Ingersoll Rand Outboard Motor 45541935 User Manual

Installation Instructions  
Limit Switch Kit for B006 Barring Motor (45541935)  
Product Safety lnformation  
Intended Use:  
This product is designed to be mounted on an lngersoll Rand B006 Barring Motor. It prevents voltage from being applied to an engine starting  
system while the Barring Motor is engaged with the Ring Gear of the Engine.  
For additional information:  
Refer to Barring Motors Product Safety lnformation Manual Form 45526654.  
Product Specifications  
Switch: Normally closed  
Maximum voltage: 250 Volts  
Maximum current: 10.1 Amps  
Connectors: .110 inch solder lug male terminals (2)  
Operation  
When the Barring Motor is disengaged from the Engine Ring Gear, the switch is closed, and voltage can reach the solenoid to start the Engine.  
When the Barring Motor is engaged with the Engine Ring Gear, the switch is open, and voltage cannot reach the solenoid to start the Engine.  
Installation  
1. Remove two of the three 1/4-inch Socket Head Cap screws from Air Motor Assembly. Insert the screws through the Bracket (1) into the  
Air Motor Assembly and torque to 4.5/5.0 ft.lbs.  
2. Remove two of the six 5 mm Socket Head Cap screws that hold the Ring to the Barring Motor Housing. Insert the screws through the holes  
in the Plate (2), into the holes in the Housing, and apply Loctite #243 - torque to 4.5/5.2 ft.lbs.  
3. Connect the wire from the voltage supply to a terminal on the Limit Switch (5).  
4. Connect the wire from the starter to the other terminal on the Limit Switch (5).  
5. Place the Limit Switch (5) on top of the Bracket (1). Insert the two #2 Socket Head Cap screws (4) through the holes in the Cover (3), through  
the holes in the Limit Switch (5), into the holes in the Bracket (1), and tighten.  
Illustration  
2
1
3
4
5 mm Socket Head Cap Screw  
5
1/4" Socket Head Cap Screw  
(Dwg. 45540911)  
Limit Switch Kit Parts List  
Item  
Part No.  
45540754  
45540713  
45540671  
45540663  
45540648  
45546181  
Description  
Qty.  
1
2
3
4
5
6
Bracket  
Plate  
1
1
1
2
1
1
Cover  
Cap Screw  
Limit Switch  
Installation Sheet  
45546181  
Edition 1  
June 2007  
© 2007 Ingersoll Rand Company  
 

Ingersoll Rand Heat Pump 650875 XXX C User Manual
Iomega Computer Drive 3868601 User Manual
Jensen Flat Panel Television JE2608WV User Manual
JL Audio Car Speaker VR650 CXi User Manual
John Lewis Freezer JLFFW1807 User Manual
John Lewis Refrigerator JLLFW1602 User Manual
KitchenAid Cooktop 8284908 User Manual
KitchenAid Double Oven KEBI141X User Manual
KitchenAid Saw KSDG950E User Manual
Kodak Digital Camera C 503 User Manual