Ingersoll Rand Marine Sanitation System 650532 1 User Manual

650532–X  
OPERATOR’S MANUAL  
ALSO INCLUDE MANUALS: 6711X-XPUMP, 651615 SINGLE POST LIFT/RAM & FM 3637-2 GEN INFO SHEET  
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE  
650533–X  
RELEASED: 3–6–95  
(REV. A) IPP  
650532–1  
650533–1  
3” AIR MOTOR  
21.7:1 RATIO  
CARBON STEEL  
STAINLESS STEEL  
PUMP SYSTEM  
2 1/4” STROKE  
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,  
OPERATING OR SERVICING THIS EQUIPMENT  
.
SERVICE KITS  
Control Panel  
(See Page 2)  
Pump Air  
Manifold  
Use only genuine ARO replacement parts to assure compatible  
pressure rating and longest service life.  
637066-B for repair of Air Motor Section.  
63729X-XXX for repair of Lower Pump 6710X-X.  
GENERAL DESCRIPTION  
WARNING DO NOT EXCEED MAXIMUM OPERATING  
PRESSURE OF 3,262 P.S.I. (224.9 BAR) AT 150 P.S.I. (10.4  
BAR) AIR INLET PRESSURE.  
WARNING REFER TO GENERAL INFORMATION SHEET  
FOR ADDITIONAL SAFETY PRECAUTIONS AND IMPORĆ  
TANT INFORMATION.  
Material  
Outlet  
By delivering a smooth, continuous bead of the proper size, an ARO  
system helps the operator maintain both his production rate and proĆ  
duce quality standards. Maintained quality standards assures that the  
material benefits are realized. To further maximize operator production  
time, the ARO System has a built-in lift/ram feature for quick and easy  
drum changeover.  
ARO Systems are totally enclosed, sealing the material in the system  
from air and moisture, preventing premature cure-out of the material.  
This allows for either continuous or intermittent use of the system and  
reduces the need for daily system clean-up.  
Built-in lift capability allows for quick drum changeover and easy lifting  
of pump assembly from container.  
66713  
Portability Kit  
(Optional)  
The 21.7:1 ratio is an expression of the relationship between the effecĆ  
tive air motor area and the effective lower pump area. When 150 PSI  
(10 bar) of air pressure is supplied to the air motor, thelowerpumparea  
will develop a maximum of 3,262 PSI (224.9 bar) of fluid pressure (at  
no flow) as the fluid control is opened, the flow rate will increase as the  
air motor cycle rate increases to keep up with the demand  
FIGURE 1  
MAJOR COMPONENTS LIST  
Item Description  
Qty Part No.  
Item Description  
Qty Part No.  
1 Single Post Ram  
1
1
1
651615  
3 Basic Pump Assembly (650532-1)  
Basic Pump Assembly (650533-1)  
OPTIONAL EQUIPMENT  
1
1
67110-P43  
67111-P43  
2 Follower Plate (650532-1)  
Follower Plate (650533-1)  
651840-1  
651841-1  
Portability Kit  
66713  
THE ARO CORPORATION D ONE ARO CENTER  
D
BRYAN, OHIO 43506–0151  
%
(419) 636–4242  
D
FAX (4D19PR) I6N3T6ED2IN11U5.S.A.  
E1995 THE ARO CORPORATION  
 
65153X-X PARTSLIST  
Drum Stop  
20"  
(508 MM)  
Air Inlet  
Air Hose  
622553-2  
Street Elbow  
Y43-4-C  
Y167-5 Adapter  
(1/4 NPT X 1/2 NPT  
BASIC PUMP  
6711X-XXX  
44.5"  
(1130.3 MM)  
Screws (4) Y6-63-C  
Washers (4) Y13-6-C  
1/2-14 NPT(F)  
Material Outlet  
FOLLOWER PLATE  
AIR SUPPLY VALVE  
Vent Plug  
Thumb Screw  
FIGURE 3  
22.5"  
(571.5 MM)  
PAGE 3 OF 4  
 
PN 97999-607  
PAGE 4 OF 4  
 

Indesit Refrigerator BAAN 134 User Manual
Infantino Baby Gym 206 402 User Manual
Infinity Speaker System Infinity Compact Powered Subwoofer User Manual
Ingersoll Rand Power Screwdriver 8655 B
Jensen Portable Radio CR1620 User Manual
JVC Camcorder 0110ASR SW VMC0S4 User Manual
JVC Car Stereo System KW XC838 User Manual
JVC TV VCR Combo HR VCD1 User Manual
Kenwood Juicer AT265 User Manual
Kenwood Marine Radio TK 7160 User Manual