Insignia Car Speaker NS PSD5321 User Manual

Quick Setup Guide NS-PSD5321/NS-PSD5321-C  
I
Powered Computer Speakers with Subwoofer  
3 Connect the satellite speakers to the subwoofer by  
plugging the connector into the “To Speaker” jack  
on the subwoofer.  
4 Plug the AC cable into a wall outlet or power strip.  
Congratulations on your purchase of a  
high-quality Insignia product. Your  
NS-PSD5321 speaker system is designed  
for reliable and trouble-free performance.  
PACKAGE CONTENTS  
SETTING UP YOUR SPEAKER SYSTEM  
Satellite speakers (2)  
Subwoofer with Control pod  
Quick Setup Guide  
Positioning your speaker system  
1 Place the speakers on opposite sides of the device  
they are connected to and as far apart as possible.  
2 Place the subwoofer on the floor.  
FEATURES  
Multi-function Control Pod  
Subwoofer  
5 Turn on the computer and your speaker system.  
6 Use the master and bass volume controls on the  
control pod to control the volume of your speaker  
Connecting to a computer  
system.  
Note: You may need to adjust volume levels on your  
computer or source devices as well.  
1 Make sure that the computer and your speaker  
system are turned off and unplugged from the  
power outlet.  
2 Connect the control pod to your computer by  
plugging the AUX cable with the green connector  
that is hardwired into the control pod into the  
audio line out, speaker, or headphone jack on the  
computer (this jack is usually green).  
Connecting to portable audio devices  
1 Make sure that the portable audio device and your  
speaker system are turned off and unplugged.  
2 Connect the headphone jack of your audio device  
to the AUX input jack on your control pod using an  
AUX cable (not included).  
#
ITEM  
DESCRIPTION  
1
2
3
Power LED  
Lights blue when the speaker system is turned on.  
Master volume control  
Rotate clockwise to turn the volume up or counter-clockwise to turn the volume down.  
(headphone)  
output jack  
Plug your headphones into this jack.  
Note: With headphones connected, speaker sound will be muted.  
Connect a second source, such as an MP3 player, to this jack.  
Slide the switch on the back of the control pod to turn on/off the speaker system.  
Connects the control pod to the subwoofer.  
4
5
6
7
8
AUX input jack  
Power switch  
AUX cable  
(not included)  
Subwoofer cable  
AUX cable  
Connect this cable to an audio line out jack (usually green) on a computer.  
3 Plug the AC cable into a wall outlet or power strip.  
4 Turn on the audio device and your speaker system.  
5 Use the controls on your audio device to control  
playback.  
AUX cable with  
green connector  
Rotate clockwise to turn bass volume up or counter-clockwise to turn bass volume  
down.  
BASS volume control  
The control pod wire is permanently attached to the subwoofer here.  
Plug the connector from the speakers into this jack.  
9
Control pod wire  
Notes:  
• This connection will override your computer source  
connection while it’s plugged in.  
• You can control playback volume using the control pod.  
10 To Speaker jack  
11 Power cord  
The power cord is permanently attached to the subwoofer here.  
 
Before using your new product, please read these instructions to prevent any damage.  

Insignia DVD Player NS 2BRDVD User Manual
IOGear Network Card GBU521 User Manual
JBL Speaker System SG2020 User Manual
Jensen Car Stereo System JRV210 User Manual
JL Audio Car Amplifier J210001 User Manual
Kenwood Car Stereo System DPX MP2100 User Manual
Kenwood Speaker B61 1370 00 01 User Manual
KitchenAid Double Oven KEBS246Y User Manual
Konica Minolta Digital Camera Q M100 User Manual
Krell Industries DVD Player DVD Standard User Manual