Insignia Bluetooth Headset NS CAHBTEB01 User Manual

V2  
FINAL  
FOR PRINT  
NS-CAHBTEB01_15-0448_QSG_V2_EN.ai 1 4/22/2015 11:12:35 AM  
Final flat size: 304.8 x 177.8 mm  
Final fold size: 76.2 x 177.8 mm  
|
Quick Setup Guide NS-CAHBTEB01  
Bluetooth Headset  
Manually pairing your Bluetooth device  
1 Press and hold (call) to enter pairing mode. The  
LED blinks red and blue.  
PACKAGE CONTENTS  
CHARGING YOUR HEADSET  
A tone sounds (every 60 seconds) and the LED  
flashes red when your headset battery is low.  
• Bluetooth Headset  
• USB charging cable  
• Earbuds (small and large)  
Quick Setup Guide  
2 Make sure that your Bluetooth device is within  
Connect the USB charging cable from your  
headset’s charging port to a USB port.  
33 ft. (10 m) of your headset.  
3 Turn on your Bluetooth device, turn on Bluetooth,  
then set your device to pairing mode. For more  
information, see the documentation that came  
with your Bluetooth device.  
4 On your Bluetooth device, select  
NS-CAHBTEB01. The LED lights blue and a tone  
sounds when your headset pairs to your  
Bluetooth device.  
FEATURES  
High-quality stereo sound from Bluetooth 4.0 enabled devices  
Battery lasts 12 hours (talk), 10 hours (music)  
Inline controls easily adjust audio  
Curved design fits comfortably around the neck  
Rewind/Skip back  
Pairing two devices  
1 Pair your headset to your secondary Bluetooth  
device first. See "Pairing your first Bluetooth  
device" for instructions.  
Fast forward/Skip forward  
PAIRING YOUR HEADSET  
2 Press and hold (call) on your Bluetooth headset  
Pairing your first Bluetooth device  
to enter pairing mode.  
1 Slide the power switch to ON. The LED blinks red  
and blue and the headset enters pairing mode.  
Play/Pause  
3 Connect your primary Bluetooth device to your  
Bluetooth headset. See "Manually pairing your  
Bluetooth device" for instructions.  
Charging port  
4 Re-pair your secondary Bluetooth device to your  
Bluetooth headset. See "Manually pairing your  
Bluetooth device" for instructions.  
Neck strap  
Note: When connected to two phones, the  
headset calling functions will work with the  
primary phone.  
Earbud (R)  
Power switch  
2 Make sure that your Bluetooth device is within  
33 ft. (10 m) of your headset.  
3 Turn on your Bluetooth device, turn on Bluetooth,  
then set your device to pairing mode. For more  
information, see the documentation that came  
with your Bluetooth device.  
Disconnecting and reconnecting your paired  
device  
Your headset remembers up to six Bluetooth devices  
and will turn off after three minutes if it is not paired  
to a Bluetooth device.  
Microphone  
Earbud (L)  
Call button/LED indicator  
Volume down  
Volume up  
4 On your Bluetooth device, select  
NS-CAHBTEB01. The LED lights blue and a tone  
sounds when your headset pairs to your  
Bluetooth device.  
To reconnect…  
To disconnect…  
Turn on your headset .Your headset  
searches for the last connected  
Bluetooth device and reconnects.  
Turn off your headset  
Before using your new product,  
please read these instructions to prevent any damage.  
 

Inglis Home Appliances Range Range User Manual
Intel Network Card G52 B1032X1 User Manual
Jet Tools Saw JWBS 18X User Manual
JL Audio Car Speaker TR650 CXI User Manual
John Deere Air Compressor AC2 80ES User Manual
Karcher Vacuum Cleaner K 5500 User Manual
Keating Of Chicago Fryer 10x11 TS Gas User Manual
Kenmore Sewing Machine 385160201 User Manual
Klipsch Speaker RC 62 User Manual
Korg Musical Instrument Dynamic Phrase Synthesizer User Manual