-applied serial number, date code label, or product
label has been altered or removed from this product. this
Warranty does not cover cosmetic damage or damage due to
misuse, abuse, negligence, acts of nature, accident, disassembling
or modification of, or to any part of, the product. This Warranty
does not cover damage due to improper operation, maintenance
or installation, or attempted repair by anyone other than Gn
Netcom A/S or a GN Netcom A/S dealer which is authorized to do
GN Netcom A/S warranty work. Any unauthorized repairs will void
this warranty.
Jabra bt2070
12
rePaIrs or rePlaCements as ProvIded under thIs
Warranty are the eXClusIve remedy of the Consumer.
GN Netcom A/S SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
ConseQuentIal damaGes for breaCh of any eXPress or
ImPlIed Warranty on thIs ProduCt. eXCePt to the eXtent
ProhIbIted by laW, thIs Warranty Is eXClusIve and In
lIeu of all other eXPress and ImPlIed WarrantIes What
so ever, InCludInG but not lImIted to the Warranty of
merChantabIlIty and fItness for a PraCtICal PurPose.
NOTE! This warranty gives you specific legal rights. You may
have other rights which vary from location to location. some
jurisdictions do not allow the exclusion or limitation of incidental
or consequential damages or implied warranties, so the above
exclusions may not apply to you. This warranty does not affect your
legal (statutory) rights under your applicable national or local laws.
CERTifiCATioN ANd SAfETy APPRovALS
CE
this product is Ce marked according to the provisions of the r
& TTE Directive (99/5/EC). Hereby, GN Netcom A/S, declares that
this product is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
Within the eu this device is intended to be used in austria,
Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia,
finland, france, Germany, Greece, hungary, Ireland, Italy, latvia,
Lithuania, Luxembourg, Malta, Poland, Portugal, Romania,
slovakia, slovenia, spain, sweden, the netherlands, united
Kingdom, and within EFTA in Iceland, Norway and Switzerland.
Bluetooth
the bluetooth® word mark and logos are owned by the bluetooth
SIG, Inc. and any use of such marks by GN Netcom A/S is under
license. other trademarks and trade names are those of their
respective owners.
Jabra bt2070
13
gLoSSARy
1. Bluetooth is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords over
a short distance (approx. 10 meters/33 feet). Bluetooth is
safe to use. It is secure too, so once a connection has been
made no-one can listen in and there is no interference from
other bluetooth devices either. Get more information at
www.bluetooth.com.
2. Bluetooth profiles are the different ways that Bluetooth
devices communicate with other devices. bluetooth phones
support the headset profile, the hands-free profile or both.
In order to support a certain profile, a phone manufacturer
must implement certain mandatory features within the
phone’s software.
3. Pairing creates a unique and encrypted link between two
bluetooth devices and lets them communicate with each other.
bluetooth devices will not work if the devices have not been
paired.
4. Passkey or PIN is a code that you enter on your bluetooth
enabled device (e.g. a mobile phone) to pair it with your
Jabra bt2070. this makes your device and the Jabra bt2070
recognize each other and automatically work together.
5. Standby mode is when the Jabra bt2070 is passively waiting
for a call. When you‘end’a call on your mobile phone, the
headset goes into standby mode.
dispose of the product according
to local standards and regulations.
Jabra bt2070
14
© 2008 GN Netcom A/S. All rights reserved. Jabra® is a registered
trademark of GN Netcom A/S. All other trademarks included
herein are the property of their respective owners. the bluetooth®
word mark and logos are owned by the bluetooth sIG, Inc.
and any use of such marks by GN Netcom A/S is under license.
(Design and specifications subject to change without notice).
made In ChIna
TYPE: BT2070
|