I N S T A N T H O T W A T E R D I S P E N S E R S
Model SST-FLTR
Stainless Steel Tank with F-201 Filtration System*
*Water dispenser sold separately
Submittal Sheet
Specifications
Stainless Steel Tank dispenses filtered
near-boiling 200°F water instantly.
gallon tank
Capacity
dispenses 60 cups of
200ºF water per hour
•• F-201 Filtration System included for
•fresher tasting water
Electrical
120 volts A.C., 750
watts, 6.25 amp
heating element
with grounded
three (3) prong
plug
• 35% more near-boiling water from larger
2
3
gallon stainless steel tank
• Easy to adjust temperature control
• Tool-free tank connections and dry start
protection to ease installation
Thermostat
Insulation
Snap-action,
adjustable from
160ºF to 210ºF
(factory pre-set
at 200ºF)
• Provides 60 cups/hour of near-boiling water
• 3-Year We Come To You™ In-Home
Service Warranty*
Meets U.L. 94HF-1
flammability
specification
• 120 volts, 750 watts, 6.25 amps
• For use with In-Sink-Erator Series 1100 and
other dispenser models (Not for use with Model Hot1)
Recommended
Supply Pressure
30-125 psi
* The complete In-Sink-Erator warranty is
included in the Installation, Care & Use Booklet
packed with each unit.
Shipping Weight Approximately
4.2 lbs.
Dimensions
Sample Specification
2
• Capacity:
3
gallon tank dispenses 60 cups of
200°F water per hour
• Electrical: 120 volts A.C., 750 watts, 6.25 amp
heating element with grounded three (3)
prong plug
• Thermostat: Snap action, adjustable from 160°F
to 210°F (factory pre-set at approximately 200°F)
11"
ADJUSTABLE
THERMOSTAT
• Insulation: Meets U.L. 94HF-1 flammability
specification
• Recommended Supply Pressure: 30-125 psi
• Shipping Weight: Approximately 4.2 lbs.
DRAIN PLUG
6.125"
To ensure optimum performance, maximum
distance between tank and dispenser head
should be 16" or less.
DEPTH IS 6.75"
Job Specifications
The Emerson logo is a trademark and
a service mark of Emerson Electric Co.
In-Sink-Erator is a division of
Emerson Electric Co.
©IN-SINK-ERATOR Printed in USA
Form No. HWD 301-05H-19-12
|