JVC Baby Monitor AV 28KM3BN User Manual

DEUTSCH  
ENGLISH  
AV-28KM3BN  
AV-28KM3SN  
BEDIENUNGSANLEITUNG  
FARBFERNSEHGERÄT  
VICTOR COMPANY OF JAPAN, LIMITED  
COLOUR TELEVISION  
INSTRUCTIONS  
50049547  
©2004 VICTOR COMPANY OF JAPAN, LIMITED  
0503-JVC  
 
Contents  
Safety Precautions  
1. Power Source  
Safety Precautions .................................................15  
Remote Control Buttons ........................................16  
Control Panel Buttons............................................17  
The receiver should be operated only from a 220-240V AC,  
50 Hz. outlet. Ensure you select the correct voltage setting  
for your convenience.  
Antenna Connections .............................................17 2. Power Cord  
Preparation..............................................................18 The power supply cord should be placed so that they are not  
likely to be walked on or pinched by items placed upon them  
or against them. Pay particular attention to cord where they  
enter the plug, power outlet, and the point where they exit  
Features .........................................................................18  
Before Switching on your TV ................................18  
Power connection............................................................18  
Aerial Connections ..........................................................18  
How to connect the external equipments.........................18  
Inserting batteries in the remote control handset .............18  
from the receiver.  
3. Moisture and Water  
Do not use this equipment in a humid and damp place (avoid  
the bathroom, the sink in the kitchen, and near the washing  
machine). Do not expose this equipment to rain or water and  
do not place objects filled with liquids on it as this may be  
dangerous.  
Switching the TV ON/OFF ......................................18  
To switch the TV on.........................................................18  
To switch the TV off .........................................................18  
Initial Settings .........................................................18  
Operating with the onset buttons.....................................19  
Operating with Remote Control........................................19  
4. Cleaning  
Before cleaning, unplug the receiver from the main supply  
outlet. Do not use liquid or aerosol cleaners. Use with soft  
and dry cloth.  
Menu System ...........................................................19  
Sound Menu....................................................................19  
Picture Menu ..................................................................20  
Feature Menu..................................................................21  
Install. Menu ...................................................................21  
Program. (Programming) Menu .......................................22  
5. Ventilation  
The slots and openings on the receiver are intended for venti-  
lation and to ensure reliable operation. To prevent overheating,  
these openings must not be blocked or covered in anyway.  
Other Features........................................................23  
6. Lightning  
Sound Mute ....................................................................23  
Information on Screen .....................................................23  
To Display the Time.........................................................23  
Standard .........................................................................23  
VCR Control Buttons.......................................................23  
In case of storm and lightning or when going on holiday, dis-  
connect the power cord from the wall outlet.  
7. Replacement Part  
When replacement parts are required, be sure the service  
technician has used replacement parts which are specified  
by the manufacturer or have the same specifications as the  
original one. Unauthorized substitutions may result in fire,  
electrical shock, or other hazards.  
Teletext....................................................................23  
To operate Teletext ..........................................................23  
To select a page of Teletext .............................................23  
To Select Index Page ......................................................24  
Searching for a teletext page while watching TV..............24  
To Select Double Height Text ..........................................24 8. Servicing  
To Reveal “concealed” Information ...................................24  
Please refer all servicing to qualified personnel. Do not re-  
move cover as this may result in electric shock.  
To StopAutomatic Page Change .....................................24  
To Select a Subcode Page ..............................................24  
To exit Teletext ................................................................24  
Fastext and Toptext ........................................................24  
9. Flame sources  
Do not place naked flame sources on the apparatus.  
Connect the External Equipments........................25  
10. Stand-By  
Via the Euroconnector.....................................................26  
RGB mode ......................................................................26  
AV-2 S Mode...................................................................26  
Via the RCA jacks...........................................................26  
Via the ANT (aerial) socket..............................................26  
TV and Video Recoder (VCR) ..........................................26  
NTSC Playback ..............................................................26  
Copy Facility...................................................................26  
Connecting Headphones .................................................26  
Do not leave your TV stand-by or operating condition when you  
leave your house.  
Warning!  
Any intervention contrary to regulations, in particular, any  
modification of high voltage or a replacement of the picture  
tube may lead to an increased concentration of x-rays. Any  
television modified in this way no longer complies with license  
and must not be operated.  
Tips...........................................................................26  
Specifications..........................................................27  
Instructions for waste disposal:  
Packaging and packaging aids are recyclable and should  
principally be recycled. Packaging materials, such as foil  
bag, must be kept away from children.  
ENGLISH - 15 -  
 
Remote Control Buttons  
= Stand By / Power  
0 - 9 = Direct Program  
Standard Button (PICTURE default settings)  
Colour Buttons  
MENU = Menu Button  
(
) = Cursor Up / Programme Up  
) = Cursor Right / Volume +  
(
Teletext Control Buttons  
VCR Control Buttons  
(
) = Cursor Down / Programme Down  
) = Cursor Left / Volume -  
(
AV = AV Button  
= Information Button  
= Mute  
CAUTION  
RISK OF ELECTRIC SHOCK  
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of  
uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk  
of electric shock of persons.  
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating  
and maintenance (servicing) instructions in the literature accompanying the appliance.  
ENGLISH - 16 -  
 
Control Panel Buttons  
AV-28KM3BN  
AV-28KM3SN  
Antenna Connections  
ENGLISH - 17 -  
 
NOTE: Remove batteries from remote control handset when it is  
not to be used for a long period. Otherwise it can be damaged  
due to any leakage of batteries.  
Preparation  
Place TV on a solid surface.  
For ventilation, leave a space of at least 10 cm free all around  
the set. To prevent any fault and unsafe situations, please do  
not place any objects on top of the set.  
Switching the TV ON/OFF  
You can operate your TV either using the remote control  
handset or directly using the TV onset buttons.  
Features  
To switch the TV on  
• It is a remote controlled colour television.  
Your TV will switch on in two steps:  
• 100 programmes from VHF, UHF bands or cable channels  
can be preset.  
1- Press the power button located on the front of the TV. Then  
the TV switches itself to standby mode and the RED LED  
located below the TV turns on.  
2- To switch on the TV from stand-by mode either:  
Press a digit button on the remote control so that a program-  
me number is selected,  
• It can tune cable channels.  
• Controlling the TV is very easy by its menu driven system.  
• It has two Euroconnector sockets for external devices (such  
as video recorder, video games, audio set, etc.)  
• Front AV Input available.  
or,  
• Stereo sound systems (German+Nicam) are available.  
• Full function Teletext (Fastext, Toptext).  
• It is possible to connect headphone.  
• Direct channel access.  
Press Standby / Power Button or Programme Up and Down  
buttons on the front of the TV or on the remote control re-  
spectively, so the TV will switch on and the RED Led will turn  
GREEN.  
To switch the TV off  
• APS (Automatic Programming System).  
• All programmes can be named.  
• Forward or backward automatic tuning.  
• Sleep timer.  
• Press the stand-by button on the remote control, so the TV  
will switch to stand-by mode and the GREEN LED will be-  
come RED, or,  
• Press the power button located on the front of the TV.  
• Child Lock.  
• Automatic sound mute when no transmission.  
Initial Settings  
The message "PLEASE CHECK ANTENNA CABLE AUTO.  
PROGRAMMING SYSTEM" will be displayed when you turn  
on your TV for the first time.  
• 5 minutes after the broadcasting (closedown), the TV  
switches itself automatically to stand-by mode.  
Before Switching on your TV  
1- Select LANGUAGE with the “  
press the “ ” or “ ” button to select a menu language.  
2- Select COUNTRY with the “ “ or “ ” button, then  
press the “ ” or “ ” button to select the country you are  
now located.  
“ or “  
” button, then  
Power connection  
Important: The TV set is designed to operate on 220-240 V  
AC, 50 Hz.  
• After unpacking, allow the TV set to reach the ambient room  
temperature before you connect the set to the mains.  
3- Select START with the “  
the “ ” button to start APS.  
“ or “  
” button, then press  
Aerial Connections  
APS (Automatic Programming System) automatically pro-  
grammes the received channels in your TV’s programme  
numbers. During APS, "A. P. S. IS RUNNING" will be dis-  
played. After APS is finalized, the “PROGRAM.” menu ap-  
pears.  
• Connect the aerial plug to the aerial input socket located at  
the back of the TV.  
How to connect the external equipments  
To cancel APS, press the “ ” button.  
See “Connect the External Equipments” on page 25.  
You can delete a channel, insert a channel into a programme  
number, or re-start APS with the “PROGRAM.” menu.  
• See the instruction manuals provided with the external de-  
vices too.  
For details, see “Program. (Programming) Menu” on page  
22.  
Inserting batteries in the remote control handset  
• Remove the battery cover located on the back of the hand-  
set by gently pulling upwards from the indicated part.  
4- Press the "STANDARD" button to complete the initial set-  
tings.  
• Insert two AA (R6) or equivalent type batteries inside.  
After the initial settings are complete, you can change a pro-  
gramme number or to name a programme number or to pro-  
gramme new channel manually. For details, see “Install.  
Menu” on page 21.  
• Replace the battery cover.  
If the message "PLEASE CHECK ANTENNA CABLE AUTO.  
PROGRAMMING SYSTEM" does not appear, follow the de-  
scription “Program. (Programming) Menu” on page 22 to  
select a menu language and the country where you are now  
located, and to use A.P.S..  
ENGLISH - 18 -  
 
Programme Selecting (Previous or next  
programme):  
• Press “  
• Press “  
” button to select the previous programme.  
“ button to select the next programme.  
Programme Selecting (direct access):  
Press digit buttons on the remote control handset to select  
programmes between 0 and 9. TV will switch to the selected  
program after a short delay.  
When you press first digit, second digit will be displayed with  
‘-’ symbol for 3 seconds. To select programmes between 10  
and 99 press corresponding digit buttons consecutively be-  
fore ‘-’ symbol on the second digit disappears. (e.g. for pro-  
gramme 27, first press 2 and then 7 while program number  
displayed as ‘2-’ )  
Menu System  
Operating with the onset buttons  
Your TV has been designed with a menu system. Display  
“MENU” (main menu) and enter one of five menus (SOUND,  
PICTURE, FEATURE, INSTALL. and PROGRAM.).  
Volume setting and programme selection can be made using  
the buttons on the front panel.  
Volume Setting:  
1- Press “MENU” button to display “MENU” (main menu).  
The menu titles will be displayed in the main menu.  
• Press “-  
” button to decrease volume or “  
+” button to  
increase volume, so a volume level scale will be displayed  
2- Press “  
“ or “  
” button to select a menu title, then  
on the screen.  
press “ ” or “ ” button to enter the menu.  
To exit a menu, press “STANDARD” button.  
To go to the previous menu, press “MENU” button.  
Programme Selecting:  
• Press “P ” button to select next programme or “ P” but-  
ton to select the previous programme.  
Sound Menu  
Entering Main Menu:  
To change sound settings:  
• Press “MENU” button to enter main menu. In the main  
menu select submenu using “P ” or “ P” button and enter  
• Press “MENU” button, now you are in main menu. In the  
main menu, select SOUND using “  
then enter the sound menu pressing “ ” or “ ” button.  
or,  
“ or “  
” button,  
the submenu using “ +” or “-  
” button. To learn the us-  
age of the menus, refer to “Menu System” on page 19.  
Operating with Remote Control  
• Enter the Sound Menu directly, pressing the RED button.  
The remote control handset of your TV is designed to control  
all the functions of the model you selected. The functions will  
be described in accordance with the menu system of your  
TV.  
Setting Volume:  
As you enter the sound menu, Volume will be the first select-  
ed option.  
• Press “ ” button to increase volume.  
• Press “ ” button to decrease volume.  
Functions which you can use out of menu system are de-  
scribed below.  
Volume Setting:  
Press “ ” button to increase volume.  
Press “ ” button to decrease volume.  
Setting Balance:  
• Using “  
“ or “  
” button select Balance.  
• Press “ ” button to change balance rightward.  
• Press “ ” button to change balance leftward.  
ENGLISH - 19 -  
 
Setting Bass Level:  
• Using “ “ or “ ” button select Bass.  
Picture Menu  
To change picture settings:  
• Press “ ” button to increase bass level.  
• Press “ ” button to decrease bass level.  
• Press “MENU” button, now you are in main menu. In the  
main menu, select PICTURE using “  
then enter the picture menu pressing “ ” or “ ” button.  
or,  
“ or “  
” button,  
• Enter the Picture Menu directly, pressing the GREEN but-  
ton.  
Setting Brightness:  
• As you enter the picture menu, BRIGHTNESS will be the  
first selected option.  
Setting Treble Level:  
• Press “ ” button to increase BRIGHTNESS.  
• Press “ ” button to decrease BRIGHTNESS.  
• Using “  
“ or “  
” button select Treble.  
• Press “ ” button to increase treble level.  
• Press “ ” button to decrease treble level.  
Setting Contrast:  
• Using “  
“ or “  
” button select CONTRAST.  
Selecting Mode:  
• Press “ ” button to increase CONTRAST level.  
• Press “ ” button to decrease CONTRAST level.  
You can choose MONO, STEREO or DUAL I-II mode, only if  
the selected channel supports that mode.  
• Using “  
“ or “  
” button select Mode.  
• Press “ ” or “ ” button to change Mode.  
• If the TV channel you are watching broadcasts in two lan-  
guages (e.g. Eurosport), you can select the dubbed or the  
original language.  
• When the stereo broadcast is received poorly, you can  
change from stereo to mono sound so that you can hear the  
broadcast more clearly and easily.  
Setting Colour:  
• Using “  
“ or “  
” button select COLOUR.  
• Press “ ” button to increase COLOUR level.  
• Press “ ” button to decrease COLOUR level.  
Setting Effect:  
You can use this feature to switch on and off sound effect.  
Pressing “ ” or “ ” button will turn on and off this feature. If  
the current sound system is mono and the sound effect is  
set ON, then the sound will be heard as if it is stereo. If the  
current sound system is stereo, switching this effect on will  
make the sound deeper. Switching it off will make no change  
in mono and stereo.  
Setting Sharpness:  
• Using “  
“ or “  
” button select SHARPNESS.  
• Press “ ” button to increase SHARPNESS level.  
• Press “ ” button to decrease SHARPNESS level.  
ENGLISH - 20 -  
 
During the last minute of the count down, the timer is dis-  
played on the upper right of the screen. When the timer  
reaches zero, TV goes to stand-by.  
Setting Hue (In AV mode only) :  
• Using “ “ or “ ” button select HUE.  
• Press “ ” button to increase HUE level.  
• Press “ ” button to decrease HUE level.  
Child Lock:  
In Feature Menu, press “  
CHILD LOCK. Using “ ” or “ ” button turn CHILD LOCK On  
or Off.  
“ or “  
” button to select  
HUE adjust is functional only when NTSC 3.58/4.43 is ap-  
plied in AV mode. It does not appear when other colour sys-  
tems used.  
When Off is selected, there will be no difference in the opera-  
tion of your TV. When On is selected, the TV can only be  
controlled by the remote control handset. In this case, the  
front panel buttons (except the Switch On/Off button) will not  
work.  
Mode:  
This option is used to change the picture size according to  
the coming transmission.  
Language:  
• If AUTO function is selected, then the picture size will be  
automatically changed according to the transmission.  
Menu Language can be selected by pressing “ ” or “ ” button  
• Selecting 4 : 3 mode forces picture ratio size to 4 : 3.  
• Selecting 16 : 9 mode forces picture ratio size to 16 : 9.  
on LANGUAGE item.  
Every program has its own picture mode setting. When you  
store the picture mode for a program other programs keep  
their picture mode setting unaffected.  
AV-2 Output:  
You can use this feature to select the internal or external  
source that will be output at AV-2 (EXT.2) terminal.  
TV or AV-1 can be chosen by pressing “ ” or “ ” button on  
"AV-2 OUTPUT".  
Feature Menu  
• Press “MENU” button, now you are in main menu. In the  
main menu, select FEATURE, using “  
Then enter the feature menu pressing “ ” or “ ” button.  
or,  
“ or “  
” button.  
• Enter the Feature Menu directly, pressing the YELLOW  
button.  
Install. Menu  
Sleep Timer:  
• Press “MENU” button, now you are in main menu. In the  
• As you enter the feature menu, SLEEP TIMER will be the  
first selected option.  
main menu, select INSTALL. using “  
then enter the Installation menu pressing “ ” or “ ” button.  
or  
“ or “  
” button,  
• Use “ ” or “ ” button to change the value of the sleep timer  
between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00, 1:15:00,  
1:30:00, 1:45:00 and 2:00:00. hours. Your TV will get into  
standby mode when the period you selected passes after  
you make the selection.  
• Enter the Installation Menu directly, pressing the BLUE but-  
ton.  
It is displayed on the upper right of the screen. If sleep timer  
is activated it is displayed with the TV status and erased with  
it after 3 seconds.  
ENGLISH - 21 -  
 
To programme a channel in a TV’s programme  
number manually:  
Program. (Programming) Menu  
PROGRAM. (Programming) menu is used to display the  
programme names and numbers. You can use this menu to  
delete a channel, to insert a channel and to autostore the  
programmes.  
1. PROGRAMME will be the first selected item as you enter  
the INSTALL. menu. Pressing “ ” or “ ” button select the  
programme number where you want to the tuned channel  
to be stored. (You may also type the programme number  
using the digit buttons.)  
Select the PROGRAM. menu pressing “  
“ or “  
” but-  
ton and open it pressing “ ” or “ ” button. When you enter the  
programme menu, all the programme numbers and names  
will be displayed on the screen. The programme number and  
name of the tuned channel will be shown by the cyan color.  
All the other channel numbers will be white. You can move  
the number in cyan using “  
“ or “  
” or “ ” or “ ” button.  
Also, it's possible to use digit buttons to select programme  
numbers. As you pass through the programme numbers this  
way, to reach the programme number you want, the channels  
corresponding to the programme numbers you pass through  
will be tuned and the selected programme number will be  
shown in cyan.  
2. Press “  
“ or “  
” button to select BAND. Using “ ” or  
“ ” button to select the band in which you want to search a  
channel.  
3. Press “  
“ or “  
”button to select SEARCH. Press “ ”  
or “ ” button to start searching. (Press “ ” button to search  
forward.Press “ ” button to search backwards.)  
If the found channel is not the desired one, press “ ” or “ ”  
button to start searching again.  
To stop searching before a channel is found, press the re-  
verse direction button. For example, when the TV is search-  
ing forward with “ ” button, press “ ” button to stop searching.  
If you know the channel number which you want to find, you  
can find the channel directly.  
To change the name of a programme:  
Press “  
“ or “  
” button to select CHANNEL, then press  
“ ” or “ ” button to select the channel number, or enter the  
number with the digit buttons.  
• Move to the channel you want to rename or use the digits  
so that the selected programme number is in cyan color.  
4. If you want to name the new programme, follow the instruc-  
tions under "To change the name of a programme" on  
page 22.  
• Press the RED button. Use “ ” or “ ” button to select the  
position and press “  
“ or “  
” button to select a letter.  
Now, press the RED button again to store or BLUE button to  
cancel NAME.  
5. If the channel reception is poor, fine-tune the channel.  
Press “  
“ or “  
” button to select FINE TUNING,then  
To delete a channel from a programme number:  
press “ ” or “ ” to fine-tune the channel.  
6. After the all settings are completed, store the new  
channel’s setting to the programme number which you se-  
• Move to the channel you want to delete or use the digits so  
that the selected programme number is in cyan color.  
lected. Press “  
then press “ ” or “ ” to store it.  
“ or “  
” button to select STORE,  
• Press the YELLOW button. Now the corresponding channel  
will be deleted and all the other channels below this pro-  
gramme number will be moved one programme number up.  
If you want to modify the current programme number’s  
setting (for example, changing fine tuning, etc.) :  
Now, press the YELLOW button again to delete or BLUE but-  
ton to cancel DELETE.  
1. Select the programme number you want to modify the  
settings while no menu appears.  
To insert a channel into a programme number:  
2. Display the INSTALL. menu.  
• Move to the channel to be inserted or use the digits so that  
the selected programme number is in cyan color.  
3. Follow “To programme a channel in a TV’s program-  
me number manually:” on page 22 and change the  
settings of the current programme number.  
• Press the GREEN button. Now using “  
“ or “  
” or “ ”  
or “ ” buttons, move to the programme number.  
If you want to name the new programme, follow the in-  
structions under "To change the name of a programme"  
on page 22.  
Now, press the GREEN button again to insert or BLUE button  
to cancel INSERT.  
A.P.S.  
Note:  
Do not use Programme item in the INSTALL. menu to select  
the programme number. If you select the programme number  
with Programme item and store the settings, the selected  
programme number’s current settings are cancelled.  
If you enter the A.P.S. menu, you can automatically program-  
me the received channels in your TV’s programmes with  
A.P.S. ( Automatic programme system ).  
1. After displaying the PROGRAM. menu, press the BLUE  
button to enter the A.P.S. menu.  
2. Select LANGUAGE with the “  
“ or “  
” button, then  
press the “ ” or “ ” button to select a menu language.  
ENGLISH - 22 -  
 
3. Select COUNTRY with the “  
press the “ ” or “ ” button to select the country you are  
“ or “  
” button, then  
Standard  
You can re-set the current PICTURE menu settings (except  
Picture Mode setting) to the default settings.  
now located.  
4. If you want to start programming, select START with the  
• Press “STANDARD” button when no menu appears.  
“ or “  
” button, then press the “ ” button. The  
message “A.P.S. IS RUNNING” appears and A.P.S. auto-  
matically programmes the received channels in your TV’s  
programme numbers. Afrer A.P.S. is finalized, the PRO-  
GRAM. menu appears again.  
VCR Control Buttons  
The buttons can be used to operate a JVC brand VCR.  
Pressing the button having the same appearance as the origi-  
nal remote control button of a device makes the function work  
in the same way as the original remote control.  
To cancel A.P.S., press the “ ” button.  
Press the VCR Control Button to control your VCR.  
Note:  
• If your device is not made by JVC, these buttons cannot be  
used.  
• Even if your device is made by JVC, some of these buttons  
or any one of the buttons may not work, depending on the  
device.  
• You can use the  
/
buttons to choose a TV channel  
which the VCR will receive.  
Teletext  
Teletext is an information system that displays text on your  
TV screen. Using the Teletext information system you can  
view a page of information on a subject that is available in the  
list of contents (index).  
Other Features  
Sound Mute  
No on screen display will be available in text mode.  
To cut off the sound of the TV, press “ ” button. The sound  
No contrast, brightness or colour control, but volume control  
is available in text mode.  
will be cut off. To cancel mute, press “ ” or “ ” or “ ” but-  
ton. The volume level will be the same as the level before  
mute when you cancel mute.  
To operate Teletext  
• Select a TV station on which Teletext is being transmitted.  
Information on Screen  
• Press (TELETEXT) “ ” button. Usually the list of contents  
(index) is displayed on the screen.  
First pressing the “ ” button displays the current status  
Programme number”, “Station name” and “Sound sta-  
tus”.  
Pressing this button again displays the current time.  
Pressing this button once more remove the on-screen dis-  
play.  
To select a page of Teletext  
• Press the appropriate digit buttons for the required Teletext  
page number.  
The selected page number is displayed at the top left corner  
of the screen. The Teletext page counter searches until the  
selected page number is located, so that the desired page is  
displayed on the screen.  
To Display the Time  
• While watching a TV programme with Teletext transmission  
• Press “  
one page at a time.  
“ button to move the Teletext screen forward  
press “ “ button twice. The current time information, cap-  
tured from Teletext will be displayed on the screen.  
• Press “  
one page at a time.  
” button to move the Teletext screen backward  
• If the programme being watched does not have Teletext  
transmission, only a box will be displayed at the same loca-  
tion.  
• The time information will disappear after pressing “ “ but-  
ton again.  
When time information is displayed on screen, entering an-  
other menu will remove it.  
ENGLISH - 23 -  
 
To Select Index Page  
Fastext and Toptext  
To select the page number of the index (generally page Teletext mode will be selected according to transmission au-  
tomatically.  
100), press “ “ button.  
Your TV supports the 7 page Teletext system. When the  
page number of any of the 7 pages in memory is entered, the  
system will not search for the requested page; instead it will  
display the page automatically.  
Searching for a teletext page while watching TV  
• In the Teletext mode pressing “ “ button will switch the  
screen to the TV mode. In the TV mode enter a page num-  
ber using digit keys. As you enter last digit of page number,  
• Press “  
“ button to move the Teletext screen forward  
” sign will replace the page number and flash until the  
one page at a time.  
entered page number is found. Then the page number will  
replace “ ” sign again. Now you can display this teletext  
page pressing “ “ button.  
• Press “  
one page at a time.  
” button to move the Teletext screen backward  
For Fastext and Toptext:  
To Select Double Height Text  
The subject-heading for the information may have a particular  
colour or can be in a form located in a coloured box.  
• Press “ “ button for the top half of the information page to  
be displayed in double height text.  
• Press an appropriate RED, GREEN, YELLOW or BLUE but-  
ton in order to reach the relevant page quickly.  
• Press “ “ button again for the bottom half of the informa-  
tion page to be displayed in double height text.  
For Toptext:  
• Press “ “ button once more for the full page of normal  
height text.  
If Toptext transmission is present, colour coded buttons will  
appear in status row.  
To Reveal “concealed” Information  
If Toptext transmission is not present, status row will not ap-  
pear.  
• Pressing “ “ button once will reveal answers on a quiz or  
games page.  
In Toptext mode the “  
“ or “  
” commands will request  
the next or previous page respectively. If Toptext transmission  
is not available, in case of operation of these commands,  
wraparound occurs. For example page 100 appears to be one  
greater than page 199.  
• Pressing “ “ button again will conceal the revealed an-  
swers.  
To Stop Automatic Page Change  
The teletext page you have selected may contain more infor-  
mation than what is on the screen; the rest of the information  
will be displayed after a period of time.  
• Press “ “ button to stop the automatic page change.  
• Press “ “ button again to allow the next page to be dis-  
played.  
To Select a Subcode Page  
Subcode pages are subsections of long Teletext pages that  
can only be displayed on the screen one section at a time.  
• Select the required Teletext page.  
• Press “ “ button.  
• Select the required subcode page number by pressing four  
digit buttons (e.g. 0001).  
• If the selected subcode page is not displayed in a short  
time, press “ “ button. TV programme will be displayed on  
the screen.  
Teletext page number will be displayed on the upper left cor-  
ner of the screen when the selected page is found.  
• Press “ “ button to display the selected Teletext page.  
To exit Teletext  
• Press “ ” button. The screen will switch to TV mode.  
ENGLISH - 24 -  
 
Connect the External Equipments  
Before connecting anything  
• Switch off all equipments including the TV.  
• Read the manuals provided with the equipments.  
To select an AV mode  
Pressing “AV” button on the remote control selects one of four AV modes (AV- 1, AV-2, AV-2 S and F-AV).  
To return to the TV mode, repeatedly press “AV” button or press “  
AV-1 (EXT.1) terminal: Euroconnector (21-pin, SCART)  
• Video input, Audio L/R inputs and RGB inputs are available.  
• TV broadcast outputs (Video and Audio L/R) are available.  
AV-2 (EXT.2) terminal: Euroconnector (21-pin, SCART)  
• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.  
• Video and Audio L/R outputs are available.  
“ or “  
” button.  
F-AV (Front AV) terminal: RCA connectors x 3  
• Video input and Audio L/R inputs are available.  
FRONTAV  
ENGLISH - 25 -  
 
Via the Euroconnector  
Tips  
Your TV set has two Euroconnector sockets. If you want to  
connect equipments (e.g. video recorder, decoder, etc.) which  
have Euroconnectors, to your TV, use the AV-1 (EXT.1) or  
AV-2 (EXT.2) terminals.  
Care of the Screen  
Clean the screen with a slightly damp, soft cloth. Do not use  
abrasive solvents as they may damage the TV screen coating  
layer.  
If an external device is connected via Euroconnector sockets  
TV is switched to AV mode automatically.  
Poor Picture  
RGB mode  
Have you selected the correct TV system? Is your TV set or  
house aerial located too close to the loudspeakers, non-  
earthed audio equipment or neon lights, etc. ?  
Mountains or high buildings can cause double pictures or  
ghost images. Sometimes you can improve the picture quali-  
ty by changing the direction of the aerial.  
The picture quality may degrade when two peripherals are  
connected to the TV at the same time. In such a case, dis-  
connect one of the peripherals.  
If an equipment can output the RGB signals, connect it to the  
AV-1 (EXT.1) terminal.  
AV-2 S Mode  
If the equipment connected to your TV set supports S-Video  
(Y/C) output from Euroconnector, you can have a better pic-  
ture quality by selecting AV-2 S mode and connecting your  
equipment to the AV-2 S (EXT.2) terminal of TV. See your  
equipment's booklet to check if your equipment has such fea-  
ture.  
No Picture  
Is the aerial connected properly? Are the plugs connected  
tightly to the aerial socket? Is the aerial cable damaged? Are  
suitable plugs used to connect the aerial? If you are in doubt,  
consult your dealer.  
No Picture means that your TV is not receiving any trans-  
mission. Have you pressed the correct keys on the remote  
control? Try once more.  
Via the RCA jacks  
If you have an equipment (such as a Camcorder) which has  
the RCA jacks, connect it to the F-AV (Front AV) terminal  
with the video and audio cables.  
• If the epuipment has the mono audio jack, connect it to the  
AUDIO-L jack.  
Sound  
Via the ANT (aerial) socket  
Sound is coming from only one of the speakers. Is the bal-  
ance set to one direction extreme? See SOUND menu.  
If your equipment does not have an Euroconnector or RCA  
jacks, connect it to the TV with an aerial cable. For details,  
see the manual provided with the equipment.  
Remote Control  
Your TV no longer responds to the remote control. Press the  
STANDARD” button on the remote control once more. Per-  
haps the batteries are exhausted. If so you can still use the  
local buttons at the front of your TV.  
Have you selected the wrong menu? Press “STANDARD” but-  
ton to return to TV mode or press “MENU” button to return to  
the previous menu.  
To store the test signal that comes from the equipment, see  
"Install. Menu" on page 21 and store it to the programme  
number 0. You can watch images from that equipment to  
select the programme number which you stored the test  
signal.  
TV and Video Recoder (VCR)  
• Connect the Video Recorder to the ANT (antenna input)  
socket of the TV with the aerial cable.  
No solution  
Switch your TV set off and on. If this does not work, call the  
service personnel; never attempt to repair it yourself.  
• Connect the Video Recorder to the AV-1 or AV-2 terminal  
with the SCART cable, or connect it to the F-AV (Front AV)  
terminal with the audio and video cables.  
NTSC Playback  
Connect a NTSC video recorder to a terminal. Then press  
AV“ button to select the corresponding AV mode.  
NTSC 3.58/4.43 system is detected automatically in AV  
mode.  
Copy Facility  
You can output the video and audio signals which inputs from  
TV or AV-1 (EXT.1) terminal to the video recorder connected  
to the AV-2 (EXT.2) terminal.  
To select the output source, see “AV-2 OUTPUT” on page  
21.  
Connecting Headphones  
Use the stereo headphone socket of your TV, to connect  
headphones.  
ENGLISH - 26 -  
 
Specifications  
TV BROADCASTING .......................................... PAL B/G  
RECEIVING CHANNELS..................................... VHF (BAND I/III)  
UHF (BAND U)  
HYPERBAND  
CABLE TV (S01-S41 / S75-S79)  
NUMBER OF PRESET CHANNELS ................... 100  
CHANNEL INDICATOR ........................................ On Screen Display  
RF AERIAL INPUT .............................................. 75 Ohm (unbalanced)  
OPERATING VOLTAGE ...................................... 220-240V AC, 50 Hz.  
SOUND-MULTIPLEX SYSTEMS.......................... Nicam + German Stereo  
PICTURE TUBE .................................................. For 28”  
AUDIO OUTPUT POWER  
(WRMS.) (%10 THD) .................................. 2 x 10  
POWER CONSUMPTION (W) (max.).................. 135  
DIMENSIONS (mm) ....................................AV-28KM3BN  
AV-28KM3SN  
D........................................................................ 480  
L ........................................................................ 770  
H........................................................................ 580  
Weight (Kg.)....................................................... 33,2  
ENGLISH - 27 -  
 

Ingersoll Rand Swimming Pool Pump 670049 X User Manual
Insignia TV DVD Combo NS LTDVD26 09CA User Manual
IPSO Clothes Dryer DR50 User Manual
JVC DVD Player XV N450BUC User Manual
Kathrein TV Cables ESD 08 User Manual
Kenmore Carpet Cleaner 11485925 User Manual
King Canada Saw 8392N User Manual
KitchenAid Oven KEBC147VBL00 User Manual
KitchenAid Pasta Maker KPCA User Manual
Kramer Electronics Bluetooth Headset BT 1 User Manual