JVC CRT Television GGT0079 001A H User Manual

COLOR TELEVISION  
Contents  
Knowing your TV’s features  
AV-14FN15  
AV-20NN15  
..........................  
2
.
Remote control buttons and basic functions 3  
..............................  
TV buttons and functions  
5
6
........................................  
Setting up your TV  
.................................  
Basic setting for picture  
8
.........................  
...........................  
..........................  
Advanced setting for picture  
Original features for picture  
Advanced setting for sound  
Favorite channel and video setting  
9
9
9
.............  
10  
11  
12  
13  
13  
14  
.....................................  
Customized setting  
TV channel presetting  
Additional preparation  
.................................  
.................................  
..........................................  
Troubleshooting  
..............................................  
Specifications  
INSTRUCTIONS  
GGT0079-001A-H  
 
Remote control buttons and basic functions  
1
6
9
0
-
8
2
3
7
4
5
RM-C1265  
No.Press  
To  
Turn on or off the TV from standby mode.  
Display menu and confirm selected function.  
Select and adjust menu function.  
Select the desired channel number.  
Adjust the volume level.  
Select TV or VIDEO terminal input.  
Turn off the volume. Press this button again to resume the volume.  
Display the program number or video terminal number on the screen.  
1
2
3
4
5
6
7
8
POWER  
MENU/OK  
5//2/3  
CHANNEL M  
VOLUME M  
TV/VIDEO  
MUTING  
DISPLAY/BACK  
On the other hand, you can use this button to return to the previous menu.  
Display information in text which are broadcasted by some TV channels.  
Select the program number. For three-digit program numbers, press 100+,  
then press the number button.  
9
0
CLOSED CAPTION  
0-9, 100+  
-
RETURN,  
a) Return to the frequently viewed channels with one touch.  
1
2
Choose the channel you want to register.  
Press and hold RETURN, button until “RETURN PLUS PROGRAMMED!”  
appears.  
To cancel, press and hold RETURN, button until “RETURN PLUS CANCELED!”  
appears.  
b) Return to the previously viewed channel, if you have not set or have  
canceled the Return channel as above.  
3
 
Remote control buttons and basic functions  
How to operate menus and menu locations  
TO  
Operation  
Note  
Display the MENU.  
Press the MENU/OK button 2.  
To exit the MENU, press the  
DISPLAY/BACK button* 8 or  
choose EXIT menu.  
Display the top menu. Press 5/buttons 3 to choose a menu title. Press button 3 to display the  
Then press MENU/OK button 2.  
Display the 2nd menu. Press 5/buttons 3 to choose a menu title.  
Then press MENU/OK button 2.  
next page for more functions.  
Display the 3rd menu. Press 5/buttons 3 to choose a menu title.  
Then press MENU/OK button 2.  
Return to the previous Press the DISPLAY/BACK button* 8.  
menu.  
Choose the setting of Press 5/buttons 3 to choose a function.  
Press the MENU/OK button 2 to  
a function.  
Then press the 2/3 buttons 3 to change the exit from the menu.  
setting.  
Adjust the effect level Press 5/buttons 3 to choose a function.  
of a function.  
Then press the 2/3 buttons 3 to adjust the  
effect level.  
Display the sub menu Press 5/buttons 3 to choose a function.  
of a function.  
Then press MENU/OK button 2 to display  
the sub menu.  
The following chart shows locations of functions in menus.  
In this manual, location of a function is described as follows:  
MENU  
Top menu  
2nd menu  
MENU  
Top menu  
2nd menu  
3rd menu  
Note: Some functions have the 4th menus as the sub-menus.  
*To exit the menu, the on screen display will show BACK indicated in blue. But it doesn’t refer to the  
blue button on the remote control. Instead, it refers to the DISPLAY/BACK button on the remote  
control.  
Top menu  
2nd menu  
Location 3rd menu  
Location  
MENU  
INPUT  
EXT. INPUT  
P.11  
P.11  
P.9  
P.8  
P.8  
P.8  
-
-
-
DISPLAY  
-
-
CLOSED CAPTION  
PICTURE MODE  
PICTURE SETTING  
WHITE BALANCE  
PICTURE FEATURES  
-
-
PICTURE  
* If you want to  
adjust  
PICTURE  
SETTING  
-
-
-
-
-
-
VNR  
P.11  
menu, you must  
set PICTURE  
MODE menu to  
USER.  
FAVORITE CH SETTING  
P.10  
VIDEO SETTING  
P.10  
COLOR SYSTEM  
P.8  
SOUND  
AI VOLUME  
OFF TIMER  
P.9  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
FEATURES  
P.11  
P.11  
P.12  
P.12  
P.9  
CHILD LOCK  
AUTO PROGRAM  
CHANNEL SUMMARY  
BLUE BACK  
INSTALL  
EXIT  
AUTO SHUTOFF  
-
P.11  
-
4
 
TV buttons and functions  
The following illustrations are for AV-14FN15 and AV-20NN15 only, which are used for  
explanation purposes. Your TV may not look exactly like the illustration.  
Front of the TV  
9
9
8
7
6
6
5
5
4
3 2 1  
AV-14FN15  
AV-20NN15  
MENU  
OK  
VIDEO AUDIO  
IN (VIDEO-2)  
8
7
4
3 2 1  
MENU  
OK  
VIDEO AUDIO  
IN (VIDEO-2)  
Rear of the TV  
VIDEO-1  
INPUT  
OUTPUT  
AV-14FN15  
AV-20NN15  
VIDEO-1  
OUTPUT  
INPUT  
VIDEO  
AUDIO  
VIDEO  
AUDIO  
=
-
0
=-  
0
No. Button/terminal  
Description  
1
I (main power)  
Press to turn on or turn off the TV’s main power.  
2
Power lamp  
Indicate the TV is being turned on or off.  
No color : TV’s main power is being turned off.  
Red : TV’s main power is being turned on.  
Lights when the TV is in the OFF TIMER mode.  
3
4
5
6
7
8
9
0
-
=
TIMER lamp  
Remote control sensor  
VOLUME M  
CHANNELM  
MENU  
Press to adjust the volume level.  
Press to select the desired channel.  
Press to display the menu.  
Video and audio input jacks for VIDEO-2 mode.  
Headphone jack.  
Antenna socket.  
Video and audio output jacks.  
Video and audio input jacks for VIDEO-1 mode.  
IN (VIDEO-2)  
OUTPUT  
VIDEO-1 INPUT  
How to operate the menus with the TV button  
Work as same as the button on the  
remote control unit  
TV button  
Note  
MENU  
MENU/OK button  
To display main menu and exit  
menu after finish setting.  
CHANNEL M  
VOLUME M  
/5 button  
2/3 button  
To select menu function.  
To adjust the desired function.  
5
 
Setting up your TV  
CAUTION  
Turn off the equipment including the TV before connecting.  
1 Connecting the antenna  
To install rod antenna  
Install into the top-rear holder. Once installed, it cannot be removed.  
(1)  
Indoor antenna  
Rod antenna  
Antenna holder  
VHF/UHF outdoor antenna  
(2)  
(3)  
Matching  
antenna  
adapter  
(supplied)  
Illustration of AV-14FN15 only  
If you connect a VCR, connect the antenna output jack of your VCR and the antenna jack on the TV  
with the antenna cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of  
the TV with the video cable and audio cables. For details, see the manual of your VCR.  
VHF/UHF outdoor antenna  
3 Inserting batteries into the remote  
control.  
Insert two batteries by following the ª and  
Rear of the TV  
· polarities and inserting the · end first.  
CAUTION:  
Follow the cautions printed on the batteries.  
Notes:  
• Use AA/R6/UM-3 dry cell batteries.  
• If the remote control does not work  
To audio/video  
properly, install new batteries. The supplied  
To RF  
output  
output  
batteries are for testing, not regular use.  
VCR  
To antenna input  
The illustration shown is just a sample. It may  
not be same as your TV.  
2 Connecting the compatible AC plug  
to the AC outlet.  
4 Turn on the TV by pressing the main  
power button.  
JVC logo appears on the screen.  
6
 
Setting up your TV (continued)  
5 Making the initial settings  
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then the TV will operate  
by following steps as below:  
7
• Press the red button to cancel the SETUP  
• Press 5/button to select AIR or CABLE,  
press the MENU/OK button. TV will start  
searching for the channels.  
TOUR RESTART function.  
If you want to make initial settings again  
when the next time you turn on the TV,  
press the MENU/OK button to activate the  
SETUP TOUR RESTART function.  
To stop AUTO PROGRAM, press MENU/OK  
button.  
To complete the initial setting, press the  
MENU/OK button. To set undesired  
channels to be skipped, see page 12.  
• If the JVC logo does not appear, use AUTO PROGRAM function to make the initial  
settings. This function is located in the INSTALL menu.  
• If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO  
button to exit from initial settings.  
7
 
Basic setting for picture  
To operate this function with a menu:  
MENU PICTURE PICTURE MODE  
COLOR SYSTEM  
You can select the appropriate color system when  
the picture is not clear or no color appears.  
To return the USER setting to the default, press  
the blue button when the PICTURE SETTING  
menu appears.  
Press the COLOR SYSTEM button to select a  
setting.  
In TV mode: NTSC 3.58 MHz (Fixed)  
In VIDEO mode:  
Adjusting the picture - USER  
You can adjust the desired picture setting when  
selecting USER in PICTURE MODE.  
AUTO  
NTSC4.43  
To operate this function with a menu:  
PAL  
SECAM  
NTSC3.58  
1 Select the USER in PICTURE MODE under  
PICTURE menu.  
MENU  
PICTURE  
PICTURE FEATURES  
COLOR SYSTEM  
MENU  
PICTURE  
PICTURE MODE  
USER  
For the color system in each country or region,  
see the table below:  
2 Select the PICTURE SETTING in PICTURE  
menu, then adjust the setting.  
Area  
Country or Region  
System  
Bahrain, Kuwait, Oman, Qatar,  
United Arab Emirates, Yemen, etc.  
Indonesia, Malaysia, Singapore,  
MENU  
PICTURE  
PICTURE SETTING  
PAL  
PICTURE  
2 : Lower  
3 : Higher  
3 : Brighter  
3 : Higher  
3 : Deeper  
3 : Greenish  
Asia, Middle Thailand, India, etc.  
BRIGHT  
DETAIL  
COLOR  
TINT*  
2 : Darker  
2 : Softer  
2 : Lighter  
2 : Reddish  
East  
China, Vietnam, etc.  
Hong Kong, etc.  
PAL  
PAL  
Islamic Republic of Iran, Lebanon,  
Saudi Arabia, etc.  
SECAM  
*TINT can only be adjusted in NTSC system.  
Philippines, Taiwan, Myanmar, etc. NTSC  
Russia, etc.  
SECAM  
PAL  
PAL  
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
WHITE BALANCE  
Europe  
You can change the white balance of the picture  
to better match the type of video being viewed.  
Select the WHITE BALANCE in the PICTURE  
menu, then choose the desired setting.  
PAL  
Oceania  
Africa  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, etc.  
PAL  
PAL  
PAL  
MENU  
PICTURE  
WHITE BALANCE  
Egypt, Morocco, etc.  
SECAM  
NORMAL  
COOL  
Normal white balance.  
Bluish white.  
WARM  
Reddish white.  
PICTURE MODE  
You can choose the desired picture setting with  
one touch.  
Press the PICTURE MODE button to select a  
setting.  
SOFT  
Softens contrast and sharpness.  
Heightens contrast and sharpness.  
Standard picture setting.  
You can change this picture setting  
as you like.  
BRIGHT  
STANDARD  
USER  
Select USER and adjust following  
items in the PICTURE SETTING menu.  
(PICTURE, BRIGHT, DETAIL, COLOR,  
TINT*)  
About the basic operations of the menu,  
please see the “How to operate menus  
and menus locations” on page 4.  
*TINT can only be adjusted in NTSC system.  
8
 
Advance setting for picture  
BLUE BACK  
You can set the TV to automatically change to a  
blue screen and mute the sound if the signal is  
weak or absent, or when there is no input from  
an antenna.  
Select the BLUE BACK in the INSTALL menu,  
then choose ON or OFF.  
MENU  
INSTALL  
BLUE BACK  
If you wish to continue viewing the poor picture,  
cancel the BLUE BACK function.  
Original features for picture  
CLOSED CAPTION  
If they are included in a program, you can view  
closed captions or text information.  
Press the CLOSED CAPTION button to select a  
setting.  
OFF  
CLOSED CAPTION  
TEXT  
To operate this function with a menu:  
1 Select the CLOSED CAPTION in INPUT  
menu, then choose “CAPTION” or  
“TEXT”.  
MENU  
INPUT  
CLOSED CAPTION  
2 Press the 2/3 button to select the desired  
caption or text channel.  
Advanced setting for sound  
AI VOLUME  
You can adjust the volume of all the channels  
and video inputs to the same level automatically.  
Select the AI VOLUME in SOUND menu, then  
choose ON or OFF.  
MENU  
SOUND  
AI VOLUME  
About the basic operations of the menu,  
please see the “How to operate menus  
and menus locations” on page 4.  
9
 
Favorite channel and video setting  
To register the favorite channel  
You can register and recall 4 favorite channels by  
using the color buttons (red, green, yellow, blue).  
To adjust the video setting  
(VIDEO SETTING)  
You can adjust the picture settings for video  
inputs.  
1 In TV mode, select a TV channel (CH02-  
CH69, CC01-CC125) you desired to register.  
1 Display the PICTURE menu and select  
VIDEO SETTING in PICTURE FEATURES  
menu.  
2 Press and hold a color button for 3  
seconds or more.  
“FAVORITE CHANNEL 7 PROGRAMMED!”  
appears on the screen and current channel  
is registered.  
MENU  
PICTURE  
VIDEO SETTING  
PICTURE FEATURES  
2 Select VIDEO STATUS in VIDEO SETTING  
menu, then choose the desired video  
input.  
3 To register other favorite channels, repeat  
Step 1 to 2.  
To recall the favorite channel, press the color  
button.  
VIDEO SETTING  
VIDEO STATUS  
When the TV is in menu mode, favorite channel  
function is not available.  
To adjust favorite channel setting  
(FAVORITE CH SETTING)  
You can adjust the picture settings for the favorite  
channels.  
3 Select EFFECT, then press 2/3 button to  
choose ON. To cancel the settings, choose  
OFF.  
1 Display the PICTURE menu and select  
FAVORITE CH SETTING in PICTURE  
FEATURES menu.  
4 Select the desired item that you wish to  
adjust.  
MENU  
PICTURE  
PICTURE FEATURES  
PICTURE  
TINT  
BRIGHT  
COLOR  
DETAIL  
FAVORITE CH SETTING  
2 Select FAVORITE CHANNEL in FAVORITE  
CH SETTING menu, then choose the  
desired favorite channel.  
5 Press the MENU/OK button to exit the  
menu.  
FAVORITE CH SETTING  
FAVORITE CHANNEL  
3 Select EFFECT, then press 2/3 button to  
choose ON.  
To cancel the settings, choose OFF.  
4 Select the desired item that you wish to  
adjust.  
PICTURE  
TINT  
BRIGHT  
COLOR  
DETAIL  
5 Press the MENU/OK button to exit the  
menu.  
About the basic operations of the menu,  
please see the “How to operate menus  
and menus locations” on page 4.  
10  
 
Customized setting  
VNR  
AUTO SHUTOFF  
You can reduce the picture noise.  
Select the VNR in the PICTURE FEATURES menu  
under PICTURE menu, then choose a setting of  
VNR function.  
You can set the TV to turn off automatically  
when no signal is received for about 15 minutes  
or longer after the end of a broadcast.  
Select AUTO SHUTOFF in INSTALL menu, then  
choose ON or OFF.  
MENU  
VNR  
PICTURE  
PICTURE FEATURES  
MENU  
INSTALL  
AUTO SHUTOFF  
The AUTO SHUTOFF function does not turn off  
the TV’s main power.  
The AUTO SHUTOFF function is not available in  
video mode.  
OFF  
AUTO  
MIN  
VNR is turned off.  
Effect of VNR is automatically controlled.  
Effect of VNR becomes minimum level.  
Effect of VNR becomes maximum level.  
MAX  
If you select MAX, the picture becomes softer  
even if the original picture is sharp.  
EXT. INPUT (TV/ VIDEO)  
You can select TV or video terminal input with  
one touch.  
Press the TV/VIDEO button to select an input.  
CHILD LOCK  
You can disable the front control buttons of the  
TV.  
To operate this function with a menu:  
MENU  
INPUT  
EXT.INPUT  
Select the CHILD LOCK in the FEATURES menu,  
then choose ON or OFF.  
MENU  
FEATURES  
CHILD LOCK  
DISPLAY  
You can display the program number, video  
terminal number on the screen.  
Press the DISPLAY button to display the indica-  
tion on screen.  
OFF TIMER  
You can set the TV to turn off automatically to  
standby mode after a set time.  
Press the OFF TIMER button to select a desired  
period of time.  
To operate this function with a menu:  
MENU  
INPUT  
DISPLAY  
OFF TIMER  
0
120  
10  
You can set the period of time to a maximum of  
120 minutes in 10-minute steps.  
To operate this function with a menu:  
MENU  
FEATURES  
OFF TIMER  
When the elapsed of time left one minute,  
“GOOD NIGHT!” appears on the screen.  
You can display the OFF TIMER menu again to  
confirm or change the remaining time.  
About the basic operations of the menu,  
please see the “How to operate menus  
and menus locations” on page 4.  
11  
 
TV channel presetting  
To register the TV channels auto-  
matically  
You can register the TV channels into the TV’s  
channel list automatically.  
1 Display the INSTALL menu.  
MENU  
INSTALL  
2 Choose AUTO PROGRAM, then press the  
MENU/OK button.  
3 Press the 5/button to select AIR or  
CABLE, then press the MENU/OK button.  
AUTO PROGRAM function starts, and the  
channels received are registered automati-  
cally.  
4 “SETUP TOUR RESTART?” appears.  
To start the  
SETUP TOUR  
Press the MENU/OK button.  
Then proceed to step 5 of  
“Setting up your TV” on page  
7.  
To skip the  
Press the Red button.  
SETUP TOUR  
5 The CHANNEL SUMMARY menu appears.  
For details of “SETUP TOUR”, see page 7.  
CHANNEL SUMMARY  
You can set undesired channels to be skipped.  
Channels set to be skipped cannot be selected by  
the CHANNEL M button.  
1 Display the INSTALL menu.  
MENU  
INSTALL  
2 Choose CHANNEL SUMMARY, then press  
the MENU/OK button. CHANNEL SUM-  
MARY menu appears.  
3 Choose the channel which you want to  
skip. The skip can be set to all channels of  
AIR (CH02-CH69) and CABLE (CC01-  
CC125).  
4 Press the yellow button to skip the  
channel. To cancel the skip, press the blue  
button.  
About the basic operations of the menu,  
please see the “How to operate menus  
and menus locations” on page 4.  
5 Press the MENU/OK button to exit the  
menu.  
12  
 
Additional preparation  
The illustrations shown in this section are for AV-20NN15 only, which are used for explanation pur-  
poses. Your TV may not look exactly the same as the illustration.  
Before connecting  
• Read the manuals provided with the devices  
for the proper connection.  
Front of the TV  
Camcorder or TV game  
Turn off all the devices including the TV.  
• Note that connecting cables are not supplied.  
Headphones  
Rear of the TV  
VCR (for playing)  
DVD player  
(Composite signals)  
VCR (for recording)  
Troubleshooting  
If a problem occurs when you are using the TV, check the following troubleshooting guide before  
calling for repair.  
No picture,  
no sound  
Snowy picture  
• Deactivate the BLUE BACK function  
if it is turned on.  
• Check the antenna cable and its  
connection with the TV.  
• Interference occurs caused by other  
devices such as an amplifier,  
personal computer, or a hair drier.  
Move such devices away from your  
TV.  
Cannot operate the• The batteries may be exhausted.  
remote control  
Replace with new batteries (see  
page 6).  
• Ensure that you are operating the  
remote less than seven meters from  
the front of your TV.  
Stripes appear  
on the picture  
Cannot operate the• Press TV/VIDEO button to return to  
menus  
TV mode and try operating the  
menus.  
Cannot operate the• Deactivate the CHILD LOCK  
Double-pictures • Interference occurs caused by  
(ghosting) occur  
front control  
buttons  
function if it is turned on (see page  
11).  
signal reflecting from mountains or  
building. Try to adjust the antenna  
direction or use a better directional-  
ity antenna.  
• Choose the appropriate color  
system. Refer to “COLOR SYSTEM”  
on page 8.  
• Adjust the COLOR or BRIGHT  
setting. Refer to Adjusting the  
picture - USER” on page 8.  
TV turns off  
suddenly  
• This may due to the AUTO SHUT  
OFF function is activated. Press the  
POWER button to turn on the TV.  
Poor picture  
Color patches  
appear at the  
corner of the  
screen  
• This may due to a magnetized  
device such as a speaker near to  
your TV. Keep the device apart  
from your TV. Alternately, you can  
also use the magnetically shielded  
speaker.  
White and bright • Inevitable phenomenon due to the  
still image look as nature of the picture tube. This is  
if it were colored  
Image takes a  
• A short periode of time is required  
not a malfunction.  
short period to be to stabilize the image.  
displayed  
This is not a malfunction.  
Top of the image • This is due to the condition of the  
from software  
products or video  
tape is distorted  
video signal whereby the image  
was not recorded properly.  
This is not a malfunction.  
TV emits a  
crackling sound  
• This is due to a sudden change in  
temperature and it is not a  
malfunction. If the crackling sound  
is too frequent, request your service  
technician for inspection.  
Feel a slight  
• This is due to the static electricity  
of the picture tube and it will not  
electric shock  
when touching the harm the human body. This is not a  
TV screen  
malfunction.  
13  
 
Specifications  
TV RF systems  
M
Color systems  
TV mode: NTSC 3.58 MHz  
VIDEO mode: PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz  
Receiving channels  
VHF low channel (VL), VHF high channel (VH), UHF channel (U)  
Receives cable channels in mid band, super band and hyper band.  
Power requirements  
AC 110 to 240 V, 50/60 Hz  
External input / output  
VIDEO-1:  
VIDEO input, AUDIO input  
VIDEO input, AUDIO input,  
VIDEO output, AUDIO output  
stereo mini jack (3.5 mm diameter,  
sound is monaural)  
VIDEO-2:  
OUTPUT:  
Headphone jack:  
Viewing Screen size (Visible area)  
AV-14FN15:  
AV-20NN15:  
335.4 mm  
480.0 mm  
Design and specifications are subject to change without notice.  
14  
 
MEMO  
15  
 
© 2005 Victor Company of Japan, Limited  
0105-NIC-JMT  
 
COLOR TELEVISION  
EQUALIZER • CINEMA SURROUND • COMPONENT INPUT  
Contents  
Knowing your TV’s features ....................................................... 3  
Remote control buttons and basic functions .............................. 4  
TV buttons and functions ........................................................... 6  
Setting up your TV ..................................................................... 7  
Basic setting for picture.............................................................. 9  
Advanced setting for picture .....................................................11  
Basic setting for sound............................................................. 12  
Advanced setting for sound ..................................................... 13  
Favorite channel and video setting .......................................... 14  
Customized setting .................................................................. 15  
TV channel presetting .............................................................. 17  
Additional preparation .............................................................. 18  
Troubleshooting ....................................................................... 19  
Specifications ........................................................................... 20  
AV-21CA15  
AV-21YA15  
AV-14FT15  
INSTRUCTIONS  
GGT0071-001A-H  
 
Thank you for buying this JVC color television.  
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.  
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT  
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.  
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE  
FOLLOWING RULES REGARDING THE USE OF THIS TV.  
7
8
If you are not going to use this TV for a long period of time, be sure to  
disconnect the AC plug from the AC socket.  
The apparatus shall not be exposed to dripping or splashing and that  
no objects filled with liquids, such as vases, shall be placed on the  
apparatus.  
1
2
Operate only from the power source indicated on the rear of the TV.  
Avoid damaging the power cord and mains plug. When unplugging the  
TV, grasp the mains plug. Do not pull on the power cord.  
WARNING: <AV-21YA15 only>  
A REMOVABLE PLASTIC COVER IS FIXED TO THE  
TELEVISION’S FRONT AUDIO/VIDEO CONNECTOR. TO  
PREVENT THIS COVER FROM BEING ACCIDENTALLY  
SWALLOWED BY BABIES OR CHILDREN, REMOVE IT  
FROM THE TELEVISION AND STORE IT IN A SAFE  
PLACE. IF THE COVER IS SWALLOWED SEEK THE  
ADVICE OF A DOCTOR IMMEDIATELY.  
3
Never block or cover the ventilation openings.  
Never install the TV where good ventilation is unattainable.  
When installing this TV, leave spaces for ventilation around the TV of  
more than the minimum distances as shown.  
15 cm  
10 cm  
10 cm  
15 cm  
4
5
Do not allow objects or liquid into the cabinet openings.  
In the event of a fault, unplug the unit and call a service technician. Do  
not attempt to repair it yourself or remove the rear cover.  
6
The surface of the TV screen is easily damaged. Be very careful with it  
when handling the TV. Should the TV screen become soiled, wipe it  
with a soft dry cloth. Never rub it forcefully. Never use any cleaner or  
detergent on it.  
2
 
Knowing your TV’s features  
Main features  
MTS  
You can listen to the stereo sound or SAP from TV program broadcasting by MTS system.  
(SAP: Second audio program.)  
CLOSED CAPTION  
You can display dialog on the screen from TV broadcasting with Closed Caption system.  
You may also be able to display some information in text form if available.  
FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press.  
AI VOLUME  
TV adjusts the volume automatically to the same level for all TV channels to avoid sudden  
change of the volume when selecting different TV channel.  
VNR  
You can reduce the picture noise when viewing noisy TV programs or video sources.  
Confirm your TV’s functions  
Some functions shown in this remote control may not be available for your TV.  
When you press a button concerned to a function that is not available for your TV, it does not work and the  
logo “Ø” appears on the screen. For a function that is not available for your TV, it is not displayed in the  
menu.  
3
 
Remote control buttons and basic functions  
No. Press  
To  
1
2
3
4
5
6
7
POWER  
MENU/OK  
Turn on or off the TV from standby mode.  
Display menu and confirm selected function.  
5 / / 2 / 3 Select and adjust menu function.  
CHANNEL -/+ Select the desired channel number.  
VOLUME -/+ Adjust the volume level.  
TV/VIDEO  
MUTING  
Select TV or video terminal input.  
Turn off the volume.  
Press this button again to resume the volume.  
8
DISPLAY/BACK Display the program number or video terminal number on the screen.  
On the other hand, you can use this button to return to the previous menu.  
9
!
CLOSED CAPTION Display information in text which are broadcasted by some TV channels.  
0~9, 100+  
Select the program number. For three digits program number, press 100+, then press the  
number button.  
+
"
RETURN  
a) Return to the frequently view channel with one touch.  
1 Choose the channel you want to register.  
2 Press and hold RETURN+ button until RETURN PLUS PROGRAMMED!appears.  
To cancel, press and hold RETURN+ button until RETURN PLUS CANCELED!appears.  
b) Return to the previously viewed channel, if you have not set or have canceled the Return  
channel as above.  
4
 
Remote control buttons and basic functions (continued)  
How to operate menus and menus locations  
Top menu  
MENU INPUT  
2nd menu  
EXT. INPUT  
DISPLAY  
CLOSED CAPTION P.15  
PICTURE MODE P.9  
Location 3rd menu  
Location  
P.16  
P.16  
To  
Operation  
Note  
Display the MENU Press the MENU/OK button 2.  
To exit the MENU,  
press the DISPLAY/  
BACK button* 8 or  
choose EXIT menu.  
PICTURE  
*If you want to  
adjust PICTURE  
SETTING menu,  
you must set  
PICTURE SETTING P.10  
WHITE BALANCE P.10  
Display the top  
menu  
Press 5/buttons 3 to choose a Press button 3 to  
menu title. Then press MENU/OK display the next page  
PICTURE  
VNR  
P.15  
button 2.  
for more functions.  
FEATURES  
PICTURE MODE  
menu to USER.  
FAVORITE CH SETTING P.14  
VIDEO SETTING  
COLOR SYSTEM  
Display the 2nd  
menu  
Press 5/buttons 3 to choose a  
menu title. Then press MENU/OK  
button 2.  
P.14  
P.9  
SOUND  
AI VOLUME  
MTS  
SOUND MODE  
EQUALIZER  
BALANCE  
SOUND TURBO  
CINEMA SURROUND P.13  
OFF TIMER  
CHILD LOCK  
AUTO PROGRAM P.17  
CHANNEL SUMMARY P.17  
BLUE BACK  
AUTO SHUTOFF  
P.13  
P.13  
P.12  
P.13  
P.12  
P.12  
Display the 3rd  
menu  
Press 5/buttons 3 to choose a  
menu title. Then press MENU/OK  
button 2.  
*If you want to  
adjust  
EQUALIZER  
menu, you must  
set SOUND  
MODE menu to  
USER.  
Return to the  
previous menu  
Press the DISPLAY/BACK button*  
8.  
Press the MENU/OK  
button 2 to exit from  
Choose the setting Press 5/buttons 3 to choose  
of a function  
a function. Then press the 2/3  
buttons 3 to change the setting. the menu.  
FEATURES  
P.15  
P.15  
Adjust the effect  
level of a function  
Press 5/buttons 3 to choose  
a function. Then press the 2/3  
buttons 3 to adjust the effect  
level.  
INSTALL  
Display the sub  
Press the 5/buttons 3 to  
P.11  
P.16  
menu of a function. choose a function. Then press  
MENU/OK buttons 2 to display  
the sub menu.  
EXIT  
The following chart shows locations of functions in menus. In this manual,  
location of a function is described as follows:  
2nd menu  
MENU  
Top menu  
MENU  
2nd menu  
Top menu  
3rd menu  
Note: Some functions have the 4th menus as the sub-menus.  
* To exit the menu, the on screen display will show BACK indicated in  
blue. But it doesnt refer to the blue button on the remote control.  
Instead, it refers to the DISPLAY/BACK button on the remote control.  
5
 
TV buttons and functions  
The illustrations shown below is for AV-14FT15 and  
AV-21YA15 only, which are used for explanation  
purpose.  
No. Button/terminal Description  
Page  
1
2
L (main power) Press to turn on or turn off the TVs main power.  
POWER lamp  
Indicate the TV is being turned on or off.  
Your TV may not look exactly the same as illustrated.  
No color: TVs main power is being turned off.  
Red:  
TVs main power is being turned on.  
Front of the TV  
Note: When you turn off the power switch while TV is in standby  
mode, the light of power lamp will be off in 10 -15 seconds.  
AV-14FT15  
3
4
5
6
7
8
9
!
Remote control sensor  
8
7
6
5
4
3
# 2  
1
VOLUME -/+  
CHANNEL -/+  
MENU  
Press to adjust the volume level.  
Press to select the desired channel.  
Press to display the menu.  
Video and audio input jacks for VIDEO-2 mode.  
Headphone jack.  
Aerial socket.  
TIMER POWER  
MENU  
OK  
CHANNEL  
VOLUME  
V
L
/
MONO  
IN (VIDEO-2)  
R
IN (VIDEO-2)  
18  
18  
7
AV-21YA15  
OUTPUT  
Video and audio output jacks. (The component video  
signal cannot be output.)  
8
7
6
5
4
3
# 2  
1
18  
7
"
#
VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-1 mode  
TIMER lamp  
Indicate the OFF TIMER function is being turned on or off. –  
No color : The OFF TIMER function is being turned off.  
Orange : The OFF TIMER function is being turned on.  
TIMER POWER  
MENU  
OK  
CHANNEL  
VOLUME  
V
L
/
MONO  
IN (VIDEO-2)  
R
How to operate the menus with the TV button  
Rear of the TV  
Work as same as the button on the  
TV button  
Note  
remote control unit  
AV-21YA15  
AV-14FT15  
MENU  
MENU/OK button  
To display main menu and exit  
menu after finish setting.  
VIDEO-1  
INPUT  
VIDEO-1  
OUTPUT  
INPUT  
OUTPUT  
CHANNEL -/+ /5 button  
VOLUME -/+ 2/3 button  
To select menu function.  
V
L
V
L
To adjust the desired function.  
V
L
V
L
/
MONO  
/
MONO  
R
R
R
R
"
!
9
!
9
"
6
 
Setting up your TV  
CAUTION  
Rear of TV  
Turn off the equipment including the TV before connecting.  
VIDEO-1  
INPUT  
OUTPUT  
1 Connecting the aerial cable.  
(1)  
VHF/UHF outdoor aerial  
V
L
V
L
Matching aerial  
adapter (supplied)  
(2)  
/
MONO  
To video  
output  
To audio  
output  
To RF  
output  
R
R
VCR  
To aerial input  
(3)  
The illustration shown is just a sample. It may not be same as your TV.  
75-ohm coaxial cable (not supplied)  
2 Connecting the compatible main plug to the AC  
outlet.  
* Except model AV-21CA15  
Indoor aerial  
Rod aerial*  
Matching  
aerial  
3 Inserting batteries into the remote control.  
Insert two batteries by following the + and -  
polarities and inserting the - end first.  
CAUTION:  
adapter  
Aerial holder  
(supplied)  
Follow the cautions printed on the batteries.  
Notes:  
Use AA/R6/UM-3 dry cell batteries.  
It the remote control does not work properly, fit new  
batteries. The supplied batteries are for testing, not regular use.  
Rear of AV-14FT15  
4 Turn on the TV by pressing the main  
power button.  
If you connect a VCR, connect the aerial output jack of your VCR  
and the aerial jack on the TV with the aerial cable. Then connect the  
output jacks of your VCR and the VIDEO-1 input jacks of the TV  
with the video cable and audio cables. For details, see the manual  
of your VCR.  
JVC logo appears on the screen.  
7
 
Setting up your TV (continued)  
5 Making the initial settings  
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then the TV will operate by following steps as below:  
AUTO PROGRAM  
CHANNEL SUMMARY  
AUTO PROGRAM  
AUTO PROGRAM  
CH/CC SKIP  
AIR  
CABLE  
SETUP TOUR RESTART?  
CH02  
CH03  
CH04  
CH05  
CH06  
CH07  
CH08  
I
CH 12  
I
I
I
22%  
.
OK  
RESTART  
NO  
I
BACK  
I
OK  
BACK  
I
ISKIP  
OK  
OK  
ICANCEL  
.
To complete the initial  
setting, press the  
MENU/OK button. To  
set undesired  
channels to be  
skipped, see page 17.  
To stop AUTO  
PROGRAM,  
press MENU/OK  
button.  
Press 5/button to select  
AIR or CABLE, press the  
MENU/OK button.TV will  
start searching for the  
channels.  
Press the red button to  
cancel the SETUP TOUR  
RESTART function.  
If you want to make initial  
settings again when the  
next time you turn on the  
TV, press the MENU/OK  
button to activate the  
SETUP TOUR RESTART  
function.  
If the JVC logo does not appear, use AUTO PROGRAM function to make the initial settings. This function is located in the INSTALL  
menu.  
If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings.  
8
 
Basic setting for picture  
COLOR SYSTEM  
PICTURE MODE  
You can select the appropriate color system when the picture is  
not clear or no color appears.  
You can choose the desired picture setting with one-touch.  
Press the PICTURE MODE button to select a setting.  
Press the COLOR SYSTEM button to select a setting.  
SOFT  
Softens contrast and sharpness.  
BRIGHT  
STANDARD  
USER  
Heightens contrast and sharpness.  
Standard picture setting.  
You can change this picture setting as you like.  
Select USER and adjust following items in the  
PICTURE SETTING menu. (PICTURE, BRIGHT,  
DETAIL, COLOR, TINT*)  
In TV mode: NTSC 3.58 MHz (Fixed).  
In VIDEO mode:  
AUTO  
PAL  
SECAM  
NTSC3.58  
NTSC4.43  
*TINT can only be adjusted in NTSC system.  
To operate this function with a menu:  
To operate this function with a menu:  
MENU  
PICTURE menu  
PICTURE FEATURES menu  
MENU  
PICTURE menu  
PICTURE MODE  
COLOR SYSTEM  
To return the USER setting to the default, press the blue button  
when the PICTURE SETTING menu appears.  
For the color system in each country or region, see the table  
below:  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
Area  
Country or Region  
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,  
System  
Yemen, etc.  
PAL  
Indonesia, Malaysia, Singapore, Thailand, India, etc.  
Asia, Middle  
East  
China, Vietnam, etc.  
Hong Kong, etc.  
PAL  
PAL  
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
NTSC  
SECAM  
PAL  
PAL  
PAL  
Europe  
Oceania  
Africa  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, etc.  
PAL  
PAL  
PAL  
Egypt, Morocco, etc.  
SECAM  
9
 
Basic setting for picture (continued)  
Adjusting the picture – USER  
WHITE BALANCE  
You can adjust the desired picture setting when selecting USER  
in PICTURE MODE.  
You can change the white balance of the picture to better match  
the type of video being viewed.  
Select the WHITE BALANCE in the PICTURE menu, then choose  
the desired setting.  
1 Select the USER in PICTURE MODE under PICTURE menu.  
PICTURE menu  
PICTURE MODE  
MENU  
USER  
PICTURE menu  
MENU  
WHITE BALANCE  
2 Select the PICTURE SETTING in PICTURE menu, then adjust  
NORMAL  
COOL  
WARM  
Normal white balance.  
Bluish white.  
Reddish white.  
the setting.  
PICTURE menu  
PICTURE SETTING  
MENU  
PICTURE  
2 : Lower  
2 : Darker  
2 : Softer  
2 : Lighter  
2 : Reddish  
3 : Higher  
3 : Brighter  
3 : Higher  
3 : Deeper  
3 : Greenish  
BRIGHT  
DETAIL  
COLOR  
TINT*  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
*TINT can only be adjusted in NTSC system.  
10  
 
Advanced setting for picture  
BLUE BACK  
You can set the TV to automatically change to a blue screen and  
mute the sound if the signal is weak or absent, or when there is  
no input from an antenna.  
Select the BLUE BACK in the INSTALL menu, then choose ON or  
OFF.  
MENU  
INSTALL menu  
BLUE BACK  
If you wish to continue viewing the poor picture, cancel the BLUE  
BACK function.  
About the basic operations of the menu, please see the “How  
to operate menus and menus locations” on page 5.  
11  
 
Basic setting for sound  
BALANCE  
SOUND MODE  
You can adjust the volume balance between the left and right  
speakers.  
Select the BALANCE in SOUND menu, then adjust the setting.  
You can choose the desired sound setting.  
Select the SOUND MODE in SOUND menu, then choose the  
setting.  
SOUND menu  
MENU  
BALANCE  
MENU  
SOUND menu  
SOUND MODE  
USER  
You can change this sound setting as you like.  
Select USER and adjust the frequencies in EQUALIZER  
(100, 300, 1K, 3K, 8K Hz).  
For details, see “EQUALIZER” on page 13.  
Emphasize on both vocal sound and music.  
Emphasize on music effect.  
SOUND TURBO  
You can enjoy the emphatic low and high frequency levels.  
Press the SOUND TURBO to select ON or OFF.  
To operate this function with a menu:  
DYNAMIC  
MUSIC  
NEWS  
MENU  
SOUND menu  
SOUND TURBO  
Emphasize on vocal sound.  
About the basic operations of the menu, please see the “How  
to operate menus and menus locations” on page 5.  
12  
 
Advanced setting for sound  
CINEMA SURROUND  
EQUALIZER  
You can enjoy an enhanced sound for wider audience.  
Press the CINEMA SURROUND button to select a setting.  
You can adjust the sound level of each frequencies when selecting  
USER mode in SOUND MODE.  
OFF  
Cancel the function.  
1 Select the USER in SOUND MODE under SOUND menu.  
HIGH  
LOW  
MONO  
Listen to sound with more wider audience effect.  
Listen to sound with less wider audience effect.  
Listen to mono sound with stereo effect.  
SOUND menu  
MENU  
SOUND MODE  
USER  
2 Select the EQUALIZER in SOUND menu.  
MENU  
SOUND menu  
EQUALIZER  
To operate this function with a menu:  
The following display appears.  
SOUND menu  
MENU  
CINEMA SURROUND  
EQUALIZER  
If slight volume distortion occurs when you select HIGH mode,  
change the setting to LOW mode. The CINEMA SURROUND  
effect will be less noticeable.  
100 300  
1K  
3K  
8K Hz  
If you use CINEMA SURROUND and SOUND TURBO together,  
volume distortion might occurs.  
BACK  
I
OK  
.
MTS  
3 Select and adjust the desired frequencies.  
4 Press the MENU/OK button to exit the menu.  
You can enjoy the stereo and SAP broadcasted programs.  
Select the MTS in SOUND menu, then choose the desired mode.  
Adjust high frequency will affect higher pitch sound and vice versa.  
SOUND menu  
MTS  
MENU  
AI VOLUME  
STEREO  
SAP  
MONO  
Select stereo sound.  
Select second audio programs.  
Select monaural sound.  
You can adjust the volume of all the channels and video inputs to  
the same level automatically.  
Select the AI VOLUME in SOUND menu, then choose ON or OFF.  
This function is not available in video mode.  
SOUND menu  
MENU  
AI VOLUME  
About the basic operations of the menu, please see the “How  
to operate menus and menus locations” on page 5.  
13  
 
Favorite channel and video setting  
4 Select the desired item that you wish to adjust.  
PICTURE BRIGHT DETAIL COLOR  
To register the favorite channel  
You can register and recall 4 favorite channels by using the color  
buttons (red, green, yellow, blue).  
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)  
TINT  
1 In TV mode, select a TV channel (CH02-CH69, CC01-CC125)  
5 Press the MENU/OK button to exit the menu.  
you desired to register.  
To adjust the video setting (VIDEO SETTING)  
You can adjust the picture and sound settings for video inputs.  
2 Press and hold a color button for 3 seconds or more.  
FAVORITE CHANNEL I PROGRAMMED!appears on the  
screen and current channel is registered.  
3 To register other favorite channels, repeat Step 1 to 2.  
To recall the favorite channel, press the color button.  
1 Display the PICTURE menu and select VIDEO SETTING in  
PICTURE FEATURES menu.  
MENU  
PICTURE menu  
PICTURE FEATURES menu  
When the TV is in menu mode, favorite channel function is not available.  
VIDEO SETTING  
2 Select VIDEO STATUS in VIDEO SETTING menu, then  
To adjust favorite channel setting  
(FAVORITE CH SETTING)  
You can adjust the picture and sound settings for the favorite channels.  
1 Display the PICTURE menu and select FAVORITE CH  
SETTING in PICTURE FEATURES menu.  
choose the desired video input.  
VIDEO SETTING  
VIDEO STATUS  
VIDEO SETTING  
3 Select EFFECT, then press 2/3 button  
to choose ON.  
VIDEO STATUS  
PICTURE  
BRIGHT  
DETAIL  
COLOR  
VIDEO-1  
MENU  
PICTURE menu  
To cancel the settings, choose OFF.  
PICTURE FEATURES menu  
FAVORITE CH SETTING  
TINT  
SOUND MODE  
EFFECT  
USER  
ON  
2 Select FAVORITE CHANNEL in FAVORITE CH SETTING  
BACK  
I
IRESET  
menu, then choose the desired favorite channel.  
OK  
FAVORITE CH SETTING  
FAVORITE CHANNEL  
3 Select EFFECT, then press 2/3 button  
to choose ON.  
FAVORITE CH SETTING  
4 Select the desired item that you wish to adjust.  
PICTURE BRIGHT DETAIL COLOR  
FAVORITE CHANNEL  
PICTURE  
BRIGHT  
DETAIL  
COLOR  
TINT  
SOUND MODE  
EFFECT  
I
CH02  
To cancel the settings, choose OFF.  
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)  
5 Press the MENU/OK button to exit the menu.  
TINT  
USER  
ON  
BACK  
I
OK  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
.
14  
 
Customized setting  
VNR  
CHILD LOCK  
You can reduce the picture noise.  
You can disable the front control buttons of the TV.  
Select the VNR in the PICTURE FEATURES menu under  
Select the CHILD LOCK in the FEATURES menu, then choose  
PICTURE menu, then choose a setting of VNR function.  
ON or OFF.  
FEATURES menu  
MENU  
CHILD LOCK  
PICTURE menu  
MENU  
PICTURE FEATURES menu  
VNR  
OFF TIMER  
OFF  
AUTO  
MIN  
VNR is turned off.  
You can set the TV to turn off automatically to standby mode after  
a set time.  
Press the OFF TIMER button to select a desired period of time.  
Effect of VNR is automatically controlled.  
Effect of VNR becomes minimum level.  
Effect of VNR becomes maximum level.  
MAX  
OFF TIMER  
If you select MAX, the picture becomes softer even if the original  
picture is sharp.  
0
120  
You can set the period of time  
to a maximum of 120 minutes  
in 10 minutes step.  
10  
CLOSED CAPTION  
If they are included in a program, you can view closed captions or  
text information.  
BACK  
I
OK  
Press the CLOSED CAPTION button to select a setting.  
.
OFF  
CLOSED CAPTION  
TEXT  
To operate this function with a menu:  
FEATURES menu  
MENU  
OFF TIMER  
1 Select the CLOSED CAPTION in INPUT menu, then choose  
When the elapsed of time left one minute, GOOD NIGHT!”  
appears on the screen.  
You can display the OFF TIMER menu again to confirm or  
change the remaining time.  
CAPTION or TEXT.  
CLOSED CAPTION  
INPUT menu  
MENU  
2 Press the 2/3 button to select the desired caption or text  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
channel.  
15  
 
Customized setting (continued)  
EXT. INPUT (TV/VIDEO)  
AUTO SHUTOFF  
You can select TV or video terminal input with one touch.  
Press the TV/VIDEO button to select an input.  
To operate this function with a menu:  
You can set the TV to turn off automatically when no signal is  
received for about 15 minutes or longer after the end of a  
broadcast.  
Select AUTO SHUTOFF in INSTALL menu, then choose ON or  
INPUT menu  
MENU  
EXT. INPUT  
OFF.  
MENU  
INSTALL menu  
AUTO SHUTOFF  
DISPLAY  
The AUTO SHUTOFF function does not turn off the TVs main  
power.  
The AUTO SHUTOFF function is not available in video mode.  
You can display the program number and video terminal number  
on the screen.  
Press the DISPLAY button to display the indication on the screen.  
To operate this function with a menu:  
INPUT menu  
MENU  
DISPLAY  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
16  
 
TV channel presetting  
2 Choose CHANNEL SUMMARY, then press the MENU/OK  
button.  
To register the TV channels automatically  
You can register the TV channels into the TVs channel list  
automatically.  
CHANNEL SUMMARY menu appears.  
CHANNEL SUMMARY  
1 Display the INSTALL menu.  
CH/CC  
SKIP  
INSTALL menu  
MENU  
CH02  
CH03  
CH04  
CH05  
CH06  
CH07  
CH08  
I
I
I
I
.
2 Choose AUTO PROGRAM, then press the MENU/OK button.  
3 Press the 5/button to select AIR or CABLE, then press the  
MENU/OK button.  
BACK  
I
ISKIP  
AUTO PROGRAM function starts, and the channels received  
are registered automatically.  
OK  
ICANCEL  
.
4 SETUP TOUR RESTART?appears.  
3 Choose the channel which you want to skip.  
The skip can be set to all channels of AIR (CH02-CH69) and  
CABLE (CC01-CC125).  
To start the SETUP  
TOUR  
To skip the SETUP  
TOUR  
Press the MENU/OK button. Then proceed to  
step 5 of Setting up your TVon page 8.  
Press the Red button.  
4 Press the yellow button to skip the channel.  
To cancel the skip, press the blue button.  
5 The CHANNEL SUMMARY menu appears.  
For details of SETUP TOUR, see page 8.  
5 Press the MENU/OK button to exit the menu.  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
CHANNEL SUMMARY  
You can set undesired channels to be skipped.  
Channels are to be skipped cannot be selected by the  
CHANNEL -/+ button.  
1 Display the INSTALL menu.  
INSTALL menu  
MENU  
17  
 
Additional preparation  
The illustrations shown in this section are for AV-14FT15 and AV-  
21YA15 only, which are used for explanation purpose. Your TV  
may not look exactly the same as illustrated.  
Connecting to rear component/video input  
terminal and output terminal  
Rear of TV  
AV-14FT15  
Before connecting  
Read the manuals provided with the devices for the proper  
connection.  
VIDEO-1  
OUTPUT  
INPUT  
Turn off all the devices including the TV.  
Note that connecting cables are not supplied.  
VCR (for playing)  
DVD player (composite signals)  
.
V
L
V
L
/
/
MONO  
Connecting to front video input terminal  
VCR (for recording)  
R
R
AV-14FT15  
Front of TV  
Rear of TV  
Camcorder or TV game  
AV-21YA15  
VIDEO-1  
INPUT  
MENU  
OK  
OUTPUT  
V
L
IN (VIDEO-2)  
/
MONO  
R
VCR (for playing)  
DVD player (composite signals)  
Headphones  
AV-21YA15  
V
L
V
L
MENU  
OK  
/
V
L
IN (VIDEO-2)  
/
MONO  
R
MONO  
VCR (for recording)  
R
R
18  
 
Troubleshooting  
If a problem occurs when you are using the TV, check the below  
troubleshooting guide before calling for repair.  
Cannot operate the  
remote control  
The batteries may be exhausted. Replace with  
new batteries (see page 7).  
Ensure that you are operating the remote less  
than seven meters from the front of your TV.  
No picture,  
Deactivate the BLUE BACK function if it is turned  
no sound  
on.  
Cannot operate the  
Press TV/VIDEO button to return to TV mode and  
menus  
try operating the menus.  
Snowy picture  
Check the aerial cable and its connection with the  
TV.  
Cannot operate the  
Deactivate the CHILD LOCK function if it is turned  
front control buttons  
on (see page 15).  
Stripes appear on Interference occurs caused by other devices such  
the picture  
as an amplifier, personal computer, or a hair drier.  
Move such devices away from your TV.  
TV is turned off  
suddenly  
This may due to the AUTO SHUTOFF function is  
activated. Press the POWER button to turn on the  
TV.  
Double-pictures  
(ghosting) occur  
Interference occurs caused by signal reflecting  
from mountains or building. Try to adjust the  
aerials direction or use a better directionality  
antenna.  
Color patches  
appear at the corner  
of the screen  
This may due to the magnetized device such as a  
speaker near to your TV. Keep the device apart  
from your TV. Alternately, you can also use the  
magnetic-shielded speaker.  
Poor picture  
Choose the appropriate color system. Refer to  
COLOR SYSTEMon page 9.  
Adjust the COLOR or BRIGHT setting. Refer to  
Adjusting the picture - USERon page 10.  
Image takes a short  
period to be  
displayed  
Image required time to stabilize before display.  
This is not a malfunction.  
White and bright still Inevitable phenomenon due to the nature of the  
TV may emitted  
crackling sound  
This is due to a sudden change in temperature  
and it is not a malfunction. If the crackling sound  
is too frequent, request your service technician for  
inspection.  
image look as if it  
were colored  
picture tube. This is not a malfunction.  
Top of the image  
from software  
products or video  
tape is distorted  
This is due to the condition of the video signal  
whereby the image was not recorded properly.  
This is not a malfunction.  
Feel a slight electric  
shock when  
touching the TV  
screen  
This is due to the static electricity of the picture  
tube and it will not harm the human body. This is  
not a malfunction.  
Poor sound  
Adjust the sound frequency properly. Refer to  
EQUALIZERon page 13.  
Stereo or bilingual TV channel reception is poor. Change the stereo/  
sound is unclear bilingual mode to mono sound (see page 13).  
19  
 
Specifications  
TV RF systems  
M
Color systems  
TV mode: NTSC 3.58 MHz  
VIDEO mode: PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz  
Receiving channels  
VHF low channel (VL), VHF high channel (VH), UHF channel (U)  
Receives cable channels in mid band, super band and hyper band.  
External input / output  
VIDEO-1:  
VIDEO-2:  
OUTPUT:  
Headphone jack:  
VIDEO input, AUDIO L/R input  
VIDEO input, AUDIO L/R input  
VIDEO output, AUDIO L/R output  
Stereo mini jack (3.5 mm diameter)  
Sound-multiplex systems  
MTS (Multi-Channel Television Sound)  
Viewing Screen size (Visible area)  
AV-21CA15:  
AV-21YA15:  
AV-14FT15:  
XXX.X mm  
508.0 mm  
335.4 mm  
Design and specifications subject to change without notice.  
0105-FLE-JMT  
© 2005 Victor Company of Japan, Limited  
 

Ingersoll Rand Life Jacket 52066477 User Manual
Insignia Clock Radio NS CLBT02 User Manual
Insignia Power Supply NS PCW4050 User Manual
IRiver MP3 Player IFP 1000 User Manual
Jacuzzi Hot Tub J 210 User Guide
JBL Portable Speaker S4Ai User Manual
JVC Car Stereo System Model KD S576 User Manual
Karcher Pressure Washer G 2600 PH User Manual
Kawasaki Utility Trailer ZX 9R User Manual
Kenmore Vacuum Cleaner 11625512 User Manual