thank you
Thank you for purchasing the Jabra HaLO2 bluetooth® headset
We hope you enjoy it! This instruction manual will get you started
and ready to make the most of your headset
about your Jabra haLo2
1
2
3
4
5
Answer/End or Play/Pause button
Volume Control or Track Change touch sensor
Hinges for folding of headset
Battery indicator
Bluetooth connectivity indicator
3
3
4
5
L
2
1
Jabra HaLO2
2
What your headset does
The Jabra HaLO2 lets you listen to stereo music through your
bluetooth enabled mobile phone or music player, while ensuring
that you never miss a call
-
-
-
-
-
Play your music wirelessly
answer or end phone calls
reject incoming calls
Last number redialing
multiuse™ – be connected to two bluetooth devices at the
same time (for instance your PC and mobile)
-
use 3 5mm music cable for wired music listening from e g your
mp3 player or PC
Specifications
music:
-
-
-
music time up to 8 hours, standby time up to 13 days
Track changes (next or previous track) on touch control (avrCP)
a2dP (advanced audio distribution Profile) for streaming music
Call:
-
-
-
-
-
-
-
-
Talk time up to 8 hours
dual microphone solution for Noise Blackout™
digital sound enhancement via dsP technology
noise reduction on transmitted and received audio
noise dependent volume control*
automatic volume adjustment on received audio
acoustic shock protection
Qualified for bluetooth specification version 3 0, supporting
Headset and Hands-free Profiles for phone conversations and
advanced audio distribution Profile (a2dP) for streaming
music
-
-
e-sCO for enhanced audio quality
128-bit encryption
Jabra HaLO2
3
* refer to phone’s user manual
The device:
-
rechargeable battery with micro-usb charging option from aC
power supply, PC via usb cable or car charger (not included)
Colored Led-lights for bluetooth status and battery indicator
size unfolded: H 165mm - 190mm x W 136mm x d 45mm
size folded: H 78mm x W 132mm x d 45mm
-
-
-
-
-
Weight: 80 grams
Operating range up to 10 meters (approximately 33 feet)
Please note that your Jabra HALO2 can withstand a short rain shower
but is not waterproof and cannot be submerged. If your device gets
wet, it should be wiped clean of any traces of water in order to protect
it from potential damage.
GettInG started
follow these three steps before using your headset:
1. Charge your headset (approximately 2 hours)
2. Activate Bluetooth on your mobile phone (refer to the
manual for your mobile phone)
3. Pair your headset to your mobile phone
CharGInG your Jabra haLo2
make sure that your Jabra HaLO2 is fully charged before you start
using it for the first time While charging, the battery indicator
changes from red to green, when fully charged Charging time is
approximately 2h you can use the Jabra HaLO2 during recharge
Please note: The lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period. Jabra therefore
recommends that you recharge your device at least once a month.
Jabra HaLO2
4
turnInG your Jabra haLo2 on and off
unfolding the headset will turn it on
folding the headset will turn it off
-
To fold: Carefully extend the headset at the hinges (3) and fold
The headset will now conveniently fold into a compact size
-
To unfold: Carefully unfold the headset and lock the hinges into
place
The headset will automatically turn off after 10 minutes if not
connected to a device
PaIrInG your Jabra haLo2 to a Phone or
other devICe
Headsets are connected to phones or other bluetooth devices
using a procedure called‘pairing’ by following a few simple steps,
pairing can be done in a matter of seconds
1. Put the headset in pairing mode
1 a first time pairing
-
fold and unfold the headset and the Jabra HaLO2 will
automatically enter pairing mode (indicator light (5) is solid
blue) and start searching for a device
1 b Later pairing
-
Press and hold the answer/end button (1) until the indicator
light (5) is solid blue (approximately 4 seconds)
2. Set your Bluetooth phone or device to search for the
Jabra HALO2
-
follow your phone’s instruction guide first make sure that
bluetooth is activated on your mobile phone Then set your
phone to search for the headset This usually involves going
to a‘setup,’‘ connect’or‘bluetooth’menu on your phone and
selecting the option to search for or‘add’a bluetooth device *
3. Your phone will find the Jabra HALO2
-
-
-
The phone will find the headset under name“Jabra HaLO2”
your phone then asks if you want to pair with the headset
accept by pressing ‘yes’or‘Ok’on the phone and confirm with
the passkey or PIn = 0000 (4 zeros) your phone will confirm
when pairing is complete
Jabra HaLO2
5
* refer to phone’s user manual
WearInG styLe
Please note the left/right wearing indicators inside the headband
alternatively always wear the Jabra HaLO2 with the answer/end
button on you right
adapt the size of your Jabra HaLO2 by extending the length of the
headband by the speakers
hoW to
The Jabra HaLO2 is easy to operate The answer/end button
performs different functions depending on how long you press
them:
Instruction
Tap
Duration of press
Press briefly
double tap
Touch briefly two times
within 0,5 seconds
Press
approximately: 1 second
approximately: 4 seconds
Press and hold
Play music (Some phones may require you to start a media
player first)*
-
Tap the answer/end button (1)
Pause music
Tap the answer/end button – tap again to resume playing
Answer a call when playing music
-
-
When listening to music and receiving a call, the music will
pause and you will hear your ringtone
-
Tap the answer/end button and the music will be paused and
the call will be connected
End a call
Tap the answer/end button to end an active call - when you
end the call, your music will start again**
-
Jabra HaLO2
6
* refer to phone’s user manual
** device dependent
Skip one track forward
double Tap on the
tapping to skip several tracks forward
Skip one track back
double Tap on the
tapping to skip several tracks backward
Answer a call
Tap the answer/end button (1) to answer a call
End a call
-
+
end of the touch control (2) - continue
-
–
end of the touch control (2) - continue
-
-
Tap the answer/end button (1) to end an active call
Reject a call**
-
Press and hold the answer/end button when the phone rings
to reject an incoming call depending on your phone settings,
the person who called you will either be forwarded to voice
mail or hear the busy signal
Make a call**
-
When your Jabra HaLO2 is connected to your phone, all calls
made from your phone will automatically be transferred to
your headset (subject to phone settings)
Redial last number**
double tap the answer/end button
Adjust sound and volume*
-
-
Touch and slide your finger along the touch control (2) to turn
volume up or down
Mute microphone when on a phone call
double Tap on
or on the touch control (2) Tap the touch
control to un-mute
-
–
+
Using your Jabra HALO2 with the 3.5mm music cable (not
Bluetooth)
-
Insert the 3 5mm music cable into the micro-usb socket and
connect the 3 5mm jack to the device
-
using your Jabra HaLO2 with the 3 5mm music cable is not
possible if the battery is completely discharged, so make sure
that it is at least partly charged
Jabra HaLO2
7
* refer to phone’s user manual
** device dependent
What the dIsPLay means
On the right inside of Jabra HaLO2 two display icons indicate
different states of the product:
bluetooth Icon (only blue)
solid
In pairing mode – see“Pair
Jabra HaLO2 to a phone or
other device”
slow single flash
single flash
Connected to phone and in
standby mode(A)
Connected to phone and
active on call(A)
Quick double flash
Three slow flashes
Incoming call
not connected to phone and
standby mode(A)
solid (+ battery Indicator
solid Orange)
In alternative pairing mode –
see“Troubleshooting & faQ”
battery Indicator Icon:
solid red
Charging
solid Green
fully charged
Low battery
single red flash
solid Orange (+ bluetooth
Icon solid blue)
In special Pairing mode – see
“Troubleshooting & faQ”
(A)Jabra HaLO2 display icons turn off after 30 seconds of non-
activity Headset is still active, and light will flash again after a tap
on the answer/end button or any call activity
Communication by sound alerts
your Jabra HaLO2 employs sound alerts to communicate diffe-
rent actions or information One important alert is“Low battery”,
which is two short beeps, and indicates 5 minutes of battery time
remains
Jabra HaLO2
8
usInG your Jabra haLo2 WIth tWo mobILe
devICes
The Jabra HaLO2 is capable of having two mobile phones (or
bluetooth devices) connected to the headset at the same time
This will give you the freedom of having only one headset to
operate both of your mobile phones Please note that Last
number redial will dial the number from the last outgoing call,
independent of the mobile phone
If the headset is connected to two phones please note that Play /
Pause and next / Previous track will be sent to the phone that was
the last connected phone (Last connected avrC profile)
troubLeshootInG & faQ
I hear crackling noises
-
bluetooth is a radio technology which means it is sensitive to
objects between the headset and the device it is connected
to you should be able to have up to 10 meters (33 feet) of
distance between the headset and the connected device when
there are no major objects in the way (walls, etc )
I cannot hear the phone call in the headset
-
-
Increase the volume on the Jabra HaLO2
make sure your phone is connected to the headset by i e tapping
the answer/end button, or viewing the bluetooth icon in the
display
I have pairing problems
-
you may have deleted the pairing connection in your mobile
phone – follow the pairing instructions in‘Pair your Headset to
a Phone or other device‘
I cannot use Reject call, Call on hold or Redial
-
These features are dependent on your phone supporting them;
please consult your phone’s manual for details
Jabra HaLO2
9
I cannot hear music in the headset
-
ensure that the headset is connected to your bluetooth
enabled device
-
you may have been out-of-range (10 meters) to your bluetooth
enabled device or the headset might have experienced an esd
(electrostatic discharge) incidence Press the multi function
button to re-establish the bluetooth audio link
-
-
Increase the volume on your device
make sure that the Jabra HaLO2 is charged
The music I hear sounds very poor
make sure the other device supports bluetooth 1 1 or higher
including the advanced audio distribution Profile (a2dP) for
music streaming
If the above procedure did not help then it is possible that your
phone is using the stereo audio connection in a different way you
can enable this mode on Jabra HaLO2 by performing pairing in
the following way:
-
remove the bluetooth connection to Jabra HaLO2 on your
phone
-
-
make sure the headset is on (un-folded)
Press and hold the answer / end button for more than 5 seconds
until the both display icons are solid blue and solid Orange
-
Go through the regular steps in pairing the headset to
a bluetooth device
be aware that standby time of the Jabra HaLO2 can be lower
when using this pairing
takInG Care of your headset
-
always store the Jabra HaLO2 with the power off and safely
protected
-
avoid storage at extreme temperatures (above 45°C/113°f –
including direct sunlight – or below -10°C/14°f) This can shorten
battery life and may affect operation High temperatures may
also degrade performance
-
do not expose the Jabra HaLO2 to rain or other liquids
Jabra HaLO2
10
GLossary
1. Bluetooth is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords over
a short distance (approx 10 meters/33 feet) bluetooth is safe
to use It is secure too, so once a connection has been made
no-one can listen in and there is no interference from other
bluetooth devices either Get more information at
www bluetooth com
2. Bluetooth profiles are the different ways that bluetooth
devices communicate with other devices bluetooth phones
support the headset profile, the hands-free profile or both In
order to support a certain profile, a phone manufacturer must
implement certain mandatory features within the phone’s
software
3. Pairing creates a unique and encrypted link between two
bluetooth devices and lets them communicate with each other
bluetooth devices will not work if the devices have not been
paired
4. Passkey or PIN is a code that you enter on your bluetooth
enabled device (e g a mobile phone) to pair it with your Jabra
HaLO2 This makes your device and the Jabra HaLO2 recognize
each other and automatically work together
5. Standby mode is when the Jabra HaLO2 is passively waiting
for a call When you‘end’a call on your mobile phone, the
headset goes into standby mode
dispose of the product according
to local standards and regulations
www jabra com/weee
Jabra HaLO2
11
© 2011 Gn netcom US, inc. All rights reserved. Jabra® is a registered
trademark of Gn netcom A/S. All other trademarks included herein
are the property of their respective owners. The Bluetooth® word
mark and logos are owned by the Bluetooth SiG, inc. and any use
of such marks by Gn netcom A/S is under license. (design and
specifications subject to change without notice).
© 2011 Gn netcom A/S. All rights reserved. Jabra® is a registered
trademark of Gn netcom A/S. All other trademarks included herein
are the property of their respective owners. The Bluetooth® word
mark and logos are owned by the Bluetooth SiG, inc. and any use
of such marks by Gn netcom A/S is under license. (design and
specifications subject to change without notice).
MAde in CHinA
MOdeL: OTe10
|